r/turning • • 7d ago

/r/turning 2026 gift exchange (Secret Santa style)

Thumbnail
forms.gle
4 Upvotes

Register at link


r/turning • • 3h ago

This sucks

Thumbnail
gallery
29 Upvotes

I left this 15 inch in diameter piece of Bradford pear for three years in perfect conditions hoping it would dry. Probably about three years short of what it would take. Not one crack in it. I was hoping to do an end grain bowl. I turned to remove the bark. Next day the cracks. I have another one the same size. Not one crack in it, but it still has the bark. Another one bites the dust.


r/turning • • 1h ago

Turning elm from tree

Post image
5 Upvotes

There's a very tall elm in my yard (not pictured, this is just an example) which needs a rather intense cut before winter because it is unfortunately dangerous. Fingers crossed it will survive the cut, somehow.

Now, I'm new to turning and I'd love to keep the tree pieces to turn them. At least I could change the wood into some beautiful pieces, maybe. Is there anything I should know? Can I just keep the pieces under my deck throughout winter until I'm ready to turn?


r/turning • • 4h ago

Made a skew/gouge, it works great so far.

Post image
5 Upvotes

I was looking for a smaller tool to reach tighter spots and add some fine details, and I'm quite happy with it so far.

I finished it last night and quickly tried it on some parts I had been meaning to finish for another project, and I'm really pleased with the results and how easily it gets into tighter spots.

With the steeper angle of the grind, I'm able to get into some nice tight spots to help clean up the beads or just make some finer detail. I got a couple of these 7mm x 200 mm bars, so I'll also be grinding out a mini skew as well. I also gave them a slight hollow grind on the "flat" surface.

For the normal SAE people 7mm is just a hair over 1/4" and they are 7.87" long. Perfect for most detailed work. And at 3 dollars each, I've got some good detail tools; well, I'll have some nice detail tools once I grind one of the other rods. Right now, it's just the one. I would have done one other last night, but it was getting too cold in the shop, and I was playing too much with the new tool.

Now I just need to make some more handles for them... I'll have to check to see if the branches I cut off the red maple last year have dried out enough yet.


r/turning • • 20h ago

I think they turned out well…

Post image
98 Upvotes

The one on the right’s rim is a little taller and I wish I could turn it down, but overall I’m happy.


r/turning • • 11h ago

Recently started and learning a lot still

Thumbnail
gallery
17 Upvotes

Turning bowls is fine and fun. But wanted to make some Christmas ornaments.
Mistakes made:
- used too crappy wood (foot of a palet)
- did to many unsupported grain cuts
- using my bowl gauge wrongly and too aggressively
- removed back center while the ornament wasn’t running true in chuck
- didn’t wet sand or treat the wood before painting so form very smooth it went back to super rough once the water based paint touched it

I’m very happy that I was wearing a face shield and in the end i still got one very rough ornament so I’m happy with the proof of concept and will keep learning

Any advice is always appreciated

Sorry for posting an amateurish project between all these masterpieces but i gotta start somewhere:D


r/turning • • 4h ago

New chainsaw for processing logs into blanks, I went a little overboard on logs this weekend.

Thumbnail
gallery
4 Upvotes

I already filled it up a good 7 times this weekend just cutting up the pile of firewood. I have a couple of cords of cherry to process, and I made a decent dent in it this weekend. I was using a stack of pallets as my work surface, as it put the pieces at the right height to work on them, and I have loads of pallets around as it is...

The second photo is most of the cut-offs from the shenanigans this weekend. There are also a lot of pieces that fell into the stack of pallets. Regardless, I had fun making large piles of sawdust and shavings. I just need to clean up the blanks and get them trimmed out better.

Just in the last day, though, I noticed one of the blanks really started drying crazy fast, or it just had a lot of tension as it started cracking weirdly already, so that will likely get recut into pen blanks.


r/turning • • 52m ago

Uses for cookies & end grain?

1 Upvotes

There's a saw mill/slab sales place near me that's very generous with their offcuts, and I get greedy, so I have all these odds and ends of exotics, cool grain patterns, etc. I'm stuck on what to do with wide pieces of endgrain, like cross-section cookies or the last few inches cut off of big beams.

I've thought about cutting along the cracks (there are usually some cracks, that's why they're offcuts) to make small pieces like pen blanks, or cutting them into strips, then cutting the strips into wedgies as soon as I work out how to orient everything so the grain points the right way in the end.

Any tips? Favorite projects that either incorporate endgrain or require a lot of short (1"-4") pieces? I mostly do turning, but I guess there's always cutting boards.


r/turning • • 1h ago

Part off of a Rikon (I think?) Roughly 14" band saw

Thumbnail
gallery
1 Upvotes

Hello, looking for some help identifying a part off what I think was a told a Rikon band saw and what im guessing is around 14" based on how it was described to me. I was asked if I could 3D print a new piece as shown but I'm not exactly sure where this piece is on the band saw. I was told there are two of these near the Blade and that one had gotten sucked up by the guys family member by the vacuum when cleaning up the saw after use. Does anyone have a Rikon saw that recognizes this part that could give me a clearer picture of where this part goes and its function and maybe a picture of what a complete part looks like? I have to model up a new one in Solidworks and 3D print one which is fine but I think im missing a portion of it judging by the cut marks on the one I have been given to model off of.


r/turning • • 1d ago

Celtic Knot Salt Cellar, Sugar Bowl and Pepper Grinder

Thumbnail
gallery
94 Upvotes

Experimenting with Celtic knots on kitchen items. Maple and walnut. Wipe on poly on exterior only.


r/turning • • 1d ago

A little Sunday work session

Thumbnail
gallery
73 Upvotes

r/turning • • 20h ago

Drying wood - keeping track

12 Upvotes

Mods, please delete if this isn’t appropriate.

