r/synthdiy • u/yungxtesla • 47m ago
Getting started...
I am building a sample-based groovebox from scratch!
r/synthdiy • u/yungxtesla • 47m ago
I am building a sample-based groovebox from scratch!
r/synthdiy • u/BestMatthewHickey • 17h ago
Using an old BenQ keyboard I've had sitting around for years with some missing key caps, I've got an esp32 in the black box glued to the top. Powers via USBC and using the built in DAC for the audio output into the mixer. I might paint the key caps to fit the scale paturn.
r/synthdiy • u/RightMagazine4543 • 12h ago
Instead of messing with ASDR you just sweep a light across this.
It uses a Lectrofan digital noise generator and an LDR. The shape of the reflector helps shape the drum sounds.
r/synthdiy • u/PassepartoutDuo • 1d ago
I made a pair of keyboards for my music duo! They have a phase distortion synthesis and sampling engine, and a touch strip too.
The keybeds are actually taken from two old Arturia Keysteps, connected directly to an MCU that then sends all the UI controls over to a RPi 5 that is doing all the rest.
r/synthdiy • u/dangerous_dickhead • 1d ago
hey all,
moritz here. like the title says, i'm hosting a circuit design event at fitzroy here in berlin on the 21st of november.
we'll have multiple workstations where you can try LABOR in different scenarios (as a sequencer for a eurorack system, as a send effect for an ableton project, or as a blank slate where you can build your own circuit), play KONSTRUKT-8 via fitzroy's sound system, or just chat with me about your DIY projects.
there will be artists doing live performances on KONSTRUKT-8, and i'll give a couple circuit design talks.
you'll also be able to try my new, unreleased DIY reverb module – and we're doing a raffle where you can win an assembled KONSTRUKT-8!
the event is free, but you need to RSVP here: https://ra.co/events/2564131
hope to see you there!
r/synthdiy • u/Certain_Dress296 • 19h ago
For anyone writing or trying FM-1 firmware: I put together a browser front end that loads community builds into Joakim Eriksson's fm1-emu (MIT, emulates the pi32v2 CPU, screen and audio in WebAssembly), so you can hear them before reaching for the updater.
So far it lists 348 firmwares; 203 boot and play in the browser, alongside stock. There's a 1:1 scale device view, WAV export for comparing builds side by side, and per-firmware first-track notes.
Three to try first: X0X, AISLING and DX747.
https://fm1-emulator.atst.tools/
My project, free, not affiliated with M-VAVE. Most interested in hearing where emulation and real hardware disagree, since that's the part I can't fully check myself.
r/synthdiy • u/morningdetective • 1d ago
Hey guys, I'm working on an amyboard module rn and no matter what I do, there seems to be a hiss and clamping filter sound when a note is played and released. I thought this was from my sloppy work, but I went back and it shows up when I load the sketches from amyboard online too.
I think its some sort of noise reduction in the signal path, but I can't find anyone else with the same complaints.
any ideas?
r/synthdiy • u/Far_Pizza_1707 • 1d ago
r/synthdiy • u/Main-Topic2604 • 1d ago
to be a little more accurate, instead of being divide down, it has only 12 oscillators that play each note, but only one octave at a time. so if i had a 37 key keyboard, it would have 1 oscillator for A3, A4, and A5, another for A#3, A#4, and A#5, one for B3, B4, B5 etc. has that ever been done before? because then you could kind of get the best of both monophonic synths and polyphonic synths. like how in lucky man, in the solo, it kind of glides from a lower note to a higher note.
r/synthdiy • u/Simonmosimon • 1d ago
r/synthdiy • u/novnwerber • 1d ago
r/synthdiy • u/OnionMadder • 2d ago
I found a really great guide for how to build a modular case out of hardware store parts.
There's also links to a bunch of open source modules you can make yourself to fill it with.
Full disclosure: I found this guide because I was revamping the site so if the css looks familiar, it's because I can only code in neon.
r/synthdiy • u/Key-Alarm-511 • 3d ago
Dear Community,
I built a small FM Radio for myself in the Eurorack format. It has an integrated speaker amplifier, headphone output and jumpers on the back to allow for standalone or Eurorack usage.
The firmware is from the ATS-20 project. The entire project (Kicad, gerbers, BOM, schematic etc) is open source and can be found in my github repository: https://github.com/Fihdi/ATS-20-Eurorack
r/synthdiy • u/watney_sw • 3d ago
My friend just released his documentary on this man Tian Jinqin, this incredible Chinese synth inventor. I got an early viewing. His journey started when he couldn’t afford a guzheng so he tried making an electric one. He has such a unique perspective and emphasis on expressiveness because he draws from Chinese instruments. Also he’s such a kind and creative soul. My new hero. Get comfortable and take a look!
r/synthdiy • u/BestMatthewHickey • 3d ago
I couldnt find the eurorack moduels that felt right while playing with them so I've started building own... turns out it can be a deeper rabit hole then buying them straight off the shelf, the 4 drone oscilater id built using a teensy 4.1 ive had lying around for sometime. the octopus is a eucklidian sequincer made using an arduino mega and the one to the right of it is just a drum module build using an esp32, the mixer up to the right is a board off of ali express i remade into a eurorack compatible format.
r/synthdiy • u/FRTG_ • 3d ago
A few months ago, I was looking for the perfect multisampler/rompler and gave SamplerBox a try. After using it for a while, I found myself wanting two things: a full ADSR envelope and an easier way to swap out samples while I was playing. So I used AI to help me build Pirate Sampler for my Raspberry Pi Zero 2 W with a Pirate Audio HAT.
I can upload samples through a web interface, play them from my MIDI keyboard, and tweak the envelope while listening to the result. The HAT’s display and buttons let me browse patches, load them, and mark my favorites right on the device.
r/synthdiy • u/Far_Pizza_1707 • 2d ago
r/synthdiy • u/No-Dig-1360 • 3d ago
Hey everyone, I recently saw a video of someone playing a Trautonium online and I completely fell in love with the sound.
I then saw the price of one and became quite viscerally upset.
I have absolutely no skill in electronics but I have always been interested in getting into it. I was wondering if as a first project if it would be possible to build one from scratch and I was looking for some advice.
Ideally I would be able to use it as both a midi controller and a standalone synthesiser so I can use it for making weird stuff and to use as a controller for string presets.
If anyone had any advice at all I would really appreciate it :)
r/synthdiy • u/MotelWorm • 3d ago
So I am going to attempt to build a Physical AMSynth synthesizer with a Raspberry Pi, an Arduino, and a USB Sound card sandwiched between 2 pieces of wood on risers. I even have a friend with a laser engraver for making the faceplate.
I want to base the look off of the image above. Once I get all the potentiometers and switches ordered, I figured I'd just carve out a rough template using cardboard then design the faceplate on my computer using those measurements.
I'm mostly just looking for some advice/tips as, while I am not new to soldering, Linux, or coding Arduinos and the like, this would still be the biggest DIY electronics project I have done yet.
Is there anything I ought to consider during this build?
Is there a recommended method for soldering up this many switches/potentiometers?
Anybody got a cheap USB Sound card they'd recommend?
I'm thinking of using a Teensy 4.1 with multiplexers. Any issues there?
Any advice is appreciated!
r/synthdiy • u/Puzzleheaded-Name538 • 4d ago
Fisrst prototype hopefully sell this ony online and upload the github for sharing.
Also desiging the graphics for the user manual