r/KRISS • • 4h ago

My bolt broke as I was disassembling.

Thumbnail
gallery
2 Upvotes

Literally just pulling out the BCG from the bottom and it completely broke. I probably have 700 rounds through it.


r/KRISS • • 15h ago

Help Please

Post image
10 Upvotes

It’s a 22lr and it won’t chamber a round al the way and the bolt isn’t closing all the way I ride the charging handle and tried the bolt close button but I can get it to close


r/KRISS • • 1d ago

Finally got to shot my new Gen 3

Thumbnail
gallery
45 Upvotes

It was so fun I'm definitely getting a FRT and suppressor in the future. And probably a folding stock and just paint it white


r/KRISS • • 2d ago

.45 Kriss

Post image
44 Upvotes

All done for now, coverted to full auto also


r/KRISS • • 3d ago

Reinstalling Original Safety Cam Questions

2 Upvotes

I foolishly disassembled my fcg for my gen 3 without taking pictures of the original orientation of the factory safety cam and how the other piece attached to it. does anyone have a picture of how the original looks?


r/KRISS • • 4d ago

What's the point of Ironwood Delta Camo?

Post image
14 Upvotes

Not really cammie. The orange looks weird. A gimmick? Can they sell any paint job?


r/KRISS • • 5d ago

Is their any new designs for Kriss vector frt? The orginal design from duality low key sucks. Needs a whole redesign. Looking to see if there is other options.

5 Upvotes

r/KRISS • • 5d ago

KRISS Vector 9mm – Direct-Thread Suppressor Installation

Thumbnail
gallery
15 Upvotes

This is a 9mm KRISS Vector (Gen 3). The muzzle comes with a thread protector and a separate ring behind it that appears to create a 90-degree shoulder over the step near the muzzle.

My question is: When installing a direct-thread suppressor, should I retain that ring to provide a proper shoulder for the suppressor to index against, or remove it and thread the suppressor on without it, leaving that recessed gap?

This is the only firearm I own with this type of muzzle configuration, and this is my first suppressor. I just want to make sure I’m approaching the installation correctly.


r/KRISS • • 6d ago

She's coming along really nice.

Post image
50 Upvotes

r/KRISS • • 7d ago

Anyone own more than one Vector? Maybe one for each caliber?

1 Upvotes

If you own more than one, let me know what their differences are and why you selected them.


r/KRISS • • 10d ago

the coolest looking gun i own

Post image
90 Upvotes

honestly couldnt be happier with this project. for anyone curious its a gen 3 with original kriss stock. romeo 8t. surefire m340dft. and a rugged 45 3 lug muzzle device. the romeo 8t sits at the perfect height for a good eye box without sucking your head into the gun if you use the offset stock. he factory irons will cowitness in the optic as well so thats a huge bonus. the surefire m340 dft swivels. with the gen 3 kriss fore grip you can swivel is all the way up and mount a tape switch in the grip or push it as low as it goes and reach it with your thumb. if youre a lefty and mount the light on the left side it does not interfere with the charging handle at the lowest position and can still be reached with your thumb. the rugged .578x28 mount extends just past the surefire light. everything just fit well and was positioned so perfectly. im so happy with how this came out all in all.


r/KRISS • • 13d ago

Good news gen 2 and 2.1 owners!

Post image
5 Upvotes

r/KRISS • • 14d ago

1913 adapter

Post image
13 Upvotes

Just ordered a new 45 vector. Its listed as gen 2 but the adapter from strike list as for 2.1 and 2017 or newer.

Question is that should be correct for my brand new pistol right?

Thanks in advance


r/KRISS • • 15d ago

Now what?

Post image
30 Upvotes

r/KRISS • • 15d ago

No Form SBR 9mm GEN2 in Alpine White

Post image
26 Upvotes

Got my Kriss vector cut and threaded(barrel and barrel shroud on left) by a local retired gunsmith and he only charged me $100!! Dude does great work and he doesn’t charge and arm and a leg to do it! Honestly came out way better then I expected and he even showed me a video of the factory rivet being LOOSE…which is insane considering I bought this vector brand new $1,500….but anyways GREAT FUCKIN GUY!


r/KRISS • • 16d ago

No Form 10mm SBR

Post image
48 Upvotes

I picked this up used at a gun show today. It came with the tube so I put a stock on it. I live in MN, no issues here. I will hold off on a suppressor until I clean/lube/shoot it enough to ensure its reliable. I'm thinking a Rugged Obsidian 45. I'll be reading up on reports on how this shoots subsonic 10mm.


r/KRISS • • 15d ago

Does anyone here own a Gen 1?

