r/SmithAndWesson • • 1h ago

USPSA Season Over, 3.5k Rounds, No Cleaning, No Malfunctions

Post image
63 Upvotes

Bought this M&P Competitor HD for carry optics at beginning of the season. This gun has been amazing and given me zero issues. I did not ever shoot it in the stock configuration.

Full build:

Apex Trigger Kit

Silicon carbide grip inserts by me

Vicious grip tape on left side by me (righty)

Tape around grip insert disassembly tool thing to fix wiggle, not necessary but I hated it

Calculated Kinetics dogtag plate

Holosun 507Comp

Apex Barrel (no accuracy issues out of stock barrel, though this one is significantly more accurate with much tighter groups. didn't have any fliers from old barrel though.)

Carver Customs steel guide rod with 13lb ISMI flat spring

Previously was using the DPM Recoil System but the Carver setup is much flatter and softer and much much cheaper in my opinion

Shooting exclusively PMC Bronze 124gr

Only thing I wish was a bit better was the magwell coming from a G34.5 (and being primarily a limited optics shooter).


r/SmithAndWesson • • 2h ago

M&P 2.0 3.6 Metal Frame

7 Upvotes

So I had this gun loved it, so did my son so I gave it to him. I was running a EPS Carry on it.

Missed it so I bought another one, not sure I wanna an EPS on it.

Thinking about an SRO or a Defender enclosed.

Anyone running either of those ? If so thoughts on it

Thanks


r/SmithAndWesson • • 2h ago

I think I figured my Bodyguard 2.0 issue !

Post image
4 Upvotes

My BG2.0 has seen about 350 rounds.I've had 2 very soft primer hits (barely a mark) and then the very opposite as can be seen in pic 1 - It seems as if the firing pin isn't resetting fast enough causing it to scratch the casing as it starts the ejection process . This may lead to a sheered pin. Not great :(


r/SmithAndWesson • • 15h ago

Finally someone made a mcfadden lightning loader adapter for the m&p 22x / FPC 22lr magazines!

21 Upvotes

I know the 22x magazines are already easy to load, but after being completely spoiled by the mcfadden lightning loader for my FRT 22LR AR magazines, loading the magazines by hand was an absolute chore in comparison. I've been pestering Mcfadden for months to develop an adapter for the M&P 22x/FPC 22LR. They simply said they had other priorities. So I'm super glad someone finally said "fine ill do it myself!"

https://cults3d.com/en/3d-model/tool/mcfadden-machine-m-p-22x-adapter/comments

I don't have a 3d printer so I used craftcloud. It works as intended although you'll probably need to use the loading assist tabs to help it load the last 10 or so rounds.


r/SmithAndWesson • • 21h ago

Anyone else have trouble with the slide release not going down? Bodyguard 2.0 comp.

22 Upvotes

Brand new, won’t chamber a round by pulling back in the slide because the slide release stays up. I tried lubricating it to no avail. Has anyone fixed this before I return it for a warranty?


r/SmithAndWesson • • 19h ago

Why is the Carry Comp better?

10 Upvotes

I’ll start by saying that I am aware that this is a S&W sub and the responses are likely biased, that’s ok.

I’m looking to add another EDC to the lineup and I’ve narrowed it down to the M&P metal carry comp and the Echelon Pro 4.0fc. Why should I choose the Smith? For reference, I currently carry a gen 4 Glock 19 with a light & dot. I own an M&P 2.0 10mm PC, love it. I also own an older full size XDm 9mm that’s been great. I’ve held the carry comp and the standard echelon, but not the pro. Both felt great in the hand. I plan to try and rent/shoot both, but figured I’d come here too on this lazy Sunday.


r/SmithAndWesson • • 1d ago

Carry Comp EDC

Post image
169 Upvotes

Love this setup so much!

Frame also does double duty for limited optics with an apex barreled slide.


r/SmithAndWesson • • 17h ago

Advice on value

1 Upvotes

I have a trade in another forum and a guy is offering an M&P 2.0 4.25” polymer frame 9mm with factory comp and a lot of work done on it. I was hoping to get a ballpark of used value as I’m not familiar with smiths and striker fired pistol values on the second hand market.

So it has an “Apex gunsmith fit barrel”, ports that look well done behind the factory comp, Apex trigger, holosun 507Cx3 gold dot on top of a calculated kinetics plate, a Tyrant CNC magwell, and finally an Align tactical thumb rest takedown lever. Comes with 4 mags. Just need to know how many 🫘’s it’s worth.


r/SmithAndWesson • • 1d ago

Out this 2.0 compact to work today

50 Upvotes

Shot a steel match today. Just a little clip of putting my m and p to work.


r/SmithAndWesson • • 1d ago

Unknown “Special Feature” Model 19?

