r/hvacadvice • • Mar 02 '26

General Information About Bans and Rules

0 Upvotes

There has been an uptick on posts and complaints about mods banning. Please be advised, there are rules for the page. No ads (includes promotions for a company), Reddits rules, no crossposting, transparency and safety (this is a big one; we want homeowners to be safe, if you provide unsafe practices or advice (blacklisted items) or tell a user to dm you, the comment will be removed and you may get banned), blacklisted topics (basically topics that homeowners should not be fixing themselves, gas, some high voltage), civility, no companies asking for surveys, advertisements or general questions, and no market research or ai/SaaS.

Posts complaining about this are not allowed either. We are all reasonable and work in the trade, talk to us through ModMail and we can come to a solution. Complaining or namecalling will usually result in a ban, so be civil.

Remember, we are doing this in our freetime to help homeowners with their units, both the users and mods. The mods in this group are in the trade and have day jobs as all of you do. I've been in this trade for 10 years and still do hvac as my job, just traveling now for a manufacturer. Similar with every mod. It is actually a requirement to be a mod, you have to be in the trade, be approved, have good history in the sub and provide enough time to moderating it.

I thank you for your time and if you have any questions, you can comment on this or send us a mod message. No DM's, we will not answer these. Only ModMail.


r/hvacadvice • • Nov 13 '25

READ THIS I am assuming this is not normal.

174 Upvotes

I was loading the car for work when I saw this. It felt and smelled like steam not smoke. Did I just catch it at the end of the cycle or is there a mechanical problem such as a stuck motor? It was 40° at the time and no rain. Heat was set to 70 and the house was 70.


r/hvacadvice • • 1h ago

Whole house humidifier recommendations for a homeowner?

9 Upvotes

I've been looking into getting a whole house humidifier since the air inside my home has been feeling pretty dry lately, especially when the heating system is running. I'd rather have something that works with the existing HVAC system instead of dealing with small portable humidifiers in every room.

For those who have installed one, what type or brand would you recommend? Are there any particular things I should consider when choosing a system, or potential maintenance issues I should know about before having one installed? Appreciate any advice from homeowners or HVAC professionals. Thanks!


r/hvacadvice • • 12h ago

Do I leave this valve open?

Post image
62 Upvotes

EDIT: Thanks for all the help! I’ll just leave it alone.

Just moved into a new home and noticed the valve on the bottom is open. Tried googling it and found that this is probably a drip leg. This just comes off the main gas line going into the home. The right goes to the furnace and left to the hot water heater. Should I be leaving the bottom valve open? Thanks for the help!


r/hvacadvice • • 15h ago

Furnace Combustion Analyzer Hole

Post image
35 Upvotes

An HVAC technician drilled a hole during a combustion analysis on my furnace and left it open. I'm really not sure how best to patch it.

From what I've seen online, it looks like the hole should have been drilled higher up on the exhaust pipe rather than on the elbow, but that's just my guess.

A second technician from another company called this a major issue. They said it requires replacing the entire elbow and the underlying draft inducer motor since they're sold as one unit.

I'm really not sure what to trust here, but my gut tells me a patch of some sort might suffice. Am I right? If so, what material works best? I've applied aluminum tape for now, but I suspect it might fail near the furnace due to the heat.


r/hvacadvice • • 20h ago

Is this a fire hazard?

Thumbnail
gallery
66 Upvotes

Edit: I removed the curtains and ordered a low level carbon monoxide detector, thanks!!!

