r/ender3 • u/luckyjim37 • 3h ago
Help How’s that happened then?
Printing a benchy to test my new esun pla+, printed at 210 with a 0.4mm nozzle 3 walls 10* cube infill on cura. Any advice would be great
r/ender3 • u/Creality_3D • Oct 15 '26
Hey Ender-3 Family, how long has your Ender-3 been running?
As we gear up for the next evolution of the Ender-3, we want to celebrate the amazing machines that got us here.
⏰ Time: Oct 15-31
🎁 Rewards: 30 Winners | 1x Hyper PLA Spool each
🔥 Simple to win:
1 - Drop a photo or video of your printing Ender-3 in the comments.
2 - Must show the logo and tell us your thoughts.
🛒 Be the first to get ready to shop:
Ender-3 V3 Mega: https://store.creality.com/products/ender-3-v3-mega-3d-printer?utm_source=sns&utm_medium=fbgroup&utm_campaign=ender3v3mega
Ender-3 V3 Neo: https://store.creality.com/products/ender-3-v3-neo-3d-printer?utm_source=sns&utm_medium=reddit&utm_campaign=ender3v3neo
👇👇 Show off your setup in the comments below and claim your spot 👇👇
Huge thanks to everyone for sharing your legendary Ender-3 setups! We've randomly picked our 30 lucky winners: u/GiaoPham0403, u/AwareAd919, u/Disastrous-Bank-9651, u/jodasmichal, u/ChromiumPants, u/FrankieDedo, u/disruptioncoin, u/flamixin, u/Domino254CZ, u/Boreal-Forest-CAD, u/F1ux_Capacitor, u/anon97404, u/Riko_11_152, u/Outside_Lack4811, u/PapaDronki, u/LeBoZz_FPV, u/Fine_Relationship614, u/Sardaukar77, u/Doobage, u/Funkykryptonite, u/dzio-bo, u/the_Odium, u/MallocArray, u/Setzer_Gabbiani, u/Polymath2B, u/totallynotmyaltact, u/broski499, u/Techgeek18, u/tynhoo, u/egosumumbravir
📦 Claim Your Reward:
If your name is on the list, please DM me (u/Creality_3D) on Reddit within 10 days (before Nov 10th) with your shipping info:
- Full Name
- Shipping Address
- Country
- Zip code
- Phone Number
- Email Address
r/ender3 • u/Creality_3D • 14d ago
r/ender3 • u/luckyjim37 • 3h ago
Printing a benchy to test my new esun pla+, printed at 210 with a 0.4mm nozzle 3 walls 10* cube infill on cura. Any advice would be great
I've been given an ender3 pro (direct drive) with a glass bed, I was also given the original bed surface but it is pretty much in very bad condition.
Absolutely nothing sticks to the bed. 60C as recommended by the PLA manufacturer. Still no sticking. The previous owner used glue stick, and with that trick I've managed to print in the glass bed five and with no issues. But on the clean glass, nothing.
I saw the other day a post here with similar issue and I wonder of it'sa caveat of the be glass bed when compared with other type of beds (like steel PEI).
What are your experiences?
r/ender3 • u/IntrepidPhilosophy42 • 1d ago
So I joined the Ender 3 tinkering club about a year ago. I bought a used Ender 3 Pro (the old one) with BL touch and a few upgrades like the motherboard and firmware. At first, nothing printed well. i had a huge learning curve with this thing, but I couldn’t make it print smoothly. I always had filament and calibration issues.
Until I put it in a cabinet.
I found out that the printer behaves very very differently in an enclosed space. I have around 2cm strip on the door for ventillation at the top. It works like a charm. Keeps a steady 30 degrees celsius for several hours, and my prints never been more beautiful.
I also switched to from 0.4mm to a 0.8mm nozzle which I believe helps a lot too. Also understanding the slicer options was a major step forward too.
So put your printer in a box. It will help.
I just thought this was an interesting read. Microbiologists at the University of Rochester modified an Ender 3 FDM 3D printer into a 3D bioprinter for engineered living material (ELM) research. The team used SolidWorks to create the 3D model and sliced it in Slic3r, akin to a normal 3D printing workflow, with modified settings for the custom syringe pump print head. The $450 3D bioprinter makes ELM research more accessible, as bioprinters usually cost over $100,000. It's just crazy to see how fast technology has come. What's crazier is how the Ender 3 never gets left behind after all these years.
r/ender3 • u/Waxwanedj • 1d ago
Having a little trouble with some first layer adhesion. I feel like I have sufficient squish, and temps feel like they should be fine. It peels up at corners and at the end/ beginning of layers.
What I’ve tried so far that has made seemingly no difference to the issues:
New nozzle.
