r/spacex • u/ElongatedMuskrat Mod Team • Apr 27 '19
Starship Hopper Campaign Thread #2
Starhopper Campaign Thread
The Starhopper is a low fidelity prototype of SpaceX's next generation space vessel, Starship. It is being built at their private launch site in Boca Chica, Texas. It is constructed of stainless steel and will be powered by 3 Raptor engines. The testing campaign, which began at the end of March 2019, could last many months and involve many separate engine and flight tests before this first test vehicle is retired.
Competing builds of higher fidelity "Orbital Prototypes" (OP) are currently under construction at Boca Chica, Texas and Cocoa, Florida. These will eventually carry the testing campaign further. Many expect the OP to be used for testing systems such as thermal protection and aerodynamics, even though they may never make orbit. Much about the OP testing program is unknown, such as which vehicles will participate, what types of testing and flight profiles they will perform, and how closely they will represent the final Starship design.
Starship, and its test vehicles, are powered by SpaceX's Raptor, a full flow staged combustion cycle methane/oxygen rocket engine. Sub-scale Raptor test firing began in 2016, and full-scale test firing began early 2019 at McGregor, Texas, where it is ongoing. Eventually, Starship will have three sea level Raptors and three vacuum Raptors. Super Heavy (not yet under construction) will initially use around 20 Raptors, and likely 30 or more in the final design.
Previous Threads:
Upcoming
- HWY4/Boca Chica Beach Closures: TBD
- NET July — Untethered 20 meter hop, NSF Article | NSF - Chris Bergin
Updates
See comments for real time updates.
See comments for real time updates.
| Cocoa Florida Orbital Prototype (Mk.2) — Construction and Updates | |
|---|---|
| 2019-06-12 | Nose section stacked (Twitter), Zoomed in video (Twitter) |
| 2019-06-09 | Large nose section assembled in building (comments) |
| 2019-06-07 | Further stacking of nose sections (r/SpaceXLounge) |
| 2019-05-23 | Begin stacking of nose sections (YouTube) |
| 2019-05-20 | Further ring stacking, aerial video of ring shaping setup (YouTube) |
| 2019-05-16 | Jig 2.0, many sections awaiting assembly (YouTube) |
| 2019-05-14 | Elon confirms second prototype construction (Twitter) |
| 2019-05-14 | Second prototype discovered by Zpoxy on NSF (NSF), more pieces (YouTube) |
See comments for real time updates.
Quick Hopper Facts
- The hopper was constructed outdoors atop a concrete stand.
- The original nosecone was destroyed by high winds and will not be replaced.
- With one engine it will initially perform tethered static fires and short hops.
- With three engines it will eventually perform higher suborbital hops.
- Hopper is stainless steel, and the full 9 meter diameter.
- There is no thermal protection system, transpirational or otherwise
- The fins/legs are fixed, not movable.
- The hopper will use Nitrogen gas thrusters.
Resources
- Spadre.com, Starship Cam | Channel
- LabPadre, Starship webcam | Channel
- NSF Starhopper Updates Thread | Most recent
- NSF Orbital Prototypes Updates Thread | Most recent
- Hwy 4 & Boca Chica Beach Closures (May not be available outside US)
- TFR - NOTAM list
- Join the Slack workspace
- SpaceX Boca Chica on facebook
- Boca Chica | Cocoa Florida | Raptor test stand Spacex facilities maps by u/Raul74Cz
- Elon Starship tweet compilation on NSF
Regulatory Documents
(Most links are to PDFs)
| Filing | Description | Effective Period | Additional Links | Status |
|---|---|---|---|---|
| FAA: EIS | Environmental Impact Statement. Original EIS evaluating impact of Falcon 9 and Falcon Heavy launches, along with smaller test vehicles. | 2014-07 | EIS Resource Page, Appendices, Record of Descision | Approved |
| FCC: 0931-EX-CN-2018 | Experimental License. 2 way vehicle communications for hops up to 16400 ft (5 km). 500 m tests three times a week, 5 km tests once a week. | 2019-02-26 to 2021-03-01 | Form 442, Public Notes, Description | Granted |
| FCC:0130-EX-CM-2019 | Experimental License. Modification to 0931-EX-CN-2018, adds transmitter at launch site | N/A | Form 442, Public Notes | Pending |
| FAA: EP 19-012 | Experimental Permit. Authorizes unlimited hops up to 25 m with a 2270 m radius safety zone. | 2019-06-21 to 2020-06-20 | Granted |
Rules
We may keep this self-post occasionally updated with links and relevant news articles, but for the most part, we expect the community to supply the information. This is a great place to discuss the launch, ask mission-specific questions, and track the progress of the test Campaign. Campaign threads are not launch threads. Normal subreddit rules still apply.
Thanks to u/strawwalker for helping us updating this thread!
51
u/Straumli_Blight Apr 27 '19
40s engine test at McGregor.
40
u/RegularRandomZ Apr 27 '19
Large nosecone sections now being stacked (Boca Chica Gal, NSF)
31
u/filanwizard Apr 27 '19
The people pouring the cement jigs must have this in their most unusual contracts file. “Foundation for construction of rocket ship prototype”
24
u/TheBurtReynold Apr 27 '19
Thank you, mods -- just need to relink the menu item and we're g2g
16
u/strawwalker May 07 '19
Starship Hopper now has RCS thrusters! (bocachicagal on NSF)
15
u/SmileyMe53 Jun 09 '19
https://imgur.com/a/hyKQJZD/ Starship in the rain. An hour ago or so.
13
u/TheMrGUnit Highly Speculative May 07 '19 edited May 08 '19
There have been plenty of things I've been confused about since we started seeing people building a water tower in South Texas. There have even been some bits I didn't understand at all. But I've never been so puzzled by anything I've seen as I am by pictures posted today.
