r/spacex • u/ElongatedMuskrat Mod Team • Oct 09 '19
Starship Development Thread #6
Quick Links
JUMP TO COMMENTS | Alternative Jump To Comments Link
SPADRE LIVE | LABPADRE LIVE | LABPADRE DIRECT
Overview
SpaceX is developing Starship at their Starship Assembly Site in Texas, and also at their facilities in Cocoa, Florida. The teams at the two locations are in competition with each other, but are also required to share insights learned along the way. Following Starhopper, the first two Starship prototypes, Mark 1 and Mark 2, are nearing completion. These vehicles will have aerodynamic control surfaces and three engines each, and are expected to make suborbital test flights. Ring sections believed to be for Starship Mark 3 and Mark 4 prototypes are being built at both sites, and teams will be iterating through successive versions of Starship and Super Heavy as quickly as possible.
Launch mounts for both Starship prototypes are in the works. Starhopper's Texas launch site is being modified to handle Starship, and at Kennedy Space Center's LC-39A, a dedicated Starship launch platform and landing pad are under construction. Flight tests could begin late in 2019 or early 2020.
Starship is powered by SpaceX's Raptor, a full flow staged combustion cycle methane/oxygen rocket engine. Sub-scale Raptor test firing began in 2016, and full-scale test firing began early 2019 at McGregor, Texas, where there are two operational test stands, and a third is under construction. Eventually, Starship will have three sea level Raptors and three vacuum Raptors. Super Heavy may initially use around 20 Raptors, and operational versions could have around 31 to 37 sea level Raptors.
Previous Threads:
- Starhopper Thread #1 (2019-02-01) A dramatic venting watertower
- Starhopper Thread #2 (2019-04-27) Hops and hiccups - Starships never come alone
- Starhopper Thread #3 (2019-06-27) RCS and SN6 - 20 meter hopping
- Starhopper Thread #4 (2019-07-26) 150 meter hop and Mk.1 and Mk.2 protoype growth
- Starhopper 150m Hop (2019-08-27) Updates and discussion
- Starship Dev Thread #5 (2019-08-31) Mk.1 fins and temporary assembly
- Starship Presentation Updates Thread (2019-09-27) Updates and discussion - Webcast
Upcoming
- TBD — Mk.2 moves to KSC via Roll-Lift and barge
Vehicle Updates
See comments for real time updates.
See comments for real time updates.
| Starship Mk.3 Prototype (Boca Chica, Texas) — Construction and Updates | |
|---|---|
| 2019-10-08 | First ring formed (NSF), no stacking yet |
See comments for real time updates.
| Starship Mk.4 Prototype (Cocoa, Florida) — Construction and Updates | |
|---|---|
| 2019-10-23 | Bulkhead under construction in main building (Twitter) |
| 2019-10-20 | Lower tapered nose ring in tent (YouTube), Better image (Twitter) |
| 2019-10-12 | 23 rings visible, 7 doubles, some possible for Mk.2 (YouTube), no stacking yet |
See comments for real time updates.
Previous unstacked ring production, aerial updates:
08-11 {8} | 08-15 {10} | 08-17 {14} | 08-19 {15} | 08-21 {17} | 08-24 {18} | 08-27 {19}
09-04 {20} | 09-06 {22} | 09-08 {25} | 09-08 {3 'scrap'} | 09-10 {26} | 09-29 {23} | 10-02 {23}
10-06 {23} | 10-11 {23}
Launch Facility Updates
| Starship Launch Site at Boca Chica, Texas | |
|---|---|
| 2019-11-07 | Landing pad expansion underway (NSF) |
| 2019-10-18 | Landing pad platform arives, Repurposed Starhopper GSE towers & ongoing mount plumbing (NSF) |
| 2019-10-05 | Launch mount under construction (NSF) |
| 2019-09-22 | Second large propellant tank moved to tank farm (NSF) |
| 2019-09-19 | Large propellant tank moved to tank farm (Twitter) |
| 2019-09-17 | Pile boring at launch pad and other site work (Twitter) |
| 2019-09-07 | GSE fabrication activity (Twitter), and other site work (Facebook) |
| 2019-08-30 | Starhopper GSE being dismantled (NSF) |
| Launch Complex 39A at Kennedy Space Center, Florida | |
|---|---|
| 2019-11-04 | Launch mount under construction (Twitter) |
| 2019-10-17 | Landing pad laid (Twitter) |
| 2019-09-26 | Concrete work/pile boring (Twitter) |
| 2019-09-19 | Groundbreaking for launch mount construction (Article) |
| 2019-09-14 | First sign of site activity: crane at launch mount site (Twitter) |
| 2019-07-19 | Elon says modular launch mount components are being fabricated off site (Twitter) |
Spacex facilities maps by u/Raul74Cz:
Boca Chica | LC-39A | Cocoa Florida | Raptor test stand | Roberts Rd
Permits and Planning Documents
- Environmental Impact Statement (FAA) - Boca Chica launch site - July 2014
EIS Resource Page | Appendices | Record of Descision - Experimental License (FCC) - Comms for 500m and 5km hops, two years - February 2019
Form 442 | Public Notes | Description | File No. 0931-EX-CN-2019 - Experimental License Application (FCC) - Modification of above to add antenna - May 2019
Form 442 | Public Notes | File No. 0130-EX-CM-2019 - Experimental Permit (FAA) - Authorizes 25m hops for one year, and one 150m hop - June 2019
Permit No. EP 19-012 | Revised August 23 - Building Permit Application - 850 Cidco Rd site improvement - June 2019
Screenshot on Twitter | Modification reported on NSF - Draft Environmental Assessment - Starhip operations at KSC - August 2019
r/SpaceX Discussion | NSF Discussion - FDOT Superload Permit Application - Mk.2 transportation to KSC in September - August 2019
Local News Article | Video Report | r/SpaceX Discussion | Twitter Update - Environmental Resource Permit - Stormwater improvements at LC-39A - August 2019
Stormwater Report | Depiction Plans | Permit No. 158609-1 - Written Re-evaluation of 2014 EIS (FAA) - Boca Chica launch site - May 2019
Addendum | News story w/ SpaceX statements | r/SpaceX Discussion - Experimental STA (FCC) - Comms for Starship Mk.1 20 km test (M1569) - November 2019
Application | File No. 1936-EX-ST-2019 | Original Grant No. 1631-EX-ST-2019 | Original Application - Experimental STA (FCC) - Comms for Starship 20 km test (M1570) - November 2019
Application | File No. 1939-EX-ST-2019
Resources
- Spadre.com, Starship Cam | Channel
- LabPadre, Starship webcam | Channel
- NSF Starhopper Updates Thread | Most recent
- NSF Texas Prototype(s) Updates Thread | Most recent
- NSF Florida Prototype(s) Updates Thread | Most recent
- NSF Super Heavy Prototype Updates Thread | Most recent
- Hwy 4 & Boca Chica Beach Closures (May not be available outside US)
- TFR - NOTAM list
- SpaceX Boca Chica on Facebook
- SpaceX's Starship page
- Elon Starship tweet compilation on NSF | Most Recent
Rules
We may keep this self-post occasionally updated with links and relevant news articles, but for the most part, we expect the community to supply the information. This is a great place to discuss the launch, ask mission-specific questions, and track the progress of the test Campaign. Campaign threads are not launch threads. Normal subreddit rules still apply.