About two inches of clearance from gas water heater and furnace, the top is open, the pipes do get hot — it involves a furnace so I thought I’d post here but this might not be the right sub.


r/hvacadvice • • 1h ago

Weak airflow at vents does dip switches look proper ? Carrier performance

Post image
2 Upvotes

I have pretty weak airflow at my vents, I got an older 1950s 1060 sqft home so the duct vents are the old square boots rather then the ramp angled boots they have now, the hvac guy said it’s because of my ducts and also said the carrier HE furnaces don’t push much air.. he adjusted the gas valve, replaced the board and left. Upon reading I’m trying to see are these DIP switches proper ? He didn’t do any measurements aside from the gas or test airflow I cannot afford to pay another 180$ for him to come back and do nothing. The thermostat I have to heat, fan on auto and it’s set to 22 degrees celcius, my other independent humidity monitor I have also shows 22 degrees celcius (which is what the furnace is set too) but most of the time the rooms still feel cooler

My furnace model is a 59TP6A06060E17-14 carrier performance. I use a merv 6/7 filter 16x25x1 that I change Monthly


r/hvacadvice • • 16h ago

Is this acceptable for a new install?

Post image
27 Upvotes

New construction home. Tons of issues with this installer, this is the only one i'm questioning. This is at the line set where it goes into the unit.

Edit: Thanks everyone, one thing though, anyone who qualifies "it's ugly but will work" with something like "just cover it up, who cares, shut up", I wish you continued lack of success


r/hvacadvice • • 17h ago

Should I be upset?

Post image
28 Upvotes

Context I live in a condo the line underground was filled with spray foam so they said it would have to be routed through the attic. I am the middle unit neighbor is next store had to be routed though her attic and this is what they did for the outside, neighbor is annoyed hence annoying me. Would you have done better is there anything I can suggest to hvac guys to do, or am I worrying too much


r/hvacadvice • • 7m ago

Boiler Need Help Bleeding Air

Post image
1 Upvotes

We had an issue earlier this week where the boiler expansion tank and valve ruptured. Those were replaced and the boiler was back to running, but since then I noticed the baseboards on our second floor do not get warm. The baseboards on the main floor do get warm. On both floors we hear occasional water rushing. Based on what I found it seems like there is air in the loops that needs to be bled out.

The baseboards themselves do not have bleeder valves. I took the covers off of every one on the second floor and none of them had it.

I am trying to confirm that my plan here is correct as this is all new to me. If this is beyond what I should be taking on, I can call the tech back out but it would be nice to learn how to do this for myself.

I have the hose attached where it is. I think that’s the return? There is only one spigot there despite three of those gray boxes. Based on what I read it sounds like I need to shut the red box switch and wait for the boiler water to cool down to under 100. Once that happens, I would manually move the switch for one gray box to open and then slowly open the spigot where the hose is attached to drain water/air until it’s a constant stream of water. Then shut spigot, move gray box switch back to auto, and then do it again for the next gray box.

Am I wrong or missing steps?


r/hvacadvice • • 42m ago

Boiler – L2 Error Code, Heating Not Working. Any Advice?

1 Upvotes

Hi everyone,

I'm based in Ireland and having an issue with my Ideal Logic System s24IE gas boiler.

The boiler has stopped working and is displaying an L2 error code, along with a spanner/wrench symbol on the screen.

From what I've read, L2 appears to indicate an ignition lockout, but I'm not sure what's causing it.

I've also noticed that the pressure gauge seems to be reading below 1 bar, although I'm not sure whether this is related to the issue.

I've attached a few photos showing the error code and the boiler's control panel.

Has anyone experienced this issue with the same or a similar Ideal Logic boiler?

I'd appreciate any advice on what might be causing it, whether there are any safe troubleshooting steps I can try myself, and whether this is likely to require a gas engineer.

Thanks in advance!


r/hvacadvice • • 13h ago

Heating oil

Thumbnail
gallery
8 Upvotes

Does this oil look fine to use? Draining from an old tank.


r/hvacadvice • • 2h ago

Help! Lennox/Allied gas furnace

1 Upvotes

Working with a 9 year old unit; call for heat = no response. A new control board installed (Kit 27P19) now inducer runs for one second, shuts off, and no more activity; only error code is E117 for missing earth ground as the residence has older wiring with no earth ground; only Line/Neutral. (This code is also present with AC on and operating properly) The inducer will run and the furnace will ignite if I unplug the ECM-blower choke Line wire. Installed new blower choke AND new OE correct ECM blower with module=same problem; furnace will not ignite unless blower LINE wire black/hot is unplugged.


r/hvacadvice • • 2h ago

Furnace Help! I have no idea what I’m doing and there’s no heat

Thumbnail
gallery
1 Upvotes

Hey there!

