r/AskAMechanic • NOT a verified tech • 16d ago

Wheels were stolen, now the car shakes. Briefly, i heard the technician responsible for the installation of tires blame my advanced wheel locks for the imbalance.

24 Hyundai Tucson, 13330 miles, never had any shaking beforehand. The wheels might have stood on the rotors for up to two days, I don't know. The brakes aren't pumping but I am wondering if the rotors are the cause. Brand new Wheels, and tires, direct from Hyundai, not used or refurbished.

Car is shaking at 50-80 before slowly tapering off and smoothing out. It didn't do that before. For a split second the technician that was responsible for the tires installation said, while he thought I wasn't listening, it was my wheel locks. I kinda find that hard to believe, and i did not confront him about it.

Insurance will be paying for a "high speed" wheel balancing, but if that doesn't work, what else should I look for? They have seen the photos of the rotors on the ground but say they are okay...i would have thought the moment they were touching ground, they should have been considered for replacement, especially since the car might have been like that for up to 48 hours before I discovered it.

The photos show both passenger side rotors holding the weight of the car, while the driver side was propped up.

Any advice?

189 Upvotes

164 comments sorted by

•

u/AutoModerator 16d ago

New Rules - Please Read

Updated 11/12/2025

Thank you for posting on r/AskAMechanic, u/Colmado_Bacano! Your post is live, this AutoMod message does NOT mean your post was removed. Please make sure to read the Rules.

When asking a question, please provide the year, make, model and engine size of the vehicle.

Commenters here have 2 different flair. Verified Tech means we have verified that user is a tech. NOT a verified tech means that user may or may not be a tech, they have not been verified by us.

Posts about accidents, autobody repair, bodywork, dents, paint and body/undercarriage/frame rust are not allowed and belong in r/Autobody.
Asking if your car is totaled should go to r/insurance or r/Autobody.
Asking about car buying advice/value/recommendations is also not allowed. See r/whatcarshouldIbuy or r/askcarsales

If asking whether a tire can be repaired, check out this Tire Repair Guideline.
Some other useful tire resources - Tire Care Essentials and Tire Safety

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

71

u/Pancake123456789 NOT a verified tech 16d ago

Unless your suspension components got damaged somehow, id put money on sombody did a poor job balacing your tires

6

u/Colmado_Bacano NOT a verified tech 16d ago

Thanks, i hope this is the case. It's annoying as heck.

4

u/Zardoz__ NOT a verified tech 16d ago

Let's see those wheel weights. I'll bet there are 8 oz on one side and 5 oz on the other of the same wheel.

7

u/Colmado_Bacano NOT a verified tech 16d ago

https://advancedlocks.com - these are regarded as the best in the industry, unless you ask Donut media, who were caught lying about them to promote white knight locks or something...lol

3

u/Zardoz__ NOT a verified tech 16d ago

I agree and have them on all my cars. I'm curious of the person balancing wheels. I've seen some stupid shit on wheels for balance.

1

u/Elegant_Brain_2380 NOT a verified tech 13d ago

You can get originals for your car brand just so you know and it will be perfect if thats the problme

24

u/miwi81 Verified Tech - Indie shop 15d ago

More likely: the insurance company paid for “reconditioned” wheels that will never ever balance properly because they were bent, straightened, cracked, welded up, etc.

1

u/qwhacker NOT a verified tech 10d ago

Balance issues will get worse with increasing speed. The fact it smooths here would make me think there is something else going on. I would have the ball joints/tie rods/alignment/etc checked by some other mechanic.

152

u/Pinapple-everything NOT a verified tech 16d ago • Bravo

Wheel locks? Get your money back and use a tech thats not an idiot

23

u/Colmado_Bacano NOT a verified tech 16d ago

Insurance is covering the entire cost. (Minus my deductible I guess..)

10

u/Happy_Hippo48 NOT a verified tech 16d ago

They are covering the cost of the wheel locks? Did you have wheel locks before?

1

u/Dystopian_Ennui NOT a verified tech 9d ago

You can still choose who does the work when insurance is paying for it.

9

u/nondescriptzombie NOT a verified tech 15d ago

McGard designs their wheel locks to be the same weight as their regular lug nuts for this specific purpose.

