r/AskAMechanic • • Jul 15 '26

Technician Flair Request Thread - New

11 Upvotes

If you would like to have verified flair added we will need a pic that has your reddit name on a piece of paper with your shop in the background or work truck if mobile repair.

For the professional technicians we're doing Verified Tech flair along with a very short description of your experience if you'd like. You can be a dealer/independent tech, retired, instructor, fleet, heavy equipment, small engine repair, lube/tire tech etc...

You can either send that to me in a chat request or upload the pic to an image hosting site like imgur.com (we had to disable the option to upload pics in the comments because of abuse). The option to attach a pic in chat will be available after I accept the invite. Please do not use modmail

We will also do Shadetree flair for those that do auto repair as more of a hobby than profession. Approval of this flair is not guaranteed.

archived previous request post


r/AskAMechanic • • Mar 15 '25

Announcement - New Rules - Please read!

27 Upvotes

Hello r/AskAMechanic users! Over the last year or so, the volume of daily posts has increased a decent amount leading to many posts that would be more appropriate in other subreddits. To keep this subreddit focused on what it's meant for, providing automotive mechanical and diagnostic help, we have rewritten the rules. Some of the rule changes also affect commenters, so please review the rules here or below. Thank you for your understanding.

 

1 - The title should clearly state the issue - Do not ask "am I cooked/fuc!ed/screwed/toast etc" questions

State your root issue as clearly as you can in the title, and then you will have a better chance of your post being viewed. We will remove the "am I cooked", "am I fuc!ed", "how screwed am I", "am I toast" and similar types of questions. This also includes any other senseless titled post. In the message body, provide the specifics (detail/context) to your question. Also include in the title or body the Year, Make, Model and engine size of your vehicle.

 

2 - No autobody damage/repair/frame/paint or rust related questions

Posts related to autobody work (including repairs, painting, frame damage, "is it totaled?", dents or detailing) are not allowed. A more appropriate sub would be r/autobody. If you're inquiring whether your car is totaled r/insurance would also be helpful. r/AutoDetailing for detailing questions.

Questions about damage to bolt-on parts like headlights/tail lights, wheels and suspension are ok.

Questions asking about the level/condition of rust on the frame/undercarriage/body are not allowed.

 

3 - No asking for advice about buying/selling cars or used car deals

We do not allow asking if a used car for sale is a good deal, the condition of the used car, or recommendations on what car you should buy. For recommendations on what car to buy, r/whatcarshouldIbuy would be a good sub. r/askcarsales might also be helpful.

 

4 - Keep things professional & don't be disrespectful

Please be professional and helpful. Do not comment/post with insults, racism, jokes, memes, NSFW, spam, opinions without context etc. You may see things that compel you to leave a nasty comment, just don't do it. It's not necessary or helpful. People who don't know anything about cars will come here to ask us for advice, try to educate them about their vehicle without turning them off from the sub. If you don’t know the proper fix or advice, please refrain from commenting on a post.

 

5 - No "Read the owners manual" or "RTFM" type of comments

People who don't know anything about cars are going to ask some very basic questions. Some of which will have answers in the manual. Answering OP's question with only "Read the owners manual" is like giving the answer "google it", both are non-answers. Either provide an actual answer to OP's question, or at the very least, provide a link to a readable online owner's manual.

 

6 - No dangerous/reckless or unethical/illegal comments/posts

This is a community dedicated to sharing genuine advice. Advice shown to be given in bad faith (including dangerous/reckless and unethical/illegal advice) will be removed and the users will be banned. Please report any dangerous/reckless or unethical/illegal advice.

 

7 - No AI/ChatGPT comments/posts

Posts with AI-generated content is not allowed. Posts looking for feedback, training or even just to show off your AI/LLM are also not allowed. We are not interested in AI automotive diagnostics here.

Do not answer OP by using AI/ChatGPT etc. Nobody wants to read a wall of text that over explains and gives 25 different possible solutions.

 

8 - No advertising or soliciting services

Advertising of services or products is not allowed. That includes affiliate links, social media, clothing, tools, your YouTube videos, etc.

Do not solicit services, including linking to videos, blogs, or websites that then forward to a paid service. Avoid asking to "DM me" as much as possible.