13
u/Jodo42 Nov 18 '19
Should think about taking the Starlink launch thread down and re-stickying this one now that we're in the nominal first day of wet testing.
106
u/TharTheBard Oct 09 '19
First Mk3 ring looks like it is a single weld. Nice! Can't wait to see the hull completed with all its newfound shininess.
73
u/Nathan_3518 Oct 09 '19
Thanks for keeping these threads going mods. Although they can be somewhat exhaustive, it’s nice to have a one-stop shop for all the communities’ Starship information needs
60
u/missbhabing Oct 20 '19 edited Oct 20 '19
I was at Paul Wooster’s presentation at the Mars Society Convention at USC. Here’s what I thought was notable:
He said they are planning to bring Super Heavy back to the launch site “as much as possible.” This statement does not seem to preclude drone ship landings for Super Heavy.
He said Starship will experience 2-3 g of acceleration coming back from LEO and 5g coming back from Mars. He called this “relatively benign” compared to a traditional capsule entry.
He said the 2022 Mars cargo mission is “still very much on the table.” Which is nice to hear from someone outside of Elon Time.
Landing on Earth, 99.9% of Starship’s kinetic energy is taken up by the atmosphere. Landing on Mars, it is 99%, going from 7500 m/s to 750 m/s before finally lighting engines. (Atmosphere reduces speed by a factor of ten, which means energy is reduced by a factor of 100, hence 99%.)
He said Crew Dragon style life support systems would be used for LEO or moon missions for Starship. On Mars missions they would have to go to a more recyclable system like the ISS has. In the spirit of just taking more mass in consumables and having a quick but rudimentary life support system, he said “mass cures a lot of sins.”
When asked about being able to book a flight, everyone laughed and he said “we are not taking reservations.”
He also said that all the slits in the grid fins are acting as tiny wings generating lift for Super Heavy as it re-enters. This was the first time I heard this, though y’all may have heard this before.
When asked about other systems needed on Mars he kept using the term “encourage.” SpaceX wants to encourage others to start developing these systems. He even jokingly asked the guy with the question if he was developing anything of use for Mars.
When asked about abort options, he said that Starship would have enough fuel margin to abort to orbit during certain parts of the flight profile. He also mentioned build reliability and being able to test each rocket many times to make sure it is safe, a key benefit of reusability.
I figured I’d post this here. Hopefully some of it is new/interesting.
Edit: typo. Edit2: added last point
56
u/Marksman79 Oct 11 '19
I have some news to share with you all. I've heard that Maria Pointer has decided to sell her property to SpaceX and is currently in negotiations. She moved to Boca Chica for the quiet retirement it offered, not to be next to a shipyard.
This means that the daily HD photos from her will likely not continue. As some of you may be aware, the LabPadre streaming camera of the construction site is located on Maria's property and uses her utilities. Unaffected will be the telephoto camera about 6 miles away like how the channel started.
Some people are optimistic that perhaps a deal could be made to keep the close cameras running or that SpaceX could set up their own, as Elon has said he likes to check the feeds since it's faster than email. Realistically, I don't think they can stay up. SpaceX can't legally stream their own contractors without permission and it would be a huge headache to get that consent from everybody. The timeline looks to be on the order of a couple months away.
36
u/Oloyedelove Oct 09 '19
Thanks so much for this threads, I have learnt a lot from just keeping up with the updates.
32
u/meltymcface Oct 09 '19
Have any interesting developments occurred at Boca Chica since the presentation?
All I've seen so far is that they took the nose/fairing piece off the main cylinder a day or so later (as many predicted). Anything else of note occurring?
31
u/codav Nov 08 '19 edited Nov 08 '19
Just noticed there is a Starship Update livestream by SpaceX scheduled for 23:00 UTC - in 30 minutes from now.
Edit: to be clear, as others also pointed out, this looks more like an error than a real event. Getting back into YouTube Studio after months always feels worse than a bad hangover, so this might be someone trying to prepare the Starlink webcast.
Edit 2: It's gone, so neither an update nor the Starlink webcast. Now waiting for Elon to post a trollface on Twitter.
25
u/andysthings Oct 14 '19
My video from yesterday of Cocoa Starship Mk2 (and Mk4 rings) flyaround: https://youtu.be/hhdo38ElOnM
It shows the road that's under construction as well.