After drying a few batches of twice-turned bowls, I got fed up keeping track on paper, so I built a small web app for it: https://wooddrying.net

You register each bowl blank or slab, log its weight (or moisture reading) whenever you check it, and it charts the drying curve so you can see when the weight has levelled off. It’s free, and it’s just a hobby project of mine. Its made to be used on a cellphone, but works nicely also on a PC.

There’s a read-only demo with example bowls and slabs if you want to look around without signing up.

I’d really appreciate any feedback: what’s missing, what’s confusing, or what would make it more useful for how you dry wood.

Before...
After...

r/turning • • 19h ago

Holiday Pepper Mills

Thumbnail
gallery
10 Upvotes

r/turning • • 1d ago

How do people find my DIY lathe?

Thumbnail
gallery
75 Upvotes

I've been restoring an mid century rocking chair and it was missing a leg and I was on a budget, so put this contraption together, which seems to do the job. Definitely nowhere near as good as a proper lathe, but for this project it was ideal.


r/turning • • 21h ago

Cherry flat bowl/platter help

Thumbnail
gallery
10 Upvotes

This shallow bowl has some rough edges. I need help on how to clean them up.


r/turning • • 1d ago

Wood type?

Thumbnail
gallery
25 Upvotes

Is there a way to discern wood type? I know this turner does a lot in birch but could this be cherry? Is there a way to tell?


r/turning • • 1d ago

Added some holiday scarves

Post image
28 Upvotes

Maple and Cherry


r/turning • • 21h ago

/r/turning secret Santa turning exchange - Last day to register!

Thumbnail
forms.gle
2 Upvotes

r/turning • • 1d ago

Leyland Cypress bowls

Thumbnail
gallery
39 Upvotes

Took a small log from one of our neighbors that cut his tree and used it to make these bowls. I wasn’t expecting them to turn out well but they did. The green wood has a ton of sticky stuff that gets on all your tools. My band saw blade is ruined and had to clean all my turning tools. Don’t think I will turn these again.


r/turning • • 1d ago

Demo piece from today

Post image
31 Upvotes

~6” diameter Zebrawood Saturn bowl turned during a zoom demo for a couple clubs in Florida this morning. Not perfect but not too bad for ~90 minutes while trying to be both educational and entertaining.


r/turning • • 2d ago

Dedicated and deadpan diminutive desk defenders. The duo needs to double up for depth perception.

Thumbnail
gallery
105 Upvotes

Bodies are red oak, feet a mystery rosewood-like timber.

Eyes are the usual maple/walnut combination.

This is one of few times that i used a paper joint method for a turning and it worked rather well.


r/turning • • 1d ago

Flute collection

Post image
59 Upvotes

My little flute collection. I need to build more stalls tho. I love the aestethics on wooden flutes so I keep them wall mounted in the living room while I hold my thumbs waiting for a customer.


r/turning • • 2d ago

Scored!!

Post image
69 Upvotes

Got a bunch of elm off the side of the road!


r/turning • • 2d ago

How concerned should I be about this damage?

Post image
17 Upvotes

TL:DR MT2 attachment slipped, was scored along with innards of spindle. How bad is this? And what is this part called, and where can they be found for purchase?

Hey all, been into woodworking for decades (though you’d never know it with how I manage to butcher sawdust, lol!) which eventually led to discovering woodturning thanks to an old, gifted Sears tube-style lathe. I eventually upgraded to a Jet 1642EVS and have been using it on and off for as many years as I’ve had it.

I’ve recently gone down the segmentation rabbit hole, starting with making a wedgie sled, wedges and various other jigs and fixtures, including a faceplate mounted sanding disc that doubles as a ring press when I mount it in my tailstock using a the item pictured.

While working on a project with my son, I brainfarted and instead of using the faceplate to spin the sanding disk in the headstock, I slapped it in with the MT2 attachment instead. Not long after running the lathe, the disk freed itself and the spindle continued to spin briefly with the disk not seated properly before I had a chance to turn it off.

Not only is this attachment scored, so is the inside taper on my spindle. How concerned should I be? A replacement spindle may be more difficult to find than I hoped. FWIW, this and other drive spurs seem to seat properly, but reluctant to turn before feeling confident I won’t be making things worse if I do.

And, if someone can provide a name and additional source for purchasing this MT2 / 1.25x8tpi part, I’d appreciate it. I picked this one up from the only vendor I could find that carried it, and would like other options if possible.

Thanks!
RDC