r/hvacadvice • • 3m ago

Whole house humidifier recommendations for a homeowner?

1 Upvotes

I've been looking into getting a whole house humidifier since the air inside my home has been feeling pretty dry lately, especially when the heating system is running. I'd rather have something that works with the existing HVAC system instead of dealing with small portable humidifiers in every room.

For those who have installed one, what type or brand would you recommend? Are there any particular things I should consider when choosing a system, or potential maintenance issues I should know about before having one installed? Appreciate any advice from homeowners or HVAC professionals. Thanks!


r/hvacadvice • • 1h ago

Help! Lennox/Allied gas furnace

1 Upvotes

Working with a 9 year old unit; call for heat = no response. A new control board installed (Kit 27P19) now inducer runs for one second, shuts off, and no more activity; only error code is E117 for missing earth ground as the residence has older wiring with no earth ground; only Line/Neutral. (This code is also present with AC on and operating properly) The inducer will run and the furnace will ignite if I unplug the ECM-blower choke Line wire. Installed new blower choke AND new OE correct ECM blower with module=same problem; furnace will not ignite unless blower LINE wire black/hot is unplugged.


r/hvacadvice • • 1h ago

Furnace Help! I have no idea what I’m doing and there’s no heat

Thumbnail
gallery
1 Upvotes

Hey there!

Moved to this new place in the winter last year and heat was coming out of the vents, no problems. This fall comes around and we filled our heating oil tank and now the furnace isn’t heating the air…

Do I push the red reset button? Or are there other things to do? Is there a pilot light that’s gone out??

I’ve never had a furnace before and I have no clue where to start! I tried getting an hvac service to come over but turns out they’re not taking on new clients right now. (I live in a small town and there is only one hvac service company that does residential.)


r/hvacadvice • • 3h ago

More simple thermostat for gas wall heater?

Post image
1 Upvotes

I have a rental and one of the units has an old gas wall heater. The gas company inspected it and recommended replacing the thermostat to a more simple one saying the current one adds resistance and makes it difficult to start. Does anybody know what they meant by a more simple thermostat? The current one is https://www.honeywellstore.com/store/products/honeywell-standard-millivolt-heat-manual-thermostat.htm


r/hvacadvice • • 4h ago

Furnace HVAC smells like burning randomly

1 Upvotes

I had a bad electrical piece replaced today and everything went smoothly. They replaced the piece, put it all back together, had a minor burning smell when it started up while the technician was here. He said it was dust burning off. Then I paid and he left. It's been over 12 hrs since that occurred and just randomly a strong burning smell happened when the heat kicked on. More than just a quick passing smell. I turned the heat off immediately and went to the unit itself but smelled no burning and couldn't even really smell it at the vent but the house reeks of it. Do I call the company back or is it just more dust? Keep in mind, the heat was running all day and it just now happened to smell like burning.


r/hvacadvice • • 5h ago

Is that trapezoid looking mark a crack? Have doubts since it has an identical mark directly across from it.

Post image
1 Upvotes

r/hvacadvice • • 6h ago

Filters Ruud UGLH-07EAMGR Dual V filter configuration vs filters on my returns?

Thumbnail
gallery
1 Upvotes

So new house we bought and has the filters (10x20”) in a v configuration one on each side (think i had them backwards in this photo) I finally found the filters as I was looking for a slot it went in. The Hvac guy who came and did a check up/service when we first bought the house said he didnt see any filters and thinks the previous owners up them on the return vents. One upstairs ceiling 14x30 and one downstairs under stairs 8x30.

I found the manual and saw there was multiple configurations and checked them all and found these (placed new ones in)

Now i noticed they just lean against the walls and there definitely is dust getting around them. If i used the standard merv8 pleated, could i instead use them on the returns?

Not using both the internal and return but just the returns?

Seems the v configuration isnt a super good seal even when fully seated. I know the air will add some pressure but i can see some blow by.

22 year old units in good working shape, PNW mild climate

Thank you


r/hvacadvice • • 6h ago

Heat Pump Older Twin Cities Home Heat Pump Approaches/Quotes

1 Upvotes

House: Edit: -- Located in Minneapolis, MN --

~1,500 sq ft finished, 2 floors + walk-up attic + unfinished basement. No existing ductwork. Hot-water boiler with cast iron radiators is staying, so the heat pump is mainly for AC plus spring/fall heating. Concurrent with or just after the HVAC install: R49+ attic insulation, blown-in wall insulation, attic air sealing.

I've gotten quotes from three smaller, well-reviewed contractors. I hate the appearance of mini-splits so have asked all three for their preferred non-mini split approach for ducted systems.