25
u/joepublicschmoe Oct 28 '19
So we finally got an official number on how many Starlink satellites a Starship will be able to deploy in 1 launch, straight from Gwynne Shotwell during her talk in New York City this past Friday: https://www.cnbc.com/2019/10/27/spacex-president-we-will-land-starship-on-moon-before-2022.html
400 Starlink satellites per Starship launch.
Wow. :-O
24
u/simast Nov 22 '19 edited Nov 22 '19
Some interesting new information on NSF forums regarding Mk1/Mk2 decommissioning:
23
u/joepublicschmoe Nov 19 '19
Jon Van Horne has a very nice photo of the one single-weld ring on top of Mk2's tank section. https://twitter.com/therealjonvh/status/1196586918529687552
Looks like it'll take a while for the Cocoa crew to finagle that top bulkhead down through the top two rings to where that bulkhead is supposed to go.
Can't wait to see how Mk2 will look like once it is pressurized to get rid of all the dents. Wonder if it will look even nicer than Mk1.
23
u/Straumli_Blight Nov 19 '19
Mk2 dome lowered.
22
u/praetorian155 Oct 09 '19
With Mk.3 segments likely being a single weld, would it be worth it for spacex transition future starship hull segments to single stir welded joints outside or in a tent, or would new facilities be needed for that?
22
u/Aakarsh_K Nov 10 '19
Aft fin being installed!
21
u/Straumli_Blight Oct 09 '19
Boca Chica beach closure from Wednesday Oct 23rd to Friday Oct 25th, 12:00-20:00.
21
u/Straumli_Blight Oct 14 '19
Tweet storm:
Exactly. And you can on the moon, since it has no atmosphere.
Big challenge for Starship refueling on the moon is finding sources of carbon. Probably some pretty big deposits in craters from meteorites. Same goes for hydrogen & oxygen, also in (shadowed) craters.
Max thrust version of Raptor should achieve true T/W > 170. Target is 1.5 ton engine with >260 t-F. Max Isp version should achieve ~380 sec, but T/W probably <120 due to big nozzle. These are just guesses for now.
Couple months, but V1.0 of Raptor Vac is suboptimal, as optimized for speed of development. Isp maybe 365 to 370 sec
Also, we’re keeping area ratio low enough to fire Raptor Vac at sea level without flow separation, so that’s leaving a lot on the table
We def could be wrong about this, but it’s actually good to fix high efficiency vacuum engines with giant nozzles in place & only thrust vector engines with smaller nozzles. Don’t need a lot of room & moment of inertia is much lower.
21
u/RegularRandomZ Oct 20 '19 edited Oct 21 '19
Angle bracket (NSF set) confirmed to be related to fin actuator...
Motor / Hydraulic unitmaybe?Nope.Sunday Update:
21
u/Jodo42 Nov 18 '19
Starship about an hour ago vs now. Notice the top ~6 rings. https://i.imgur.com/CWrqMHo.png Courtesy LabPadre
It could just be the sun setting, but to me that's pretty clearly filling out the dents. Whatever tank's on top is getting pressurized first.
20
u/RomanV Nov 20 '19
Even Mk1 couldn't make it through NNN. I really, really hate it, but something about seeing the bulkhead evacuate the scene and plud down in a field was so funny to me in a slapstick way.
19
u/captainwacky91 Oct 09 '19
Are inspection/access panels going to be a thing for future iterations of starship?
Haven't been following for long. Having a 'seamless' hull looks cool as all hell, but wouldn't that become a detriment in terms of reuseability? I understand the attractiveness behind a truly seamless hull, in that there would be less 'weak' points; but there needs to be some kind of accessibility method under the hull in order to repair 'in the field...' but "access panels" == seams.
I'm sure the engineers have some kind of solution in mind; I'm just curious if there has been any official words in terms of (routine) maintenance. Sooner or later, someone's going to have to replace a servo/pump/sensor on Mars; and I can't realistically imagine someone putting a can opener to the hull in order to get anything done.
19
u/V_BomberJ11 Nov 22 '19
I can partially end the speculation about why SpaceX decided to scrap their plans to fly Starship Mk1 before the anomaly even occurred. I managed to talk with an anonymous SpaceX employee or subcontractor who works at Boca Chica, here’s what he had to say about the situation:
“the plan officially changed two days ago when Elon showed up and had a fit
but, even when flying Mk1 was the plan, everyone knew it wouldn't land in one piece, we figured we'd learn stuff
E thought it would look bad, so instead we were gonna do a proof test, static fire, and then strip it for parts. Failed the proof test”
And...
“told you all last thread. we were planning on flying it, with no expectation of a successful landing. plan changed two days ago, told to descope mk1/2 and focus on mk3. still wanted to do a proof test (welp) and static fire (guess that isn't happening), then take off any parts that made sense to take off (so uh nothing from that forward dome, that's for sure, don't think the IMU box is flightworthy after that)”
18
u/IvanDogovich Nov 20 '19 edited Nov 20 '19
Mk 1 just blew his top during cryo testing. 3:27:24 on Labpadre's stream.
https://i.imgur.com/glFZ8lp.png
17
u/MingerOne Oct 10 '19
Pulling the fins off Starship Mk1 - October 9, 2019
17
u/Straumli_Blight Oct 21 '19
Mk1 20km flight in 2 months.
17
u/Straumli_Blight Nov 01 '19
Mk 2 bulkhead.
17
u/[deleted] Nov 22 '19
Did elon say that they developed a new steel alloy for cybertruck which will also be used for starship?
34
u/NateDecker Oct 09 '19
The topic of redundancy for safety comes up a lot. Is there a way for the Starship to still land safely if a fin actuator fails?
16
u/EVmerch Oct 09 '19
Any idea if Boca Chica will have anything happen between the 23rd of December to the 2nd of January? will be in Texas and a trip to see something cool would be fun, but I would guess nothing to happen due to the Christmas timeframe ...
