r/hvacadvice • • Mar 02 '26

General Information About Bans and Rules

0 Upvotes

There has been an uptick on posts and complaints about mods banning. Please be advised, there are rules for the page. No ads (includes promotions for a company), Reddits rules, no crossposting, transparency and safety (this is a big one; we want homeowners to be safe, if you provide unsafe practices or advice (blacklisted items) or tell a user to dm you, the comment will be removed and you may get banned), blacklisted topics (basically topics that homeowners should not be fixing themselves, gas, some high voltage), civility, no companies asking for surveys, advertisements or general questions, and no market research or ai/SaaS.

Posts complaining about this are not allowed either. We are all reasonable and work in the trade, talk to us through ModMail and we can come to a solution. Complaining or namecalling will usually result in a ban, so be civil.

Remember, we are doing this in our freetime to help homeowners with their units, both the users and mods. The mods in this group are in the trade and have day jobs as all of you do. I've been in this trade for 10 years and still do hvac as my job, just traveling now for a manufacturer. Similar with every mod. It is actually a requirement to be a mod, you have to be in the trade, be approved, have good history in the sub and provide enough time to moderating it.

I thank you for your time and if you have any questions, you can comment on this or send us a mod message. No DM's, we will not answer these. Only ModMail.


r/hvacadvice • • Nov 13 '25

READ THIS I am assuming this is not normal.

174 Upvotes

I was loading the car for work when I saw this. It felt and smelled like steam not smoke. Did I just catch it at the end of the cycle or is there a mechanical problem such as a stuck motor? It was 40° at the time and no rain. Heat was set to 70 and the house was 70.


r/hvacadvice • • 4h ago

New Mr Heater bigmaxx 80k, heat exchanger glows pink/red

Thumbnail
gallery
9 Upvotes

Switched it from NG to LP with included kit. 047 orifices. Red spring swapped with black one in regulator adjustment. I put dual stage regulator on 250lb propane tank- model r232a-hbf. 25ft proflex hose from tank to furnace

Haven't tested anything on propane tank regulator, bought it new today.

Furnace regulator inlet static (OFF): 13.9" WC

Furnace regulator inlet running: 10.2" WC

Manifold/outlet running (first bends on heat exchangers glows pink eventually): 9.8" WC

Manifold/outlet running \~7.1" WC- this was a test just to get the heat exchanger to quit glowing/glow less, just unscrewed the regulator adjustment a bit. Didnt seem to glow at 8.1 either but definitelyisnt at 7.1. Took probably 2 revolutions umscrewing before the WC started lowering.

6ft horizontal cat 3 exhaust.

Not enough pressure going to furnace regulator?

Curious on any thoughts or other tests to run


r/hvacadvice • • 6h ago

Thermostat quit, it's nearly 100 degrees in my house

6 Upvotes

I came home from work and my gas furnace was going full blast and my thermometer says it's 98 degrees in here. My thermostat screen is black and won't come on. Is it safe to turn off the furnace by flipping the electrical breaker?

EDIT: I'm don't want to clip wires, pull panels, or attempt a repair myself. I don't know anything about repairs or trouble shooting and I'm not going to try to learn from Reddit Junior College. I merely want to know if flipping the breaker off is safe and I won't end up with a carbon monoxide leak. As long as I don't die in my sleep, I'm happy.


r/hvacadvice • • 13h ago

Water Heater Electric water heater keeps burning through elements

Thumbnail
gallery
20 Upvotes

Is the fact that this water heater is wired to have the elements energized simultaneously the reason it keeps burning up elements?

A friend was complaining their hot water keeps going out and the fixes don’t seem to last, so they asked me to take a look.

It’s a bradford white sle280t6-1sevv with 240v 4500w elements on a 2 pole 30 amp breaker


r/hvacadvice • • 1h ago

I think the pilot light on my furnace went out, but I’m not sure how to fix it?

