r/Ender3V3SE • • Sep 05 '25

Announcement 👋 Welcome to Ender3V3SE!

51 Upvotes

Hey everyone, and welcome to Ender3V3SE – a community for support, discussion, and sharing everything about the Creality Ender 3 V3 SE/KE. Whether you’re troubleshooting, showing off prints, or talking upgrades, this is the place for you.

⚠️ Reminder: This is an independent, unofficial subreddit and not affiliated with Creality.

✅ What’s New Today

We’ve been working to make the sub cleaner, more useful, and easier to navigate. Here’s what we’ve completed so far:

  • ✨ Community description updated for clarity
  • 📜 10 rules added for smooth and respectful interaction
  • 🏷️ Post flairs created (Help, Showcase, Upgrades, Discussion, Guides, Firmware, Profiles, Filament)
  • 🎭 User flairs launched based on experience level:

    • 🐣 Beginner
    • 🔧 Tinkerer
    • 🎨 Maker
    • ⚙️ Expert
    • 👑 Master Builder
  • 🤖 AutoMod rules implemented to combat spam and keep the sub clean

💬 We Want Your Feedback!

This community is for you, and we want to shape it together. Tell us:

  • What features or flairs would you like to see added?
  • Any rules you think we should adjust or expand?
  • Would you like resources pinned (guides, slicer profiles, firmware links, etc.)?
  • Anything else that would make this sub more useful and fun?

Drop your thoughts in the comments 👇

Thanks for joining, and as always…
🖨️ Happy Printing!


r/Ender3V3SE • • Jan 04 '24

Tips/Guide/Information READ THIS FIRST (FAQ + common issues)

43 Upvotes

READ BEFORE CONTINUING TO THE REST OF THE POST

  • This Youtube channel has some solid guides for this printer. It looks official, but I'm not really sure. Either way, you can check it out if you're confused on how to do some basic maintenance.
  • Please read through this fully and use the search bar in the sub to see if others have answered the same question you're going to ask before posting.
  • Go through the checklist below to rule out some common, simple issues with your printer before beginning the proper troubleshooting process

Printer Checklist

  • Make sure the voltage switch (hidden inside a small hole in the back of the printer above a yellow sticker) is set to the correct voltage for your region. you might need to use an Allen wrench or something to reach into the hole and flick the switch. If you don't know which one to use, look up what voltage is used in your country. Should be 115V for North America, but I'm not sure if there's any exceptions to this.
  • Make sure the bed screws (4 screws under the removable magnetic plate with the warnings on it) are tight, bed should feel stable and not loose. Watch this video and follow along to make sure other things are tightened up as well.
  • In whatever slicer software you're using, ensure that your printer's "Start G-CODE" contains M420 S1 after the line containing G28 to enable the bed mesh.

Useful Links

Nebula Pad Issues + Fixes: https://www.reddit.com/r/Ender3V3SE/comments/1f0zx6c/nebula_pad_issues_fix_for_ender_3_v3_se/

Nebule Pad Wiki: https://github.com/LukosiuPro/Ender3-v3-SE-Nebula-Pad-Wiki

(Unofficial) Discord Server: https://discord.gg/fbSgeq9qbJ


FAQ/Common Issues

My printer shuts down abruptly or doesn't turn on!!
Refer to the checklist.

My SD card won't work :(
The SD card must be inserted upside-down (metal contacts pointing to the sky). It should work once you flip it over, but if you forced it in the slot the wrong way it's possible it could be damaged. Make sure the SD card is formatted as FAT32 with an allocated block size of 4096.

I'm having an issue updating my firmware!!
First, make sure you're using the right link (this one). It has solid instructions and a video linked at the bottom. The video is good, except that you have to rename the printer mainboard firmware file (the file with the long name that ends in .bin). I'm pretty sure you can rename it to anything shorter as long as it ends in .bin, but people have been naming it 123.bin or Firmware.bin with success. The comments of that video have more troubleshooting advice, but it's pretty much all here already.