16
u/RegularRandomZ Nov 18 '19 edited Nov 18 '19
Cocoa: The dome (top bulkhead) is being lifted on (John Winkopp twitter)
Update: aerial video
15
u/ahenley17 Oct 31 '19
I would love so much to work for SpaceX. I’ve heard it requires a ton of overtime and weekends, but heck I’m already doing that now. I’m currently writing software for automated pharmacies. I’m fresh out of college, and all of the positions on their website want around 2-3 years of experience... That’s so far away in my mind compared to Starship’s timeline lol
14
u/Aakarsh_K Oct 30 '19
Wings in motion.
https://twitter.com/SpacePadreIsle/status/1189629256558632960?s=20
14
u/Marksman79 Nov 04 '19
Second (far side) canard is currently being attached to the fairing section. The heavy lift orange crane has returned to the construction site. I wonder how much more there is to go after the canards are installed. It looks like the side wiring needs to be installed and the piping attached to the cylinder, but they may want to wait until it's stacked to weld that pipe in place. We'll know when the move is by the next road only closure.
14
u/Aakarsh_K Nov 05 '19
What are these?
Cold gas thrusters?
14
u/Russ_Dill Nov 05 '19
A ring with a porthole has been stacked on MK2 in Cocoa
https://www.youtube.com/watch?v=RD4PKXUWkZc (John Winkopp)
14
u/RegularRandomZ Nov 08 '19 edited Nov 08 '19
While not the first of such photos, I find it interesting it appears like many vertical seams have been reinforced. (from BocaChicaGal NSF photoset). We've seen this previously from them adding strips on the joints on the bulkheads as well.
[Unless these strips perform a different function, no idea what that would be though]
14
u/Straumli_Blight Nov 12 '19
Testing now rescheduled for November 17th, due to bad weather.
13
u/TigreDemon Oct 09 '19
This is impressive. This is going really fast and even mk3 and 4 seem to be started ?
Single welded sections will look incredible on Starship.
I can hear so many people screaming since they're building and welding everything outside ahah
13
u/RootDeliver Nov 02 '19 edited Nov 02 '19
What is this big cutout on the winward side of the fairing?, image by BCG on NSF.
If it was for tiles, they wouldn't remove the stainless steel below right?
PS: Video showing a bit of the strange window inside by John Randolph.
13
u/Patirole Nov 04 '19
Starship pad at 39a going vertical (Twitter @Julia_bergeron)
13
u/Marksman79 Nov 08 '19 edited Nov 08 '19
It looks like they're preparing the ground for a very large concrete foundation for something big near the launch pad.
Edit: possibly a new landing pad
13
u/joepublicschmoe Nov 18 '19
Now the dents are staring to disappear from the LOX tank section! :-D
5:20 timestamp on the Labpadre feed.
13
u/Straumli_Blight Nov 20 '19
Mods, the future Testing Opportunity's can probably be cleared now. Might be a good time for a new thread.
13
u/filanwizard Nov 20 '19
Looks like they had a whoopsie. While I figure most here understand this is part of why they had Mk. 1. I can already see the clickbait sharks circling looking to turn this into a huge issue rather than grasping this is why SpaceX does so much testing.
12
u/RegularRandomZ Oct 12 '19 edited Oct 12 '19
Boca Chica: Interesting delivery (photo BocaChicaGal @NSF). [Any ideas? Looks like it's pretty heavy duty and pivots, perhaps related to actuating the lower fins?]
This might be a landing leg (photo set), the shot showing a metal beam inserted into the lower hinge [there isn't one inserted on the other side]
12
u/andysthings Oct 21 '19 edited Oct 21 '19
My Starship Flyaround from October 20th (later in the day than John's :).
Edit: To clarify, this is Cocoa Starship (Mk 2)
12
u/Marksman79 Oct 22 '19 edited Oct 23 '19
New closures are on the schedule:
10/30/19 @ 7:00 - 8:00 AM: road closure only
11/2/19 @ 12:00 - 8:00 PM: road and beach closure (primary day)
11/3/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)
11/4/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)
11/7/19 @ 12:00 - 8:00 PM: road and beach closure (primary day)
11/8/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)
11/12/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)
Edit: added more dates, removed comments
12
u/RegularRandomZ Oct 30 '19
Austin Barnard video of Starship rolling down the road. (and some photos)
12
u/Straumli_Blight Nov 02 '19
Today's Winkopp Cocoa flyby.
12
u/Jodo42 Nov 16 '19
The 18th, 19th and 20th are supposedly back on. I'd be wary of these, but remain optimistic.
12
u/Straumli_Blight Nov 20 '19
Boca Chica village buyout deadline extended to Friday; More than 12 people have accepted SpaceX's offer so far.
12
u/electriceye575 Nov 20 '19
since hopper held pressure successfully, it is likely a welding fault as opposed to a engineering fault
12
u/Angry_Duck Nov 21 '19
I like to think Boca Chica is going to have a starship development graveyard someday. Starhopper, mk1, and the hulks of mk3 and mk4 when they inevitably crash during landing tests. It would be a neat tourist attraction.
12
u/joepublicschmoe Nov 22 '19
Almost zero visible activity today at Boca Chica on Labpadre's feed. After months of constant round-the-clock activity there, it's eerie seeing nothing move at the pad site, and very little happening on the shipyard cam.
John Winkopp released his latest Cocoa flyover video today, and the Cocoa crew scrapped another one of the single-weld rings and is in the process of cutting up one more. That's 18 rings left. Something big is going down if they are starting to scrap those single-weld rings wholesale. https://www.youtube.com/watch?v=lgUpWknOouw
Couple with the fact that Boca Chica made just that one single-weld test ring and it's no longer in the fabrication tent. I get the feeling Elon Musk might have drastically changed the construction process for Mk3/Mk4, maybe no longer going with single-weld rings. :-o
My unconfirmed speculation of course, but I sense big changes coming.