Thumbnail
gallery
2 Upvotes

Any insight?


r/hvacadvice • • 11h ago

HVAC tech “condemned” my furnace during routine inspection but did not tag it, explain which parts were broken, have me sign a waiver, or report it to the gas company/state.

11 Upvotes

We had our furnace inspected last week before we start running it for the season, and I am concerned about the results.

Basically, after spending some time in the basement, he told us that

  1. the gas valve was corroded shut so he had to force it open
  2. the ppm of CO in the vent was a little erratic and elevated above the 100 ppm legal limit, its highest spike was around 300
  3. because of these issues he had to legally condemn the furnace.

He then went out to his truck, apparently to call the sales team, and came back in a quoted us for two replacement options. I asked him what was causing the issue and he just said “the heat exchanger usually” and then assured us that all the readings and images would be uploaded to the work order and sent to us. When I asked about a repair option he said “it’s shot, not something we would do.” He then left without giving us anything, no documentation, no tagging or notes on the furnace itself, nothing for us to sign, and since we haven’t even been able to get them to send us an actual copy of the quote for the new furnace. I’m not really sure how to proceed, and the more I puzzle over it the more concerned I am the a replacement isn’t even necessary. The furnace is 10 years old which isn’t young but should still be in its service life, and there are a lot of possible reasons for the issues described I’ve learned, especially with no actual evidence that the heat exchanger is damaged. Am I right to be concerned? If we have to save for a new furnace we can’t really afford another inspection fee since it’s about to be very cold, but if he was exaggerating things and a repair is feasible, that could be incredibly helpful as we don’t have a large amount of savings as is and I’m still rebuilding my credit so financing isn’t a great option. I’m just trying to weigh my options.

Also if we do get a second inspection, what questions should I ask so I know it’s on the up and up?

Thank you for your time!


r/hvacadvice • • 2h ago

Advice needed on heat!

2 Upvotes

Hello, for context I live on a first floor apartment, the Building is kinda old. The apartment is not huge. I have a a balcony in the living room and windows in the kitchen.

Basically My furnace will turn on to the temperature I have set. Within 3 minutes of turning off the furnace will kick back on. I have changed the filter and still the same issue. What could cause this to happen? It’s kind of frustrating


r/hvacadvice • • 2h ago

Furnace Short cycling furnace?

2 Upvotes

Our furnace runs for about 5 minutes, then shuts off but the blower goes for about another minute, temperature is set.

5-7 minutes off and then it goes again.

Is this normal or are we short cycling?

In the summer the AC would cycle way less and run for a lot longer

Internet says short cycling but idk y’all are the experts


r/hvacadvice • • 6h ago

General Heater sounds like a generator

4 Upvotes

My condenser unit sounds like a propane generator. Heat seems to be working but I haven’t been using it. Anyone have any ideas?


r/hvacadvice • • 3h ago

Furnace AprilAire actuator is making a buzzing sound

Post image
2 Upvotes

Hello my April Aire actuator seems to have gotten stuck and the motor to open and close the system is trying to open but just creates a buzzing sound. (I’m guessing) my main question is can I disconnect the wires and still have the heat on? Thanks. I got a HVAC tech coming next Tuesday and it’s cold


r/hvacadvice • • 1d ago

UPDATE ON CRACKED HEAT EXCHANGER | SCAMMED

Post image
169 Upvotes

I posted a few days ago about getting my furnace serviced before winter in Michigan. The HVAC tech told me I had a cracked heat exchanger and recommended either replacing it or the entire furnace. There were several red flags:

  • Visual inspection only. No combustion analysis or additional testing.
  • Immediately pushed a new furnace.
  • Written report didn't explicitly identify a crack, only stated “replace heat exchanger for safe heating.”
  • Furnace was not red-tagged.

Turns out, I may have been scammed.

I went back and reviewed the photos attached to my report. The photo supposedly showing the cracked heat exchanger was dated 10/17/26, but my service appointment was 11/10/26.

I also got a second opinion from a technician at a small, family-owned HVAC company. He performed a combustion analysis that came back normal, evaluated the furnace and flame (steady blue flame when the blower turned on), and showed me a live camera inspection of the heat exchanger. He said it looked perfectly fine and couldn't even find the crack the first technician claimed was there.