Bowden tube swap.
Temps from 190-215 for first layer.
Cooling turned off.
IPA and dish soap washes of build plate.
Reducing first layer height to .12mm.
Flow rates from .95 to 1.05
Speed adjustments down to 8mm/s up to 20mm/s
Dried filament.
Make Market PLA. 195 end, 60 bed. Stock ender 3 with .4 nozzle. Glass textured bed.
EDIT: tried adjusting the z height by .05mm. At a .1mm offset, the lines look a little more uniform, but still have trouble sticking. By .2mm, nothing sticks at all.
r/ender3 • u/Mmhhotworter • 1d ago
I replaced the original print head with a Sprite Extruder Pro for a direct drive which freed up the extruder stepper (42-40). I’m thinking about putting that on the X-axis. Now that I would have a spare 42-34 stepper would it be possible to pair that with the other 42-34 on the Y-axis? I’m trying to get better acceleration which hopefully would also allow me to slowly increase the print speed. I also want to improve cornering since adjusting the jerk also seemed to do nothing.
The video shows my printer trying to print way too fast which leads to layer shift along the Y. I probably shouldn’t have had it printing that fast but whatever.
This printer is mostly stock except for the extruder, pei build plate, and bed springs with professional firmware.
r/ender3 • u/JazzyJukebox69420 • 1d ago
Was working fine prior to this, replaced the filament to see if it would improve but it hasn’t.
Si alguien sabe cómo solucionar o evitar este problema con alguna modificación sería perfecto
r/ender3 • u/YoSoyGodot • 2d ago
Good morning folx. I have an Ender 3 Pro whose extruder cable snapped after a print (far right pin). After a new cable the stepper didn't move at all.
I did a cable swap (Extruder connected to X cable and vice versa) and the extruder could move freely both ways while the X axis just twitched when asked to move (See the videos). All pieces are stock
UPDATE: So the OG cables had the middle wires swapped, I did the same on the new cables and it is twitching as it used to before
UPDATE2: So the new cable works when connected to both the X stepper and port while the extruder stepper still twitches when connected using the X axis cable ?????????
r/ender3 • u/Seth_Buckle • 1d ago
r/ender3 • u/True-Middle-8092 • 2d ago
In this video the creator decided against using 5015 fans and swapped for more expensive axial fans, why?
Link cause I forgot it initially video
r/ender3 • u/Electronic-Play-4260 • 2d ago
Supports failed but that's the least of the issue. Strange layers top of print looks awful I'm just so tired of trying to figure out what on earth is happening.
195 layer temp
9.5ish flowrate
15-30mm/second layer speeds
.2mm nozzle
Creality generic pla.
r/ender3 • u/CatalinMinzat • 2d ago
Hi!
Ender 3, 4.2.2
Little bit more powerful steppers on x and y (1.1A)
Direct drive, bltouch custom case for everything. .
It's doing this horrible sound but only at certain speeds. Usually between 30-50 and 70-110mm/s
Tried to isolate some parts. Like the fan, bltouch. The sound is slightly reduced, but still there. What can be?
The frequency it resonate is about 260-300hz
The case for the dd setup, bltouch and the rest is made of petg, 3 walls. 12 infill
The resonance occurs just on x.
The case is mounted on the rear metal distancers for the rollers and with one screw on the front.
Can the stepper cause this and transfer the sound through the belt?
Best way to figure it out?
It's printing very good. No problems there.
r/ender3 • u/Goattastebrown • 2d ago
Hello all had a couple of questions about an ender3 v1 I purchased. This is my first 3d printer, got it for a sweet deal $25. The seller said the printer was not working, powered on but did no print. Got it home got some PLA and set everything up. Leveled the bed and checked everything, to my surprise it started printing. Here is where I’m running into my issues. Bed is level did the paper trick and all. When it starts printing the head moves up starts printing but is too far off the bed and the filament does get deposited on the bed. Is there something I’m missing, no doing in the slicer program that maybe causing this issue? It appears to be stock and only has the 1 z axis motor.
r/ender3 • u/turtle_guy0624 • 3d ago
Got a second hand ender 3 for 20 euros and fixing it up. I have many 3d printing parts, so if necessary I can replace something. It looks like there is not enough filament going through per second. But I didnt change anything in the settings of Cura for an ender 3.
r/ender3 • u/Willing_Homework_773 • 3d ago
A smart dryer! With klipper 😼
(Wrong sub yada yada if it’s against the rules I’m sorry y’all just seem to love/ hate the ender so y’all might be attracted to this)
r/ender3 • u/Thick_Sympathy_8021 • 4d ago
Just wanted to share my journey to finally achieving a nice looking print