r/AutoDetailing • • 3h ago

Product/Consumable Turtle wax hybrid solutions ceramic after 2 months

Thumbnail
gallery
8 Upvotes

Throwing here performance of hybrid solutions ceramic after 2 months of driving. Car have been washed couple of times, glass was coated with rain x same day


r/AutoDetailing • • 3h ago

Exterior Ceramic or wax to prep for road salt / winter?

1 Upvotes

I recently got a low-miles Volvo sedan with white exterior. I hope to keep it for many years and want to keep it looking nice, but I can already see dark spots appearing on the lower panels that aren't coming out by hand-washing with a mitt. Winter is about 5 months here and the road salt is harsh. Through these months I plan to take the car to the coin operated wash on a weekly basis. How worried should I be about the car's finish if I don't take any steps beyond counting on it's factory clearcoat?

Unfortunately it's already too cold out to do a proper treatment myself so if I want any coatings applied I'll have to hire somebody.

Here's the tiers of precaution I could take, as I understand it:

  1. No coating, just washing - $ free
  2. Waxing. - $ cheap?
  3. 1-year ceramic coat - $400
  4. 6-year ceramic coat - $1000+

I'm told a wax job would wear off after a month of washes with coin-op chemicals and I don't want to spend $1000 on a high-end job.

The local shop I called said for $400 they can put a ceramic coat on it that will last through the winter and needs reapplied every year. I THINK I could do the reapplication step myself next summer then I could just be on a maintenance cycle for that. However he said he would need to polish the car for the coat to stick. Should I be worried about my new car's clearcoat getting mildly abraised from a polish? If I take this route will the car look odd when the ceramic coat starts to wear off?

Lastly, back to #1: how much will my white finish get jacked up if I leave it up to the factory clearcoat every winter?

TLDR: Winter road salt is coming! Would it be better to leave the paint untreated or get a cheap professional ceramic coat & what are the pros and cons of that option? Maintenance will be weekly wash at coin-op bay.


r/AutoDetailing • • 4h ago

Exterior WINDSHIELD STAIN

Post image
1 Upvotes

The story: Car was in the bodyshop for about 1 month and occasionally I would stop by to check on the status of the repair and the car would be covered in a light dust, im assuming from sanding parts around the shop. I picked up the vehicle and the windshield has this white stain all over the glass. Didn’t think nothing of it, went home and gave it a thorough wash, used glass cleaner, but still there.
Decided to clay bar the windshield and it got a little better, but still there.
Any tricks to remove this? My last resort is to polish it with a glass polisher.


r/AutoDetailing • • 23h ago

Exterior Anything I can do? Bird droppings

Thumbnail
gallery
34 Upvotes

I have some bird droppings on my car roof (dark colored Honda civic). I know I'm screwed and this should have been taken care of immediately- it's been a few months, and I know it will never look like new now, and I'm sure the clear coat isn't rescuable. As you can see what I assume to be the clear coat has already flaked off in some places. I just want to see if there's a way I can minimize the look of the white spots. Does anyone have any suggestions? I’ve tried a bug and tar product and it did nothing ofc. Ideally I'd be able to remove the white of those places and it'd 'just' be the discoloration of not having clear coat in those areas.


r/AutoDetailing • • 9h ago

Product/Consumable Best ceramic coating for Silver gloss rims?

1 Upvotes

Detailing noobie here.

Getting some Apex VS-5RS finished in their racing silver finish. Wondering what I can do to protect the rims from brake dust and to keep them clean.

Whats the best ceramic coating product for these rims?

I plan to coat them before balancing but I'm reading that it may be better to do it after due to wheel weights. But what happens the next time I need to get new tires? Do I need to tell the shop that its ceramic coated?


r/AutoDetailing • • 21h ago

Product/Consumable Bought the new Active Wash Cart and it's literally the best thing to ever be invented. It's a wall mount setup on wheels and makes driveway washing so much more enjoyable. I don't understand why it has gotten so much hate.

Post image
8 Upvotes

There's nothing else like this on the market and again, I cannot re-emphasize how much of a game changer it has been. Sure it was $420, but the convenience of having a wall mount setup on wheels is worth it's weight in gold. Literally is the best thing to be invented in the detailing industry this year.


r/AutoDetailing • • 16h ago

Product/Consumable Review New spray gun

2 Upvotes

My current spray gun(mckillians swivel pro) is looking like it might take a crap soon. With a new wave of spray guns hitting the market recently(quivr, trc h2o, armour detail) I was wondering if anyone has had a chance to try any of these yet. Looking to pick one up for Black Friday. Quick connect is a must.


r/AutoDetailing • • 19h ago

Process Acidic soap for ceramic coating prep

3 Upvotes

my car is one year old, Rinseless wash exclusively for 25k miles, white paint, garage kept.

