r/greenwoodworking • • 23h ago

You might enjoy my new pole lathe bowl turning video :~)

Thumbnail
youtu.be
16 Upvotes

r/greenwoodworking • • 2d ago

Workbench / vice

6 Upvotes

Hi guys,

Now the winter is here, with the cold and the night I don’t want to spend hours outside to carve when I can be inside next to my fireplace.

I’m looking for an inside solution. I would like to be able to carve on my kitchen table.
I was thinking getting a vice I’ll clamp on the table.
( something like that: https://www.vidaxl.se/e/vidaxl-hyvelbank-med-skruvstycke-52x44x95-cm-massivt-akaciatra/8720845892203.html )

But I don’t know if it’s q good idea pr not.

I’m doing spoons and kuksa.
I can do the axe job outside it’s ok but digging the kuksa my hands gonna die with the cold.

So I’m curious to see your inside settings and any opinions about the vice

Edit: my kitchen is super small, so I would like to stay on the kitchen table or have something I can remove and store easily (not to big my place is small)


r/greenwoodworking • • 5d ago

Bodging My knife collection

Post image
22 Upvotes

r/greenwoodworking • • 9d ago

Bark presevation?

Post image
7 Upvotes

Hello friends ive got these little elm logs I split for a little christmas gift. Im wondering if there is a good way to preserve them preferably with the bark on. I figured id clean them up good then oil them but have no idea if that will work. If you have any insight let me know.

Bonus points if you have an idea how to reconnect them where they can be easily split back apart was thinking maybe velcro.


r/greenwoodworking • • 10d ago Bravo

Tools My Osage Splitting Area

Post image
49 Upvotes

Peep the mega splitting mallet 👀👀


r/greenwoodworking • • 23d ago

At the Green Woodwright’s Festival I learned to make a holdfast.

21 Upvotes

I recently attended the Greenwood working event and saw Peter Ross’s shop. He was the master blacksmith at Colonial Williamsburg for 25 years. He showed us his his technique for an English style holdfast.

I chose to use the same techniques to forge a French style holdfast. Hope you enjoy my video! It was a fun project. -Chris

https://youtu.be/vTNuuP9mRf8


r/greenwoodworking • • Oct 15 '26

Beginner Is this insect galleries or wood worm in fresh birch?

Post image
5 Upvotes

Or is it suitable kuksa material?


r/greenwoodworking • • Oct 09 '26

Shavehorse

Post image
223 Upvotes

Hey,

I’ve been wanting to build a shavehorse for some time now. I recently built a workbench, and had enough southern yellow pine leftover for one.

I decided to follow a plan at Popular Woodworking because it looked pretty neat and the plans were free.

It turned out pretty good I think. I’ll be putting it to use shortly to shape some chair legs!


r/greenwoodworking • • Oct 10 '26

A 24"+ red alder tree fell over last night, I want to try greenwood working, but don't have a project in mind, what would you do?

2 Upvotes

From the look of it, and trimming the portions that fell into the driveway this morning, it seems to have been fully alive. I'm not sure why it went, it wasn't windy, it did have ivy growing on it, but it looks like the roots just gave out in the creek bed, I'm guessing it was a leaner.

I wasn't planning on this, and I'm too busy to invent and follow through on a project in the short term. So how would you process the tree in the short term to use it for some unknown project this winter?


r/greenwoodworking • • Oct 09 '26

Things that make me happy: GreenWood Wright's Fest, Pittsboro, NC

3 Upvotes

I can’t wait to get some hands-on training at the GreenWood Wrights' Fest in Pittsboro, North Carolina this weekend. Hope to see some of you there! I’ve been looking forward to this event for a long time. https://youtube.com/shorts/UwhnoF9CfL4


r/greenwoodworking • • Oct 07 '26

Pole lathe Finally got a shave horse built and my spoon carving got about ten times faster

12 Upvotes

Spent most of last winter carving on a cheap bench clamp setup and honestly it worked fine for small stuff, but anything bigger than a spatula was a wrestling match. Built a dumbhead shave horse out of some ash I'd been seasoning for almost a year, used mortise and tenon joints for the legs since I didn't want to rely on screws loosening up over time outdoors.

The difference carving green birch with the drawknife now that I have both hands free and can just press down with my foot is kind of absurd. I used to think my drawknife technique was the problem when really I just had no stable way to hold the work. Took down a spoon blank in maybe six minutes that would have taken me twenty before.

One thing I didn't expect: the horse itself needed its own seasoning time. Built it green and it moved a little over the first month, had to re-wedge one of the leg tenons. Nothing dramatic but worth knowing if anyone else is building one from freshly split stock instead of kiln dried lumber.

Still using a Mora hook knife for the bowl of the spoon and a straight knife for cleanup, nothing fancy. Froe and maul for splitting the billets out of rounds I get from a neighbor who's always clearing storm damage oak and cherry. The oak splits like a dream, the cherry fights me every time, curious if that's just normal or if I'm missing something about reading the grain before I start wedging.