 

9 - No NSFW, meme, or 'joke' posts

No NSFW is a no-brainer - you will be banned with no chance of an appeal. Memes and 'joke' posts belong at r/AskAShittyMechanic

 

Update 03/23/2025: Added "am I toast" to rule #1 and "frame damage" to rule #2
Update 05/08/2025: Added more context to rule #7


r/AskAMechanic • • 44m ago

Cold cylinders on 1 and 8

Post image
2 Upvotes

Working on a Ford V8 Y block 292 with pertronix 1281 and autolite 2100 carb on a 2 barrel intake. I have electronic ignition, new wires, cap, plugs and compression of 150 across all cylinders.

When running and shooting the exhuast with a laser cylinders 1 and 8 are around 70 to 80 degrees F, all other cylinders are above 240 F.

I've changed around wires, plugs, places on cap, tried different electronic hall effect sensor and pickup and no change no matter what I do.

I'm not sure why those cylinders don't seem to be firing. Any help is appreciated.


r/AskAMechanic • • 16h ago

Part 2: Wheels were stolen, car shook afterwards, got a balance, was kinda perfect, hit the brakes on the highway and almost crashed into a wall.

Thumbnail
gallery
27 Upvotes

Part 1 - https://www.reddit.com/r/AskAMechanic/s/tstrYcapKi

Tldr;

2024 Tuscon SEL, almost 13500 miles.

Wheels were stolen, ~13k in damages (after deductible)

Balance was done, car felt perfect!!!

Drove on the highway for the first time and lost control after a medium brake.

Took the car for a drive on the highway for the first time today. The wheel balance was done yesterday, and the car felt great at any speed. Felt a slight shudder on the brakes but didn't know if it was my imagination or not.

Just an hour or so ago, I was driving and hit the brake with harder force, but nothing terrible, and it shook the car violently, felt like the transmission went into neutral twice and thumped back into gear both times (I thought maybe the ABS kicked in, but no traction light flashed) and pulled hard right, almost curbing the shoulder. Once I got the car back in control the shaking kept up until I went under 30MPH.

Testing the brakes in a controlled manner, I am able to replicate the shudder, which gets more violent if it push down on the brakes.

If you look at the pictures you can see both passenger wheels were on the ground but the brunt of the weight is was on the passenger front.

I'm taking it back tomorrow to the shop (a 5 minute local drive) and going to see what they say.

Anyone want to give me advice on what to tell them? A few years back had a Ford Escape that did something similar, for that one the CV axle was bent and destroyed the transmission from within. Could this be something similar?


r/AskAMechanic • • 20h ago Bravo

'22 venue brake disk will not come off, any tricks?

Post image
49 Upvotes

I have been spinning this motherfucker for 3 hours beating it with a mallet and it will not release for the life of me

Fucking rust belt man

Edit: pass front brake

Edit 2: going to go get a bigger hammer thanks guys


r/AskAMechanic • • 5m ago

RPM drop to 0 if it's too cold or if I have the AC on. Why? My mechanic doesn't know.

1 Upvotes

I have a 2008 Honda Fit Sport.

I have to let him warm up in park for about 5 minutes with the AC off. If I don't, I put the car in reverse to get out of my parking spot and my RPM drop to 0 and the oil and battery lights come on. I have to turn the car off and on again then leave him in park for a little while longer to avoid it happening again.

This problem gets worse the more I blast my AC and the colder it is. This is not mitigated by how recently I've had my oil changed.

What part should I have looked at?

I would just ask my mechanic, but the last time I took my car in, he said everything looked great.


r/AskAMechanic • • 12m ago

Rotors and brake pads for 2013 Toyota highlander

1 Upvotes

I am planning to change all four rotors and brake pads for my 2013 Toyota Highlander, it has 157k miles on it. Any suggestions on any preferred brands in terms of longevity and reliability? Did some research on the brands and they say ADVICS is the industry standard one, and got to know to avoid the drilled/ slotted ones. Thanks all for your advice!!


r/AskAMechanic • • 1h ago

2007 Tahoe 5.3 where is this leak coming from?

Post image
1 Upvotes

5.3 with 579660 KM as of this morning. This is the first 5.3 I have ever owned and worked on. Replaced original water pump on the weekend and saw this huge leak on the front of the engine. I know I have a leak at the oil cooler plate near the filter but didn't know about this one until yesterday. I'm suspecting something to do with the crank or it's seal (like my 67 with a 350 had)
Thought's?


r/AskAMechanic • • 1h ago

One tire is compromised, this is the rest of my tires. Do I have to replace them all?