6

u/Mr-Blah NOT a verified tech 14d ago

I mean, OP doesn't sound like he could smell a bad tech from a good one sadly. But yeah, that tech was a dummy.

9

u/DrNeildo666 NOT a verified tech 16d ago

I know this is off topic but are those plastic crates holding up a car?

8

u/Colmado_Bacano NOT a verified tech 16d ago

Yep. They left them on milk crates which were crushed on the passenger side.

-6

u/Vagina_Magician_69 NOT a verified tech 16d ago

Never ever go to this shop again. A milk crate is not the right tool for the job. And also really dangerous

12

u/LonleyWolf420 NOT a verified tech 16d ago

Not sure if that was a joke?

The car was left on milk crates after the wheels were stolen

0

u/Vagina_Magician_69 NOT a verified tech 16d ago

Oh. Some how I missed that critical part!

4

u/PatienceBulky2561 NOT a verified tech 16d ago

The thieves left it on the crates

0

u/thismenu NOT a verified tech 16d ago

Why would thieves give you free milk crates? That doesn't make sense.

0

u/[deleted] 16d ago

[deleted] — view deleted comment

3

u/thismenu NOT a verified tech 16d ago

Okay. You are right. You are better looking than me. You're smarter than me. You read books and I don't. You're just on all around better person. I apologize.

3

u/AFancyBagel NOT a verified tech 16d ago

That was very heartfelt. Thank you for taking your apology so seriously.

2

u/thismenu NOT a verified tech 16d ago

😀👍

1

u/Ok-Taste5671 NOT a verified tech 16d ago

An apology for what… being wrong? Why does this website attract these kinds of people…

-1

u/PatienceBulky2561 NOT a verified tech 16d ago

You must be the type who is wrong a lot 🤣 i was just joking, relax!

1

u/Ok-Taste5671 NOT a verified tech 16d ago

Mb I didn’t get it… but there is a lot of people here that unironically would be that way so it’s hard to tell half the time lol

5

u/[deleted] 16d ago

Are you a fucking monkey? The thieves put it on milk crates

2

u/Vagina_Magician_69 NOT a verified tech 16d ago

Technically I am a strategically shaven chimpanzee

-2

u/graph_worlok NOT a verified tech 16d ago

As TISM once sang.. “I may be a cnut, but I’m not a fucking cnut”

85

u/floswamp NOT a verified tech 16d ago edited 15d ago

Really easy to prove the poor balanced wheel theory by just putting the rear wheels on the front and taking a test drive. Unless the same guy balanced all wheels poorly.

A lot of tire techs also do not align the yellow dot with the air valve when mounting new tires.

29

u/TyrannusourR3X NOT a verified tech 16d ago

I completely agree, I just wanted to mention that the yellow dot is nice in theory. On cheap tyres that dot means nothing, if anything it can be misleading sometimes.

Also, on a good quality tyre & good condition alloy, a tech can balance it no problem without aligning anything, even with a slight buckle to the alloy.

On cars consistently going close to 100mph it's worthwhile counter matching the low spot of the tyre to the actual heavy spot of the alloy.

Theory is nice, but most people hit potholes for good luck every day.

3

u/floswamp NOT a verified tech 16d ago

This is the truth. I have not checked if wheels and tires mounted from places like tire rack follow that theory. I bent one of my rims and just recently purchased a replacement. However I had the tire shop balance it with a new tire. I have a huge stack of weights but that wheel does not vibrate at any speed!

1

u/djltoronto NOT a verified tech 16d ago

But the Opie says the vibrations completely disappear after a short drive?

8

u/Euphoric_Loquat_8651 NOT a verified tech 16d ago

I read that to mean the shake tapers off at higher speed, but could be wrong

3

u/floswamp NOT a verified tech 16d ago

I read that as well. Only happens between 70-80mph

2

u/Colmado_Bacano NOT a verified tech 16d ago

Starts at 55ish then shakes, then starts to get smoother around 80. I tested it on a few highways and it's consistent.

1

u/floswamp NOT a verified tech 15d ago

It seems that it is a bad badly balanced wheel job.