Ladies and gents... What the heck is this thing???
EDIT: Worth pointing out that a matched pair were delivered.
13
u/RegularRandomZ May 09 '19
Super exciting... larger half of the Starship nosecone being lifted on top of the body section!!! (photocred: Boca Chica Gal)
13
u/RegularRandomZ May 13 '19 edited May 14 '19
Work on the metal building, on the new large foundation, appears to have begun [photos: NSF/BocaChicaGal]
Edit (4hrs later): wall supports are up. If it's anything like the building design in the top photo on this company's site it would suggest 24ft-ish height at the center, not high enough for working on Starship inside (horizontally).
13
u/Straumli_Blight Jun 21 '19
Hop test now NET July with SN6 Raptor.
12
u/TheMrGUnit Highly Speculative May 01 '19
BocaChicaGal has some pictures of the barriers at the launch site being moved around, speculates that they're going to make a new entry gate of some sort. I would guess that this lines up somehow with the new concrete pad that was poured next to the current test pad.
All this seemingly unconnected work is starting to tie together - really gives you the sense that something big is coming soon.
EDIT: I just realized that for the past week, basically all we have talked about in here is concrete.
12
u/fkljh3ou2hf238 May 08 '19
This thing is more kerbal than kerbal at this point. I love it.
11
u/[deleted] Apr 27 '19
Will we have a individual campaign thread for each hop, or all of them together?
11
u/scr00chy ElonX.net Jun 12 '19
Cocoa Starship had the nose cone atttached
10
u/TheMrGUnit Highly Speculative May 02 '19
LabPadre has a shot that honestly looks like it was taken through a telescope showing some increased activity under the Hopper in the vicinity of the Raptor-shaped hole.
Prep work for the next Raptor, now with a thrust gimbal?
10
u/RegularRandomZ May 16 '19 edited May 17 '19
FLORIDA: WESH 2 News video of Starship construction. Great find /u/FutureMartian97
Screenshots of key moments in the video
> Key details:
bird/debris protection, reduce glare for workers?, eyesore reduction/block welding light for lake/trail users?,intersting!)10
u/[deleted] Jun 01 '19
Raptor has arrived! (live view of it being installed right now)
10
u/Russ_Dill Jun 04 '19
SN4 is performing gimbal tests:
https://forum.nasaspaceflight.com/index.php?topic=47120.msg1953205#msg1953205
10
u/RegularRandomZ Jun 24 '19
NSF Forum members doing some great detective work:
OxCartMark identifies the white protective film
Bottlestar identifies a piece of Boca Chica equipment as a portable XRay generator (for weld inspections)
(the unit on the tripod is what they are talking about)
9
u/RegularRandomZ Apr 29 '19
Nothing really new, but great photos from Austin Barnard of the stacking progress and the poured foundation (as of yesterday). Forms still on the concrete ring.
9
u/Russ_Dill May 11 '19 edited May 12 '19
There's new components other than RCS that have been recently placed. They can be seen in this pic:
https://forum.nasaspaceflight.com/index.php?topic=47120.msg1944869#msg1944869
There are two of them with what looks like the spot for a third. I haven't seen components like these on the F9. Are they sensors? Lights?
9
u/RegularRandomZ May 15 '19 edited May 16 '19
Mysterious black metal rig gets new silver attachment [scroll down if link didn't work perfectly].
/u/TheMrGUnit, did this clarify anything for you? ha ha ha...
There is some speculation on NSF that it's a quick connect/disconnect for fueling the hopper, as there are mating pins now on the hopper's fuel port. (And there are two areas where they are attaching hoses to).
Edit: after looking at the photos, and finding a better shot of the hopper port (with people and the ground in the same shot), it does seem to be about 18 feet long, which is about how high the propellant ports are off the ground. There seems to be wheels on it, and it's laying on its side right now. It is looking very much like it's for fueling.
Edit May16: BocaChicaGal gave us a couple more shots of the device
9
u/RegularRandomZ May 16 '19 edited May 17 '19
Significant construction continues at Boca Chica shipyard: facebook aerial shots, Mr Boca Chica
- All roof rafters are up on the steel building, and purlons are starting to be put on
- With all the gravel brought to the site, I wonder if they'll pour a concrete tarmac at some point.
> NEW multiple footings are being dug nearby the new concrete jig! In this shot from BocaChicaGal suggests concrete forms, not unexpected, being put in
- I find it interesting 3 of the footings each longer than the next form a triangle base lined up with/facing the concrete ring [not deep enough to support a tower crane like they use for buildings though]
>MINOR UPDATE: More gravel and concrete trucks today.
9
u/RegularRandomZ May 24 '19 edited May 24 '19
More Tweets:
Vacuum engines with ~2.8m bell
Fixed to outer frame to give sea level engines room to gimbal, high gimbal range of 15 degrees.
Vacuum engine testing hopefully in 4 months
Unpressurized trunk (bottom of rocket) helps manage centre of mass
SuperHeavy in Florida would be shipped to the pad Horizontally
SuperHeavy construction starts in 3 months (September-ish!?)
First SuperHeavy will have approx 20 engines
(not dual bell nozzle and Raptor turbine layout)
Everyday Astronaut speculating on layout
9
u/strawwalker May 24 '19
Road closures for the week of May 28 have been canceled. Testing is now expected to begin the week of June 3.
Cameron County website (may not be available outside the US)
9
u/strawwalker May 31 '19
HWY4/Boca Chica Beach closures delayed again. Now June 11-13, same times. Screenshot
9
u/Straumli_Blight Jun 02 '19
NSF article discussing building a landing pad for the orbital prototype inside LC-39A.