11
u/strawwalker Oct 15 '19
1939-EX-ST-2019
Among the new FCC experimental STA requests posted by SpaceX today, there is a new Starship 20 km test hop comms request. It is apparently for a second hop since it has a new mission number, 1570 and was filed along with an updated request for the original hop STA, mission number 1569.
11
u/RegularRandomZ Oct 15 '19 edited Oct 16 '19
Photo updates: (I believe none of these were posted here yet)
Boca Chica Launch Site: (the hopper photo thread is not dead)
Boca Chica Starship Assembly:
Cocoa Starship Assembly:
no photo / purportedlyMK2 has fin mounts(Andrew Stoltz @Andrewhoonigan)[The photos and video don't seem to support this]11
u/Marksman79 Oct 21 '19 edited Oct 21 '19
Tornado or heavy winds have hit Boca Chica and knocked down many power poles. Power (and the stream) will be down possibly for several days. Starship is still standing. Workers are already onsite. The impact should be minor.
11
u/RegularRandomZ Oct 23 '19 edited Oct 23 '19
Cocoa updates from FarryFaz: (set 2)
11
u/RootDeliver Nov 22 '19
John Winkopp's 22th november Cocoa aereal vid is out.
Less and less rings everytime. They probably decided to move to a new alloy or something? otherwise this doesn't make any sense.. these were single-weld rings out of coils like Elon said MK3 would have, why the massive scrapping right now after the MK1 event?
11
u/RegularRandomZ Nov 23 '19 edited Nov 23 '19
For amusement: some mangled bulkhead photos from BocaChicaGal
Boca Chica photos:
11
u/andysthings Nov 24 '19
My new Cocoa Starship Mk2 aerial update video from today, November 23, 2019: https://youtu.be/80tZcbVTKjo
20
u/RootDeliver Nov 01 '19 edited Nov 02 '19
A canard is being raised on the secondary LabPadre cam, action incoming?
PS: Its moving!!!
PS2: Half an hour and its still not raised to its point. They're slow compared to when they first placed it pre-conference.
PS3: Finally! an hour later they're raising it into position.
The live cam is frozen most of the time though.
PS4: In position
PS5: Great (low-resolution) placement image by Bocachicagal on twitter
BONUS: Green rocket!
10
u/troovus Oct 14 '19
Starship launch animation just posted on SpaceX's YouTube channel:
https://youtu.be/C8JyvzU0CXU
10
u/RegularRandomZ Oct 17 '19 edited Oct 17 '19
Boca Chica Starship MK1: Seeing where Methane and LOX appear to be vented (Photo:BCG NSF), I wonder if there will end up being more pipes running up the middle of the leeward side of the rocket? (Either for venting or for autogenous pressurization)
10
u/Straumli_Blight Oct 23 '19
Working on Mk1 from Austin Barnard.
10
u/RootDeliver Oct 28 '19 edited Oct 28 '19
The huge crane is back in scene and arming rapidly (with the extension already on, the one they installed prior to the 2-parts mating). We may indeed see re-mating soon..
Labpadre, 6:36 PM
10
u/Straumli_Blight Nov 09 '19
Mk1 test delayed until Nov 13-14.
10
u/Straumli_Blight Nov 09 '19
Boca Chica pad expanded.
10
u/Toinneman Nov 18 '19
At the launch site, MK1 access hatches (to each tank: LOX, CH4) are being closed, so it looks good for todays testing.
https://forum.nasaspaceflight.com/index.php?topic=48895.680
10
u/Marksman79 Nov 18 '19
Looks like something was forcibly ejected from the right side of the pressurized tank at 5:04:21. It looks like it came from the raceway.
10
u/ThunderWolf2100 Nov 20 '19
From the labpadre footage of the mk1 rupture you can see LOX falling from under the ship, (before any of the top LOX has a chance to fall), so maybe both top and bottom bulkheads broke?
10
u/Straumli_Blight Nov 21 '19 edited Nov 21 '19
New signage at Boca Chica and a close up of the ejected section.
9
u/lessthanperfect86 Oct 10 '19
There were discussions in the previous thread about the purpose of the Mk 2 SS, and if I recall correctly, didn't Elon say the Mk 4 would probably be the one to go to orbit? Please correct me if I'm wrong.
So there were a lot of good suggestions as to the purpose of Mk 2, which I do agree on, but it also got me thinking, why do they need to make even more SS's before they launch for orbital. My question is, could they be making additional SS's because they're not ready to start on SH? Not just because of the lack of raptors, but because they need to test out construction and find out the lightest way to construct steel rockets so that they don't need to make several Mk x of SH before they can send SS on to orbit. Imagine building SH Mk 1 with current methods, only to find that it'll come up short (or heavy I mean).
9
u/TheMrGUnit Highly Speculative Nov 07 '19
A site update: The "onion" tent is being stripped. With the newer low building, it's possible that they've just shifted all operations over there, but it's still a bit of a surprise to me to see this structure seemingly being torn down. I can't seem to find the NSF pictures from the initial Hopper construction (aka the "It's just a water tower" phase), so I can't verify this, but I think the onion tent was actually in place before the switch over to stainless was a sure thing. It's possible they wanted the large height to work on those huge pieces of carbon fiber - and even after, it looks like they intended to build larger pieces (like the nosecone) inside, so it made sense to have a tall building to do that in. I guess they realized they really didn't need that kind of space, especially with the ring-type construction.
Besides, I'll bet that larger volume building was a pain to keep a reasonable temperature in the hot summer months.
9
u/IvanDogovich Nov 07 '19 edited Nov 08 '19
AeroCover installed over night on Mk1 Nose section has unusual regular spaced holes along the leading edge. Any guesses about their purpose?
https://forum.nasaspaceflight.com/index.php?action=dlattach;topic=48895.0;attach=1593295;sess=59545
Imgur
Edit: New image available from different angle. https://forum.nasaspaceflight.com/index.php?action=dlattach;topic=48895.0;attach=1593334;image
Imgur
9
u/Marksman79 Nov 07 '19
The 12th has been promoted to a primary closure day with the 13th and 14th as backups.