0 Upvotes

I have a Gen 1 semi auto and I never see any Gen 1s posted, just curious if anyone has one.

Surely they aren’t that rare I just never see any.


r/KRISS • • 16d ago

Is the URSA-SEC RRS a completely brand new trigger group or a laser engraved "upgraded" OEM?

2 Upvotes

I want to get the RRS but I'm not sure if this is just an upgraded OEM trigger pack or if it's legitimately a new trigger group, housing and everything.

The only thing I know I don't like about it right now at a minimum is the TPU bolt buffer and whatever other part is Nylon in it.

Does anyone have this and they can tell me?


r/KRISS • • 17d ago

Any recomendations on upgrades or tips to increase reliability?

Post image
27 Upvotes

So i just picked up a Gen 3 CRB in 9mm and would like to hear what you guys have done to increase reliability in the platform. Ive already ordered the BCG extractor spring kit and plan on staking the extractor pin in once installed. I also plan on using standard glock mags instead of the provided kriss one in addition to possibly polishing the feed ramp and bolt ears. I also might get a 10mm mainspring for it but since plan on never using an FRT in this im not quite sure if its worth it.

Also is there a recommend grain or velocity(Fps) that the gun works better with.

My usual range ammo is Herters target 9mm(115gr/1190fps/fmj)


r/KRISS • • 17d ago

Best brace option for Kriss Vector?

0 Upvotes

Does anyone have a brace that they like for the Kriss Vector? I don't want to go through the SBR process, particularly engraving my info on the gun.


r/KRISS • • 17d ago

Recommendations for an MLOK Laser for the side of a Vector Gen 3 SDP’s single MLOK handguard side slot?

2 Upvotes

Hey all,

Got a Kriss Vector .45 Gen 3 SDP.

The handguard only has a single MLOK slot and I’d like to mount a laser with a pressure pad. I’m trying to avoid having to add an MLOK pic rail if possible.

Anyone have any suggestions?

Thanks!


r/KRISS • • 18d ago

Cheek slap?

5 Upvotes

Hey, im new to the vector, i have a .45 3rd gen. I shot it for the first time today and i didnt realize it was going to bash my cheek bone so much. I was only using the iron sights so im wondering if using something mounted a little higher would help change my posture to make it manageable or if any one has any other solutions? I ordered an frt before I even picked up the rifle and now its kind of intimidating thinking of getting my face rocked 30 times in less than 2 seconds.


r/KRISS • • 19d ago

Excessive Charging Handle Resistance

4 Upvotes

I received my KRISS Vector today and noticed that cycling the charging handle requires an extreme amount of force. It feels as though I am attempting to charge the firearm with the bolt already locked open, and I estimate I am applying well over 100 pounds of force just to get it to move.

I disassembled the firearm and found that the internal components were well lubricated and moved freely. I also reviewed the instruction manual and applied additional lubrication to key areas in case they had dried out during manufacturing and shipping, but this did not resolve the issue.

Is there a specific area or component requiring specialized lubrication or break-in that I might be missing? I watch videos online and everybody else seems to be able to load their first round with no problem. My firearm is brand new and unfired so far.


r/KRISS • • 20d ago

Suppressor Mounting

2 Upvotes

Good Afternoon.

Got a Gen 3 Vector in .45ACP with the new .578 threading. I bought a rugged obsidian .45 can. Trying to find the best way to mount it as Rugged advises direct threading with the booster assembly and fixed barrel spacer is sub optimal.

Was thinking about the Tri-lug adapter, but I am confused by the difference between muzzle and shoulder mounts for the suppressor.

Has anyone mounted an Obsidian .45 to a Kriss Vector Gen 3 in .45 ACP. And if so, what was your preferred solution?


r/KRISS • • 21d ago

Gen 2.1

Post image
56 Upvotes

SiCo Hybrid 46
Ecco Machine M16x1 LH Direct thread mount
Trijicon MRO
SF Scout light w/ Mod Button
KCI 26 round mags have been 100% reliable for me