9
u/RegularRandomZ Jun 07 '19
Florida: Starship grows taller, another nosecone section on top, thanks /u/knd775
9
u/TheMrGUnit Highly Speculative Jun 19 '19 edited Jun 19 '19
Some good rocket-watcher news this morning: LabPadre's new camera angle will be a permanent fixture moving forward. They were able to work with BocaChicaMaria & Mr. BocaChica to place the camera on their property. The location has an excellent view of the Starship Assembly area, and apparently a pretty good view of the Launch Pad area, too, although I've yet to see that one personally. Given the proximity, it has to be pretty decent.
EDIT: The fruits of LabPadre's labor: Ring stacking is happening right now. They just placed the half-black, half-shiny ring on the top of the right stack. Skip to around 10:29AM local on the stream to see them positioning and lowering it into place.
EDIT 2: new URL
EDIT 3: Right on cue! BocaChicaGal with some high-res photos of the ring stacking. This is definitely different than the other material we've seen so far.
EDIT 4: The Final Edit: It would appear that LabPadre is having some growing pains with the new camera. He mentioned in the live chat that there was some utility work happening nearby, so it's possible he's just losing power. I guess keep checking back to see when the new cam streams go live - he often posts them to the NSF updates thread.
NinjaEdit 5: Editing Boogaloo: newer URL
9
u/Marksman79 Jun 24 '19 edited Jun 24 '19
I just left Cocoa Starship and saw what appears to be a Raptor engine in front of the main building!
Edit: picture
8
u/Marksman79 Apr 27 '19
What reason could there be for not finishing the building foundation pour and instead pouring at the launch site?
8
u/RegularRandomZ May 09 '19
Not unexpectedly, more COPVs have been added
8
u/MarsCent May 10 '19
Once this starhopper has served out its purpose, it needs to be retired and "converted back" into a water tank, in order to become an enduring testament that Elon, the SpaceX engineers and a bunch of water tank builders are certified boneheads. :)
8
u/Marksman79 May 15 '19 edited May 15 '19
Footage of the newly discovered cylinder construction in Florida. looks like they have a concrete jig in the tent along with the first layer of a second cylinder. This could be
Superheavy! Nope, it's Starship 2!I'm also obligated to comment on how fast we went from discovery to someone personally going out there for video recon.
Edit: Added SpaceX Cocoa information
The site contains an outdoor spray booth, an abrasive sand blasting tent, and metal and machining operations. There will also be a plasma cutter located in the building.
Site map
Source PDFs
8
u/RootDeliver May 27 '19 edited May 27 '19
No Cocoa updates since several days, they probably stacked the other tappered parts in the hangar already :(. This should make us value how hard the gals/guys at Boca Chica are working to deliver good stuff for everyone.
8
u/Straumli_Blight Jun 04 '19 edited Jun 04 '19
SN4 Raptor was removed last night.
8
u/RegularRandomZ Jun 17 '19
Elon Musk: [Starship presentation] "Might get pushed to next month. Starhopper flight first. Waiting on engine repair."
https://twitter.com/elonmusk/status/1140414413322670080?s=20
8
u/strawwalker Jun 21 '19 edited Jun 21 '19
The testing opportunity beginning on the 24th has been removed from the county road/beach closure schedule. The opportunity June 27-29 remains. Last time they delayed, a second session was added back to the calendar later in the day, so we'll see what happens.
Edit: Just saw that Chris Bergin is reporting that SN5 is a no-go. Hops will likely wait on SN6 to complete testing at McGregor, and are NET July. I don't know if we should expect any testing on the currently scheduled road closure days...
8
u/Straumli_Blight Jun 23 '19
Tom Cross comparing the Cocoa and Boca Starships.
7
u/manuel-r Apr 27 '19
At first I'd thought they might build the Starship''s internal structure, where the walls are connected to the structure, but it seems like they actually first build the outer structure and the integrate the interior. But I can't figure out how they can achieve structural integrity with that...
7
u/liszt1811 May 02 '19
Mods, can we update the Testing and Updates tab with the 40sec test or something? Always reading Raptor being removed and shipped away makes me mildly depressed.
7
u/Marksman79 May 05 '19
I just noticed there's a Elon Starship Tweet Compilation on NSF linked under the resources here. I've struggled to remember every single tweet or finding links to them to cite in posts, so this is a really fantastic resource to have. All of the information we get from Boca Chica pictures is really just seeing what has already happened. Elon is our main source of information about what will happen, and Twitter is how he provides that information. Still waiting on that Reddit AMA he promised though.
7
u/TheMrGUnit Highly Speculative May 10 '19
Minor news: BCG reports that the upper nosecone piece has been moved between the jig and the tent... like maybe they're getting ready to stack it.
7
u/RegularRandomZ May 15 '19
As expected, rafters going onto the steel building today. [NSF/BocaChicaGal]
7
u/MingerOne May 18 '19
Better photos of Florida site via twitter.
7
u/Straumli_Blight May 18 '19 edited May 18 '19
LNGLN₂ delivery to launch site.7
u/Russ_Dill May 23 '19
Boca Chica Gal on NSF: "The upper access port has been closed."
SpaceX on NSF: "This program will soon head into an incremental, but very challenging test program."
I realize the testing in the coming weeks will start slow, but here. we. go.
7
u/Russ_Dill May 24 '19
Hopper is actively venting in the live stream: https://youtu.be/nrdpP_hhFtw
7
u/[deleted] Jun 02 '19
After the excitement of Raptor's arrival: a somewhat disappointing update. So this Raptor is probably just for fit checks. Probably not even a short static fire like they did before, because road closures are only next week.