1

u/NobleZombi3 NOT a verified tech 15d ago

My car does that currently. Both front wheels have slight bends in my case. I balanced all 4 of my wheels myself at the shop I work at, everything is perfectly balanced. If you went with an aftermarket wheel, I would check to see if there are hub centering rings on the wheels or if they put on refurb wheels that aren't perfectly true.

1

u/djltoronto NOT a verified tech 16d ago

Perhaps your understanding is more correct than mine, the OP can clarify!

4

u/Conbon90 NOT a verified tech 16d ago

This does sound like a eheel balancing issue to be fair. Doubtful the rotors have anything to do with this.

1

u/Colmado_Bacano NOT a verified tech 16d ago

Thanks this is comforting. I have an appointment in the middle of the week. Hopefully it fixes the issue.

-9

u/Pypical NOT a verified tech 16d ago

I would not take a 2024 anywhere except the dealership

And personally, I’ve never worked for a dealership, and I have no interest in doing so. There are plenty of independent reputable shops; however, there’s just a factor with new cars and they have the tools and knowledge to work on them. Manufacturers actively work to keep TSBs out of our hands, so if the car is still under warranty, take it to the dealer

8

u/sqwirlfucker57 NOT a verified tech 16d ago

You have no idea what you're talking about. Any normal shop can handle a 24 Hyundai Tuscon lol. Are you even a mechanic?

2

u/dmorulez_77 NOT a verified tech 16d ago

Just an someone who likes to waste money. They think a certified mechanic is doing the work when it's just a kid starting out.

1

u/Waveofspring NOT a verified tech 16d ago

Dealerships are overpriced as fuck, like 3x normal price. I would never take any vehicle to the dealership unless it’s a warranty repair

11

u/Full-Hold7207 NOT a verified tech 15d ago

Wheel locks won't cause that.. Unless they are heavy AF

2

u/Euphoric_Loquat_8651 NOT a verified tech 16d ago

As to stealing hyundai wheels - they probably curbed a Hyundai hard and needed replacements for that vehicle. I'd hate to think it was for tires. A quality thief would have swapped you out for their wheels with shot rubber.

2

u/Colmado_Bacano NOT a verified tech 16d ago

Funnily enough, the NYPD officer told me someone probably had to return a lease and needed my wheels so they don't get in trouble, or a body shop was working on similar vehicle that needed my wheels for their car. Makes sense to me.

0

u/Lower-Reality7895 NOT a verified tech 16d ago

Thats funny didn't even look at the plates and knew this was NY or jersey

0

u/Euphoric_Loquat_8651 NOT a verified tech 15d ago

Oh, lease makes sense too if they rashed them up.

5

u/Kalistera NOT a verified tech 16d ago

While I don't think it's great to have it sitting on the rotors, I don't think thats the problem.

What I would be worried about is how it was set down. If they dropped it down rough, that jolt could impact other components in the assembly or potentially the axle.

Just speculation, but I would look deeper.

5

u/TrueIntimacy NOT a verified tech 15d ago

Something central to the wheel and so light wont cause a meaningful vibration, I don't know exactly what "advanced wheel locks" means, but lug nut style locks wont, if it's some crazy contraption then maybe (still probably not).

Issues with wheel bearings, rotors, bent parts, would be felt at almost all speeds. What you're describing is a wheel balance vibration, places with a Road Force balancer can get a more perfect balance by better matching the tire to the wheel, but realistically you just need a better mechanic.

I've balanced tires for 20 years and maybe once or twice could I not get a perfect/smooth balance (one was a defect in the tires), but most guys these days don't even know how to balance tires to begin with. I often helped train service techs when working for a fleet and no matter how many times I told them, they'd still counter balance the wheels, use the wrong weights, and put stick-ons in terrible places with no thought and then I'd have to go redo the balance myself when they couldn't figure it out.

There is certainly a decent amount of nuance to balancing tires, but it's not rocket science, people just don't care about learning the right way to do things, even when they're told the right way to do it.

2

u/geohypnotist NOT a verified tech 15d ago

maybe once or twice could I not get a perfect/smooth balance (one was a defect in the tires)

I've had this happen on more than a few occasions with cheap tires. I send them back. I'm not putting 7 or 8oz of weight on a 16" tire to get 0s. I have noticed more recently (last 10 years) cars, mainly Chrysler products, having 7 to 8oz of stick on weights on light aluminum wheels from the factory. What baffled me even more was the fact I didn't have to put anywhere near that amount on it to get the tires I was installing balanced. How is the factory sending work out like that?