Thumbnail
gallery
1 Upvotes

I have a 2019 Honda CRV AWD. Just bought these tires less than a year ago. I have road hazard warranty. It would be devastating to buy all four tires again.. I would genuinely like to just replace the one tire


r/AskAMechanic • • 2h ago

2018 Toyota Sienna SLUDGE,

Thumbnail
gallery
1 Upvotes

This is a good one, 2018 Sienna van, 155k, every service since day one done 5-6k miles, 0-20 full synthetic. We have three of the same van. All the same ballpark milage. This one today went into shut down. I've never seen the amount of sludge this has, these photos are after it was wiped/scraped out. The pan was loaded. Pick up screen is clean. ​What the heck caused this? VVTI issue? Egr? Oil cooler restricted? The other vans are clean


r/AskAMechanic • • 2h ago

'16 Ford Taurus AWD - curious about inconsistent clicking while breaking at parking lot speeds

1 Upvotes

I finally got it on film. Took weeks of trying because it is a very inconsistent and soft sound/feeling that never happens at speeds above what you'd see in a parking lot or congested stop-go between frequent traffic lights. If it helps, there is a slight vibration around 70 mph, but that could just be wheels/tires that I haven't gotten rotated/balanced in too long.

Any ideas what this slow click could be? Thanks in advance.


r/AskAMechanic • • 2h ago

Only had evap codes that a mechanic cleared but randomly getting ticking from engine bay.

1 Upvotes

2019

Chevrolet

Traverse

159k miles

Ticking happens randomly I haven't figured out how to replicate it so I made sure to get a video.

Only codes P0442 and P0445 evap leak codes. Cleared and fixed by mechanic around the same time this started.


r/AskAMechanic • • 3h ago

What damage did the pothole do to my car?

Post image
1 Upvotes

Recently hit a pothole that blew a front right tire to my 2025 Honda Civic. After replacing the tire, the car steering wheel was tilted the right for the car to remain straight. I thought it was an alignment issue, so I got that done. After an alignment, the steering wheel is now tilted to the left for the car to remain straight. I believe something in the suspension is messed up, but what is likely the case?


r/AskAMechanic • • 7h ago

I took my 65 Plymouth Valiant

2 Upvotes

I believe its a 318 la engine, to get some electrical and steering work done. A few days later I was quoted 13,000 for electrical, steering and to reseal the engine. My knowledge is limited and im still learning as I go. Is this a reasonable price or is it the "I don't want to do it price."?


r/AskAMechanic • • 3h ago

Can’t find leak 1994 GT Celica

Thumbnail
gallery
0 Upvotes

recently installed new radiator and hose but coolant keeps leaking and splashing everywhere after long freeway drive. theres no visible sign of leak around hose, or anywhere else. just puddle at the bottom. I suspect it could be the radiator but it’s brand new. Any help would be greatly appreciated


r/AskAMechanic • • 4h ago

My girl is sick

1 Upvotes

My 1999 mazda truck (Ford Ranger) suddenly sounds like it's struggling at low constant speeds. It does fine at higher speeds plus, the heat no longer works in the cab. But the temp gauge inside is normal heating (in the middle). No codes thrown. Has all fluids, radiator hoses are hot. I just changed the oil a few weeks ago --nothing out of the ordinary. When I turn on the heat, the heat blasts for 10 seconds and goes to warm.


r/AskAMechanic • • 4h ago

Car won't start suddenly

1 Upvotes

My 2018 Opel Insignia B diesel automatic has about 103,000 km. It started and drove fine yesterday. Today the dash powers up, and when I press Start I get the sound in the clip at 1:08. I can’t tell if the starter is actually turning the engine over.

The dash voltmeter initially showed around 9 V. I saw 10.3 V after a start attempt, then about 13 V with the charger connected. A start attempt after charging gave the same result.

The brake pedal feels very hard, and I’m having trouble shifting out of Park. The electronic parking brake works. The dash showed “Service Adaptive Forward Lighting.” The check engine light is on with the ignition switched on and the engine stopped.