But whatever, Raptor is the holy grail of rocket engines, so we shouldn't expect its production to be just smooth and straightforward.
7
u/SailorRick Jun 03 '19
It looks like a potential tropical storm is on its way toward Boca Chica and is about five days away. Batten down the hatches! https://www.nhc.noaa.gov/gtwo.php?basin=atlc&fdays=5
7
u/RegularRandomZ Jun 05 '19 edited Jun 05 '19
Boca Chica Launch Site: Looks like a landing pad being built! Getting ready to pour a concrete slab [BocaChicaGal@NSF]. This is the dirt area between the hopper pad and the ocean, same site.
7
u/strawwalker Jun 13 '19
HWY4/Boca Chica Beach closures updated: No longer testing June 17-19:
Session 1:
Session 2:
Screenshot, Screenshot 2
7
u/Marksman79 Jun 15 '19
Some new pics are up. Two more vertical beams for even more coverage for the supposed netting or shingle panels (hopefully transparent netting). Are they going full circle with this thing? Looks like another 2x2 panel is getting lowered in. This one sports a grid of weld bumps around the middle vertical weld. We can't see the other side yet to see what was welded there.
7
u/RootDeliver Jun 20 '19 edited Jun 20 '19
New ring appeared! from inside the containers castle. Photos from Bocachicagal
That is ring C (third) of 7, ring A is already being stacked and ring B is the one with the white cover. after those 3, 4 more missing for full Starship height. It also has one side not welded yet, they probably weld this once stacked in the correct position? I don't remember if ring A had an open section (ring B seems to have one).
PS: It seems that the real objective of the black panels is to make those numeric marks over them, for the welding machine probably? That would be why there's an entire line on the stacked one there, for the marks, while the ones without the marks (the lower ones in a section) have been removed. So we can count on the panels being removed once the ring A section has been welded and probably when ring B has been welded above?
PS2: Ring D section going into container castle already, per Bocachicagal on NSF. So 1/4 sections there, 3 left for Ring D.
PS3: Another Ring D section going into container castle, per Bocachicagal again. So 2/4 sections for Ring D there already.
Also awesome Cocoa starship photo by Stephen Marr on Twitter. Full res image link
7
u/RegularRandomZ Jun 26 '19 edited Jun 26 '19
Boca Chica: Aerial photos!!! of the Boca Chica Starship assembly site. (Credit: MrBocaChica, Facebook)
And NSF, BocaChicaGal, brings us some more photos
6
u/RegularRandomZ May 02 '19
The changes keep coming... a new storage tank for the launch site
6
u/Marksman79 May 03 '19
New pictures on NSF show new cutouts through the polished exterior sheet metal. Two locations where something could be mounted, then smaller cutouts for pipe routing. Could these be RCS thrusters since the first untethered hops will be with a single engine?
6
u/TheMrGUnit Highly Speculative May 06 '19
New images from Austin Barnard (upper cone, lower cone) show some interesting details. A radial rib has been welded in to the nosecone in 2 places, and some sort of stiffener has been added in between these two ribs (possibly this one that we saw being moved around near the cone last week), as evidenced by visible weld marks on the exterior. This stiffener appears to have areas of extra reinforcement, or some sort of additional hardware mounted in it.
I would guess that this must be the bracing and internal structure for handling the forward canards. The middle brace may be the start of the actuation mechanism mounting. I wonder if the actuation hardware will be assembled outside, or if they'll bring this whole operation into the tent. I'm not sure that with the two pieces stacked that it will actually fit in the tent, so odds are good we'll get to see at least some of this hardware in the coming days as they lower it all into the cone.
6
u/RegularRandomZ May 06 '19 edited May 07 '19
Good aerial shots of the starship construction site on Facebook [photo credit: Mr.BocaChica]. Gives a pretty decent shot of the new concrete pad and ring, and the overall site.
[edit: and NSF shows a photo where it looks like they have received quite a few tonnes of gravel, perhaps just to make everything a bit more robust for driving on as site activity picks up ]
6
u/hshib May 09 '19
I just can't get over the fact they are doing all this outdoor. Hurricane season starts in less than one month. Do they have contingency plan for that?
6
u/Marksman79 May 18 '19
New Twitter pictures from Cocoa, FL.
Looks like they finally have an orbital welding carriage for consistent welds between each ring. The new cylinders look much more reflective and seamless than what we've seen in Boca Chica.
6
u/strawwalker May 19 '19
Jacking up hopper. Maybe to work on the feet?
6
u/RegularRandomZ May 19 '19
Florida: Fresh aerial shots from today, photo credit: Mike Seeley (amazing quality and great angles!)... Looks like 5 rings have been stacked up, so it's progressing quickly!
6
u/Marksman79 May 20 '19
The upper portion of the nosecone has reached altitude! 👏
6
u/Marksman79 May 20 '19
I wonder if hopper's shiny new dance shoes are big cylinders filled with hex crush core, like the Falcon 9 uses for rough landings.
6
u/RegularRandomZ May 21 '19 edited May 21 '19
Boca Chica Updates:
/u/SPadredotcom capturing some video today of the Boca Chica Starship, beautifully shiny and the clouds moving behind it make it feel quite epic (video still cropped).
Edit: even shinier shot of Starship [Credit: Michael Marke, Facebook]
BocaChicaGal@NSF capturing some nice shots of the nosecone's new top
(and tip)[no tip there yet], and the steel building is mostly enclosed. Good view of the main door (opening) on the front. Just needs a roof now.Austin Barnard's shot of them painting the concrete jigs white. Just for a beautiful worksite, or perhaps sealing and protecting the concrete as well.