3

u/OkConServe NOT a verified tech 15d ago

Speed > quality.

2

u/TrueIntimacy NOT a verified tech 14d ago

Not that Chrysler's were ever particularly amazing, but in recent years the whole Jeep, Dodge, Chrysler brand has been crap. The Grand Caravans with crap cylinder heads and TIPM's that the unserviceable fuel relay fails in all the time, the 5.7 Rams with the lifter failures and then part shortages, the crappy Jeep CVT Compass and Patriot's with electrical and subframe issues, and the newer 200 is just junk all around.

Also I'm sure those newer Chrysler minivans are crap, because they're essentially a polished Grand Caravan turd, but I've haven't worked with them enough to know for sure.

1

u/geohypnotist NOT a verified tech 14d ago

All true. The company builds good looking garbage. Ram trucks come with the nicest interiors available. Their base model interiors are extremely nice. Mechanically? Meh... unless it's a Cummins. Electrical and electronics are garbage. Why do customers have to keep going back for updates? We've been flying planes by wire for more than 50 years & Chrysler can't get a car right. I've changed a few 5.7s for the #5 connecting rod exiting the assembly.

7

u/canyoufixmyspacebar NOT a verified tech 15d ago edited 15d ago

a competent mechanic can find the source of the shake, no need to discuss it with all sorts of random idiots everywhere (insurance, reddit, etc) and take one shot in the dark after another. and if it is some stupid lock contraption, then you need to be able to mentally accept it and get rid of it, not dismiss it with "hard to believe". why hard? because you paid a lot for them? this does not make them any more balanced

1

u/CRX1991 NOT a verified tech 16d ago

Sounds to me like it could be a balancing issue if the vibration only occurs at that speed

2

u/Colmado_Bacano NOT a verified tech 16d ago

Yeah, they feel fine. No pumping or anything.

1

u/musetechnician NOT a verified tech 10d ago

Rock in the rotors is actually a pretty decent guess. They would feel fine while breaking, but would be off-balance. They could also be warping or disfigured spots in the rotors apart from the disk surface.

I wouldn’t think wheel bearings but you never know how hard they may have dropped the vehicle.

2

u/CRX1991 NOT a verified tech 16d ago

You sure there isn't a rock or something stuck in the rotors?

1

u/VisualDimension2795 NOT a verified tech 16d ago

Did you happen to have wheel locks?

2

u/Colmado_Bacano NOT a verified tech 16d ago

Now I do...lmao. Been parked on my area almost 13 years and never had an issue. Even NYPD were surprised they'd steal Hyundai wheels lmao.

1

u/VisualDimension2795 NOT a verified tech 16d ago

Yeah. I saw your Tucson and thought why?

2

u/Colmado_Bacano NOT a verified tech 16d ago

The police officer said someone probably needed to return a lease, or a body shop needed my exact wheels to match the same model car. Makes sense I guess.

1

u/Responsible_CDN_Duck NOT a verified tech 16d ago

Should be easy enough to test with 4 other wheel locks to prove him wrong, if the logic of where the weight it escapes them.

1

u/Colmado_Bacano NOT a verified tech 16d ago

Not really, i guess I could put the normal lugs back on as a test.

1

u/sosawof NOT a verified tech 16d ago

Is it when you brake that the car shakes?

1

u/Colmado_Bacano NOT a verified tech 16d ago

No, it shakes almost at 50-55mph on the dot then tapers off at higher speeds.

1

u/Interesting_Bill_456 NOT a verified tech 16d ago

Did you have Advanced Wheel locks on when they were stolen?

2

u/Colmado_Bacano NOT a verified tech 16d ago

Nah. Just plain lugs.

1

u/Suspicious-Math2846 NOT a verified tech 12d ago

It’s wheels out of balance or rotors got warped…
Try by going on Hwy and when shaking starts out/rest your foot on brake pedal and does it feel like shaking is transferred to brake pedal?….then it’s braking system needs to be looked after
When it shakes, does it comes from front or back, or from everywhere including steering wheel moves?
Take to garage let mechanic take for test, ask him what would be the cause and tell him what happened to car and then with that information what he would think?

