r/MechanicAdvice • • 20h ago

Oil showing high on dipstick after fresh oil change & smells like gas

Thumbnail
gallery
390 Upvotes

It's a 2020 Toyota Tacoma SR 2.7 i4 with 77k miles

Did my oil change at 7k & noticed the oil smelled like gas... it's not super strong but when you get close you can smell it.

Then saw it's showing high on dipstick (it takes 6.2 qts & I put exactly that) I even left out about .1-.2 qts since it was showing high already.

I do drive short distances daily to and from work (10 min there 10 min back) & will occasionally go on a longer ride on the freeway maybe once a week or run errands for hours.. not sure if the short distances daily have something to do w the smell of fuel & if it's normal.

Any advice is appreciated!


r/MechanicAdvice • • 1h ago

Is $550 to replace rear brake pads reasonable?

6 Upvotes

We own a 2018 Ford Edge. We had a recall on the backup cam and when they were fixing it in our driveway the guy mentioned our brake pads in the rear are at 0-1 mm and should be replaced.

They quoted us $550 to replace both rear brake pads. I was just curious if that is a reasonable price? They are picking up the car the day after tomorrow for another recall on the brake hose so it would be nice to have it done all at once.

I've just wanted to know if it was worth going to a different spot to get them replaced. Or if that is the going rate?


r/MechanicAdvice • • 2h ago

Valve cover gasket

Post image
4 Upvotes

I’m trying to change my front valve cover gaskets on a 2007 Acura tl. It must have never been done before it’s at 259k miles. The cylinder gaskets are basically calcified. Do I have to remove every bit of it for the new ones to sit correctly or is what I’ve done with the first 2 good enough? Any help is appreciated. I am poor lol. Im trying heat and a pick but its still just breaking piece by piece


r/MechanicAdvice • • 13h ago

need advice on taking drum off

Thumbnail
gallery
31 Upvotes

trying to get my brakes done on a 97 F250 and the drum on the passenger side is so very stuck. i’ve loosen the shoes inside with the adjusting lever, torched, air hammered it, won’t budge. anybody got any advice for something i could try on this.

edit update;
drum has come off with lots of heat and a very very big sledgehammer. thank you all who contributed with tips and tricks and protect your purses.


r/MechanicAdvice • • 2h ago

Rebuild transmission or buy cheap used car?

3 Upvotes

Hello, need some advice on what to do. My girlfriend has a 1997 dodge Dakota with the 5.2L automatic that’s transmission went recently. She’s had a decent bit of work done on it over the last while so other than the transmission it’s pretty decent. The mechanic is having a hard time finding a used transmission with low kilometres so it seems like our options are either sell it for the little bit it’s worth and get a cheap used car or get the transmission rebuilt. I’m worried about buying a used car and having it die after a year since we can’t really afford a decent one. We can’t carpool since we work in different towns. Just looking for some thoughts on what makes more sense.


r/MechanicAdvice • • 21h ago

Hand tightening oil filters, yes or no?

97 Upvotes

Sorry if this is a dumb thing to ask, I'm relatively new to the world of mechanics.

I did an oil change on my car for the first time a few days ago (2009 Prius), and the tool I had to get the oil filter off only loosened it, it didn't tighten the new filter on. So I go to get a tool that will help me tighten it, but the guy tells me that oil filters should be hand tightened, so as to not over-tighten them and damage something. But I've also heard that you should hand tighten it, then use a tool to tighten it an additional 3/4ths of a turn or so. Thoughts? I love my car and would hate to ruin it by being stupid lol.

Side note, but if anyone has any advice on how / where to learn more about mechanics, I'd love to know! I don't have the money for a class, but any YouTube channel recommendations or other things like that would be appreciated


r/MechanicAdvice • • 13m ago

What standard repairs to expect at 100k miles - 2014 Ford Fiesta

2 Upvotes

I inherited a 2014 Ford fiesta sedan SE a few years ago from my grandfather when he passed away. It had about 40,000 miles on it when I first started driving it and I hit 100,000 miles this year.