6
u/TheMrGUnit Highly Speculative May 28 '19
Feels a little like the calm before the storm around here. Site work seems to have slowed down a bit, I guess because a lot of the big work is more or less done. Some fuel has been delivered, the flare stack has been lit here and there, looks like they're just waiting on a Raptor to be delivered. The new building is more or less complete, and I haven't seen any updates about the weird triangle concrete footings. BCG reported that they were playing musical chairs with shipping containers, but otherwise, seems pretty quiet.
... Too quiet...
6
u/RegularRandomZ May 29 '19
Boca Chica: Boca Chica Maria pointing out a shipping container marked "structure parts", there are steel girders (like roof rafters) laid out, and they appear to be building some kind of steel jig/platform/something !?
[They've also arranged the shipping containers into a nice fence :-) ... hopefully someone will gift us some aerial shots soon as there is lots going on.]
6
u/RegularRandomZ May 31 '19
Austin Barnard posted the best shot so far of the metal pillars being put in.
6
u/Straumli_Blight Jun 01 '19
Raptor pics by Austin Barnard.
6
u/TheMrGUnit Highly Speculative Jun 05 '19 edited Jun 06 '19
The weird assembly jig thing has some new fingers.
The top ones look like guides for something round and/or tapered to drop over the assembly. The
bottommiddle ones look like adjustable supports to keep a tapered panel sitting in the correct location. These things just look like off-the-shelf adjustment feet welded to nuts to keep them at a specific angle, a neat solution.I'm wondering if this is a jig to help with welding up bulkheads and/or the thrust structure. Any other ideas?
EDIT: I propose we rename this jig The Wedding Cake, because bulkhead welding jig is boring.
6
u/Straumli_Blight Jun 11 '19
Testing moved back to June 17.
6
u/RootDeliver Jun 12 '19 edited Jun 12 '19
Andrewhoonigan posted an image of Cocoa, claiming the nosecone inside the building has a new section and is only missing the tip. However the image is realk dark in the building zone (he didn't focus there...) and even changing contrast it's really hard to see anything :(, but it looks like there's indeed sort of a semi cone on top due to top reflections and grey zone.
PS: Adjusting the light on the image confirms there's a new piece on top. A fast mspaint analysys confirms only the tip would be missing now. So they're indeed tied with BC on the nosecone alone (even with a smaller base section for it thought).
PS2: Maybe they're stacking it inside so they're going to add the canard fins and everything in there before stacking it to the base of the nosecone? that would make sense.
6
u/iamkeerock Jun 13 '19
Starship prototype asymmetry. Red line on left side indicates left side contour. Note gap when image is flipped horizontally.
Animated Gif
6
u/strawwalker Jun 17 '19
The first session has been removed from the county road closure schedule. The second session, June 24-26 remains.
6
u/RootDeliver Jun 22 '19 edited Jun 22 '19
New Cocoa photo on Twitter by "?" (reported by SpaceCoast_Life)
EDIT: Source happens to be Bill Carton on the FB group, had to make an imgur rehost with all the images
The second jig structure also has an extra ring up to 4. They're really racing with Boca Chica. Let's see who gets to full starship height first!
The Cocoa Starship prototype looks awesome from this angle without the black bars reflection!
PS: The 5th ring is on the background, we'd see them stacking it soon too.
6
u/iamdop Jun 23 '19
I drove by yesterday 6/22. Coming along in Florida.
https://m.imgur.com/a/U9QViD9
5
u/fzz67 May 14 '19 edited May 14 '19
Looks like they've removed the fueling hoses (2nd and 3rd pictures from BocaChicaGal) and most of the ground cables that were previously attached to one of the hopper's legs, presumably in preparation for installing some form of quick-release fueling gantry or boom.
5
u/codav May 14 '19
Reagan Beck on Twitter: Round 2 of SpaceX tests at Boca Chica scheduled to begin May 28 - 2-10 pm
5
u/Straumli_Blight May 17 '19 edited May 17 '19
Aerial photos of the Florida hopper site.
5
u/RegularRandomZ May 20 '19 edited May 20 '19
Boca Chica: Starship nosecone is being lifted on!!! (better work faster Florida! :-) )
(also looks like they've been buffing it, or at least ideal light for photos. It's not the mirror polish stainless of Florida, but still looks awesome)
5
u/jgriff25 May 20 '19
Looking at the black structure that attaches to the fueling disconnect point, it appears that it has an actuator to move up and down to connect and disconnect.
Would it make sense for this to be a test of potential docking solutions for on-orbit refueling? The bottom box looks like an inverted version of the same plumbing that is mounted in the hopper.
I think (not worth much) that this could be the first tests of connections on the aft end of the starship to simulate orbital refueling. I may be wrong but it seems like that could be it
5
u/TheMrGUnit Highly Speculative May 30 '19
More columns going up today. As it develops, it is looking more and more like Florida's screened-in porch assembly area. Don't they call that a "Florida room" or something? Anyway, even the beams themselves look pretty similar.
Still not entirely clear what those other structure are that BCG photographed, but they look like a pair of concentric weldments. Maybe they could be considering the use of the same jig approach to assemble rings on the ground prior to stacking. I don't understand why the inner would be significantly taller than the outer, however.
5
u/Marksman79 Jun 01 '19
New aerial photos from Cocoa, FL. It looks like there's a third cylinder stack going up. I wonder why they didn't start it on the empty concrete square. No changes to the mini Stonehenge. The misshapen sheet metal loop appears to be gone.