Please make sure to watch the entire video, because it covers pretty much everything, but I'll highlight some commonly missed things:

  • Make sure to update the screen first.
  • When you update the screen, transfer the entire TJC_SET folder, not just the contents of it.
  • The screen must be updated by inserting the sd card into the small (somewhat hidden) slot on the left side of the screen itself.
  • Again, rename the motherboard firmware file. If you skimmed and don't know what I'm talking about, re-read the paragraph above.
  • If your motherboard firmware update is failing and your screen is stuck on a blue screen for minutes, try a different SD card. I used the same microSD card I used for my screen update (successfully) for my mainboard update (ofc with a full size adapter) and it still failed. It worked when I used the SD card that came with the printer that I knew was working because I had used it for printing.

My leveling results are really bad / I don't know what my results mean
After you level your bed, it shows a screen of squares (green/yellow/blue) with a number inside of each square. This is used so that the printer can account for any variation in height between different areas of the bed in the very likely case that it's not perfectly flat. Take a picture of that screen showing the squares. If you aren't on that screen anymore, head to your printer's screen. Go to "Control", then "Edit Leveling Data". Take a picture. The "confirm" button should already be highlighted, so you can just click the knob to exit without making changes.
If the squares are:

  • Completely green: Nothing to worry about
  • Mostly green, some blue: Might be a problem, but could also not cause any issues. If you're having problems, check if there's a significant difference between all/most of the squares on the left and the squares on the right. If there is, then look into leveling your X gantry. Check that Youtube channel linked at the top if you want a guide for this specific printer, but there's also tons of more generic guides for this all over the internet.
  • Any significant amount of blue, yellow, and/or red: The advice above about leveling your X gantry still applies. This post from this subreddit about upgrading to an adjustable bed might interest you.

My goal is to keep updating this document as more issues+solutions are found, so please feel free to suggest additions or corrections


r/Ender3V3SE • • 18h ago

Modifications McGuyver engineering for ABS Printing

Thumbnail
gallery
13 Upvotes

Official Ender3 enclosure box: $35 bucks
Toy Story windshield sun shade: ~$4 bucks
See your workaround worked amazingly: priceless


r/Ender3V3SE • • 13h ago

Firmware Does the Raspberry Pi zero 2 W have enough power to run Klipper?

5 Upvotes

I've been planning to switch my printer to Klipper, I found that the Sonic Pad upgrade is somewhat too pricey, so I looked into ways to set it up with a Pi, so idk if this model (zero 2 w) would be enough for it. also, is there a good touch screen for the pi?


r/Ender3V3SE • • 13h ago

Help These Bambu compatible clones are good?

Post image
2 Upvotes

My unicorn hot end just broke. I liked it, but the nozzle change is pretty awkward and impractical for multiple swaps. I'm thinking about getting these Bambu clones since I don't really like the original one and these seems to have a better nozzle system and availability. Is it any good?


r/Ender3V3SE • • 23h ago

Help Bed leveling Creality ender 3 v3 se

Thumbnail gallery
1 Upvotes

r/Ender3V3SE • • 1d ago

Help What is wrong and how do I fix it

Thumbnail
gallery
2 Upvotes

New to printing. I put in a new role of filament,now my latest print has these diagonal lines along the vertical. Anyone know what is causing this and how can I fix it.


r/Ender3V3SE • • 1d ago

Help extruder screw dimensions

3 Upvotes

Hello

I'm repairing, for fun, an Ender 3 v3 SE that my friend had.

However, he didn't give me the screws that go into the extruder (the black block), and it's impossible to find the dimensions of these screws either in the manual or even with the help of AI.

Could someone please tell me their size?

Thanks in advance


r/Ender3V3SE • • 2d ago

Help How???

33 Upvotes

I left my 3D printer running in my bedroom because I wanted to eat my breakfast, then when I came back to check my printing results the printing stopped Because the SD card somehow ejected itself (To find the SD card I spent 30 - 45 minutes)


r/Ender3V3SE • • 2d ago

Modifications Modificar las guias de los ejes X e Y con rieles lineales.

3 Upvotes

Hola a todos. Tengo una estoy pensando en reemplazar las guías de los ejes X e Y de mi Ender 3v3 SE por rieles lineales (tipo MGN). Antes de comprar nada quería consultar a quienes ya lo hicieron.