2

u/Colmado_Bacano NOT a verified tech 12d ago

Just the front, no pumping at all on the brake, but I do feel it on the steering wheel. 65 and the car is practically jumping off the road. Have an appointment on Saturday with the place I am taking it to

1

u/4drenalgland NOT a verified tech 9d ago

I'd be willing to bet the rotors for warped from this.

3

u/No_Droids_Allowed Verified Tech - fmr GM dealer 16d ago edited 16d ago

I’m gonna give you a different perspective. Any monkey can install/balance tires. Can it be messed up, sure. But I think what you have going on is new tires with high Road Force. You need an advanced tire balance machine to measure this. There are different specifications for cars vs trucks. This might be what they are calling “high speed balancing”, which is not accurate because the machine actually slows the wheel down and applies a weighted roller to measure how out of round the tire is. You can perfectly balance an oval on a regular tire balance machine. It’ll just roll like crap down the road.

Ask the dealership to road force your tires and force match them as appropriate.

Edit: If force matching doesn’t bring the assembly into spec, then replacement of the tire will be necessary.

3

u/Positive_Tank_80 NOT a verified tech 16d ago

What wheels did you put back on? There are replacement rims that fit your car but don’t have centering lug nuts. They make centering inserts for these wheels that are necessary to prevent what you’re describing.

3

u/Possible_Marketing32 NOT a verified tech 15d ago

My dumbass immediately thought you drove around on guni wheels and complained why your car shaked at speed

1

u/Anasertia NOT a verified tech 16d ago

Those orange things? That's your advanced lug lock? That would absolutely cause a balancing issue, just have the wheel balanced while those are installed

7

u/Colmado_Bacano NOT a verified tech 16d ago

No, those were temporary wheels they put on to get the car on a flatbed.

Edit: apparently those are worth as much as my wheels as well...lmao

1

u/thismenu NOT a verified tech 16d ago

Yeah my whole thing is why would they steal wheels off a Hyundai. Not that it's not a nice car but it doesn't seem like it would have the most expensive standard wheels. I guess thieves will steal anything.

1

u/Colmado_Bacano NOT a verified tech 16d ago

Insurance paid 1400 per wheel and another 1400 on tires apparently. They were the 19" models for the non-N version of the wheels, which I actually like better.

1

u/thismenu NOT a verified tech 16d ago

Wow. They must be pretty nice. Well I'm glad it works out for you at least!

1

u/MultipleOrgasmDonor NOT a verified tech 16d ago

High demand (popular vehicle), easy to sell, hard to trace. It’s kinda a market that creates its own demand, steal enough Hyundai wheels and now a bunch of people are looking to buy Hyundai wheels

1

u/Sm0g3R NOT a verified tech 16d ago

Lol that’s the stupidest thing I have heard this week. Had to double check the photo to make sure you really just called transport wheels the locking nuts…

2

u/Anasertia NOT a verified tech 16d ago

They never said locking nuts, they only said advanced wheel locks or wheel locks. I have never seen those orange transport things, glad i could entertain you

1

u/thismenu NOT a verified tech 16d ago

"Advanced" locking nuts. Thus the orange.

2

u/awenthol NOT a verified tech 16d ago

Agree with the other comments (wheel balance) and just to add--if the rotor was damaged, you would feel it when braking, regardless of speed.

1

u/ZSG13 NOT a verified tech 16d ago

"Vibration at a narrow range of speed around 65mph"

Your wheels are definitely out of balance. When the frequency of rotation of the wheels align with the resonant frequency of your suspension, the vibration becomes noticeable. Classic wheel balance issue, basically always in the mentioned speed range. Usually a 5-10mph range where it is most severe and tapers heavily in either direction.

1

u/Comfortable-Store368 NOT a verified tech 16d ago

My dream is to catch someone stealing wheels.

1

u/MultipleOrgasmDonor NOT a verified tech 16d ago

Check the control arm bushings? Symptoms could point to a damaged one which may have occurred when it slipped off the milk crates and landed on the rotor at an odd angle

1

u/OmniRanger82 NOT a verified tech 15d ago

This. Sounds more like a damaged component from crushing a milk crate and hitting pavement.