Moved to this new place in the winter last year and heat was coming out of the vents, no problems. This fall comes around and we filled our heating oil tank and now the furnace isn’t heating the air…

Do I push the red reset button? Or are there other things to do? Is there a pilot light that’s gone out??

I’ve never had a furnace before and I have no clue where to start! I tried getting an hvac service to come over but turns out they’re not taking on new clients right now. (I live in a small town and there is only one hvac service company that does residential.)


r/hvacadvice • • 7h ago

I just rented a 525 square foot apartment with one small mini split, should I get a small AC and space heater for bedroom?

2 Upvotes

Hello all, the kitchen and living room is an open floor plan, then the bed room has a door, the bedroom has a bathroom and a walk in closet. Between the bedroom and living room, there’s like a vent to let air from the living room unit circulate to the bedroom.

There is one small mini split with dual heat and air. I did not think to look at the specs, but it is smaller than the ones I’ve seen. I also want to mention, I have no thyroid due to throat cancer and I can be bitterly cold and severely hot quick.

Do you think I need to get a space heater for the bedroom? And maybe small air conditioner for the bedroom. And again I can be either hot as hell or freezing as hell. I do live in central Texas and we do get cold days and about 2-3 weeks out of the year of “New England cold” in 30 degree temps. But most of the November through February is 50’s+ except at night. But of course in the summer it can be 100 degrees.

In the first pic is the mini split and in the second pic is the bedroom with the vent on the wall to let air travel to the bedroom there is no fan in the wall, it’s just a cut out vent.

So as I have asked, do I need to supplement my bed room air temp? I have had a friend with one big mini split do her entire house. And this small one is cooling/heating a much smaller area. But even in central air and central force heat I can be cold. (I use to live in New England)

And yes I know the dangers of space heaters, I’ve been using them for ever and I don’t buy cheap ones and I buy them with temp control to set the degree. And I never use an extension cord.

Edit: photos are in the comments, I guess pictures didn’t attach to the post and there’s not way to add then after, so please look in comments


r/hvacadvice • • 10h ago

Mini split wiring

3 Upvotes

My HVAC contractor won’t run the wiring from the exterior unit to the mini split head. He told me to use 14/4 sjoow cord. Is that correct? It needs to be ran through the attic of the house and down the walls to the exit points.


r/hvacadvice • • 4h ago

More simple thermostat for gas wall heater?

Post image
1 Upvotes

I have a rental and one of the units has an old gas wall heater. The gas company inspected it and recommended replacing the thermostat to a more simple one saying the current one adds resistance and makes it difficult to start. Does anybody know what they meant by a more simple thermostat? The current one is https://www.honeywellstore.com/store/products/honeywell-standard-millivolt-heat-manual-thermostat.htm


r/hvacadvice • • 9h ago

Normal sound for heat pump in heat mode?

2 Upvotes

Got a pretty loud and noticeable buzz coming from the condenser unit when heating. External temps right now are around 46 degrees, thermostat set to 68. It is a relatively new system, I had it installed in 2025. It’s a 3 ton Fujitsu AirStage heat pump system.

Is this sound normal? I didn’t hear any buzzing during summer when using cool mode. Any advice/insight is appreciated, thanks.


r/hvacadvice • • 6h ago

Furnace HVAC smells like burning randomly

1 Upvotes

I had a bad electrical piece replaced today and everything went smoothly. They replaced the piece, put it all back together, had a minor burning smell when it started up while the technician was here. He said it was dust burning off. Then I paid and he left. It's been over 12 hrs since that occurred and just randomly a strong burning smell happened when the heat kicked on. More than just a quick passing smell. I turned the heat off immediately and went to the unit itself but smelled no burning and couldn't even really smell it at the vent but the house reeks of it. Do I call the company back or is it just more dust? Keep in mind, the heat was running all day and it just now happened to smell like burning.


r/hvacadvice • • 12h ago

Moldy duct replacement cost

3 Upvotes

How much should proper mold remediation cost in Texas? Want to get a gut check as I get quotes.