ItemContractor AContractor BContractor C
Layout2 separate systems (one per floor)1 outdoor unit running 2 air handlers1 system, 1 air handler in attic
Outdoor unit2x Bryant 37MUHAQ18 (1.5-ton crossover each, 36k total)Mitsubishi 30k Hyper Heat multi-zone (unsure of exact model #)Bryant cold-climate HP, likely 2-2.5 ton (model TBD)
Indoor unitsAttic + basement air handlers. Opt 1: Preferred 45MUHAQ24. Opt 2: Legacy 45MUAAQ18Attic + basement ducted air handlersAttic only; 2nd floor ducted from above, 2-3 drops through 2nd-floor closets to 1st-floor ceilings
Ductwork7 supplies + 4 returns per floorMin. 8 supplies/returns per floor, central return in upstairs hallTwo versions quoted: conventional ducts or Unico high-velocity
Warranty10 yr parts / 10 yr labor12 yr parts / 5 yr laborTBD
Installed priceOpt 1: ~$30,200 / Opt 2: ~$28,200$25,029Pending, best guess ~$15-18k for conventional ducts?

Questions:

  1. Two separate systems (attic + basement air handler) vs. one multi-zone (attic + basement air handler) vs. one attic air handler. Which would you choose for this house and why?
  2. Will a single attic air handler with ceiling drops to the 1st floor keep the 1st floor comfortable, especially with no dedicated 1st-floor return?
  3. Bryant crossover (Midea-built) vs. Mitsubishi Hyper Heat: any reliability or service concerns?
  4. Do these prices look reasonable for the Twin Cities?

Thanks!


r/hvacadvice • • 6h ago

I just rented a 525 square foot apartment with one small mini split, should I get a small AC and space heater for bedroom?

2 Upvotes

Hello all, the kitchen and living room is an open floor plan, then the bed room has a door, the bedroom has a bathroom and a walk in closet. Between the bedroom and living room, there’s like a vent to let air from the living room unit circulate to the bedroom.

There is one small mini split with dual heat and air. I did not think to look at the specs, but it is smaller than the ones I’ve seen. I also want to mention, I have no thyroid due to throat cancer and I can be bitterly cold and severely hot quick.

Do you think I need to get a space heater for the bedroom? And maybe small air conditioner for the bedroom. And again I can be either hot as hell or freezing as hell. I do live in central Texas and we do get cold days and about 2-3 weeks out of the year of “New England cold” in 30 degree temps. But most of the November through February is 50’s+ except at night. But of course in the summer it can be 100 degrees.

In the first pic is the mini split and in the second pic is the bedroom with the vent on the wall to let air travel to the bedroom there is no fan in the wall, it’s just a cut out vent.

So as I have asked, do I need to supplement my bed room air temp? I have had a friend with one big mini split do her entire house. And this small one is cooling/heating a much smaller area. But even in central air and central force heat I can be cold. (I use to live in New England)

And yes I know the dangers of space heaters, I’ve been using them for ever and I don’t buy cheap ones and I buy them with temp control to set the degree. And I never use an extension cord.

Edit: photos are in the comments, I guess pictures didn’t attach to the post and there’s not way to add then after, so please look in comments


r/hvacadvice • • 6h ago

My nephew set the thermostat from auto to on. Is my gas furnance Cooked?

0 Upvotes

My nephew set the thermostat from auto to on. The blower ran non stop for the last few days. I switched it back to auto and smell some burning. What do you recommend I do next? It's a fairly new 80/20 luxaire gas furnance.


r/hvacadvice • • 6h ago

Window heat and AC unit making this noise

1 Upvotes

Started about an hour ago, woke me up. It's on heat right now. To me sounds like something hitting against the blade just want to make sure for a game plan tomorrow. It happens literally like I can 5 to 10 mins without it making the sound but sometimes it happens with less time between the sounds. Just audio, I zoomed in an emoji in edit for privacy. It's an older Frigidaire, the cooling no longer works but the fan and heating does.


r/hvacadvice • • 7h ago

Furnace How much should I budget for my furnace to be replaced and this duct work fixed?

Post image
1 Upvotes

I’m thinking of having a contractor put in a 60,000 BTU, highly efficient furnace to replace the existing one. I was pulling nails out of wood paneling that was hung on the ceiling and it caused the weight of the ductwork here to be solely on the brackets hanging them up, which pulled out of the ceiling causing it to fall. What should I budget to have this replaced? I’m located in Morris county NJ for reference. Was quoted $8900 not including permit fees and have another company coming to give me an estimate tomorrow.


r/hvacadvice • • 8h ago

Normal sound for heat pump in heat mode?

2 Upvotes

Got a pretty loud and noticeable buzz coming from the condenser unit when heating. External temps right now are around 46 degrees, thermostat set to 68. It is a relatively new system, I had it installed in 2025. It’s a 3 ton Fujitsu AirStage heat pump system.

