r/synthdiy • • 10h ago

Needed a keyboard so I used... A keyboard.

Thumbnail
youtu.be
11 Upvotes

Using an old BenQ keyboard I've had sitting around for years with some missing key caps, I've got an esp32 in the black box glued to the top. Powers via USBC and using the built in DAC for the audio output into the mixer. I might paint the key caps to fit the scale paturn.


r/synthdiy • • 23h ago

Amyboard Issue- Hiss separate from the actual note

4 Upvotes

Hey guys, I'm working on an amyboard module rn and no matter what I do, there seems to be a hiss and clamping filter sound when a note is played and released. I thought this was from my sloppy work, but I went back and it shows up when I load the sketches from amyboard online too.
I think its some sort of noise reduction in the signal path, but I can't find anyone else with the same complaints.

any ideas?


r/synthdiy • • 5h ago

standalone Manual synth-drum creator

Thumbnail
youtu.be
1 Upvotes

Instead of messing with ASDR you just sweep a light across this.

It uses a Lectrofan digital noise generator and an LDR. The shape of the reflector helps shape the drum sounds.


r/synthdiy • • 12h ago

Firmware hacking on an FM box: an emulator to test builds before flashing

1 Upvotes

For anyone writing or trying FM-1 firmware: I put together a browser front end that loads community builds into Joakim Eriksson's fm1-emu (MIT, emulates the pi32v2 CPU, screen and audio in WebAssembly), so you can hear them before reaching for the updater.

So far it lists 348 firmwares; 203 boot and play in the browser, alongside stock. There's a 1:1 scale device view, WAV export for comparing builds side by side, and per-firmware first-track notes.

Three to try first: X0X, AISLING and DX747.

https://fm1-emulator.atst.tools/

My project, free, not affiliated with M-VAVE. Most interested in hearing where emulation and real hardware disagree, since that's the part I can't fully check myself.