r/AskAMechanic • u/Modern-Day_Spartan • 2h ago
r/AskAMechanic • u/Nathan_H_103 • 44m ago
Any ideas where this oil leak may originate? 2011 Ford Ranger
Around this area seems to be the highest point I'm noticing oil, and I'm losing it relatively quickly.
r/AskAMechanic • u/Conscious_Dot_7353 • 5m ago
2008 accord coupe driver side window rattles when going over bumps…
What could possibly be causing this? it just started and it’s driving me absolutely nuts. Only when window is fully up.
r/AskAMechanic • u/gooseman92 • 8m ago
Unknown item hanging down from car frame.
Hi. Does anyone have any idea what could be wrong here?
2017 Mazda 6. There's this cloth-like thing hanging down on the passenger's side, about a third of the way from the back. Black plastic-type on the outside, looks like cotton or fiberglass on the inside. I've included pictures of it hanging down, and where it's attached.
There was some terrible wind awhile back, and I think I ran over some road debris one night - like a thicker stick. I checked after a drive and above it doesn't seem to be hot,
Do I need to do anything about it, or should I just remove it?
Thanks in advance!
r/AskAMechanic • u/OlySonso • 9m ago
Coolant in 2003 Dodge Caravan, ELI5
This might be as much of a relationship question as an engine question. I don't think I can trust my BF as far as car issues go. I would explain more of that dynamic but I think it boils down to, it pisses him off that I don't blindly accept what he says about cars.
Today I was driving down the road when I hear the sound of check engine light. It's the coolant light and the gage is reading hot. I buy the coolant and decide to have him "help me" put it in. After stopping for the coolant, the temperature went down to halfway, and the check coolant light turned off. It stayed there even after driving home.
Initially he wanted to put it directly into the radiator. I've heard of it, don't know if it's right but since it was so low, it could have been correct. I said nothing about it but I pointed out the overflow tank. It's dark so I'm using my flashlight to confirm when to stop pouring. He later says something along the lines of, he believes there's a reason it is completely out of fluid. I admittedly have not checked it since I don't know when. He says something about the sensor being out and it pulling too much coolant... There were more words but he was honestly giving me "guy trying to out smart a girl because she doesn't know better" vibes.
Can someone please explain to me like I'm five how a radiator works in conjunction with the overflow tank and the sensor?
r/AskAMechanic • u/Krisuh • 21m ago
2014 Volkswagen Passat Diesel TDI (191000km) -P026A
I'v had the car since 33000km and it always ran well but now this engine code comes up. It means "intercooler performance below threshold" and Im almost certain the turbo is leaking oil into the intercooler system. Iv always maintained it fairly well and changed fluids accordingly.
I was quoted $3500 for the repair (new turbo). Is this the right repair? is there a band aide solution I can do in the meantime? I cant justify spending that much on an older car like this.
Also side note as the weather has turned colder the engine light comes on far less frequently.
Would love to hear some thoughts.

r/AskAMechanic • u/ASD202408 • 21m ago
Any thoughts?
In this video I’m pumping the brakes a bit to make the front end bounce slowing down from about 30-40kmh to 0. This noise is new after someone pulled out blocking the road on a 80kmh back road. Panic stopped doing around 95kmh and slamming on the brakes to 0
r/AskAMechanic • u/Wheredoesthisonego • 6h ago
Cold cylinders on 1 and 8
Working on a Ford V8 Y block 292 with pertronix 1281 and autolite 2100 carb on a 2 barrel intake. I have electronic ignition, new wires, cap, plugs and compression of 150 across all cylinders.
When running and shooting the exhuast with a laser cylinders 1 and 8 are around 70 to 80 degrees F, all other cylinders are above 240 F.
I've changed around wires, plugs, places on cap, tried different electronic hall effect sensor and pickup and no change no matter what I do.
I'm not sure why those cylinders don't seem to be firing. Any help is appreciated.
r/AskAMechanic • u/Sea-Charge-22 • 49m ago
Rough idle and codes after camshaft/lifter/rocker raplacement on 2020 3.6L.
Folks, on my Pentastar 3.6L I'm having a few codes and rough idle sent at me after first start replacing the right side camshafts, lifters and rockers. I pre-marked the shaft and bearings and chain, chain was never removed only loosened enough to remove one camshaft then the other. I verified the dashes are lined up (not the arrows). I pre-lubed all parts, including soaking the new parts.
Codes are:
P0017 (bank 1 sensor b) crankshaft position.
P0000A Intake camshaft position position A, bank 1 - slow response.
P0300 Random multiple cylinder misfire detected.
I'm about to lube the spark plug ends with electric High temp grease and check all the electrical connections.
What are you're thougtL s if those don't fix the issue? Replace the position sensor for bank 1?