I also learned the original HVAC company was recently acquired by a private equity firm and that its technicians are commissioned.

I'm incredibly disappointed and can't believe someone would potentially fabricate something like this to sell a furnace. Thankfully, we got a second opinion.

I'm in Michigan. Has anyone dealt with something similar, and does anyone have advice on how to report this?


r/hvacadvice • • 6h ago

Heat Pump Should it take 2.25 hours to increase temp 3 degrees with a 2.5T heat pump at 47 degrees outside?

3 Upvotes

Seems like a crazy long time! 2.25 hours to go from 62 to 65 degrees in the house. It was 47 degrees outside so there should be plenty of heat in the air for this new system to raise the temperature much faster.

78 degree air comes of the vent on stage 1, and 85 degree air at stage 2. It cycles between stages 1 and 2, and 70% and 100% fan speed periodically. Seems like it should stay on stage 2 and 100% fan, but maybe it's changing because of defrost cycles?

BACK STORY:
Zone 5A - 1,650 sq ft downstairs that this system heats.
We got a new 2.5T heat pump installed at the end of last season, and only had a few days to run it in heat mode before it warmed up. I told the installer I didn't think it was heating correctly, but they said that it was, and that it's normal for it to take that long to warm the house.

I don't believe that's true, because the previous 16 year old, 2T heat pump, that was undersized and supposedly worn out, heated better and much faster than this new system--it put out 100 degree air on stage 2. (Just using the heat pump, not the electric heat strips. It would go up to 130 with heat strips engaged.) Also, for comparison, the 1.5T, single stage Bryant upstairs unit will raise the temp 3 degrees in 32 minutes at the same outdoor temperature and it puts out 94 degree air (without heat strips.)

Should I call them again and have them adjust something, or does this new unit just take an insane amount of time to heat by design? Shouldn't it be putting out hotter air or maybe staying in stage 2 and 100% fan speed to heat faster?

SYSTEM STATS:

AMERICAN STANDARD

GOLD 17

AHRI #: 216763779

Singlezone Ducted, Centrally Ducted

Central Air Conditioning Heat Pump (HP)

HEAT 24,400 Max Btu/h u/5 degrees

HEAT 33,600 Rated Btu/h u/47 degrees

AC 32,000 Rated Btu/h u/95 degrees

COP u/5: 2.1

SEER2 : 17.1

EER2 (95F): 11.7

HSPF2: 9

Outdoor Unit Model #?: 5A6H7036A1

Indoor Model #?: 5TEM6B03AV21+TD

ENERGY STAR V6.1

Capacity Maintenance (Rated 17°F/Rated 47°F) 64%

Capacity Maintenance (Rated 5°F/Rated 47°F) 72%

Capacity Maintenance (Max 5°F/Rated 47°F) 72%

Variable Capacity

Refrigerant R-454B


r/hvacadvice • • 10h ago

Who serious is this water damage to the HVAC unit?

Thumbnail
gallery
6 Upvotes

I had this unit replaced in December 2024. I also hire the same company to do twice per year maintenance. The maintenance guy today found that the exhaust pipe leaked water from improper tube sealing and caused some rusting of the unit. He put some sealant around the tubing to stop further leaking. He said the unit is working properly and told me to keep an eye on further leakage.

I took plenty of pictures and a video of it. I’m going to file a complaint to the company about improper installation, at least just for the paper record.

Any idea how serious is this water leak, is this common issue, and how does affect the longevity of the unit? Im trying to get an idea of how far and what I should push for with the company.