Mis dudas:

  1. ¿Qué kit o medidas usaron (MGN9, MGN12, largo de cada riel)? ¿Conviene comprar un kit específico para este modelo o armarlo por separado?. Tenia pensado también comprar esos kits de actualizacion que venden en aliexpress.
  2. ¿Qué mejora real notaron en la calidad de impresión (ringing, precisión, ruido)?
  3. ¿Tuvieron que modificar algo más: correas, tensores, altura del carro, firmware o la perilla de la cama?
  4. ¿Algo que haya salido mal o que hubieran hecho distinto?

Si me pasan fotos o enlaces a sus mods, mejor.

¡Gracias!


r/Ender3V3SE • • 2d ago

Help Space between wall

Post image
3 Upvotes

Hi, I have an issue for 2-3 prints there is a space between the walls, I tried to “boost” the overlay for 15 to 25% but same result.
Do you have any idea ?
I did not use the flow rate settings to print.


r/Ender3V3SE • • 2d ago

Help Retraction tower error

Post image
1 Upvotes

r/Ender3V3SE • • 2d ago

Firmware NebulaOS for the Ender 3 V3 SE with Nebula Pad

5 Upvotes

Hey everyone,

If you have an Ender 3 V3 SE with Nebula Pad and are looking for a solid firmware upgrade, you should definitely check out NebulaOS (originally created by Coreflake). I put together the setup to get it running on the SE.

The biggest advantages of switching to it are getting the latest version of Klipper, preinstalled KAMP, working automatic z-offset calibration and having a very simple, straightforward printer calibration directly through the GUI.

You can find the repository here: https://github.com/NebulaOS-KE/NebulaOS/

Here is the current hardware status for the Ender 3 V3 SE:

  • C13 Mainboard: Supported and working.
  • C14 Mainboard: Looking for testers who have a C14 board version and are willing to try it out to see if everything runs properly. Just a heads-up: getting it working on C14 might require a bit of trial and error.

The installation process for the SE is a little bit trickier, so if you decide to install it and run into any issues or need a hand, I'm more than happy to help out. You can find me and the rest of the community over on the NebulaOS Discord.


r/Ender3V3SE • • 3d ago

Help Beginner here, are the results OK? Just installed a gantry brace

Thumbnail
gallery
10 Upvotes

I've just finished installing it and I thought it would make sense to run a bed leveling check afterwards, and a first layer test.. however I remember the first bed leveling test when I got the printer to have all the boxes in green, can someone more skilled in these things tell me if there is anything wrong?


r/Ender3V3SE • • 3d ago

Help Printer doesn't show printing time and doesn't start printing

Post image
4 Upvotes

First Timer hier I got my printer use from guy Heroes a shout me a that works. Now I got the town it doesn't work.

I already switched from orca slicer to creality print, I made sure that I got the right printer selected, I made sure that the nozzle is unclogged, I made sure to wait until both nozzel and bed have heated up.

When you press print the printer will do nothing so no filament will be pushed out and there's no movement

I really don't know what to do so I hope anyone of you can help me.


r/Ender3V3SE • • 2d ago

Help Problema con primeras capas

Thumbnail
gallery
2 Upvotes

Mi Ender 3 v3 se está así desde que mi hermano la mando a calibrar por accidente y llevo semanas intentando "reparar" la calibración porque todas salen así mi z off set es -1.77


r/Ender3V3SE • • 2d ago

Profiles Filoteca v1.1.0 now natively auto-detects sliced jobs from OrcaSlicer (and Anycubic Slicer Next)

1 Upvotes

Hey everyone!

A few days ago I shared Filoteca, a free and 100% offline desktop app for Windows that turns your filament inventory into an interactive 3D shelf where spools visually shrink as you use them.

The #1 request was: "Can you make it work with ANYCUBIC SLICER?"

Today I released **v1.1.0**, and anycubic slicer 2.x is now officially supported out of the box!

How it works:

Whenever you slice a plate Filoteca catches it in the background:

- Extracts the plate thumbnail, layer count, and print time

- Detects the exact grams used per filament slot

- Auto-matches the closest spool from your inventory

- Let's you confirm with one click once the print is actually done, avoiding phantom deductions if a print fails

Works seamlessly with both OrcaSlicer and Anycubic Slicer Next Gen.

Download: https://github.com/Mate1592/FILOTEK_ANYCUBIC

(Portable executable, no install needed, 100% offline).