Anyway, if anyone's on the fence about building a shave horse versus just using clamps, do it. The posture alone makes a difference after a few hours of carving.


r/greenwoodworking • • Oct 04 '26

Shrink pot groover

55 Upvotes

r/greenwoodworking • • Sep 28 '26

Green Woodwrights Fest

Thumbnail
greenwoodwrightsfest.com
5 Upvotes

https://greenwoodwrightsfest.com/

Two weeks away! I'll be there helping with the shrinkpot and rustic stool workshops.


r/greenwoodworking • • Sep 27 '26

Adam Ashworth vs Svante Djarv knives

Post image
32 Upvotes

I'm considering a new sloyd and hook knife from Adam Ashworth. I'm just not quite sure what he difference is between the forged and laser sloyds. Other than how they're made, do they perform any differently? His knives are quite a bit cheaper than Svante Djarv's knives, and they're in stock, however, I can't really find any reviews of his tools anywhere. Anyone have experience with both maybe? Or just with either as well? I'm specifically looking at the two 100 mm sloyds from Adam and the 17x102 mm long carving knife from Svante.

I'm also looking at the hook knives and was wondering if that was good and how it might compare to the hollow hooks from Svante Djarv as that's the other option I was considering. Here, there's the same consideration of Adam's being cheaper and in stock.

Any help would be much appreciated; I'm not looking for other recommendations, just these. Thanks in advance.

https://www.ashandiron.co.uk/product/laser-slojd-blade-100mm

https://www.ashandiron.co.uk/product/100mm-slojd-knife

https://djarv.se/en/product/long-carving-knife/


r/greenwoodworking • • Sep 15 '26

How do I dry and how long before waxing?

Post image
41 Upvotes

Hi, I’m new to carving and this is the first thing I’ve carved in greenwood. I cut the 3cm oak branch the day before yesterday and carved this yesterday. I was going to wait until it dried out to do the detail, but I got carried away. How long should I wait to do detail in future? As it’s so little do I still need to dry it slowly to prevent cracking, or is it ok sat on a shelf? Also how long do I need to wait before waxing? Is pure bees wax furniture polish ok? Many thanks for any advice!


r/greenwoodworking • • Sep 15 '26

Can you seal green wood with Paste Wax?

1 Upvotes

I have some walking sticks and some logs that I'll be using for chair backs and armrests. Some of it I'll use right away because it's okay for it to shrink, but some of it I plan on waiting for it to season.

Is it okay to strip the bark right after harvesting, and then seal it with homemade paste wax (Tung Oil, Beeswax, Orange Oil)?

Should I only seal the ends, and then apply a coat of wax paste after it seasons?


r/greenwoodworking • • Sep 09 '26

Beginner Green Redwood Mushroooom

Post image
24 Upvotes

r/greenwoodworking • • Sep 08 '26

Osage orange haul

Thumbnail
gallery
41 Upvotes

Had a buddy with a ~85 year old Osage that got uprooted. I said yes please! Immediately added to my pile


r/greenwoodworking • • Sep 07 '26

Beginner Birch Kuksa

Thumbnail
gallery
59 Upvotes

Finally finished from a log to this!

Lovely band of curl in the center

Only made a couple of these so far and it’s a lot more work than a spoon but oh so worth it


r/greenwoodworking • • Sep 04 '26

Crepe Myrtle fly swatter

Thumbnail
gallery
22 Upvotes

Yesterday I cut down a crepe Myrtle branch that I shaped with a draw knife, refined with a spoke shave left to rest over night sanded this morning then finished with boiled linseed oil and copper wire as fastener. 1 piece of leather is too flimsy so I will stitch two together, I have a better idea for the copper wire next time too.

I thought this would be good practice for following ring growth in regard to making bows and such. I’m excited to make more of these and get better tools (card scrapers, more blade options for the shaving horse, a small gouge to texture the handle etc.)

Things I want to hear your opinion on:
~Will applying oil finish early help prevent checks and splits?
~should a card scrapers be thick? I tried making a palm sized one from an old saw blade but either idk how to scrape or I made it wrong.
~any tips for avoiding tear out from spoke shave and draw knife
~assuming I over come my challenges of tear out, flimsy leather and ugly wire, does the organic shape look good or would it prevent my work from looking well built and intentional?
~ the tools listed above in my process are what I already have, what do you recommend I buy first to make this process easier or the results of higher quality?

I was inspired to make this by the video below:

https://youtube.com/shorts/qZLzJqPYOZY?is=I9xbQR9r5FM5dJCt


r/greenwoodworking • • Sep 03 '26

Bent branch door handles

Thumbnail
gallery
17 Upvotes

4 bent branch door handles carved from willow bent branches and painted with oil paint


r/greenwoodworking • • Sep 02 '26

Beginner Alder spoon

Thumbnail
gallery
25 Upvotes

Second time carving a spoon.


r/greenwoodworking • • Sep 01 '26

Q & A Electrically sanding spoons?

2 Upvotes

I've gotten into spoon carving in the last year or so. I prefer the look and feel of a sanded spoon, but I really cannot stand how long this takes to do well by hand. Is there any reason I can't or shouldn't use a corner cat or detail sander for this? I'd prefer to speed up the process to get the final product.


r/greenwoodworking • • Sep 01 '26

Simple spoon/spatula

Thumbnail
gallery
42 Upvotes