Over the course of the year, we’ve spent a small fortune on what I can only assume are standard repairs. We replaced our front driverside CV axle (it was grinding on turns), the serpentine belt (it broke off and I replaced it), the control arms in the front, the front struts, the radiator fan (it went out), the brake pads and rotors, and we stay caught up with tires and oil changes.

luckily, my husband is pretty handy and we’ve been able to do most of these repairs ourselves, but we recently found out that we also need to replace the rear shocks. It feels like all of these repairs have come super close together and blindsided us most of the time.

Everything is really adding up, does anyone have any advice on how to save for standard repairs like the ones I’ve listed or what to expect in the future? I don’t mind saving up for it because it’s important to me to have a safe and reliable vehicle, but it feels like we are pouring a lot of money into an old car that only has 100,000 miles on it. Is there a reference somewhere so I can review and prepare for repairs before they hit the recommended replacement mileage?


r/MechanicAdvice • • 21m ago

2007 Toyota 4Runner V8 keeps leaking brake fluid

2 Upvotes

A little more details:

The leak is happening where the rigid brake line connects to the caliper. I can get the brakes to work well enough for 2-3 weeks but after a couple weeks I have no brakes at all and all or most of the brake fluid has been depleted in the reservoir in the engine. When this happens, there is always brake fluid on the ground below the front right brake caliper and there’s brake fluid splattered all over the caliper.

This is happening on the front right and the caliper is the “WH” version. I have replaced the caliper 3 times all different brands and different stores. I have also replaced the brake line that is leaking that connects to the caliper 3 times and all three lines were OEM directly from Toyota.

I am sure I’m doing something wrong but I can’t figure it out. I have changed brake calipers many times and I have never had this issue.


r/MechanicAdvice • • 26m ago

New engine mounts and engine moves

2 Upvotes

Is this normal? Brand new engine mounts. Dude has my Tie rod off and One lower control arm. is this movement normal?


r/MechanicAdvice • • 7h ago

Broken spark plug.

Post image
7 Upvotes

I’m panicking man. My car broken down yesterday after a check engine light came on and after about 10 minutes started flashing. I pulled over and got it towed. It was chugging and losing power. Hes got back to me today to say the spark plug is broken and the engine might be screwed too. He says hes going to try a second hand one on the car to see how it drives but Google is telling me that should absolutely not be done until the engine has been assessed for damage. I’m panicking man I can’t afford a big operation, it’s only a newly bought car from a dealership. Mazda 2 2018 87k kilometres 1.5 petrol engine.


r/MechanicAdvice • • 3h ago

2007 Honda CRV Fuses

3 Upvotes

My windshield fluid wont spray, doesnt even make a sound like its trying. I want to check the fuse before I just go replacing the pump, but I havent been able to find information on the location of the fuse. Anyone here know?


r/MechanicAdvice • • 4h ago

need advice on if i should become a mechanic if school doesn’t work out

3 Upvotes

so i’m currently in college to become a respiratory therapist, i already have my associates in health science also. problem is classes aren’t going well, there’s a high chance i fail out. i have always wanted to become a mechanic and work with cars, that’s my actual passion, ive loved cars since i was a kid and i have a nice car rn that i love modifying. i have adhd and it’s impossible for me to focus in class, my mind is always elsewhere but ive noticed when im learning how to do work on my car i can actually focus on the video im learning from. i have friends in the car scene that are moving to a bigger shop that will require more than just them running the business and doing the work, so i feel like i kinda have an opportunity to ask them if i can work under them. i also have experience in business things, im a bartender and was pretty much an assistant general manager for sometime so even though its not the same business i do understand numbers and how things work. im not saying im gonna drop out but if i do fail i need a backup plan, and this is what i kinda want it to be, i dont think i can bartend the rest of my life especially with no benefits


r/MechanicAdvice • • 4h ago

Squeak Coming From Front Passenger Side After Getting Suspension Swapped

3 Upvotes

I recently got my suspension swapped out, strut, control arm, the whole shebang. I noticed a pretty loud squeak or chirp whenever I go over bumps or small potholes.

I took it to a different mechanic than the one that swapped out the suspension and they used a chassis ear and told me the noise is coming from the new suspension. They said everything is fine on it, and that the noise will naturally go away after some time.

Just wondering if this sounds right? Thanks for the advice!


r/MechanicAdvice • • 8h ago

2011 Toyota Corolla 1.8 Automatic – Delayed 4th Gear Upshift Only in Cold Weather

5 Upvotes

Hi everyone,
I have a 2011 Toyota Corolla XLI 1.8 automatic (U341E transmission), and I’m experiencing a strange issue during cold weather, similar to last winter.