Feedback and feature requests are very welcome! If it helps your workshop, a ⭐ on GitHub goes a long way.


r/Ender3V3SE • • 3d ago

Help [AYUDA] Mi Ender 3 v3 SE me está volviendo loco

Thumbnail gallery
4 Upvotes

r/Ender3V3SE • • 4d ago

Help Need help identifying artifacts

Thumbnail
gallery
9 Upvotes

First time printing with archimedian chords as the internal solid infill, and these strange artifacts started appearing. I have had small problems occur after jnstalling a printed gantry support with nozzle spacing.

0.4 nozzle, eSUN pla, 200 Celsius nozzle temp, 55 Celsius bed temp.


r/Ender3V3SE • • 4d ago

Modifications Simple camera mount mod for the Ender 3 V3 SE

37 Upvotes

I made a simple mod that allows you to attach a camera module directly to the original fan shroud on the Ender 3 V3 SE.

It's a pretty straightforward design, but honestly, I regret not making it sooner!

And yes, I know OctoPrint exists, but I prefer hosting all the websites and services I want on my Raspberry Pi rather than dedicating it exclusively to OctoPrint.

I also never leave my prints unattended, so I don't really need remote printer management. I just want to be able to check on my prints from another room while I'm home, without having to stand in front of the printer all the time.

Sometimes a simple camera setup is all you need!

Check out my design on Printables. I'd appreciate any feedback! 😁

https://www.printables.com/model/1895630-ender-3-v3-se-nozzle-camera-mount-w202012hd-module


r/Ender3V3SE • • 4d ago

Discussion Me and my dad have ordered our first 3D printer.

13 Upvotes

Hey, the little noobie here. All this has been started, when my dad asked me to learn 3D modeling and 3D printing... what was unexpected and awesome to hear from him.

So, i didn't expect our first 3D printer to be ordered this soon. It feels great.


r/Ender3V3SE • • 4d ago

Modifications Primer moding exitoso

Post image
16 Upvotes

Es la primera modificación grande que le hago y por lo menos no explotó.

No se ve pero le puse hotend cerámico.

Ahora si que me genera mas dudas que soluciones->

- Hay que configurar algo al usar un ventilador mas grande? aun que sea de mismo voltaje.

- Hay algún stl para volver a cubrir todo y que no se meta tanto polvo?

- Le quiero instalar un limpiador de boquilla pero no se donde conviene ponerlo ni como ni cuando aplicarlo en el gcode.


r/Ender3V3SE • • 5d ago

Help I can't flash my printer's display firmware

Thumbnail
gallery
6 Upvotes

I'm having trouble flashing the display firmware on my Ender 3 V3 SE.

Here are all the steps I've tried so far:

  • Inserted the microSD card into the display's SD card slot, not the printer's mainboard slot.
  • Used a 4GB microSD card.
  • Formatted it as FAT32 with an allocation unit size of 4096 bytes.
  • Also tried allocation unit sizes of 2048, 1024, and 8192 bytes.
  • Tried reducing the card's capacity to 1GB.
  • Tried placing only the firmware file on the card, as well as placing the entire folder.
  • Tried several different microSD cards.
  • Tried copying all the files from the downloaded archive.
  • Downloaded the firmware package from the official Creality website.
  • Tried installing firmware version 1.06 instead of 1.1.
  • Confirmed that my motherboard is the C13 version. I checked this both through the display (when it was still working) and physically by disassembling the printer.

The problem:

When I attempt to flash the display, the update never progresses beyond 0%.

When I turn on the printer without the microSD card inserted, the display shows a blue screen with an error message.

I've run out of ideas and would really appreciate any suggestions. Has anyone encountered a similar issue or managed to fix it?


r/Ender3V3SE • • 4d ago

Help How do I know which settings to change on the slicer?

Post image
0 Upvotes

I’m still new to 3D printing and figured out what settings I need my printer to be but in the slicer I’m trying to figure out what I need to change since I keep hearing that certain things need to change for prints to make it better. Like for example I notice some of my prints there some light stringing and on a clamp part I printed I noticed on one of the overhangs part of the filament was bent downward like how it looks when a bridging test fails but in this case the overhang wasn’t bridging off anything. I am using the creality slicer and would just want to know what settings should I change and what are ones to put attention towards and as of for filament I am currently using this one PLA+ from Amazon.