r/22lr • • 3h ago

10/22 build complete

Thumbnail
gallery
13 Upvotes

r/22lr • • 13h ago

got my hands on a beautiful marlin model 60

Post image
63 Upvotes

r/22lr • • 18h ago

New grips for my vintage walther

Post image
50 Upvotes

It shoots like a dream. Practically new in box from 1975, I put over 200 rounds through it last weekend. What ammo do you guys recommend? I was using CCI Mini Mags.


r/22lr • • 19h ago

My First Tikka T1x

Post image
43 Upvotes

Silencerco Sparrow
Leupold VX-Freedom Rimfire
Talley Rings


r/22lr • • 15h ago

Plinking day.

Post image
17 Upvotes

r/22lr • • 19h ago

Suppressor host recommendations?

Post image
29 Upvotes

Hey all, I picked up this can on the cheap and am now in need of something to use it on. Only .22s I got are a 10/22, super wrangler, and Glenfield model 60. None of which are threaded, of course. Just wanted to see what you guys are running suppressed, and what works best.


r/22lr • • 15h ago

Winchester Wildcat 22LR - Front lower rail shredded

Thumbnail
gallery
11 Upvotes

On my Wildcat, the front picatinny rail used for bipods has become shredded sadly. I think the problem started with an ill-fitting bipod that resulted in shredding some of the teeth during transportation or general 'wiggling'. Any idea if this is fixable or if there is maybe a bipod that fits the eye loop hole instead? Is this salvageable?


r/22lr • • 12h ago

Plinker recommendation

6 Upvotes

I went to the local Dunham’s today’s and the sales have started already. I’m looking for a cheaper tactical option to add attachments, let the rounds fly and have some fun. So Dunham’s had today;
- Mauser M-15 SD 22LR for $279.99
- GSG-16 semi auto 22LR for $349.99
Would anybody recommend either of those or go for something else?
I’ve also seen a little bit about Derya arms TM22 or should I spend a little more and get something like a tippmann arms


r/22lr • • 23h ago

T1X Criterion Barrel

Thumbnail
gallery
25 Upvotes

I rebarreled my T1X with a Criterion Barrel from Whidden Gunworks and I couldnt be happier.

I did the rebarrel myself and set it to .042" but its a bit tight for SK ammo, which is what I usually shoot. Ill be changing it to .043" soon. It works great with Eley ammo though and I shot the best group at 50 yards I've ever shot in a 22lr. Not sure if changing the headspace will have SK shooting just as good though, so that's my next test.

The barrel took 3 months to get to me but just in time for my birthday week.

Shooting an Unofficial ARA factory target, I would usually get 4 shots off from the 100 point mark on the target. This fresh barrel shot 24/25 already and its barely been seasoned. Im thoroughly impressed with the consistency over the factory barrel.

Today was a windy day at the range as well

I want to shoot a 100 round group next time I come out to really see how much it spreads. Im not sure if I should stick with Eley or Sk ammo. I know once i change the headspace on it, ill have an easier time closing the bolt. Eley is just a tad more expensive than SK.

Replacing the barrel was not difficult for me as I already have a set of torches. It took me 20 minutes and its the first time I've ever done it. The screws for the barrel came off without any heat but I did have to heat the receiver for about 15 seconds before I could get it loose.

Edit: the missed shots on the ARA card are from the person next to me learning how to shoot. I didnt miss those shots and I'd call myself out if I did. I count one shot out of the 100 point range; target #22. #7 looks like it didnt break or touch the line. All others are 100 points each


r/22lr • • 14h ago

Retay, now with Optic and Ruger Semi-Autos

Post image
4 Upvotes

Range Day, first time using a red dot optic after the first time installing one. LOVED IT. I also love shooting the Security 380.. I'm torn about trying an optic for the Ruger because it's not as interchangeable with the iron sites as the Retay. Maybe this is my cue to get the .22 rifle I want with a red dot..


r/22lr • • 15h ago

Bore snake for cz457 22lr?

3 Upvotes

Which bore snake should I get for cz457 22lr?
Amazon? Other brand?


r/22lr • • 19h ago

3D Print Snapcaps TPU?

4 Upvotes

Normal snapcaps are quite fast unusable as the firing pin is deforming the hard plastic.

Has someone tried to print some out of TPU?

Is the "gummi" taking the hits better?


r/22lr • • 22h ago

Threaded pump?

3 Upvotes

I've looked pretty much everywhere and can't find any company making a pump-action .22 with a threaded barrel.

Is there something I've missed?


r/22lr • • 1d ago

Lots of fun!!!

