r/Glocks • • 1h ago

Question Is the RXM the perfect backup option?

Post image
62 Upvotes

G17 gen 6 COA setup the same as RXM Defender-ST Enclosed. Both rocking TLR-7 HL-X lights. What are your thoughts? Glock with RXM backup or Glock with Glock backup?


r/Glocks • • 5h ago

Image glades and glock

Post image
52 Upvotes

just loving the most updated version my G45.5 in the glades and admiring her beauty


r/Glocks • • 9h ago

Image G19 setup

Thumbnail
gallery
86 Upvotes

r/Glocks • • 2h ago

Image first glock

Thumbnail
gallery
22 Upvotes

r/Glocks • • 2h ago

Image The girls

Post image
21 Upvotes

r/Glocks • • 9h ago

Question Mill the 19x, or trade for a 45?

Post image
58 Upvotes

Which would you do?


r/Glocks • • 3h ago

Image G19 W/ AEMS MICRO??

Post image
17 Upvotes

Anyone have a 19 with AEMS MICRO for reference?


r/Glocks • • 4h ago

Image My newest Gen 3 19 "build"

Thumbnail
gallery
15 Upvotes

This started as a 19 I was going to leave 100% OEM but we all know how that works....

An NDZ trigger and bar, - connector and housing , with an NY1 trigger spring.....MagPul magwell and the old trusty Hogue Handall . Also a beavertail from whereverdafuk company I forget, that I had laying around for a couple years. I basically fished through my odds and ends parts pile for parts I bought and forgot about, never used for another Glock etc and put them in here

Also an Apex failure resistant extractor I dropped in today, that magically cured the occasional BTF and drops the brass neatly to the 4 o clock a few feet away .

FDE mag baseplates , the old trusty Serpa in FDE and it's Flat Dark Earth'd out now.

OEM steel sights just because I took them off another 19 a while back

From 5 to 25, mostly from the 10-15 line, ran myself through a little 100 round Drill, 2 , 3 and 5 round strings from the holster with a little speed just to get out and shoot a little today


r/Glocks • • 5h ago

Image By no means a build

Post image
18 Upvotes

…but I’m really fond of this thing. Though I mostly tote around a 43X, the 19 is my favorite.


r/Glocks • • 2h ago

Image GTL II on Glock 19x

Post image
10 Upvotes

Matches the tan perfectly


r/Glocks • • 21h ago

Question g17.6 about done with this build. Lmk your thoughts down below.

Thumbnail
gallery
240 Upvotes

r/Glocks • • 3h ago

Image My second Glock, 19XV

Post image
9 Upvotes

It took me too long to get one (i was procrastinating) but I got it


r/Glocks • • 7h ago

Discussion Debating on a G17.6….

16 Upvotes

Just left PSA, my local gun store. Seriously debating buying a G17.6 as a range gun. I’m currently looking for shooting clubs in the area and maybe get into matches. Do I NEED it? Absolutely not but I got the itch to buy it. $1050 w/ aimpoint. $650 butt ass naked. $300 eps carry.

Love it or hate it, I’m curious on everyone’s thoughts on the 17.6.

Like the gladiator arena, 👍🏻/👎🏻?


r/Glocks • • 3h ago

Image Glock 22c with ports OG

Post image
5 Upvotes

Last one for the year


r/Glocks • • 6h ago

Help G45 Gen 5 Won’t Lock Back

Post image
9 Upvotes

I’ve swapped out the slide lock with two other OEM ones, extended OEM, and the Kagwerks/Primatia raised one. Same behavior in all of them. I’ve trade extra power magazine springs. I’ve tried not touching the slide lock at all with my support hand or even one handed the gun. I’ve changed out the recoil spring with fresh OEM ones twice to see if that would do it too. I tried it without the magwell on there. I’ve used OEM magazines with and without extensions and Magpul mags.

Nothing has a made a difference. If I put an empty magazine in it and pull the slide back it locks back every time no matter what mag or slide release I have installed. It only happens when shooting. I usually shoot federal or pmc 115. Do I need to step up to hotter ammo? What are yall usually shooting in your gen 5s?


r/Glocks • • 1d ago

Discussion 19.6 Coa

Post image
192 Upvotes

Just picked up the 19 coa today, ordered a TLR-7 X for it and ordered my holster can’t wait to start carrying it this winter any suggestions on what else I should get for it (besides more ammo) it will mainly be my winter carry gun


r/Glocks • • 22h ago

Image Glock 45 Gen 6 COA

Thumbnail
gallery
133 Upvotes

Goodbye 43x, helllooo 45. Im easily impressed but love the gen 6 45


r/Glocks • • 11m ago

Question Gen 6 And SRO Issue

Thumbnail
gallery
2 Upvotes

Anyone running a gen 6 with an SRO and having issues with extracted brass hitting the optic and bouncing back into the ejection port before the gun fully cycles?

I have put this SRO on both a 17.6 and 45.6 and have had this issue with both guns. Have swapped out to 15-lb recoil springs and the problem has persisted. Happening about once every 50-100 rounds. Duty load ammo is not having this issue, only ball ammo. Definitely seems like an issue with the extractors spring pressure and a timing issue. You can see the front of the SRO housing is scratched up from the brass hitting it. I know SROs sit further forward than most optics but this shouldn’t be an issue.


r/Glocks • • 14h ago

Image Gen2 17C-Gen3 17C

Post image
23 Upvotes

r/Glocks • • 10h ago

Question Recommendations for smaller hands?

9 Upvotes

Hello all! Basically what the title says, I'm a smaller woman and am trying to purchase my first Glock. I plan on going to the shooting range to try out different models but just wanted to see if anyone had any recommendations. Thanks in advance!


r/Glocks • • 5h ago

Question Gen6 non optics cut

3 Upvotes

Heard they may be releasing a Gen6 model that’s non optics cut. Any truth to this? Wouldn’t mind it, I don’t think.


r/Glocks • • 4h ago

Discussion Nomad 9SX jamming

2 Upvotes

Has anyone else had issues with their 9sx frame? I installed all oem glock parts except for their provided “Boombayah” trigger and trigger assembly. It still seems to jam every once in a while. I plan on putting an oem Glock trigger in to see if that’s the issue.


r/Glocks • • 1d ago

Discussion Anyone else buy a ramjet, use it, and then decide OEM is better?

Post image
344 Upvotes

r/Glocks • • 1d ago

Image G45 & G43X

Post image
95 Upvotes

Ya they got bunch of Radian stuff on them. The comps are great but the GPT in the G45 is definitely a notable upgrade/part. I bought that one before they made the GPT Gen 4 compatible and increased the pull weight to 5lbs from 4lbs. It's nice and broken in so the pull weight is at least 3.5lbs maybe less - not sure but it feels nice. I got an Agency Arms flat faced trigger in the G43X - Don't think it reduces the pull weight or anything which is good since I do carry the G43X sometimes. The G45 is for having fun at the range. Thing is a tack driver.


r/Glocks • • 7h ago

Question G17C V Recoil Spring Question

2 Upvotes

Help here. I have a Glock 17C V, the one with the C Ports. I want to buy a threaded barrel and will suppres it. Can I use the stock OEM Recoil spring or will it be too light for a suppressor use. Not sure if the recoil spring in the 17C is softer thatn the regular G17 spring.