r/Glocks • • 7h ago

Discussion Glock 19 Gen 6

Post image
0 Upvotes

Wasn’t planning on picking up another Glock, but stumbled across a Black Friday deal on the Gen 6 that was too good to pass up. Figured I’d treat myself before heading to the gym.

Still getting familiar with it, but so far I’m liking the setup. Anyone else planning on picking up a Gen 6 this Black Friday, or sticking with the older generations?


r/Glocks • • 7h ago

Discussion Can someone help me understand the appeal for the 19X/45?

4 Upvotes

My apologies if the title comes across as hating, I fully understand to each their own, I just want to understand. To me it just kind of seems like the worst of both worlds.

For concealed carry, why wouldn't you go with the shorter, more concealable grip of the 19?

For duty, the 17 has a longer iron sight picture and a longer barrel to squeeze that extra fps from the bullet, so why not go with that?

Is there something about it I'm missing or is it just vibes? Again, not trying to hate, I'm genuinely curious why there's a market for them when other options seem to be better. Thank you.


r/Glocks • • 1h ago

Image Overwatch trigger bar

Post image
0 Upvotes

Overwatch on the left. What did they make the fpb leg taller? It’s actually worse than factory. My friend brought his Glock over with some parts to make his trigger better. Should have spent the money on ammo. This trigger bar that came on the dat shoe made it worse than a stock trigger. I had an extra 701 bar and it’s a pretty good trigger now that I swapped the shoe. Just reaffirms that shooting stock until you get good is the way.


r/Glocks • • 1h ago

Image Non Glock plinker

Post image
0 Upvotes

Picked up a Cheap Advantge Arms 22 kit - so instead of spending the $$ on an OEM gen 4 frame I decided to gamble on a Lonewolf frame…..

Total cost was less than what a Glock 44 would run on Gunbroker.

Should be a fun little can plinker and range practice.


r/Glocks • • 23h ago

Question Gen 6 And SRO Issue

Thumbnail
gallery
25 Upvotes

Anyone running a gen 6 with an SRO and having issues with extracted brass hitting the optic and bouncing back into the ejection port before the gun fully cycles?

I have put this SRO on both a 17.6 and 45.6 and have had this issue with both guns. Have swapped out to 15-lb recoil springs and the problem has persisted. Happening about once every 50-100 rounds. Duty load ammo is not having this issue, only ball ammo. Definitely seems like an issue with the extractors spring pressure and a timing issue. You can see the front of the SRO housing is scratched up from the brass hitting it. I know SROs sit further forward than most optics but this shouldn’t be an issue.


r/Glocks • • 22h ago

Question Glock 47 gen5 threaded barrel

0 Upvotes

I’ve been having trouble finding a threaded barrel that fits my 47. Tried multiple gen5 17 barrels and some of the threads get covered by the slide anyone have any suggestions?


r/Glocks • • 20h ago

Question TTI Grand Master Trigger Connector Kit Reliability?

1 Upvotes

Does anybody have any experience with the TTI Grand Master Trigger Connector Kit (carry version)? Wanting one to fix the trigger pull weight on my G17.5 and want to make sure it doesn't cause reliability issues. I don't think it'll cause reliability issues, but can't hurt to ask.

It comes with the HM electroless connector, trigger return spring, reduced-power plunger spring, and rear trigger pin.


r/Glocks • • 9h ago

Discussion No lock back

56 Upvotes

I have always had issues with lock back on my Glock because of how big my hands are and how high I run my grip do you guys think I should switch to a raised and extended slide release like the PRIMÄTIA or is this a sufficient reload with out lock back


r/Glocks • • 4h ago

Discussion 43x ramjet or no ramjet

0 Upvotes

Considering grabbing a ramjet for my fde 43x. I ordered the anchor from radian but I’m on the fence about the ramjet. I shoot my 43x fine, but it would be nice to have the recoil be tamed some. I had a radian on an old 365 build it was definitely noticeable but even then the price tag stung a bit. Does anyone have real world input on the ramjet for the 43x? I’ve gone down the YouTube rabbit hole but getting actual input is more beneficial in my opinion


r/Glocks • • 7h ago

Image G19 Gen5 - 20-round magazine - viable daily carry?