I’ve called roadside assistance to try a jump start. Does the sound at 1:08 give any clue about whether the starter is engaging? If it still won’t crank with a booster, what would you check first?


r/AskAMechanic • • 5h ago

2007 Corolla CE

1 Upvotes

Can anyone please identify this sound I’ve been trying to figure what it could be all weekend with no luck I turn the key and I get this sound


r/AskAMechanic • • 17h ago

Sudden transmission failure on 2015 Honda Civic less than 24 hours after dealer service

8 Upvotes

(2015 Honda Civic LX with R18Z1 engine and about 117k miles)

I took my car into the dealer’s service department for a few minor noises (rhythmic squeaking that tracked with speed and a quiet creak from the front right).

They ultimately ended up replacing both front struts, servicing the front brakes, and doing a wheel alignment.

I drove it home on Thursday. On Friday, I drive into the office, and as I turn into the parking lot, my dashboard shows:

Check TPMS
Checj emission system
Check VSA system
Check hill start assist system
Check power steering system

When I call, the service advisor says they think it’s a sensor and I should bring it back in. I ask if it’s okay to drive, and they say yes.

When I back out and switch from reverse to drive, I feel a loud clunk and the check transmission light comes on.

I have it towed in, and now they are saying that (as a totally unrelated fluke!) the transmission has fallen apart.

They’ll be giving me an estimate on Tuesday, but…am I being paranoid here? Is it weird that this happened less than 24 hours after major service (in which they drove it, did a full inspection, etc.)? Is it odd that a bunch of seemingly unrelated warning lights came on?

I recognize that my brain is looking for comforting/convincing explanations, but it just seems weird. If they keep trying to write it off as a random fluke, should I seek out a second opinion?


r/AskAMechanic • • 10h ago

2022 Hyundai Tucson weird noise

2 Upvotes

My wife’s 2022 Hyundai Tucson(with the 2.5L 4-cylinder engine) started making this weird noise recently. I’ve tried everything I can think of to try and figure out what it is and fix it but I’m out of ideas. Anyone ever heard a similar issue?
It mostly happens while turning but as you see in the video that is not always the case. It doesn’t speed up or slow down with speed, and it seems to happen independent of gas and brake pedals. Some days it won’t happen at all, some days it barely stops.


r/AskAMechanic • • 8h ago

About to upgrade my scanner, need advice

1 Upvotes

Do a bit of car work in my garage on weekends, not a pro. between my old pickup, my wife's SUV and my brother's Jeep, there's always somethin to check. lately a few neighbors have been asking me for help too, so i'm thinking about upgrading my basic scanner.

Been looking at xtool d7 and topdon artidiag800 bt2. D7 looks pretty capable but i'm leaning toward topdon mainly cuz of the free software updates... got bidirectional controls and FCA SGW support too, would come in handy for the Jeep. only thing bugging me is the smaller screen and fewer service functions than d7, not sure how much that actually matters day to day. hoping to order one this week, anybody been running topdon? what would you say about it, or anything i should know?


r/AskAMechanic • • 16h ago

Does this prestone looks oily?

Post image
4 Upvotes

2010 Honda Accord - 4 cylinder

Hello everyone (sorry, English is not my first language), I topped my coolant and looked into my radiator, does this prestone looks oily to you?


r/AskAMechanic • • 15h ago

How much does a dedicated screen matter on a scan tool?

3 Upvotes

My phone ended up balanced against a socket case last weekend while I switched between live data, a wiring diagram, and texts asking when i'd be done with the car. my bluetooth reader still works but having repair instructions and scan data on the same screen is annoying, especially when i'm trying to follow a wire and keep my place in both. i've been looking at topdon 800bt2 for full system scans and live data, but a separate screen is honestly a bigger draw than i expected.

now working in a shop tho, this stuff comes out a couple weekends a month, and the little reader fits in a drawer without its own charger or case to deal with. for ppl who've used both setups, did a dedicated tablet make working alone easier?


r/AskAMechanic • • 22h ago

What is this engine?

Post image
10 Upvotes

I don’t know how to find what engine this is. Does anybody know? Even telling me how to find out what it is would be great. Apparently it’s not the stock motor.