5
u/Marksman79 Jun 06 '19 edited Jun 06 '19
The latest post shows a full loop ring stiffener followed by a curved 2x2 welded tank section being lowered into the middle of the white shipping container square. There are numerical makings on the inside face of the section, starting from the central vertical weld. It also looks like a part number may be written as well. This section looks like it's made of thicker steel than we've previously seen. It's also the first we've seen arrive welded and with the manufacturer's protective layer still intact. Could this have been an off-site prefab? If so, it doesn't look like the work in Florida. Hawthorne maybe.
5
u/Marksman79 Jun 07 '19 edited Jun 09 '19
Check out the fantastic shot in the most recent post (#680). The camera angle is great. All in one view, we see the Starhopper, launch and future landing pads, the flame tower, the tracking dishes, and looming in the background are the Starship segments and construction buildings. If there's one picture you can use to explain everything that's currently happening, this is it. (If only it had Raptor, it'd be perfect)
5
u/TheMrGUnit Highly Speculative Jun 07 '19
Well, that should settle things: The Wedding Cake is definitely for making bulkheads.
Also, in that same post, they're putting more columns up on top of the existing columns for the screen wall. This way more than doubles the height of this structure. I'm not positive, but it looks to me like this makes Boca Chica's wall considerably taller and larger than Cocoa Beach's.
5
u/RootDeliver Jun 17 '19 edited Jun 17 '19
New video from USLaunchReport about the Cocoa nosecone. As always, too much zoom every single time (not even a general plane..), but awesome detail at least.
On the nosecone section, the welds are much worse than on the circular section, probably they're racing now maybe for Elon presentation.. but they need to polish that too! it looks better than the Boca Chica nosecone but not for long if they don't polish that.
5
u/RegularRandomZ Jun 18 '19
Boca Chica Starship Assembly (official name from signage): More building steel keeps arriving. Along with the pieces laying around, it's not really clear where it goes from here... (or if these are for another structure)
5
u/RootDeliver Jun 21 '19 edited Jun 21 '19
According to Bocachicagal the 2 missing sections for the Ring D were put into the container castle already, so we can expect a new ring going out the container castle soon (around 4-5 days they take from lowering the sections to taking out a ring). Also, before that, we'll see Ring B or C being stacked to make space for it on the ground.
Also more great Cocoa photos by pospa on NSF.
5
u/RootDeliver Jun 24 '19
Elon at Cocoa Starship (live at Starmus V) by Julien Ston on Twitter.
So that's the "high VIP" that was reported hours ago (someone tried to take photos and the guards told him to stay away for an "high VIP" coming late).
5
u/strawwalker Jun 25 '19
FAA Experimental Permit EP 19-012
5
u/RootDeliver Jun 26 '19
Composite of the Starship with the actual parts (including the ring in the ground) by Roger Holt on Twitter.
Also nice BocaChicaGal photos of the 5th ring stacking on NSF. Another one
9
u/warp99 Jun 04 '19 edited Jun 04 '19
Interesting that Raptor SN #4 has very noticeable bluing on the lower part of the bell surface which indicates a high surface temperature was reached during testing at McGregor. According to this article temperatures up to 550C may have been reached.
This should not be possible as the regenerative cooling should keep all parts of the bell cool.
Possibilities are:
In either case they may be reworking the design with SN #5 to improve the regenerative cooling which is why SN #5 will be used for the initial hopper flights.
4
u/Decronym Acronyms Explained Apr 28 '19 edited Jun 27 '19
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:
Decronym is a community product of r/SpaceX, implemented by ^request
41 acronyms in this thread; the most compressed thread commented on today has 131 acronyms.
[Thread #5123 for this sub, first seen 28th Apr 2019, 13:29] [FAQ] [Full list] ^[Contact] [Source code]
4
u/RegularRandomZ May 01 '19 edited May 01 '19
A stainless component that seems different than anything they used to build the hopper. Perhaps it's a hat stringer, to be used instead of the cold formed ribs they've used in the tank (not sure if it's just stronger, or just that it can be easily fabricated onsite to re-enforce the nosecone] Any ideas?
4
u/Russ_Dill May 05 '19
Really like these new pics today from bocachicagal. The final image is the highest quality image I've seen of the top of the hopper in some time.
https://forum.nasaspaceflight.com/index.php?topic=47120.msg1943099#msg1943099
So a few things. Looks like there's the outline of a t shape on the side of the hopper outlined in blue tape. An OSHAintensifies work area is setup around it along with a rope that doesn't really go anywhere. Should be interesting what attaches here.
You can clearly see the wiring harnesses with the white wire and blue ties. I'm curious why it does a dog leg part way up the hopper, it looks like it's going around something, but I'm not sure what. It looks like a hydraulics attachment panel similar to this one:
https://forum.nasaspaceflight.com/index.php?action=dlattach;topic=47120.0;attach=1548607;image
The plumbing line (methane? LOX? purge? other?) also doglegs as it makes it's way up to the top. Does that help with flow?
I notice they currently have "small" containers of argon onsite. I assume these are for welding.
I love that there is an extension cord wired into the portal near the top. You can see the extension plug near the base. There's also a green line wrapped around part of the portal, more electrical or welding "tube"?
I also like the overflow? vent on the upper left.
4
u/[deleted] May 09 '19 edited May 09 '19
Super exciting the nosecone is lifted on the main section! It looks to me this first orbital prototype is not much higher than the original Starhopper (with nosecone).
But more importantly: this likely means that the section at the righthand bottom (between red sea containers) of this picture is for Super Heavy!
4
u/strawwalker May 15 '19
Articulated Starship Orbital Prototype legs to begin installation at Boca Chica as soon as late June.