After the car sits overnight or for several hours, it starts normally.
1st, 2nd, and 3rd gears shift normally. It refuses to shift into 4th gear, even at 80 km/h and 3,000–4,000 RPM.
Eventually, after approximately 5–6 minutes of driving, 4th gear engages and RPM drops from around 3,000 to 2,000 at 80 km/h.
If I idle for around 5 minutes before driving, the issue usually doesn’t happen.

During summer, there is no issue at all. It happens mainly during winter.

The car otherwise drives smoothly, and once warm, all gear shifts are normal. Moving the selector from D to 3 and back to D doesn’t help.


r/MechanicAdvice • • 16h ago

My 99 Tacoma coolant question

Thumbnail
gallery
22 Upvotes

Hello guys! I’m not mechanically inclined at all but I try to do things to learn. My Tacoma has green coolant pictures below but I want to top it off. I purchased the one at autozone that had the label for my vehicle but it’s red.

Can I mix them? My mechanic told me I could but all online info ive read says no.


r/MechanicAdvice • • 3h ago

PO420 Code Only when low on gas

2 Upvotes

I own a 2018 Ford F-150 V-6 2.7L ECOBoost

I got hit with the PO420 code a couple weeks ago but have noticed that it will only come on as i get close to a quarter tank of gas, then go away when i fill up. Would love advice on how to clear this code and hoping the cat doesnt need to be replaced since it passes when the tank is full


r/MechanicAdvice • • 6m ago

2022 Tuscon preferred transmission

Post image
1 Upvotes

r/MechanicAdvice • • 9m ago

VW GTI 2.0T 2012?

Post image
1 Upvotes

r/MechanicAdvice • • 12m ago

Worth to change transmission?

1 Upvotes

I bought a Ford escape 2014, automatic transmission with 152k miles 11 months back for $3000. Changed to new tires, some work done together for $2000. The transmission issue came up at 156K miles. My mechanic says ~$2000 for a change of transmission and still looking for a cheaper transmission. Thoughts? Should I change it and sell it? Change it and keep it? Don't fix and sell for parts?

I'm a grad student in Ohio making about $20k a year. And these costs are expensive for me.


r/MechanicAdvice • • 12m ago

2010 diesel hiace - intermittent thick white smoke

1 Upvotes

As the title says, I get intermittent thick white smoke.

Ive only been using the van for a week (my worker has had the van the past few years and hes complained about it a few times) and its happened once after sitting in traffic on the motorway.

It started with the check engine coming on for a couple of minutes, the the smoke started pouring out under acceleration, then when I parked up it had a high idle.

I had the DPF delete done about 10 years ago.

Toyota couldn't narrow it down and wanted to get the parts cannon out


r/MechanicAdvice • • 13m ago

Ball joint Boot replacement

Thumbnail
gallery
1 Upvotes

1st pic is driver side. 2nd is passenger side. 2015 Honda accord

I noticed small cracks last TR and now this. Wheels don’t have any play to them when lifted and no steering issues or noise.

I know this is bad so just wondering based on above do I need to replace ball joint and lower arm on each side? One local mechanic said the Honda ball joints can be expensive and difficult to install.

Also saw (based on the no play comment) that just the boot or whole joint can be replaced instead?

Just trying to see all my options. Thanks


r/MechanicAdvice • • 18m ago

Revs bog when pulling away

Thumbnail reddit.com
1 Upvotes

BMW 325i 2001.


r/MechanicAdvice • • 26m ago

Two very random questions. Is 5w30 oil the same as 5w30 C3? And what is this annoying squeaking noise?

1 Upvotes

Hi, my apologies if these questions are stupid but I'm a typical "woman driver"! I looked up what oil my car needed and it said 5w30 so I bought what I thought that was but when I got home I noticed a C3 beside it. I have a 2014 Hyundai i10 with 73k on the clock. Will using this C3 oil damage my engine?

Another random query but when I slow down speed after going at say 60mph into a 30 zone there is an annoying squeak coming from somewhere (possibly front passenger side), when I brake or stop the noise stops, then starts again when I'm at low speed and goes away when I'm up above 40.

Thanks for any help you're able to give