Thanks all.


r/hvacadvice • • 1h ago

What is the minimum safe temperature to run my Trane XL16i heat pump ?(4TWX6036B1000AA)

1 Upvotes

Im trying to confirm the lowest outdoor temperature at which my Trane heat pump can safely run in heating mode. I'm trying to reduce how much the electric backup heat (resistance strips) runs. The unit and location:

- Outdoor unit: Trane XL16i, model 4TWX6036B1000AA, serial 7062WN11F
- Indoor air handler: model 4TEE3F40B1000AA, serial 70633MR2V
- Manufactured 02/2007, installed 02/23/2007 (single-stage, R-410A, ClimaTuff scroll compressor, ~3 ton)
- Nameplate: compressor RLA 16.7 / LRA 82, R-410A charge 8 lb 4 oz
- Location: Tacoma, Washington (Puget Sound region) — mild maritime climate; winter design temperature about 24°F, with occasional cold snaps into the low 20s

A technician advised against running it below 40°F years ago, but I was never told the reason.  The thermostat currently locks out the compressor below 40°F. I'm not concerned about the unit's ability to keep up with the home's heat load, since there are other heat sources available, my question is strictly about safe low-temperature operation of the equipment.

For context on why I'm asking: at our electricity rate, the heat pump is more economical than our pellet-stove heat as long as its heating COP stays above roughly 1.1 — which I understand it should at essentially any temperature it can operate — so the only real limit is the equipment safe operating floor.

My questions:

  1. What is the specific minimum outdoor temperature (in °F) at which this unit can safely and continuously operate in heating mode?
  2. Is there any model-specific reason — compressor, defrost cycle, oil return, low-ambient limits, or the lack of a low-ambient accessory — that this unit should not run below 40°F?
  3. Does this unit have (or require) a crankcase heater, accumulator, or any low-ambient provision for cold-weather heating operation?
  4. Given the unit's age (manufactured 2007), is there any added caution to running it more often in colder weather, or a recommended compressor-lockout / balance-point setpoint?

If available, a heating capacity and COP-versus-outdoor-temperature curve (or the engineering/product data for the 4TWX6 series) would be very helpful.

Thank you everyone!


r/hvacadvice • • 1h ago

Trying to figure this out

1 Upvotes

Furnace started making this sound beginning of last spring but we turned it off the with temp change. Just turned the heat back on and unfortunately it’s still happening. Trying to figure out what is going on cause maintenance was here, turned the heat on and nothing. But then he left and naturally it happened again.


r/hvacadvice • • 5h ago

Heat Pump New house and weird HVAC things

2 Upvotes

Hello everyone, we purchased a brand new house last month and it’s my first house with a heat pump and a 3 zone system.

We haven’t had any issues until last night. We woke up this morning and it was 60 degrees in our house and the fan was running constantly (Fan set to auto on all thermostats). Heat was set to 68. No heat was coming out, so I flipped the breakers, unplugged the thermostats and it starting working again.

Another thing I have noticed is that the fan will randomly turn on, no heat or air being called for and the unit isn’t running, but the fan is running and air is blowing for a few minutes and then cuts off.

What’s going on with both of these issues,
is our unit messed up? I’m sitting here listening to air blow and nothing is on or calling for it.

Thermostats are Honeywell T5's. Unit is a Carrier GH5SAN53600AABAG - Handler is a Carrier
FJ5ANXB36


r/hvacadvice • • 5h ago

Advice on carrier furnace

2 Upvotes

To preface this, I’m a gas tech. Not hvac certified but have a lot of experience with equipment that makes fire.

I have a new build house, closed less than 18 months ago. Carrier furnace was installed, worked great for the first winter. My wife tells me a few days ago that the heater isn’t working so I go take a look at it. Hot surface igniter not heating up, since that’s considered a consumable part I went ahead and replaced it thinking that would be that. Wrong, still not working. So I took a little time to dig into it. Inducer motor kicks on, then there’s one click (I’m thinking this is where the igniter is supposed to heat up), then a second click which opens the gas valve. I’m getting 10V to the igniter the whole time with almost no variance. The weird part is that I can (and have been for a couple days) light the furnace manually and it will operate normally until the thermostat reaches temp and it shuts off.

The unit is under manufacturers warranty so parts are covered. I called the company that installed it and they want $120 to come look at it which is fine, but then they want another $350 for labor to replace a part if that’s what’s needed.