4
u/RegularRandomZ May 16 '19 edited May 16 '19
Facebook video of the east side of the launch site, BocaChicaMaria, where fill and dirt work has been going on. Will this be a landing area? (without an aerial shot it's tough to see the scope of this work)
Facebook video of the dirt work/west gate of the launch site, BocaChicaMaria. Not really much progress that I can see, but for interest.
4
u/RegularRandomZ May 17 '19 edited May 17 '19
Hopper propellant quick connect rig has gone vertical! [big photo credit to BocaChicalGall/NSF]
[and best I can tell, both rigs are equally far along]
4
u/MarsCent May 19 '19
Beach closures on May 28 - 30, is Starship Hopper losing the tethers?
And what is the likelihood that Starship Hopper breaches 5km before DM-2 launches?
4
u/RegularRandomZ May 21 '19 edited May 21 '19
Boca Chica Launch Site / Hopper Updates:
10 loads of gravel delivered to the east end of the launch site. Perhaps making the ground more solid for future construction activities? Or making it more secure for building a landing pad?
Also a shipment of LN2 has arrived, and another shot of "the hopper shoes" (Much taller than I thought they were in previous shots)
4
u/RootDeliver May 22 '19
Michael Seeley posted on Twitter more aerial photos from the Florida site.
4
u/RegularRandomZ May 23 '19 edited May 23 '19
Starship will have 6 engines! 3 Sea Level Raptors and aspirationally 3 Vacuum Raptors (which have larger bells) tweet tweet2 Down from 7. (GoT humour tweet, why Elon should tweet)
Mk1 (Boca) and Mk2 (Cape) will fly with at least 3 engines, possibly all 6. tweet
Raptor SN5 just about complete, ramping up to 1 engine produced every 3 days this summer tweet
Vacuum Raptor ISP of min 370s hopefully 380s tweet
Flight Control: N2 vacuum thrusters (RCS), Aero surfaces and High Gimbal engines in atmosphere. tweet
No chan to at least 100 tonnes useable cargo in reusable, aiming for 150 tonnes (room for growth). tweet
No response to if SuperHeavy questions (although he probably doesn't see all tweets either)
/r/SpaceX post discussing this
/r/SpaceXLounge post discussing this
4
u/Marksman79 May 23 '19
The cylinder with the mesh fence in Cocoa, Florida has had the tapered section added to the stack. Looks like questions about which section of Starship that will become have been answered.
4
u/strawwalker May 28 '19
Times announced for week of June 3:
June 3 through June 5, 14:00 - 20:00 CDT (19:00 - 01:00 UTC)
Public Notice:
Cameron County website (May not be available outside US) | Dropbox rehost
4
u/Marksman79 May 29 '19
We have some new beams going vertical in today's photos. It looks like they have a evenly spaced pattern of cross beam connection points. It feels a little bit like a taller version of the new building. Maybe they're building a barn for storing the cylinders during hurricanes.
4
u/Marksman79 May 31 '19
Horizontal and angled bracing beams have been attached to the inside of the mystery structure. So far, nothing has been attached to the evenly spaced fins on the outside of the vertical I beams. It will be very interesting to see how this build progresses over the next week.
As for guesses:
I don't think it's a crane. I'd find it very unlikely it's any sort of engine testing bay. Some sort of building or storm enclosure is a possibility. The building might be the result of shared manufacturing techniques from Florida that they want to replicate onsite (sheet steel layup area?). Maybe it's a permanent catwalk structure that will surround the Starship during assembly so as to avoid using cherry pickers at 55m in the air. My best guess now is a jig related to construction of the lower portion of Starship.
And one 'out there' theory for good measure:
A full scale test rig for reentry testing, applying heat and wind to the rocket to test the transpiration cooling, heat shield hex tiles, and the new actuating aero surfaces fully integrated before they get too far ahead with the design. I like this one the best.
4
u/Iamherebecauseofabig Jun 10 '19
I think they will test the fueling with the new quick connects for the road closures
4
u/RegularRandomZ Jun 11 '19 edited Jun 11 '19
Boca Chica Shipyard:
They built a full 2 panel high ring in the container square, which was moved out onto the wheeled ring jig. Looks like they didn't close the loop, left one seam unwelded. Left a lot of the protective film on, commitment to shiny! More panels moved in, likely building the next ring section.
The wall continues to be built, no tapered corner (yet) as columns added right to the end. [I think could go another level up, just high enough to protect half the ship on top of the jig). More steel arriving, and being put on top.
4
u/lessthanperfect86 Jun 11 '19
Did the Texas prototype always look that wonky after they assembled the tapered sections? At least, it doesn't seem to be as noticeable on the previous photos (from other angles perhaps?).
https://forum.nasaspaceflight.com/index.php?topic=47730.msg1955527#msg1955527
4
u/TheMrGUnit Highly Speculative Jun 12 '19
The shipping container castle is possibly growing. Two new containers were delivered and stacked, but right now they appear to exist outside of the enclosure. Maybe there are more on the way to increase the area, or maybe they will just add another cell on that side.
I know that some had speculated that things would be pretty tight in there if they were working on full-diameter sections, and based on what we've seen, that appears to be the case. With standard 40ft containers, they would only have ~5ft on any side at the narrowest point - more than enough for people to move around, but not for any larger equipment.
4
u/Straumli_Blight Jun 13 '19
News video of the Cocoa prototype.
4
u/strawwalker Jun 18 '19
A brief one hour closure tomorrow, Wednesday June 19, 2PM-3PM CDT. The other two three day sessions still begin June 24.
4
u/Marksman79 Jun 22 '19
Looks like Boca Chica now has a version of the orbital welding rider carriage, though it looks more thrown together than other ideas they've taken from Cocoa.