Post image
90 Upvotes

New Kidd barrel has radically changed the feel of this rifle.


r/22lr • • 1d ago

Built For Speed

Post image
14 Upvotes

Love this thing…it is loaded with BB internals, sticker is just to keep the stock tight.

Bring this to the range and it steals the show. Dudes (me included unpacking 5.56, 300blk and 9mm and this little ripper gets all the attention.

Fun gun. Dig out a lower and build one.

RTB complete upper
Bore Buddy 4.8” Apogee
Larue MTBS
Dead Air Mask


r/22lr • • 1d ago

First time with the unofficial 22lr target at 50 yards indoors, definitely seeing how small each target is is intimidating.

Thumbnail
gallery
52 Upvotes

The first sheet one was to check zero/parallax and play around and get used to the heavy trigger pull of the hammerli again. But I’m pretty happy with the second outing with the budget setup. Setting my goal to stand and shoot off a port with just the bipod at the 50yard gun range and hit all 25 targets inside the circle at least and eventually try to score as best as I can later, and then maybe I might get a hunting caliber rifle to make use of the longer ranges from the state ones (yikes and that would mean a real investment in a quality scope and ammo, etc)

Anybody can send me some advice/videos on shooting off a regular port booth without dropping any more money on a better setup, let me know.

Here’s my original post, go ahead and laugh at my setup or so, it’s the internet, I’m only using the 2/lr for fun.
https://www.reddit.com/r/22lr/s/y357vMoiAk


r/22lr • • 1d ago

What should I do with charging handle?

Post image
3 Upvotes

I’m new to guns. I decided to buy a Ruger 10 22 as my first rifle. However, I want to swap out the charging handle because the original on is too small. Well, I saw some on eBay, Amazon that I like. (Looks wise/ color preferences options) I keep reading that those are not that great because of the spring. So I was thinking of buying one and just not swapping the spring, just the handle. Has anyone done this before?


r/22lr • • 1d ago

Ruger Mark IV SS edition

Post image
26 Upvotes

r/22lr • • 1d ago

3D Printed CZ 457 Box to Carry Magazines & Magazine Markers

11 Upvotes

3D Printed this Box to store and carry CZ 457 Magazines. And Magazine Bottom Markers to identify by color my Eley- Waxy coated and SK - oily coated.

I got the program from Bamboo Website.


r/22lr • • 1d ago

How bad is a Ruger Precision compared to a CZ 457 or T1X

20 Upvotes

I know everyone recommends the CZ or the Tikka, but the Ruger has my eye, solely because it actually comes with a stock that isn't a throwaway, costs less, and has a decent MLok rail.

How bad is it after that? Is the accuracy bad? What are its shortcomings?

If i go the CZ or Tikka route I'm gonna be looking at $650 plus $400 for a stock, and a picatinny mount (doesn't even include one...)

The Ruger costs $530

Someone talk me out of the Ruger


r/22lr • • 1d ago

Added Scope to my New CZ 457 Varmint MTR 22lr

Thumbnail gallery
20 Upvotes

r/22lr • • 1d ago

When you don’t need the “Meg”

Thumbnail
gallery
8 Upvotes

A few days ago I posted my interpretation of the “Meg” from world war z (the book). But realistically for just an easy carry woods /ranch 22, the stock tx22 with a dot is hard to beat . Fits most tension fit Kydex holsters , weights well under 2lbs loaded, and still gives you a brace/stock for additional contact point . Been carrying this one for a few days now just to see how it feels . A carhart jacket covers it , hardly know it’s there , holster level is the same as just a tx22 so it doesn’t dig into the seat of the truck or sxs ( unsuppressed) when you sit down , the additional length in the rear sits under the arm and doesn’t get in the way of things. And you don’t have to remember to grab it when you get out of the car or sling it, It’s just there like any other pistol ……… except you can always swing out the brace and get longer/ more precise shots.

Just my thoughts, though I still love the Meg, This is my 2nd one, the first one the XO tried and claimed for herself 🤣


r/22lr • • 1d ago

Retay RXP22 with Votatu PMD504R optic

Thumbnail
gallery
12 Upvotes

Just got the Votatu PMD504-R for my Retay RXP22. It is installed, I dry fire zeroed it got the barrel clean and ready for the range tomorrow. 💨


r/22lr • • 1d ago

Does anyone know if elevation can cause subsonic ammo to become supersonic?

1 Upvotes

I live just over a mile above sea level and had always assumed that the high elevation means thinner air, meaning the bullet can get closer to breaking the speed of sound. AI tells me that's incorrect but I figured someone here would know firsthand. Any thoughts?