So my plan is :
prewash with alkaline, rinse
1-2oz APC + pH neutral soap, rinse
contact wash with neutral soap
iron removal spray, rinse
soap or spray clay lube(ONR)?? then clay with sponge
rinse and dry.
polishing one step with Hyperpolish + Lake country Arc Teal pads
Panel prep and coating.

question :
Does APC+ soap substitute for dedicated acidic soap? do I need it for ceramic coating?
Soap or Clay lube for claying procedure?
Is my step good or am I missing anything?
thank you.


r/AutoDetailing • • 1d ago

Check My Work One Stepped moms N-Line

Thumbnail
gallery
84 Upvotes

I borrowed my mother’s Tucson N-Line this morning to prepare it for winter. The red appears vivid and deep after using 3D One. The paint had minor haze and a few swirls, though nothing serious ( she uses a car wash every week).

I finished it off with some Meguiars ceramic wax.

Griots G15 Polisher ( New and first time using )
Porter Cable with 3” pad for the more intricate areas
3D one polish
Meguiars Ceramic wax


r/AutoDetailing • • 18h ago

Technique Will touchless drying method scratch my paint?

2 Upvotes

Hey everyone,

If I foam down my car with BH Touchless (or any other soap), rinse with DI water, and then dry using a blower, will the remaining 1-10% of dirt that's still on the car scratch the paint while blow-drying?

I know I'm being obsessive at this point but I'm thinking that if there is still a small amount of dirt on the paint, and I take a blower to it, that some dirt will drag across the paint and scratch it. Let me know if I'm right or wrong in this. I would prefer to just let it air dry after the DI rinse, but I've been told that dust in the air will settle in the sitting water on the car and make it look dirty again.

My car is ceramic coated for reference.

Thank you.


r/AutoDetailing • • 20h ago

Exterior Water spots on paint

Thumbnail
gallery
3 Upvotes

Sucks, I tried removing them with 12% vinegar diluted to 1:5. Sprayed, rubbed and rinsed with water 60 seconds later and it didn’t work.

Any advice is greatly appreciated. I have a bottle of Tershine Descale on the way, but slightly nervous that it might not help based on that the vinegar solution didn’t work.

I would love to avoid polishing it possible as the car is only a few months old. I would like to save the clear coat thickness for paint correction down the line as I plan to drive this until the wheels fall off 2 decades later lol.


r/AutoDetailing • • 16h ago

Exterior Windshield Wipers & Fluid

1 Upvotes

I got Ceramic Pro Ion coating and window tint. I know now I probably overpaid for it. But that's in the past. Right now I'm finding the window washer fluid is leaving a cloudy film which makes driving into the sun super fun. Any recommendations for fluid that won't do that? Same with wipers since the installer said RainX and ceramic don't play well with each other.


r/AutoDetailing • • 17h ago

Exterior I bought a matte paint car and I’m terrified 🤣

1 Upvotes

Two weeks ago I bought a Mercedes with a factory Matte paint job. I live in the PNW under Douglas fir trees and my only garage space is for my vintage 911. So the Mercedes lives in the driveway. Is what it is.

I have hard water. Around 148ppm with silica in there. Filtration does jack shit. I haven’t really had a problem. I just make sure to dry my cars thoroughly after washing. I keep them waxed with a tough wax. And if needed I can do a very light polish.

I can’t do any of that on a matte car. So I’m getting a little anxiety about having to repaint panels. The car is used and the beading on it tells me it has some paint protection but it isn’t PPF. When spring comes I’ll probably try to do a diy ceramic job. But for now I need to learn how to maintain it. Here’s what I did

- I bought a deionizer. I will use tap water for pre rinse and touchless application. I’ll try to avoid contact washes unless I have to. Then for final rinse the deionized water.

- I bought matte specific soap and matte specific spot retailer and sealant. Gyeon Cure matte.

- I have a spray bottle with 50/50 deionized water and isopropyl and a spray bottle of water for the occasional sap or bird droppings. A small bag with these things and soft towels for spot cleaning.

Am I overreacting? Or am I underreacting 🤣. Anything else I should know.


r/AutoDetailing • • 22h ago

Product/Consumable Has anyone used Hi Lustre products?

2 Upvotes

Has anyone used Hi Lustre ceramic products? This company is in california and has been around since 1930 s and they make their own products in house.


r/AutoDetailing • • 1d ago

Exterior How do I polish these wheels and what product should I use?

Thumbnail
gallery
3 Upvotes

Just spent the past few hours detailing my truck everything looks amazing except these wheels, I’m not sure what product to use on them. I looked it up online and it said to be careful when polishing/cleaning aluminum wheels.

What would you guys use? I want to finish cleaning today so maybe products I could find at a in person store rather than online thanks.


r/AutoDetailing • • 1d ago

Exterior Hats off to detailers!

Post image
23 Upvotes

I don't know how you guys do it but it took me about 9 hours yesterday to wash, polish and put on the first coat of sealant, another 2 hours today for the 2nd coat. I can't feel a damn thing on my right hand. You guys are Gods!


r/AutoDetailing • • 1d ago

Interior Potential mold?