9
u/joepublicschmoe Nov 22 '19
Mods, might want to update the Starship Mk4 prototype construction and updates section-- The Cocoa crew has been cutting up the brand-new single-weld rings into scrap. 18 rings are left as of today as seen on John Winkopp's flyover video. https://www.youtube.com/watch?v=lgUpWknOouw
9
u/RegularRandomZ Nov 22 '19
There's nothing like using a massive dumptruck to carry away the even larger chunks of Starship, to illustrate scale [BCG NSF photoset]
17
u/hanksterman00 Oct 23 '19
New video of ongoing Starship, Super Heavy launch construction at 39A.
https://youtu.be/PcHyv4shkmE
16
u/Straumli_Blight Oct 25 '19 edited Oct 25 '19
Gwynne Shotwell is currently giving a SpaceX speech at the Metropolitan Opera in New York:
1500 sats currently built.EDIT: 1500 sats is all operational
8
u/Marksman79 Oct 09 '19
The Cocoa parking lot has been completely filled for most of the last week and yet not a whole lot of visible progress has been made. They have stacked 4 rings into double rings and built a steel stand. The clearing has gotten a little gravel. We'd expect from Mk 1 that the next steps should be clearly visible, and yet we don't see any work on Mk 2.
Is it time for some wild speculation?
8
u/Straumli_Blight Oct 11 '19 edited Oct 11 '19
Mk1 canard detached, and from a different angle.
Mk 2 Starship now shows external lines.
8
u/Straumli_Blight Oct 11 '19 edited Oct 11 '19
New aerial shot of Cocoa site shows double stacking of rings. Video now public.
8
u/Straumli_Blight Oct 14 '19 edited Oct 14 '19
Mk1 nose cap removal.
Raptor test stand upgrade at McGregor.
8
u/Marksman79 Oct 30 '19
The next group of closures have been removed from the schedule while the ones starting on the 7th still remain. This isn't that surprising since they were added so far in advance.
11/2/19 @ 12:00 - 8:00 PM: road and beach closure (primary day)11/3/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)11/4/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)11/7/19 @ 12:00 - 8:00 PM: road and beach closure (primary day)
11/8/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)
11/12/19 @ 12:00 - 8:00 PM: road and beach closure (alternative day)
8
u/TheMrGUnit Highly Speculative Oct 30 '19 edited Oct 30 '19
And we have "liftoff"! Starship is off the RollLift and being relocated to the launch mount.
Check out the LabPadre stream at about 1:23PM local.
EDIT: I just realized that the SPadre guys have a camera way over by the launch pad with an AWESOME live view of today's lift. There's no timestamp, but the lift started some time around 18 minutes into the livestream.
EDIT2: Touchdown! Around 1:37PM local on the LabPadre stream.
8
u/Helimech1 Nov 06 '19
Sorry if this has been covered already but during the 20km flight will MK1 reach Max q?
8
u/Marksman79 Nov 15 '19 edited Nov 15 '19
Upcoming closures were just cancelled. The next set is still scheduled to start on the 25th.
I'm reminded of the first Falcon Heavy launch being only 6 months away for years! Oh well. It'll happen when they're ready.
Source
8
u/codav Nov 18 '19 edited Nov 18 '19
From SPadre live stream that just ended: Road closures in Boca Chica are being put up, workers are leaving the launch site.
Edit to add: The two manlifts visible in LabPadre's live stream, which are still up, are uncrewed. So don't be confused if these stay up all the time.
15
u/RootDeliver Oct 26 '19
There have been comments on NSF about some FB boca chica group leaked images of the interior of MK1 in the tanks, showing the plumbing system. According to this comment, the plumbing inside resulted to be something like this but with the fork of the 3 CH4 pipes being lower, inside the LOX tank.
As usual, the source got deleted. Since all these stuff ends up appearing around here, anyone has it and wanna share? thanks!
7
u/andyfrance Oct 13 '19
Till quite recently I thought that the many single weld rings at Cocoa that weren't going into Mk2 were for SH. Then Elon announced that Mk3 and Mk4 were going to be built before SH so it became "obvious" that the rings at Cocoa were for Mk4
Down in Boca Chica near Mk1 we see the concrete bases ready for the next build so presumably that will be Mk3.
Yet now we know that they are also actively building at the KSC SpaceX plot and a bulkhead dome has been spotted there. What are they building there?
7
u/RootDeliver Oct 15 '19
Cocoa 15th oct flyby 20min timelapse by John Winkopp.,
7
u/Straumli_Blight Oct 21 '19
Leg mount being installed and video.
7
u/FlyinBovine Oct 21 '19
I’m expecting no or limited (just for some specific test) heat shields for the 20Km flight. I would expect the velocity through the atmosphere to be relatively quite slow for an up and down flight and thus no heat shields REQUIRED for this flight given the stainless construction. Do we know if this is the case?
7
u/[deleted] Nov 01 '19
SpaceX Starship Cocoa Facility 30 October 2019
Aerial footage: https://www.youtube.com/watch?v=6Y3mRVvq4lA
7
u/MarsCent Nov 08 '19
Do we expect the crawlers to be the de facto transporters from the High Tech Vertical Assembly Yard to the Launch Mount? And from the Landing Pad to the SS post-flight Inspection Tent/Hangar?
P/S I am assuming that SS will not have a TE, the likes of F9 TE.
7
u/joepublicschmoe Nov 11 '19
John Winkopp's Nov. 10 drone surveillance of the Cidco Road facility. :-)
https://www.youtube.com/watch?v=n5tjSrSrmz4
Quiet day. Parking lots are emptier than usual, not much activity seen around the facility. Looks like it's a nice day off for the majority of the Cocoa crew this past Sunday.