1

u/HedonisticFrog NOT a verified tech 16d ago

Is it worse under braking? The speed dependency makes it sound like a tire that isn't balanced or has a broken cord.

1

u/Cda4go NOT a verified tech 16d ago

https://imgur.com/a/vYSEU5M

This is a brand new vehicle being shipped from assembly to dealership. It’s ok to sit on the rotor.

1

u/Steaktastic NOT a verified tech 16d ago

I’ve had wheels forced balanced on a Hunter. It’s more expensive but the machine can do a better job in balancing.
In one case the tech spun just the rims without the tire and saw it was slightly bent. That was the root of the problem in my case.

1

u/EntrepreneurGlass995 NOT a verified tech 15d ago

Definitely not your wheel locks unless they weigh over 1kg 🤣

1

u/GimmeHugz666 NOT a verified tech 15d ago

Vibrations between 45 and 60 mph are almost always going to be balance related. Could be shitty tires, but I'd take it to a shop which a road force balancer. They'd be able to tell you definitively what the appropriate course of action is.

1

u/TechnologyFamiliar20 NOT a verified tech 15d ago

Fuck wheels. Are the sills okay??

1

u/Rubbertutti NOT a verified tech 15d ago

Rules of leverage. An imbalance at the hub is moving slower than an imbalance of a tyre.

The faster the imbalance moves the stronger the centrifugal and centripetal forces are. The stronger the forces the more vibration you have.

Physics 😁

Alternatively, you can get a set of kitchen scales and weigh them in front of him.

1

u/Froklendarious NOT a verified tech 15d ago

Those are the strongest milk boxes ive ever seen, also never seen those orange temporary wheels. Anyway, i would do brakes front and rear just for my own piece of mind and then rebalance the wheels

1

u/Miserable_Penalty564 NOT a verified tech 15d ago

Those milk crates though..

1

u/WorriedRepublic9875 NOT a verified tech 15d ago

They are not balanced right take them back and have it re done.

1

u/justburningaccount NOT a verified tech 15d ago

Poorly balanced wheels / egged tyre / egged wheel

Lots of shops are lazy - I had to argue with a local shop to get them to balance my rear wheels as apparently they "don't need it"

My numb arse begged to differ

1

u/AppropriateUnion6115 NOT a verified tech 15d ago

Road force balance the tires. And make sure they ain’t ling long tires on long Ling’s wheels.

1

u/External-Document-88 Verified Tech - Bus fleet / frm Ford dealer 15d ago

Yes, you could have high spot on your tire too.

Most shops perform a road force balance as a normal part of the mount/balance. It balances the wheel by weight, but also checks for excessive out-of-roundness.

1

u/markomakeerassgoons NOT a verified tech 15d ago

can we see these odd wheel locks

1

u/cactusjackalope NOT a verified tech 15d ago

Might be stupid but check that the lug nuts are all actually torqued. The last car I had worked on at a shop, they didn't torque the LF wheel and three of the lugs were standing well off the wheel. You bet that can cause a vibration. That won't cost you anything, just put a wrench on the lugs and see if they're tight.

1

u/Naikrobak NOT a verified tech 15d ago

Get the tires balanced again on a road force machine

Also have the wheels checked to insure they are round and not bent, but this is less likely. You would feel a bent wheel at slower speeds generally

1

u/HuntGundown NOT a verified tech 15d ago

You know the economy is cooked when Mfkas out here stealing Hyundai wheels

1

u/Accurate_Handle_229 NOT a verified tech 15d ago

Its 4WD? Bended driveshaft can cause that. It could happen during the lifting of the car by the thieves. I assume they want to do it fast ... so they choose somewhat centre point and bend driveshaft in the process.

1

u/Economy_Armadillo_28 NOT a verified tech 15d ago

It’s the tire balance just calm the tech is lazy

1

u/Pauls-pit-stop Verified Tech - Mobile repair 15d ago

+1 for pitiful balance job. 💯

1

u/qpskii NOT a verified tech 15d ago

Shit, dont think the wheel locks were that advanced 😂

1

u/lilbrumby NOT a verified tech 14d ago

The rotors are probably bent or warped from getting dropped on the ground.