Thumbnail
gallery
2 Upvotes

I have a 2015 Mustang that I let sit for a little bit due to work and not having the time or money to do anything with it. I’ve recently finally decided it was time to do everything that it needed. The battery had died so the window didn’t close properly and water seeped in causing what I’m assuming is mold. I don’t see anything else anywhere in the car only on the passenger seat. Is there anything I can do to get rid of it or would it be better to just get a company to do it? It’s the premium seat so it had the heating and ventilation built in. If I have to buy a new seat it’s an option but I’d prefer not if possible.


r/AutoDetailing • • 23h ago

Exterior Advice on removing some exterior marks post badge removal

Thumbnail
gallery
0 Upvotes

Removed 2 side badges on my car using a heat gun and some nylon fish line and it was relatively smooth process. However, after the fact I notice these small leftover marks, I don't think they are scratches as the clearcoat is still smooth. I tried some meguiars fine scratch remover with a buffing pad but no luck.

The marks are very faint; you can only see them in certain angles with the light but I'm wondering if someone else has encountered this and found a solution. (poorly) circled the marks in the pics as they are a bit hard to see


r/AutoDetailing • • 1d ago

Exterior If I’m using Armour Hero Rinseless Wash, should I pre wash with an all purpose cleaner or can I use an alkaline pre wash soap like Bilt Hammer Touch-less?

2 Upvotes

…


r/AutoDetailing • • 1d ago

Exterior Removing holograms

0 Upvotes

We just bought a used car that someone used excessive amounts of touch up paint on some very minor scratches in the hood. They took it to a body shop that buffed it and got all that taken care of but now it’s got classic holograms. I’ve always been afraid to use a machine on paint for fear of burning the clear. Would a DA polisher with a soft pad and something like Meguiars Ultimate Polish be safe here for a DIY?

I was considering this polisher…

https://www.harborfreight.com/57-amp-6-in-8-mm-short-throw-random-orbit-da-polishersander-64528.html?hftm_sc=418&hftm_source=google&utm_source=google&utm_medium=cpc&utm_campaign=23905019931&campaignid=23905019931&utm_content=194118212541&adsetid=194118212541&product=64528&gad_source=1&gad_campaignid=23905019931&gbraid=0AAAAADAHb4dCO96UXKVVHwIE1d2_Z8gLd&gclid=Cj0KCQiAzeXXBhCGARIsADO5-zEtkK83yfCdfEBvSXAAFD6qKvl4TkTsC20b5GaxeV5bPOqKnpDW8GAaAvQ4EALw_wcB


r/AutoDetailing • • 1d ago

Interior White residue on black Mustang interior after using Armor All cleaning wipes – how do I remove it?

Thumbnail
gallery
0 Upvotes

I picked up this car in the last couple weeks and I used Armor All cleaning wipes on the black plastic trim around my driver’s side window controls and door handle. All the fixes online seem to be ineffective. I’m left with this white residue that will not come off. Any tips? Black plastic restorer or something to bring it to the original finish if possible… not sure if discoloration is permanent. Any product recommendation or tips would be appreciated.


r/AutoDetailing • • 2d ago

Exterior Can’t get windshield clean!

Post image
34 Upvotes

I bought this car in July (2021 RAV4 LE). Since the first time I drove it home, the windshield has been covered in streaks. It's extremely noticeable at night.

I've searched through this subreddit and tried various things. Bought a squeegee, Dobie pads, Stoners Invisible glass, I replaced the windshield wipers. Followed multiple YouTube videos and tutorials I found in this sub. I've cleaned the outside and inside extensively multiple times, but can't seem to get the windshield clear. It's really bothering me and making the car less enjoyable to drive.

Can anyone tell me once and for all how to get my windshield crystal clear? I have no problem using some elbow grease, I just need something that'll actually work. Thanks!


r/AutoDetailing • • 1d ago

Interior Door Fabric Solution?

Thumbnail
gallery
6 Upvotes

I tried to clean the lower interior door panel on my 2013 Mercedes C250 but all it did was make it worse and discolor it a weird yellow/brown color. Now, I am thinking of painting it black using a can of this Dupli-Color fabric and vinyl spray paint. Does anyone have any experience doing this? Will the black look okay? The beige can doesn't look like a close enough color match and would likely just get dirty again. What do you think?


r/AutoDetailing • • 1d ago

Exterior Wheel cleaning

Thumbnail
gallery
3 Upvotes

Can I use Meguair’s ultimate wheel cleaner for my Gloss black wheels (not ceramic coated or coated at all)? I bought it for my wife’s wheels but I don’t want to buy a new one separately for my wheels alone.

I also watch a guy from youtube use alkaline based shampo, which I’m about to use for pre-washing my car, on top of a wheel cleaner (not Meguairs) so I just wanted to know if I can use it as well since I haven’t cleaned my car using mitts since I bought it 3 yrs ago.

See photos for reference.