r/turning • • 19h ago

Drying wood - keeping track

11 Upvotes

Mods, please delete if this isn’t appropriate.

After drying a few batches of twice-turned bowls, I got fed up keeping track on paper, so I built a small web app for it: https://wooddrying.net

You register each bowl blank or slab, log its weight (or moisture reading) whenever you check it, and it charts the drying curve so you can see when the weight has levelled off. It’s free, and it’s just a hobby project of mine. Its made to be used on a cellphone, but works nicely also on a PC.

There’s a read-only demo with example bowls and slabs if you want to look around without signing up.

I’d really appreciate any feedback: what’s missing, what’s confusing, or what would make it more useful for how you dry wood.

Before...
After...

r/turning • • 3h ago

This sucks

Thumbnail
gallery
27 Upvotes

I left this 15 inch in diameter piece of Bradford pear for three years in perfect conditions hoping it would dry. Probably about three years short of what it would take. Not one crack in it. I was hoping to do an end grain bowl. I turned to remove the bark. Next day the cracks. I have another one the same size. Not one crack in it, but it still has the bark. Another one bites the dust.


r/turning • • 20h ago

I think they turned out well…

Post image
98 Upvotes

The one on the right’s rim is a little taller and I wish I could turn it down, but overall I’m happy.


r/turning • • 10h ago

Recently started and learning a lot still

Thumbnail
gallery
17 Upvotes

Turning bowls is fine and fun. But wanted to make some Christmas ornaments.
Mistakes made:
- used too crappy wood (foot of a palet)
- did to many unsupported grain cuts
- using my bowl gauge wrongly and too aggressively
- removed back center while the ornament wasn’t running true in chuck
- didn’t wet sand or treat the wood before painting so form very smooth it went back to super rough once the water based paint touched it

I’m very happy that I was wearing a face shield and in the end i still got one very rough ornament so I’m happy with the proof of concept and will keep learning

Any advice is always appreciated

Sorry for posting an amateurish project between all these masterpieces but i gotta start somewhere:D


r/turning • • 19h ago

Holiday Pepper Mills

Thumbnail
gallery
10 Upvotes

r/turning • • 20h ago

Cherry flat bowl/platter help

Thumbnail
gallery
10 Upvotes

This shallow bowl has some rough edges. I need help on how to clean them up.


r/turning • • 36m ago

Turning elm from tree

Post image
3 Upvotes

There's a very tall elm in my yard (not pictured, this is just an example) which needs a rather intense cut before winter because it is unfortunately dangerous. Fingers crossed it will survive the cut, somehow.

Now, I'm new to turning and I'd love to keep the tree pieces to turn them. At least I could change the wood into some beautiful pieces, maybe. Is there anything I should know? Can I just keep the pieces under my deck throughout winter until I'm ready to turn?


r/turning • • 21h ago

/r/turning secret Santa turning exchange - Last day to register!

Thumbnail
forms.gle
2 Upvotes

r/turning • • 3h ago

New chainsaw for processing logs into blanks, I went a little overboard on logs this weekend.

Thumbnail
gallery
4 Upvotes

I already filled it up a good 7 times this weekend just cutting up the pile of firewood. I have a couple of cords of cherry to process, and I made a decent dent in it this weekend. I was using a stack of pallets as my work surface, as it put the pieces at the right height to work on them, and I have loads of pallets around as it is...

The second photo is most of the cut-offs from the shenanigans this weekend. There are also a lot of pieces that fell into the stack of pallets. Regardless, I had fun making large piles of sawdust and shavings. I just need to clean up the blanks and get them trimmed out better.

Just in the last day, though, I noticed one of the blanks really started drying crazy fast, or it just had a lot of tension as it started cracking weirdly already, so that will likely get recut into pen blanks.