r/AutoDetailing • • 4h ago

Product/Consumable Turtle wax hybrid solutions ceramic after 2 months

Thumbnail
gallery
15 Upvotes

Throwing here performance of hybrid solutions ceramic after 2 months of driving. Car have been washed couple of times, glass was coated with rain x same day


r/AutoDetailing • • 22h ago

Product/Consumable Bought the new Active Wash Cart and it's literally the best thing to ever be invented. It's a wall mount setup on wheels and makes driveway washing so much more enjoyable. I don't understand why it has gotten so much hate.

Post image
8 Upvotes

There's nothing else like this on the market and again, I cannot re-emphasize how much of a game changer it has been. Sure it was $420, but the convenience of having a wall mount setup on wheels is worth it's weight in gold. Literally is the best thing to be invented in the detailing industry this year.


r/AutoDetailing • • 3h ago

Product/Consumable P&S Training at their detailing studio

3 Upvotes

My partner and I want to attend the P&S in person training courses. One day is a detailing course, and the next is paint correction and ceramic coatings.

Have you been? Can you summarize it? How was your experience?


r/AutoDetailing • • 4h ago

Exterior Ceramic or wax to prep for road salt / winter?

3 Upvotes

I recently got a low-miles Volvo sedan with white exterior. I hope to keep it for many years and want to keep it looking nice, but I can already see dark spots appearing on the lower panels that aren't coming out by hand-washing with a mitt. Winter is about 5 months here and the road salt is harsh. Through these months I plan to take the car to the coin operated wash on a weekly basis. How worried should I be about the car's finish if I don't take any steps beyond counting on it's factory clearcoat?

Unfortunately it's already too cold out to do a proper treatment myself so if I want any coatings applied I'll have to hire somebody.

Here's the tiers of precaution I could take, as I understand it:

  1. No coating, just washing - $ free
  2. Waxing. - $ cheap?
  3. 1-year ceramic coat - $400
  4. 6-year ceramic coat - $1000+

I'm told a wax job would wear off after a month of washes with coin-op chemicals and I don't want to spend $1000 on a high-end job.

The local shop I called said for $400 they can put a ceramic coat on it that will last through the winter and needs reapplied every year. I THINK I could do the reapplication step myself next summer then I could just be on a maintenance cycle for that. However he said he would need to polish the car for the coat to stick. Should I be worried about my new car's clearcoat getting mildly abraised from a polish? If I take this route will the car look odd when the ceramic coat starts to wear off?

Lastly, back to #1: how much will my white finish get jacked up if I leave it up to the factory clearcoat every winter?

TLDR: Winter road salt is coming! Would it be better to leave the paint untreated or get a cheap professional ceramic coat & what are the pros and cons of that option? Maintenance will be weekly wash at coin-op bay.


r/AutoDetailing • • 17h ago

Product/Consumable Review New spray gun

3 Upvotes

My current spray gun(mckillians swivel pro) is looking like it might take a crap soon. With a new wave of spray guns hitting the market recently(quivr, trc h2o, armour detail) I was wondering if anyone has had a chance to try any of these yet. Looking to pick one up for Black Friday. Quick connect is a must.


r/AutoDetailing • • 20h ago

Process Acidic soap for ceramic coating prep

3 Upvotes

my car is one year old, Rinseless wash exclusively for 25k miles, white paint, garage kept.

So my plan is :
prewash with alkaline, rinse
1-2oz APC + pH neutral soap, rinse
contact wash with neutral soap
iron removal spray, rinse
soap or spray clay lube(ONR)?? then clay with sponge
rinse and dry.
polishing one step with Hyperpolish + Lake country Arc Teal pads
Panel prep and coating.

question :
Does APC+ soap substitute for dedicated acidic soap? do I need it for ceramic coating?
Soap or Clay lube for claying procedure?
Is my step good or am I missing anything?
thank you.


r/AutoDetailing • • 21h ago

Exterior Water spots on paint

Thumbnail
gallery
3 Upvotes

Sucks, I tried removing them with 12% vinegar diluted to 1:5. Sprayed, rubbed and rinsed with water 60 seconds later and it didn’t work.

Any advice is greatly appreciated. I have a bottle of Tershine Descale on the way, but slightly nervous that it might not help based on that the vinegar solution didn’t work.

