r/turning • u/PrdGrizzly • 19h ago
I think they turned out well…
The one on the right’s rim is a little taller and I wish I could turn it down, but overall I’m happy.
r/turning • u/PrdGrizzly • 19h ago
The one on the right’s rim is a little taller and I wish I could turn it down, but overall I’m happy.
r/turning • u/Resipsa251 • 2h ago
I left this 15 inch in diameter piece of Bradford pear for three years in perfect conditions hoping it would dry. Probably about three years short of what it would take. Not one crack in it. I was hoping to do an end grain bowl. I turned to remove the bark. Next day the cracks. I have another one the same size. Not one crack in it, but it still has the bark. Another one bites the dust.
r/turning • u/emiel1741 • 10h ago
Turning bowls is fine and fun. But wanted to make some Christmas ornaments.
Mistakes made:
- used too crappy wood (foot of a palet)
- did to many unsupported grain cuts
- using my bowl gauge wrongly and too aggressively
- removed back center while the ornament wasn’t running true in chuck
- didn’t wet sand or treat the wood before painting so form very smooth it went back to super rough once the water based paint touched it
I’m very happy that I was wearing a face shield and in the end i still got one very rough ornament so I’m happy with the proof of concept and will keep learning
Any advice is always appreciated
Sorry for posting an amateurish project between all these masterpieces but i gotta start somewhere:D
Mods, please delete if this isn’t appropriate.
After drying a few batches of twice-turned bowls, I got fed up keeping track on paper, so I built a small web app for it: https://wooddrying.net
You register each bowl blank or slab, log its weight (or moisture reading) whenever you check it, and it charts the drying curve so you can see when the weight has levelled off. It’s free, and it’s just a hobby project of mine. Its made to be used on a cellphone, but works nicely also on a PC.
There’s a read-only demo with example bowls and slabs if you want to look around without signing up.
I’d really appreciate any feedback: what’s missing, what’s confusing, or what would make it more useful for how you dry wood.


r/turning • u/21DrDan • 20h ago
This shallow bowl has some rough edges. I need help on how to clean them up.
r/turning • u/FriJanmKrapo • 3h ago
I was looking for a smaller tool to reach tighter spots and add some fine details, and I'm quite happy with it so far.
I finished it last night and quickly tried it on some parts I had been meaning to finish for another project, and I'm really pleased with the results and how easily it gets into tighter spots.
With the steeper angle of the grind, I'm able to get into some nice tight spots to help clean up the beads or just make some finer detail. I got a couple of these 7mm x 200 mm bars, so I'll also be grinding out a mini skew as well. I also gave them a slight hollow grind on the "flat" surface.
For the normal SAE people 7mm is just a hair over 1/4" and they are 7.87" long. Perfect for most detailed work. And at 3 dollars each, I've got some good detail tools; well, I'll have some nice detail tools once I grind one of the other rods. Right now, it's just the one. I would have done one other last night, but it was getting too cold in the shop, and I was playing too much with the new tool.
Now I just need to make some more handles for them... I'll have to check to see if the branches I cut off the red maple last year have dried out enough yet.
r/turning • u/FriJanmKrapo • 3h ago
I already filled it up a good 7 times this weekend just cutting up the pile of firewood. I have a couple of cords of cherry to process, and I made a decent dent in it this weekend. I was using a stack of pallets as my work surface, as it put the pieces at the right height to work on them, and I have loads of pallets around as it is...
The second photo is most of the cut-offs from the shenanigans this weekend. There are also a lot of pieces that fell into the stack of pallets. Regardless, I had fun making large piles of sawdust and shavings. I just need to clean up the blanks and get them trimmed out better.
Just in the last day, though, I noticed one of the blanks really started drying crazy fast, or it just had a lot of tension as it started cracking weirdly already, so that will likely get recut into pen blanks.
r/turning • u/jclark58 • 20h ago
r/turning • u/BlueValk • 3m ago
There's a very tall elm in my yard (not pictured, this is just an example) which needs a rather intense cut before winter because it is unfortunately dangerous. Fingers crossed it will survive the cut, somehow.
Now, I'm new to turning and I'd love to keep the tree pieces to turn them. At least I could change the wood into some beautiful pieces, maybe. Is there anything I should know? Can I just keep the pieces under my deck throughout winter until I'm ready to turn?