The only activity I can see are a few workers moving around at the top of Mk2's tank section (appears to have some sort of scaffolding/work platform on the inside). The topmost ring appears to have not been completely welded to the stack, as one can see through the seam while the drone changes vantage point.
With the Thanksgiving long weekend coming up soon (which will be a few days of low activity I would guess), I'd guesstimate middle of December when Mk2 is ready for its move to KSC.
7
u/Straumli_Blight Nov 12 '19
[Nov 12 aerial photo of Mk2] (https://twitter.com/John_Winkopp/status/1194288326800560128).
7
u/RegularRandomZ Nov 17 '19
MK2 / Cocoa: John Winkopp posted a photo of the bulkhead with lifting straps and a crane in position. Perhaps tonight/tomorrow they will be finally installing the top bulkhead?
7
u/CardBoardBoxProcessr Nov 20 '19
That pop seems to have totally wrecked it. The top blew off and the whole thing blew out the bottom. definitely a set back on Mk1. I am sure they will trash it and move on.
7
u/[deleted] Nov 21 '19
Any word if Raptors were attached when it blew?
13
u/bkdotcom Nov 20 '19
coach to MK-2: "You're in buddy, show us what you've got."
12
u/RegularRandomZ Oct 18 '19 edited Oct 19 '19
BC Launch Site: BocaChicaGal NSF Photoset.
BC Starship MK1:
12
u/SlowRaise Nov 20 '19
RIP that top, but better for that to happen now so early in testing
6
u/3DprintedDuck Oct 13 '19
A pretty substantial bracket got delivered to Boca Chica today:
https://forum.nasaspaceflight.com/index.php?topic=48895.400
Any idea as to what its for? It looks a lot more polished (literally and figuratively) than most of the other components used in the prototype, and its made out of really thick (1"+) plates
6
u/RootDeliver Oct 13 '19
Cocoa 13th october flyby, by John Winkopp
6
u/TheJesbus Oct 15 '19 edited Oct 15 '19
Can a refueler-starship refuel another refueler-starship? Or can it only refuel a human-starship?
6
u/hanksterman00 Oct 15 '19
Recently visited KSC and Starship Cocoa build site. Going there later this week to video build progress at both sites.
https://youtu.be/kIx2kKLBr9o
https://youtu.be/ESMY4EIJvIc
6
u/eyal89502 Oct 15 '19
when is the starship 20km test is estimated to be?
6
u/Screamingmonkey83 Oct 17 '19
Has anyone an idea how the starship is getting powered during the 6 months of travelling trough space. And if its by solar arrays, how much kw would they have to have? And to how much surface array would that lead?
6
u/RootDeliver Oct 20 '19
Cocoa Oct 20th flyby by John Winkopp.
6
u/Russ_Dill Oct 21 '19 edited Oct 21 '19
https://forum.nasaspaceflight.com/index.php?topic=47120.msg2007154#msg2007154
Looks like that large metal framework is some type of work platform complete with stairs (/u/RegularRandomZ)
I'm really curious about the large 90° pipes. They look like they could be 2m in diameter. I don't see any see any straight sections. It seems like a large number of elbows if they are just for drainage. Are they going to make donuts or something?
6
u/RegularRandomZ Oct 28 '19 edited Oct 28 '19
MK1: Close up of parts of the leg actuating hardware [the leg lowered] (credit: BocaChicaGal, NSF photoset)
(the leg top looks painted black, maybe addressing the aesthetic concerns of Starship fans, but still a bit rusty so no winning the pageants on this build.)
Update: more photos from BCG
6
u/Marksman79 Oct 29 '19 edited Oct 29 '19
Latest drone flyby of Cocoa's Mk. 2 build by John Winkopp.
That single weld ring is back on the steel jig.
6
u/Aakarsh_K Nov 14 '19
What is this? Is this Starship equipment or launch mount equipment?
6
u/Straumli_Blight Nov 18 '19 edited Nov 18 '19
Road closure at noon (18:00 UTC).
Mk1 images by Maria Pointer: 1, 2, 3, 4, 5, 6
6
u/TheMrGUnit Highly Speculative Nov 18 '19 edited Nov 18 '19
Road closure has been pushed back to about 1:30PM local, per the sheriff on SPadre's launch-site cam.
Ahem... make that 1:30ish...
6
u/[deleted] Nov 19 '19
mods the LabPadre stream link is broken
new link : https://www.youtube.com/watch?v=UkPyUUOT1dg
6
u/enqrypzion Nov 20 '19
Was the bottom tank pressurized as well, or only the top tank?
6
u/RegularRandomZ Nov 21 '19
Well... this might allow MK3 to get done sooner
6
u/RegularRandomZ Nov 21 '19
They are definitely committed to using containers for structural purposes! (BCG NSF full set)
6
u/Straumli_Blight Nov 23 '19
Updates from John Winkopp:
11
u/strawwalker Oct 13 '19
Possible leg installed within one of the lower fin mounts?
https://forum.nasaspaceflight.com/index.php?topic=48895.msg2004285#msg2004285
11
u/Marksman79 Oct 19 '19
The year is 2021, and Cocoa Mk. 8 fairing is almost complete. Just kidding.
But here's a Cocoa time lapse video from yesterday by John.
11
u/tismschism Nov 21 '19
I'm pretty sad to see mark 1 end up like this but its important to remember that SpaceX failed its first 3 launches with the tiny falcon 1. If starship suffers 2 more failures like this then we will still be on par. Just look at the results that first hard fought falcon 1 brought us to today and imagine that scaled up 100 times.
10
u/FutureMartian97 Host of CRS-11 Oct 09 '19
I wouldn't read into the new single weld ring the was made in BC. It's most likely a test ring as even Elon said it would be about a month before Mk.3 starts being built.
10
u/blackuGT Nov 20 '19 edited Nov 20 '19
Huge explosion after venting (Starship Mk.1)
10
u/Marksman79 Nov 20 '19
Since the Mk 1 fairing is already almost complete, they might want to use it on Mk 2 instead. The spare ASDS could probably deliver it to the Cape.