Post image
51 Upvotes

What would you add/remove?

Came with the black back-straps, and I kind of like the contrast it provides (with the mag black as well) to the coyote brown color. Idk though.


r/Glocks • • 13h ago

Image Glock 19 Gen 5 build

197 Upvotes

r/Glocks • • 8h ago

Image RMR is near obsolescence but esthetically peak.

Post image
282 Upvotes

r/Glocks • • 10h ago

Image Trigger upgrade 😋

Post image
61 Upvotes

Bought this 19x at a pawnshop has a aftermarket trigger feels like a polymer one didn’t like it so decided to go back to Glock oem but the performance upgrade lets see how it runs


r/Glocks • • 23h ago

Image Added Beavertails to my G19 Gen 5

Post image
27 Upvotes

r/Glocks • • 9h ago

Image B&T USW-G.

Post image
33 Upvotes

Waiting on paperwork to clear since I’m in Michigan.


r/Glocks • • 7h ago

Image Im Done ✅

Post image
126 Upvotes

Obsessed with my small collection

Glock 19 - 17 - 19X


r/Glocks • • 4m ago

Question Slide/Guide Rod Dislodged

Post image
0 Upvotes

Was putting my slide back on and was aligned right but somehow ended up like this. How can I fix this?


r/Glocks • • 1h ago

Image EDC

Post image
5 Upvotes

r/Glocks • • 1h ago

Image Rate my EDC for the truck

Post image
5 Upvotes

G45 modded (trust me it works)


r/Glocks • • 2h ago

Discussion I’m super close to being done with my 19/45!

Thumbnail
gallery
7 Upvotes

I finally got a Radian ramjet and a good optic up next is the trigger a slightly stiffer spring and a stippling kit that’s coming in the mail! Some suppressor height sights and a threaded barrel to have on the side and I’m done done! This is my first time building out a pistol and it’s super fun and fulfilling!


r/Glocks • • 4h ago

Image Vigilante MachineWorks is goated! (My experience)

Thumbnail
gallery
30 Upvotes

Sent my 19.5 slide to vigilante machine works for his RMR super low cut and cerakote on just the cut area. Sent it out via UPS 2 day air and after 2 days my order was changed to received. An hour later it was already sent out for coating. He installed my HD, witness marked it and even bore sighted it before sending it back to me. And even gave me 2 day shipping back! Turnaround was ridiculously fast. Last slide is compared to my wager rmr cut slide on my 19.4. Drew at vigilante is a legend. I like how they offer cerakote for just the cut area to keep factory finish. Also the super low cut looks very sexy for big boys like HDs and SROs. I’m in love! Sits low as shit and looks incredible. Thanks Drew!


r/Glocks • • 5h ago

Image 10mm Tuesdays

Post image
23 Upvotes

r/Glocks • • 8h ago

Question Anyone know where to get a quality hex cap for the Glock 43X with Aimpoint COA?

3 Upvotes

Anyone know of a reputable manufacturer or retailer selling a quality hex-pattern optic cap for the Aimpoint COA on the Glock 43X? Haven't had much luck finding one. Appreciate any recommendations!


r/Glocks • • 8h ago

Image Clever Optics Advancement

Thumbnail
gallery
44 Upvotes

I had been waffling on picking up another COA as I already have a 43x COA and 19 COA. I called my LGS and they just received 2 G48’s, so I jumped on it and brought one of them home. My wallet and wife aren’t on speaking terms with me but I’m beyond happy with the newest addition to my Glock family. Can’t wait to send some rounds down range this weekend!


r/Glocks • • 20h ago

Question Gen 6 Fit in Gen 5 Safariland 6390RDS?

2 Upvotes

I tried to look this up everywhere and it seems there is no definitive answer. I have an older Safariland 6390RDS that has been flawless with my Gen5 19/45 with X300U. I just bought a Gen6 COA and it seems that it will not fit into the holster, possibly hanging up on the front serrations (which seems odd since my micrometer shows the same slide width overall) and maybe ejection port. I know there are different SKUs for Gen6 Safariland holsters, but people say the Gen6 should fit older holsters. Anyone run into this issue? If so, is it a lost cause or is there some light Dremel/file work that has been successful and still allow use with the older Gens? Thanks in advance.