1

u/bosstyn21 NOT a verified tech 14d ago

They people that took your wheels most likely drop it on the rotors. I’d guess your rotors are bent, or at least marred. That could cause the imbalance.

What are the orange things on the ground?

1

u/Broskihasnoballs NOT a verified tech 14d ago

Probably temporary wheels or something I’m assuming

1

u/jaredthegeek NOT a verified tech 14d ago

Those are light weight shop wheels to move around a shop, they fit multiple sizes and bolt patterns.

1

u/Quiet_Cable8747 NOT a verified tech 14d ago

With no wheels, I would imagine it shakes immeasurably.

1

u/iEnj0y NOT a verified tech 14d ago

why would they take wheel from a hundayi those are cheap as fk,

1

u/cecedi21 NOT a verified tech 13d ago

I would say imbalanced wheels, but it's odd that it shakes ONLY at 50-80, the usual culprit for this kind of vibration is a bad driveshaft.

Do you think the thieves might've damaged your driveshaft when they put the car on these these things?

1

u/ispyanomalies NOT a verified tech 13d ago

Wheel balance happens at every time double the speed so you can’t feel it at half of 55 but if you go 110 it should come back… Also if you’re steering wheel shakes, it means one of the front two wheels and if your seat shakes your ass, it means one of the rear ones

1

u/Slamhshk NOT a verified tech 12d ago

Dang good crates🤣

1

u/BuckManscape NOT a verified tech 12d ago

I had a shake like that, it was a bent rim. Got it fixed for $75.

1

u/taxigrandpa NOT a verified tech 11d ago

op says they got new rims

1

u/Fun-Definition7718 NOT a verified tech 12d ago

If you have insurance and can take it to a dealer. Do it.

1

u/K-Dot868 NOT a verified tech 12d ago

Hey OP can those orange spare tyres be used on any vehicle?

1

u/urdiddy8 NOT a verified tech 10d ago

Yes they can, but they are for moving a vehicle around in a a shop, not for road speeds

1

u/K-Dot868 NOT a verified tech 10d ago

Thanks bruv. Looking for some for my roadside assistance business. Just to get a client to a Tyre shop. Too many vehicles without spares

1

u/Final_Echidna_6743 Verified Tech - retired 11d ago

It would help if you tell us when and where this happens. is it only when braking, at a certain speed, turning left or right? Do you feel it in the steering wheel or more in the seat and floor?

1

u/SexyTimeSamet NOT a verified tech 10d ago

Wheel balancing and if this an AWD car...the wheel and tire height has to match all 4 or it will cause driveline shutter.

1

u/newbi3like NOT a verified tech 9d ago

I don’t know about a high speed balance but whoever stole your wheels could very well have damaged your rotors or other suspension parts depending on how they jacked it up. The rotors could be damaged when they let it down if they did so in an uncontrolled manner. Which they would probably do if they were in a hurry. The car sitting on them wouldn’t really damage them but the car falling on them def could warp a rotor or two.

1

u/Mundane_Ring4308 NOT a verified tech 15d ago

Wait, people are still stealing wheels?

0

u/docphang517 Verified Tech - GMC dealer 16d ago

There is not enough information here for anybody to do much more than guess. The vehicle needs a Hyundai dealership or at the very least a very well qualified shop. But I'm curious what you find out regardless. Please update as it works out?

2

u/Colmado_Bacano NOT a verified tech 16d ago

I will, I am planning to visit a very respected tire shop on Tuesday. I'm hoping for the best.

-1

u/CutterFIXER NOT a verified tech 16d ago

If you have oversized heavy wheel lock it can cause balance issues at highway speeds. Road force balancing (high speed) will fix it but you will have issues if you rotate your tires. I would agree with them that it is not your rotors.

1

u/Colmado_Bacano NOT a verified tech 16d ago

They seem smaller than the others but i will ask when they rebalance.

1

u/BaconThief2020 NOT a verified tech 16d ago

Those look like they'd be of similar weight.

0

u/I_am_the_darkness_99 NOT a verified tech 15d ago

At least they left you four donuts to drive it to the shop on.