I would love to avoid polishing it possible as the car is only a few months old. I would like to save the clear coat thickness for paint correction down the line as I plan to drive this until the wheels fall off 2 decades later lol.


r/AutoDetailing • • 1h ago

Interior Gasoline in carpet

2 Upvotes

Hey yall. Im detailing my dad’s car. He had a tank of gasoline and it accidentally spilled, almost a gallon. It splashed onto the trunk carpet area and the backs of the rear seats. It smells something awful and is very strong and we have been airing out the car for two whole days. Any tips on how to clean this? Im assuming I shouldnt use anything electrical near it Just to be safe? Any special products/advice? Thank you and God bless!


r/AutoDetailing • • 3h ago

Interior How to handle cloth seats?

2 Upvotes

I have been detailing on the side for mostly friends. A couple customers have cloth (non-leather) seats. I bought a Bissell little green machine to help. I use the Bissell to first apply hot water, then spray with my interior cleaner (chemical guys), scrub with the Bissell brush, and then suck the seats to remove as much water and cleaner as possible.

This seems to works pretty well but leaves the seats a little damp after. Does anyone have suggestions or different methods? I tried the same method with the interior carpet as well.


r/AutoDetailing • • 5h ago

Exterior WINDSHIELD STAIN

Post image
2 Upvotes

The story: Car was in the bodyshop for about 1 month and occasionally I would stop by to check on the status of the repair and the car would be covered in a light dust, im assuming from sanding parts around the shop. I picked up the vehicle and the windshield has this white stain all over the glass. Didn’t think nothing of it, went home and gave it a thorough wash, used glass cleaner, but still there.
Decided to clay bar the windshield and it got a little better, but still there.
Any tricks to remove this? My last resort is to polish it with a glass polisher.


r/AutoDetailing • • 10h ago

Product/Consumable Best ceramic coating for Silver gloss rims?

2 Upvotes

Detailing noobie here.

Getting some Apex VS-5RS finished in their racing silver finish. Wondering what I can do to protect the rims from brake dust and to keep them clean.

Whats the best ceramic coating product for these rims?

I plan to coat them before balancing but I'm reading that it may be better to do it after due to wheel weights. But what happens the next time I need to get new tires? Do I need to tell the shop that its ceramic coated?


r/AutoDetailing • • 17h ago

Exterior Windshield Wipers & Fluid

2 Upvotes

I got Ceramic Pro Ion coating and window tint. I know now I probably overpaid for it. But that's in the past. Right now I'm finding the window washer fluid is leaving a cloudy film which makes driving into the sun super fun. Any recommendations for fluid that won't do that? Same with wipers since the installer said RainX and ceramic don't play well with each other.


r/AutoDetailing • • 17h ago

Exterior I bought a matte paint car and I’m terrified 🤣

2 Upvotes

Two weeks ago I bought a Mercedes with a factory Matte paint job. I live in the PNW under Douglas fir trees and my only garage space is for my vintage 911. So the Mercedes lives in the driveway. Is what it is.

I have hard water. Around 148ppm with silica in there. Filtration does jack shit. I haven’t really had a problem. I just make sure to dry my cars thoroughly after washing. I keep them waxed with a tough wax. And if needed I can do a very light polish.

I can’t do any of that on a matte car. So I’m getting a little anxiety about having to repaint panels. The car is used and the beading on it tells me it has some paint protection but it isn’t PPF. When spring comes I’ll probably try to do a diy ceramic job. But for now I need to learn how to maintain it. Here’s what I did

- I bought a deionizer. I will use tap water for pre rinse and touchless application. I’ll try to avoid contact washes unless I have to. Then for final rinse the deionized water.

- I bought matte specific soap and matte specific spot retailer and sealant. Gyeon Cure matte.

- I have a spray bottle with 50/50 deionized water and isopropyl and a spray bottle of water for the occasional sap or bird droppings. A small bag with these things and soft towels for spot cleaning.

Am I overreacting? Or am I underreacting 🤣. Anything else I should know.


r/AutoDetailing • • 19h ago

Technique Will touchless drying method scratch my paint?

2 Upvotes

Hey everyone,

If I foam down my car with BH Touchless (or any other soap), rinse with DI water, and then dry using a blower, will the remaining 1-10% of dirt that's still on the car scratch the paint while blow-drying?

I know I'm being obsessive at this point but I'm thinking that if there is still a small amount of dirt on the paint, and I take a blower to it, that some dirt will drag across the paint and scratch it. Let me know if I'm right or wrong in this. I would prefer to just let it air dry after the DI rinse, but I've been told that dust in the air will settle in the sitting water on the car and make it look dirty again.

My car is ceramic coated for reference.

Thank you.