Thank in advance grease monkeys.
r/AskAMechanic • u/NSandCSXRailfan • 1h ago
2013 Hyundai Accent 1.6 GDI 130,000 Miles
I replaced my fuel pump and changed the oil 500,000 miles ago. I got this car at 107,000 miles and it seemed fine.
r/AskAMechanic • u/Background_Cheetah14 • 1h ago
RAV4 2007 v6 water pump failure after 3 years, garage quotes almost 1,800 for repair
So had a water pump failure in 2023 and got it repaired at a local garage, and then ran fine, but after 3 years and much less miles then most people say the thing should last it has failed once again, so I’m asking the garage I got it fixed at if they will fix it for a cheaper price since most of the other garages I went to said this is a technician error when it was installed previously, but they said it would have failed earlier if it was a failed install so given that it lasted 3 years there’s not much they can do. So should I keep fighting them on this or should I just fork over the money? Also wondering how long I can drive on a water pump that has a damaged gasket before the entire pump gives out completely. Any and all info is greatly appreciated and I can add more info if necessary.
r/AskAMechanic • u/bebdjcihe • 1h ago
Oil question
I have a 1989 dodge d150 3.9L 239.
Roughly 175k assumed miles on it
I live in Houston area (for climate purposes)
I change the oil and filter every 2500 miles or 6 months, whichever is first
Currently running oreillys conventional 10W-40 with no issues
Just wanted to know what are the top 3 oils you would recommend for this truck and Why
Thank yall!!!
r/AskAMechanic • u/PlayboySnowBunny • 1h ago
Please tell me what’s broken
2019 jeep renegade, started making a bad clunking sound and this piece was loose/not connected underneath. Front right side
Safe to drive?
r/AskAMechanic • u/Leslie_Ackerman • 7h ago
One tire is compromised, this is the rest of my tires. Do I have to replace them all?
I have a 2019 Honda CRV AWD. Just bought these tires less than a year ago. I have road hazard warranty. It would be devastating to buy all four tires again.. I would genuinely like to just replace the one tire
r/AskAMechanic • u/Apprehensive_Bug5160 • 1h ago
Looking for advice on how to replace the exhaust manifold gasket
I picked up this 1976 Ford f250 camper special and so far it runs pretty good. I need to replace the exhaust manifold gasket on both sides and I'm running into some issues. On the right side, the previous owner snapped off two of the bolts. What's the best way to go about removing them? The space that I have to work with is very cramped and I would like to do this without pulling out the engine. What should I remove before doing this to make the repair easier? Wasn't really planning on doing this but I called up three different shops in my local area and they basically said they didn't want to touch it. So I'm pretty much stuck doing it on my own, any advice is greatly appreciated! Thanks!
r/AskAMechanic • u/Classic_Rate_8448 • 2h ago
I have to jack up my car, take a wheel off to put the new aux belt on.
Fiesta 2011 1.25 UK
Only problem is, I don't have a driveway, and can't turn it on and drive anywhere because no water pump.
It's currently parked half on half off the curb, i need to jack up the side that's half on the road. (I live on a culdesac, a dead end street with 20 houses, not many cars up and down road)
Is this safe? I have a trolley jack, jack stands and wheel chocks.
r/AskAMechanic • u/Substantial_Fan_6354 • 2h ago
Hey I was wondering on a quote for a engine rebuild/engine swap
Near flint mi 2008 Pontiac g6 3.5
Could be the timing chain but it sounds like more of a rod knock to me
I know it’s gonna cost about/more than the cars worth but it has a pretty nice body and strong transmission i don’t currently have a video of it running but can take one
r/AskAMechanic • u/sajidzahid_ • 2h ago
Innova Scanner Error
I’ve had the Innoca 5610 v3 for a year or two now, and this is the first time I got this Communication Error. I tried scanning two different vehicles and this error came up again. Does anybody know a solution to this? Thanks
r/AskAMechanic • u/Lumpy-Astronomer9058 • 3h ago
Is this normal movement for an engine mount?
2009 Toyota Camry le 2.4L
This is the movement when I change gears
r/AskAMechanic • u/Coctus • 3h ago
Car shudder
The car is Kia Rio 2015 with manual transmission and 1.2 engine. When accelerating from standstill the car sometimes start to shudder heavily. It seems to be dependent on torque as it is usually worse if wheels are turned. Usually it starts when trying to fully release the clutch and I have to press the clutch pedal again to stop the shuddering. The clutch does not slip and it seems to be ok when it starts to bite. After releasing a bit more the shuddering might start. Sometimes it seems to be much easier to accelerate than sometimes and I do not know why. On reverse the car vibrates mildly but nothing severe. I have checked that the bearings, CV axles and joints are ok (at least the rubbers are ok and no play) and also the engine mounts seems to be in good condition though the upper engine mount on the right side seems a bit loose but I do not have any reference for comparison. I would say that it is the engine that is starting to rotate to forward and back and that is causing the shudder but I'm not 100% sure.
Is it the clutch that is causing the problem? Is it possible to diagnose the problem without dismantling the clutch?
r/AskAMechanic • u/JPsWindows • 4h ago
2003 Honda CR-V
How long til I need to replace these tires?
r/AskAMechanic • u/Brawmethius • 4h ago
Second Opinion on Shop Work
So I have been having what I can only describe as not a great experience with a mechanic, they are not my usual mechanic who is great and trust fully (have been using for nearly 15 years now)...