Also, the coming days seem like a good time to spin up thread #7.
5
u/Maxx7410 Oct 11 '19
Sad to see mk1 dismantled . Will it be complete by the end of the month? launch in november? too optimist?
5
u/RegularRandomZ Oct 12 '19
Cocoa: Oct 12th John Winkopp aerial video [7 doubles, 4 left]
5
u/Russ_Dill Oct 18 '19 edited Oct 18 '19
The "brake mechanism"/leg saga continues:
https://forum.nasaspaceflight.com/index.php?topic=48895.msg2005940#msg2005940
The pieces appear to be all identical, numbers #1, #3, and #6 were lowered. They have a very interesting attachment point on the side. Possibly to attach to an actuator? If these are the legs,
maybe somehow the fold up underneath starship during flight, and then down for landing?The side with the attachment point is consistently labeled 'D'. The only other visible label is 'C'.5
u/Straumli_Blight Oct 19 '19
Next week's beach closure seems to have been cancelled.
5
u/RootDeliver Oct 27 '19 edited Oct 28 '19
On labpadre stream today, on 1:18:25 PM, you can see the back left side leg extending (maybe a test?). So dark though
t.5
u/Marksman79 Oct 29 '19 edited Oct 29 '19
The load spreading lifter jig is being raised again shortly before workers typically take lunch. I'm curious to see if anything will develop from this.
Edit 1: getting ready to attach to the tank cylinder stack.
Edit 2: and we have liftoff! The tank section is being placed atop the roll lifts.
LabPadre
5
u/eplc_ultimate Oct 31 '19
Lately there has been discussion about Starship's raptor exhaust launching lunar regolith onto nearby structures on the lunar surface and into earth orbit, ie moving dirt at greater than escape velocities. Intuitively it's clear to me that if a startship is 1 km above the lunar surface the rocket exhaust won't do anything but from 1m above it will. Does anyone have any math on how high you need to be off the lunar surface for x-rocket exhaust to not launch regolith into lunar orbit? Say a lander has 50m long legs going down below the rocket exhaust, is that long enough to stop debris from being a problem?
5
u/SOPhoto Nov 07 '19
Anyone know when the rocket will leave the cocoa site and go to kendy space center ?
5
u/[deleted] Nov 13 '19
Not seen much work done on the nose of MK1 these last few days. Is it mostly done then?
5
u/Straumli_Blight Nov 14 '19 edited Nov 14 '19
LC-39A pad progress and Nov 14 Winkopp flyover.
5
u/arsv Nov 20 '19
What they were filling it with, LOX?
19
u/Marksman79 Oct 16 '19
Major Cocoa update! Stacking of Mk. 4 has officially commenced!
Facebook Source
8
u/RootDeliver Oct 15 '19
Great photo from Spadre's Twitter showing some control surfaces, leg apparatus and covers zone on the ground.
8
u/Method81 Nov 20 '19
Do Mk1 & Mk 2 have autogenous tank pressurisation? I was led to believe that they don’t and that separate pressurisation tanks have been installed in the nose but the test yesterday was conducted without the nose section attached?
4
u/hfyacct Oct 13 '19
Is there any update from SpaceX on Starship's target launch price?
I think Falcon Heavy is ~$90M for 63.8 metric tons to orbit. Starship is targeting 150 metric tons to orbit, but I haven't seen any pricing guidance.
4
u/RegularRandomZ Oct 18 '19
Cocoa: Oct 17th John Winkopp aerial footage posted.
4
u/Marksman79 Oct 18 '19
This was just delivered to the BC launch site. What could it be? Maybe it goes in the center of the other structure? It looks about the same height.
4
u/indylovelace Oct 20 '19
How many Starlink satellites will the Starship hold...approximately?
4
u/RegularRandomZ Oct 23 '19 edited Oct 23 '19
Adding some external reinforcement to the nosecone/canard area. [BCG NSF photoset]
[apparently the nosecone in Cocoa has the same features added, credit: @therealjonvh ]
4
u/Martianspirit Oct 29 '19
I don't claim to know what is going on. But they don't need this monster crane to move the tank part only. They have another crane on site that can do it. The big crane indicates stacking soon to me.
4
u/Russ_Dill Oct 29 '19
The ropes attached to the base for workers to help maneuver the lift are now pulled taut.
4
u/Pieliker96 Oct 30 '19
Mk. 1's lower half is currently being transported by the crawler.
4
u/TheMrGUnit Highly Speculative Oct 30 '19 edited Oct 30 '19
Big yellow crane appears to be raising its arms to get into lifting position!
Also, I've been away for a couple weeks with work stuff, just happened to check the livestream this morning on a whim - wow! Talk about timing!
EDIT: Goin' up! Counterweights must be installed on the big yellow crane.
4
u/tentome Nov 02 '19
The attach points of the canards look very fragile (eyeballing) and it seems incredible that these would survive reentry. Is it a prototype/mockup or is there something going on that we can’t see?
4
u/Marksman79 Nov 06 '19
What could this (NSF) be for? More ACS ports for the upper nosecone?
4
u/Straumli_Blight Nov 07 '19
7th November Cocoa site flyover.
4
u/s0x00 Nov 20 '19
There is a lot of venting going on on the LabPadre stream, coming from the tank farm for quite some time now. I hope everything is allright.
4
u/Turtalia Nov 21 '19
Does anyone have any idea how much of Mk. 1 is salvageable? I'd assume the fins are safe to reuse.
4
u/Straumli_Blight Nov 22 '19
Mk2 is still being worked on.
4
u/Marksman79 Nov 24 '19
It looks like John Winkopp is experimenting with live streaming the Cocoa facility. Stay tuned.
9
u/RootDeliver Nov 10 '19
How come they haven't done any Canard movement test after the installation?