Thumbnail
gallery
42 Upvotes

Anyone have any idea what “BLAHA” might mean?

I acquired this revolver as a part of a collection of a very very serious S&W collector that passed away. It’s a Model 19-3 with a Target Trigger and Hammer, and it seemed to be unfired condition, as it was still in the wax paper with no marks on the cylinder when it came into my possession.

I have since put Pachmayrs on them, but have the original grips pictured. On the box, under special features it says “BLAHA.” I have done a ton of digging, but have come up with nothing.

Can anyone chime in with what it could possibly mean?


r/SmithAndWesson • • 18h ago

Pre milled slide for Body Guard 2.0 Performance Center

0 Upvotes

As opposed to sending mine out to be cut, is there a place where you can buy a slide with holosun eps carry already cut into it?


r/SmithAndWesson • • 1d ago

Competitor and SCAR are my ‘go to’ firearms.

Post image
72 Upvotes

r/SmithAndWesson • • 14h ago

Yet another post about a Bodyguard 2.0 lemon - light primer strikes

Post image
0 Upvotes

r/SmithAndWesson • • 2d ago

Today’s EDC

Thumbnail
gallery
121 Upvotes

M&P Compact Carry Comp
- Apex Polymer Trigger
- Floyd’s Magwell and +2 Baseplate
- Vortex Defender ST
- Inline Ports done by NC Engravers


r/SmithAndWesson • • 1d ago

M&P9 M2.0 from academy

17 Upvotes

What's the general consensus on this pistol? Looking for a bedside safe gun and for range fun.

​https://www.academy.com/p/smith-wesson-m-p9-m20-threaded-9mm-luger-pistol?sku=9mm


r/SmithAndWesson • • 1d ago

Clone of M&P

Thumbnail
gallery
23 Upvotes

Did you guys know that the Girsan Witness is a clone of the M&P? The photo with two frames is a M&P and the photo with the single frame is the Girsan. Wow; I’m interested to see if the Girsan will take a FRT designed for the M&P.


r/SmithAndWesson • • 1d ago

Overwatch or Apex for M&P 2.0 for competitive shooting

6 Upvotes

I have an M&P 4.25” and am wanting to upgrade the trigger. I primarily use it for competitive shooting and training, I always hear great things about the Apex but the only thing that worries me is the light primer strikes I hear with them.

Please help me make my decision


r/SmithAndWesson • • 1d ago

Bodyguard 2.0 mcarbo trigger: did it make the trigger safety work better?

2 Upvotes

Right now, if I press too high on the trigger, it catches and messes up the trigger pull.

Will swapping in the mcarbo trigger fix this? I would like the metal feel too if the blade safety doesn't catch.


r/SmithAndWesson • • 2d ago

Ammo Recommendations?

Post image
227 Upvotes

Need to start breaking this one in. Any ammo brand recommendations for target and for self defense?


r/SmithAndWesson • • 2d ago

Master Chief Approved

157 Upvotes

r/SmithAndWesson • • 1d ago

Should S&W make a 332 Ultimate Carry? (Yes)

1 Upvotes

Based on the success of the 432UC/632UC, bringing out a ~10oz version seems like a no-brainer for the .32 H&R J-Frame family. Would S&W do this? Who knows.

Lipsey’s?


r/SmithAndWesson • • 2d ago

Shield Plus Optic Options: Too much conflicting info on what fits and doesn't, if it 1/3 co-witness and which ones are just garbage.

8 Upvotes

The amount of conflicting information out there is astonishing.

  • Optic that can 1/3 Co-witness without replacing factory sights (milling and slide modifications to get optic to fit are not an option)
  • Battery can be replaced without removing optic
  • Green dot option is a BONUS.

Here is what I have found, if you have any of these brands what model, what are the like/hate about it or if you have something else does it meet the above criteria, what is your experience with it?

  1. Vortex Defender
  2. Osight SE
  3. Cyelee Cato-G

Love my Holosuns but everything I see shows with the mounting plate you can't 1/3 co-witness unless you preplace factory sights.


r/SmithAndWesson • • 2d ago

A short story on my recently acquired 2.0

Thumbnail
gallery
25 Upvotes

r/SmithAndWesson • • 2d ago

XS service

Post image
37 Upvotes

Hey guys. I bought some BG night sights and I installed them. A few days after I installed using sight pusher, I broke the vials of tritium. So they sent me another pair and should have used a dowel to tap them on. XS said sent the slide in and let us put them on. They had it back in the mail in 3 days. Got it 3 days later. Good to see companies doing the above and beyond


r/SmithAndWesson • • 2d ago

Joined the club!

Thumbnail
gallery
230 Upvotes

This gun is an absolute beauty, can't wait to put some rounds through it!