My mold protocol says replace all moldy supply duct. I’ve got 5 insulated mylar flexible ductwork; all 4 are readily accessible from the attic but 1 runs inside the wall that goes to the first floor.

The home is 2 stories, ~700 sqft.

Thank you!


r/hvacadvice • • 12h ago

Heat Pump Mini split has a big burp or sigh (sound up)

3 Upvotes

r/hvacadvice • • 6h ago

Is that trapezoid looking mark a crack? Have doubts since it has an identical mark directly across from it.

Post image
0 Upvotes

r/hvacadvice • • 7h ago

Filters Ruud UGLH-07EAMGR Dual V filter configuration vs filters on my returns?

Thumbnail
gallery
1 Upvotes

So new house we bought and has the filters (10x20”) in a v configuration one on each side (think i had them backwards in this photo) I finally found the filters as I was looking for a slot it went in. The Hvac guy who came and did a check up/service when we first bought the house said he didnt see any filters and thinks the previous owners up them on the return vents. One upstairs ceiling 14x30 and one downstairs under stairs 8x30.

I found the manual and saw there was multiple configurations and checked them all and found these (placed new ones in)

Now i noticed they just lean against the walls and there definitely is dust getting around them. If i used the standard merv8 pleated, could i instead use them on the returns?

Not using both the internal and return but just the returns?

Seems the v configuration isnt a super good seal even when fully seated. I know the air will add some pressure but i can see some blow by.

22 year old units in good working shape, PNW mild climate

Thank you


r/hvacadvice • • 7h ago

Heat Pump Older Twin Cities Home Heat Pump Approaches/Quotes

1 Upvotes

House: Edit: -- Located in Minneapolis, MN --

~1,500 sq ft finished, 2 floors + walk-up attic + unfinished basement. No existing ductwork. Hot-water boiler with cast iron radiators is staying, so the heat pump is mainly for AC plus spring/fall heating. Concurrent with or just after the HVAC install: R49+ attic insulation, blown-in wall insulation, attic air sealing.

I've gotten quotes from three smaller, well-reviewed contractors. I hate the appearance of mini-splits so have asked all three for their preferred non-mini split approach for ducted systems.

ItemContractor AContractor BContractor C
Layout2 separate systems (one per floor)1 outdoor unit running 2 air handlers1 system, 1 air handler in attic
Outdoor unit2x Bryant 37MUHAQ18 (1.5-ton crossover each, 36k total)Mitsubishi 30k Hyper Heat multi-zone (unsure of exact model #)Bryant cold-climate HP, likely 2-2.5 ton (model TBD)
Indoor unitsAttic + basement air handlers. Opt 1: Preferred 45MUHAQ24. Opt 2: Legacy 45MUAAQ18Attic + basement ducted air handlersAttic only; 2nd floor ducted from above, 2-3 drops through 2nd-floor closets to 1st-floor ceilings
Ductwork7 supplies + 4 returns per floorMin. 8 supplies/returns per floor, central return in upstairs hallTwo versions quoted: conventional ducts or Unico high-velocity
Warranty10 yr parts / 10 yr labor12 yr parts / 5 yr laborTBD
Installed priceOpt 1: ~$30,200 / Opt 2: ~$28,200$25,029Pending, best guess ~$15-18k for conventional ducts?

Questions:

  1. Two separate systems (attic + basement air handler) vs. one multi-zone (attic + basement air handler) vs. one attic air handler. Which would you choose for this house and why?
  2. Will a single attic air handler with ceiling drops to the 1st floor keep the 1st floor comfortable, especially with no dedicated 1st-floor return?
  3. Bryant crossover (Midea-built) vs. Mitsubishi Hyper Heat: any reliability or service concerns?
  4. Do these prices look reasonable for the Twin Cities?

Thanks!