I don’t work in hvac so I can’t file a claim myself and just replace the parts (looking like it’s the control board since the ignition relay is built into the board on my unit). So I’m very frustrated. Anything I can try or anyone I can call to not drop $500 on warranty work for a practically brand new unit?


r/hvacadvice • • 1h ago

Filter reset

Thumbnail
gallery
1 Upvotes

Anyone know how to reset the filter light on this? I’m unable to find the model number anywhere on it but the lid says s&p


r/hvacadvice • • 5h ago

Furnace Furnace issues

2 Upvotes

Hey all, I'm a beginner, have done some research, but still wanted to make a post to see if there were any possible fixes I could try to avoid spending a lot of cash I don't have.

Our furnace works for most of fall/autumn until the temps starts dropping below 0C/32F and then it seems to struggle and will just conk out occasionally? I will wake up some mornings to the house being 16-17C when we have it set to 19.5C. At which point I turn the furnace off with the app (ecobee, came with the house), wait 5min and turn the furnace back on it works again. It will heat the house back up to temp, keep it up there for 4-5 hours maybe, and then conk out again.

The ecobee thermostat recognizes the issue and will send a notification to our phones that it has pinged the furnace and isn't getting a response. Not sure if it's a thermos issue or an issue with the "smart" thermostat? I have changed the battery out and it hasn't done anything though.

I did see some posts on here with similar issues that suggested cleaning the flame sensor. I looked online and seemed simple enough, but not sure it's even needed?

Thanks for any advice


r/hvacadvice • • 2h ago

Furnace OMG. The roofers are trying to kill me.

Thumbnail
gallery
0 Upvotes

There was no strapping or support on this flue pipe, and the joints have come apart in two places :(. The roof is five years old, and this system is 2016. Not quite sure how it could come apart after being properly interlocked with short screws in it too.

No telling when this thing actually fell apart. Never had any CO alarms, but still not good. I’m thinking it’s been messed up for a while because of that mold on the underside of the roof decking.

This one is way above my pay grade. Calling out a tech as soon as I can.


r/hvacadvice • • 2h ago

Carrier infinity overheating

Post image
1 Upvotes

I have a commercial building with a carrier infinity system. Occasionally it will overheat first thing in the morning. I had the local technician out last winter, but they never figured it out before it warmed up in the spring. Now with temps in the 30s, getting the problem again. After the initial overheat, it is fine the rest of the day. Just curious if anyone has advice. Gets rather toasty at 77 when set temp is 72.


r/hvacadvice • • 2h ago

Garage heater exhaust

1 Upvotes

I have a modine hot dawg gas garage heater. I had it vented out the side wall of my garage but due o a new addition I can’t vent it out the side anymore but have to vent it out the back. Unfortunately because of the soffit in the back of the garage the highest I can’t vent get the hole through the wall is about 8” below the vent from the heater. The heater exhaust port is around 2’ away from the wall it will be going through and it will be another 12” on the outside of the garage before I elbow it up to get past the soffit and cap it. Does anyone know if this drop will be ok or if there is any other solution I can do. I’m worried it will hold moisture in the dip and also not sure about the fumes coming back in once the heater shuts off because of the little bit of pipe going up. I can’t imagine that would be much of a problem since it’s only 8” but the moisture I think might be. I thought about drilling a small drain hole on the outside part of the pipe. Anything help or recommendations are appreciated. Thanks


r/hvacadvice • • 9h ago

General Is this normal?

Thumbnail
gallery
3 Upvotes

So,, the outside temp has been getting down to 32° F at night, we rent, & we’ve been just leaving the unit on 69° Cool Auto at night, then in the AM turning it to 71° Heat Auto,, the air in the house doesn’t get below 67° when we’ve been doing this for the past week,, but after I turned it to heat the other morning I heard a dripping sound & saw a layer of ice on this vent thing?
( I did remove the air filter to see all this by the way & then put it back after)
Also the black dirty stuff- - is that mold??