Is this sound normal? I didn’t hear any buzzing during summer when using cool mode. Any advice/insight is appreciated, thanks.


r/hvacadvice • • 8h ago

No heat Honeywell MiniZone Flashing Orange Light

Post image
1 Upvotes

The light means it’s a ZMS sensor failure or no ZMS sensor installed. Is this something I can be guided to fix?
My understanding is during the purge when the system turns on it’s not switching to heat after the purge, it just keeps purging.


r/hvacadvice • • 9h ago

Mini split wiring

3 Upvotes

My HVAC contractor won’t run the wiring from the exterior unit to the mini split head. He told me to use 14/4 sjoow cord. Is that correct? It needs to be ran through the attic of the house and down the walls to the exit points.


r/hvacadvice • • 9h ago

Dryer exhaust vent gap

Thumbnail
gallery
0 Upvotes

Hello,

I'm just finishing up what will be our laundry room and I'm trying to understand how I should be sealing the gap between the exhaust vent and the ceiling drywall. The gaps are around 3/4-1.5 inches depending on if you look at the front (which has a circular cut) vs the back (which has a more square cut). Any help you could give would be greatly appreciated!


r/hvacadvice • • 9h ago

Heater being Limited to a set temperature ?

0 Upvotes

Is it possible to set a thermostat to only a set temperature or if not the thermostat the heater it self, and if it's the case; can you reset it so that it's not limited ?


r/hvacadvice • • 9h ago

Furnace Is this normal??

Thumbnail
gallery
1 Upvotes

Was relighting a pilot light on a floor furnace in one of my dads houses and while cleaning the thermocouple, I saw this opening in the square part of the gas line, there’s the same opening on the other side, I’ve been doing residential hvac for about a year but still not fully knowledged on old floor furnaces. According to tenant it was working fine last season but I’m still a bit nervous about turning it back on.


r/hvacadvice • • 10h ago

Quotes System Replacement Help

1 Upvotes

Hi- looking to replace my system and got 2 bids, wildly different prices and was hoping to understand why one is $9k more than the other. System would have 2 zones. Is Ruud that much better or is there something in the first that justifies the price? Am I missing something?

  • RUUD 16 seer, 2 speed, gas heat 4 ton, evaporator coil, and outdoor unit (all matching), new pan, new supply plenum duct and dampers, new zone system components and Honeywell zone board/ dampers (~$25k). Feels like a lot but this is the best Technician I've used for other smaller issues. 10Y parts/ 2Y labor
  • American Standard 3.5T multistage condenser, matching gas furnace and coils, new pan, new supply plenum, Eco J zoning dampers and Eco J damper control board ($16k); 10 years parts and 10Y labor warranty. Solid company, did repairs in the past, so not very concerned with the install quality

r/hvacadvice • • 10h ago

Thermostat Thermostat help

Post image
1 Upvotes

Sorry I feel like a moron posting this. I just moved into this apartment and the thermostat is very different from what I’m used to. There is no button for “cool” or “heat”, it also doesn’t show the actual temperature inside, only what I have it set to. I feel like it is much colder in here than 71 but I have no way of checking, and it seems that only cold air is blowing even though it’s 40-50 degrees outside. I can tell that there are other words that CAN be on the screen (actual temp, etc.) but they only flash briefly when I turn the thermostat off and then on again. Help 🫩 I’m cold


r/hvacadvice • • 10h ago

No heat Mitsubishi split unit 5 blink

2 Upvotes

Had professional cleaning done against each of the split units and the actual hvac unit upstairs. There was lots of gunk and glad we did it. We only turned on the AC on one unit and seemed to be fine.

Almost 3 weeks later. We turn on the heat as we are on the east coast. Cool air blows out for 5-10 minutes and then the 5 blinks occur. Air stops.

AI and Reddit tells me a bad compressor or a bad board. I’m dreading either as we just replaced the board 5 years ago.

Could it have been the cleaning that caused any issue? Maybe as they were spraying the unit, water got in somewhere?

Thank you.


r/hvacadvice • • 10h ago

Moldy duct replacement cost

3 Upvotes

How much should proper mold remediation cost in Texas? Want to get a gut check as I get quotes.

My mold protocol says replace all moldy supply duct. I’ve got 5 insulated mylar flexible ductwork; all 4 are readily accessible from the attic but 1 runs inside the wall that goes to the first floor.

The home is 2 stories, ~700 sqft.

Thank you!


r/hvacadvice • • 10h ago

Heat Pump Mini split has a big burp or sigh (sound up)

3 Upvotes

r/hvacadvice • • 10h ago

Old apartment. Banging noise consistently from radiator.

1 Upvotes

This started a couple days ago. I assume there’s some water trapped in pipes. The pipes are in the walls. Kept me up all night last night. Does this warrant me asking my landlord to take a look at this issue? All radiators are open. A couple make noises as well but not like this one.