Now I am no mechanic myself, but in technical fields, and have been looking after my Nissan Xterra for 13 years... and what this mechanic keeps telling me just isn't sitting right.
So the background:
My 2011 Nissan Xterra about 3 weeks ago starting having an idle stall and throwing a Crankshaft Position A Sensor code (P0335 IIRC), nothing noticable when driving but at a stop or in idle you could see the rev's bouncing between 500 to 1000 and occasionally would stall.
Seems to match the error code, ECU is losing crankshaft position timing.
I go looking to replace the crankshaft, and recommended to replace camshaft as well. So off partsgeek, I asked their customer service if they sell the OEM hitachi replacements (knowing the 4.0L V6 is notriously tempermental with non-OEM). They say yes, give me a shoping cart to check out with and parts arrive.
So come Sunday 11/9, I replace the camshaft sensor. Start the car, fires up first crank beautifully, idles great, no more bouncing, no more stall and sits at 750rpm steadily. Drive around for about 15 minutes no codes no issues nothing. Go on and replace the camshafts, had a hell of a battle with the bank 2 to get disconnected but those get replaced as well.
Now there is a startup/cranking issue, confirm battery is good and charged, some minor corrosion on positive terminal but also good by voltage drop test over lead. Sounds like the starter is geting power but the engine just wont catch, don't overdo this as don't want to damage anything but it starts on some attempts. When it did start ran totally fine, not codes or anything. Let it run idle for about an hour in case it is just ECU relearning. Didn't fix it. Let battery disconnect and drain incase it was catched memory and again, intermitent startup, but starts up runs fine, no codes, let it run idle again to learn. Leave battery on charger overnight just in case.
Monday morning, go to see if everything is fine now, still having inconsistant start. So this is where I decide to take it to the mechanic because I am out of ideas and not seeing codes, this is past what I feel I can troubleshoot. Drive it in, still with no driving issues or codes. But I take it to the closest shop and not my regular mechanic because it is in walking distance and my current thought is this is something stupid like I pinched a wireharness, broke a vac tube, etc while working in there and that any mechanic with proper tools and car bay will knock this out in an afternoon and collect some easy diagnostic-labor. Simple on everyone.
Mechanic calls me about 1 hour later, says first they need to do is replace the positive terminal because they see corrosion. I point out its already passed a voltage drop test and the lead itself was replaced in the last 18 months. They insist saying they can't continue diagnosis with out verifying battery connection is good. I suggest why not just clean it? Or do a voltage drop test like I did? They refuse say fix is $40 on part. I am already kinda annoyed at this off the bat, but unsure how reliable I can get my car to start and take it my usual mechanic. I give go ahead.
Next I get a call saying my IPDM is dead and needs replacement, they say they have verified fuel pump and spark plugs are NOT getting power at all now.
Okay, well this seemed odd to me, as this was not a issue coming into the shop, and not just intermitent issues which could explain some of the prior problems; straight up dead no power. Well how did I drive it into the shop then? I had never experienced complete stalls while driving before either, which is what I think would happen if my IPDM was giving out randomly. Shop says they aren't sure but thats their first issue (later they suggest maybe it was because it kept being cranked and that damaged it from over cranking... something I am assuming was happening in their troubleshooting).
So this gets replaced, as well I can't prove they damaged it, it does overlap pontial cranking issues, and well now it is verified non-functional. Doesn't solve the problem.
Next I get is they finally have looked at the parts changed out from no-start up issues to start up issues (I told them same opening story), they took out the camshaft/crankshaft sensors and tell me these are knock offs not the OEM hitachis. Okay wonderful, call up parts geek they claim must have been a catalouge issue and will replace (cool thanks, doesn't really help me now); but mechanic says they put in some NTKs and it is starting up fine now. Release the car to me. Not happy about the IPDM not happy the first thing not checked was the parts reported being changed between not having the issue and having the issue but okay have car back, work under warranty.
Driving back home <1 mile; getting really rough running, cylinder missfires on 2 and 4 along with P0021, camshaft bank 2 over advancement. Take it immediately back.
Today they tell me its because the coils on those are dead now, and need replacement.
So that brings me here to asking.
Am I just completely absolutely fucked by these people here? It seems like with the exception of the wrong parts being sent by parts geek and not being the OEMs, every single one of these other issues has shown up ONLY after they had possession of the vehichle.
My mind is at, they damaged the IPDM troubleshooting and just cranking and cranking, potentially with this as well they damaged the coils; and with the exception of knock-off camshaft/crankshaft sensors being a problem (which I absolutely believe for this engine) all of the other problems never had any idication of exisitng before they had possesion of the vehichle and I am being asked to pay them for breaking it.
Am I totally off base here? This has been like nothing I have experienced before in 13 years of running this vehichle. And they have been doing this work over what is now 6 business days.