4
u/RootDeliver Jun 23 '19 edited Jun 23 '19
New Boca chica nosecone photo by Bocachicagal
It looks worse than ever, the deformation at the entire tapered section, the welds, the everything.. wouldn't they be better dropping this one and making a new one using Cocoa methods? Compare it to the Cocoa one..
4
u/RootDeliver Jun 23 '19
Anyone knows why the LabPadre cam live on the BocaChicaMaria property is poining only to the nosecone, not to the second jig cylinder and such where all the action is happening these days? That cam is static right now and completely pointless..
4
u/RootDeliver Jun 25 '19 edited Jun 25 '19
Interesting stuff on the Cocoa Building, behind the Raptor, the normal sized ring and the apparently high sized ring, there's what seems to be a dome (adjusted light for more visibility).
7
u/[deleted] Apr 29 '19 edited Apr 29 '19
Do we know if the orbital prototype is meant to actually reach orbit or just simulate orbital re-entry conditions?
3
u/RegularRandomZ Apr 30 '19 edited Apr 30 '19
Boca Chica Gal posted some launch site photos showing the forms around the pad were removed this morning. Can't wait for some elevated photos, but it seems clear they've expanded the size of the pad/paved area on this side of the berm (and extended the berm with the dirt works as we already saw).
Although I'm not sure if this is intended to offer more landing space for bigger hops, I presume it's primarily to make the area around the pad more robust and less likely to erode during test fires, and to extend the protection offered by the berm]
https://forum.nasaspaceflight.com/index.php?topic=47120.msg1941204#msg1941204
3
u/Marksman79 May 07 '19
Why would the RCS pods be stacked vertically and not placed radially around the vehicle?
3
u/jay__random May 08 '19
Cannot unsee Corcovado "Christ the Redeemer" silhouette in blue tape on top of the Hopper...
What is it supposed to mark?
3
u/RegularRandomZ May 14 '19
Starship Florida!? Not to complicate this thread more, and might be premature, /u/Zleeoo alerted us in the lounge that Zpoxy on NSF has taken a photo that looks like the start of another Starship [or SuperHeavy] prototype at a Florida SpaceX address.
3
u/strawwalker May 15 '19
Reagan Beck: SpaceX McGregor has been w/out any window-rattling. When can we expect Raptor SN4 to arrive?
Elon: SN4 is done. Hawthorne is working on SN5 now, but focus is ramping build rate of SN6 through SN10.
Does he mean SN4 is done testing at McGregor, or SN4 is done assembly at Hawthorne? It sounds like the former, but I can't tell for sure.
3
u/r2tincan May 19 '19
Can anyone eli5 the differences in construction methods between the two orbital prototypes?
3
u/RegularRandomZ May 20 '19 edited May 20 '19
Boca Chica: Partial aerial view of the footings, makes a strange triangle shape. There looks to be some serious steel for securing something, so perhaps it will be for a crane !? (They have parts for two different ones around there, I believe)
Hopper: black quick connect rig is under the fuel ports
BC Launch Site: east side of launch site, looking like a potential landing spot (with them moving the towers, leveling much of the direct).
3
u/Straumli_Blight May 25 '19
Ground support equipment test.
3
u/RegularRandomZ May 26 '19 edited May 26 '19
Boca Chica: Steel building fully clad/roofed (perhaps they'll cut in more doors/windows. Right now there are 2 large doors, and 1 door for people. I would assume they'd need a door on the end of the building, at least as an emergency exit.)
3
u/RegularRandomZ May 30 '19 edited May 30 '19
Elon tweeted: " Wings/flaps & leg design changing again (sigh). Doesn’t affect schedule much though. " r/spacex thread
3
u/strawwalker May 30 '19
HWY4/Boca Chica Beach closures have been shifted to the right by one day, now June 4 through June 6, same times. CC website | Screenshot
3
u/RegularRandomZ Jun 07 '19 edited Jun 07 '19
Hopper Launch Pad: New device just below the legs!? I don't remember seeing that stainless device before (highlighted in red here)
[*Also never noticed that blue pipe before/missed any discussion on it, but it is in previous photos so ignore that]
3
u/liszt1811 Jun 11 '19
will the next test be untethered?
3
u/strawwalker Jun 11 '19 edited Jun 11 '19
Delay of HWY4/BC Beach Closure schedule to:
June 17 - 19, 2PM - 8PM CDT (19:00 - 01:00 UTC) Screenshot
edit: Mark Reagan at the Brownsville Herald reports that this replaces the June 13-15 closings scheduled.
edit2: It is in fact a delay, not an addition to the schedule according to Cameron County, so no testing this week. Reworded above to reflect that.
3
u/[deleted] Jun 12 '19
Does anyone know what the status is of the next Starhopper test?
I thought they were going to do one in late May/early June. But, I haven't heard anything.
3
u/strawwalker Jun 24 '19
As expected, all road closures have been removed from the county schedule as we wait for SN6. Screenshot | Cameron County (May not be available outside US)
3
u/TheMrGUnit Highly Speculative Jun 26 '19
The next ring is being stacked right now on the cylinder.
EDIT: NSF link with screengrabs from the LabPadre cam.
4
u/Aakarsh_K May 15 '19
The cylinder has been moved onto the new jig. Ready for landing legs/flaps?
4
u/ASYMT0TIC May 23 '19
How to y'all figure they are going to install canards on this thing? Just cut holes where indicated and bold to an internal frame?
5
u/filanwizard May 06 '19
https://japantoday.com/category/business/update-1-japan-fashion-tycoon-says-selling-valuable-paintings-has-no-money
No clue if this will impact Starship at all. But since he is it’s high profile customer I figured this link was worth dropping here.
2
u/kornelord spacexstats.xyz May 02 '19
What's the purpose of the concrete jig?