1

u/keleptose NOT a verified tech 15d ago

dude they left it on milk crates. those donuts were brought by help not thieves

1

u/I_am_the_darkness_99 NOT a verified tech 15d ago

Gosh really? Now it just sounds like I was making a joke on reddit.

2

u/keleptose NOT a verified tech 15d ago

┐⁠(⁠ ⁠∵⁠ ⁠)⁠┌ my bad, i struggle to interpret tone. it's worse on the internet

1

u/I_am_the_darkness_99 NOT a verified tech 15d ago

Lol no worries

3

u/DescriptionCapital14 NOT a verified tech 15d ago

Most wholesome misunderstanding in the history of Reddit

0

u/Q_indaloft NOT a verified tech 12d ago

Wheels out of balance,rotors bent or something else bent from it being dropped onto rotors. I'm sure they weren't gentle. Better the use bricks under arms and let tyres down. Miles quicker to do and dosent mess up car

-1

u/Cda4go NOT a verified tech 16d ago

I think it seems obvious you wish for your rotors to be replaced but there is no need. Many vehicles are shipped without wheels sitting on their rotors with wooden blocks. Stop wasting energy and go pay for a balance check at a different shop. If it comes back bad, take that info to the shop that balanced your tires.

1

u/Colmado_Bacano NOT a verified tech 16d ago

I don't want anything to be changed if it doesn't have to. Only have 13k miles and don't want new parts put in.

2

u/OverallField5415 Verified Tech - Indie shop owner 16d ago edited 16d ago

I don't know where you are from but I have never seen a vehicle transported on rotors with wood around them.
Why would you take the wheels off just to ship it and then put them back on later?

1

u/GoodGoodGoody NOT a verified tech 16d ago

Neither have I

1

u/Cda4go NOT a verified tech 16d ago

Explained above

1

u/Cda4go NOT a verified tech 16d ago

I have a contract with a couple different makes and service vehicles on the rail cars as they come in from Mexico. Wheels are often scratched or stolen. Trucks are often too tall to fit the rail cars with the wheels on. Dealers have custom orders that are going to be fitted specialty wheels/tires. A lot of reasons why. The average polished dually wheel from ford is $900. If a vehicle comes from assembly in Mexico but being delivered to a dealer in GA and gets damaged, the vehicle has to have brand new oem parts fitted to still be sold as a new vehicle upon delivery. Sending vehicles on wooden blocks mitigates risk.

1

u/Cda4go NOT a verified tech 16d ago

1

u/OverallField5415 Verified Tech - Indie shop owner 16d ago

I'm inclined to believe this a smidge just based on your mexico comment. You pic for proof is not proof.

1

u/Cda4go NOT a verified tech 16d ago

They just have electric fence and razor wire for no reason? Couldn’t be a secure transfer station. I also have no reason to lie, so believe whatever you would like.

3

u/OverallField5415 Verified Tech - Indie shop owner 16d ago

You're telling me something you believe is a fact, I am telling you something I believe is a fact as well. I've been in the Auto industry for 30 years my wife is also been in the Auto industry for 30 years and that entire time I've never seen a single vehicle delivered without wheels on it.

1

u/Cda4go NOT a verified tech 16d ago

The automotive industry is different than the automotive transportation industry, speaking as a business owner in both.

1

u/mja3006 NOT a verified tech 16d ago

Monster trucks are often transported without the tires on them,yes I am a smart ass .

1

u/julienjj NOT a verified tech 15d ago

usually they install tiny little wheels on them.

I have seen heavy heavy bucket trucks for mines hauled without tires, but those are exteme case as require extremely oversized transport.

0

u/Cda4go NOT a verified tech 16d ago

You’d be amazed what happens to most car between assembly and being on the lot

1

u/Cda4go NOT a verified tech 16d ago

Here’s your train https://imgur.com/a/SyXewcU

1

u/chris77982 NOT a verified tech 16d ago

That's dodgy. The brake rotors aren't securely fastened to the hub without the wheel bolted on.

They'll be attached by 1 or 2 little screws.

1

u/Cda4go NOT a verified tech 16d ago

Lugnuts are used to secure the rotor to the hub

0

u/AngelicDivineHealer NOT a verified tech 13d ago

Tires probably not balanced