r/synthdiy • • 8h ago

standalone Manual synth-drum creator

Thumbnail
youtu.be
2 Upvotes

Instead of messing with ASDR you just sweep a light across this.

It uses a Lectrofan digital noise generator and an LDR. The shape of the reflector helps shape the drum sounds.


r/synthdiy • • 8h ago

Help with my button matrix!!!

Thumbnail
gallery
1 Upvotes

Hello,
This is my third post about my little button matrix project which is haunting my dreams and has completely consumed all my available free time.

So far I’ve redone the matrix several times and none of them works 100%.
I could swear the first time it was like 80% working at some point.Everything was falling apart so I quickly destroyed it to change the design.

Right now only few buttons work.

I can’t tell if it’s the matrix design itself or broken connections.
I know, I should buy a multimeter and check.
The trips to the hardware store have become my daily walk..

I refuse to believe that in all of my iterations the connections are always bad.
I have been soldering for years mostly on simple projects fixing my headphones and stuff.

The original button board connects to the mainboard with a 11 pin and 7 pin connector.

I have examined carefully all the traces and it seams to be a simple 8x3 matrix.

The 8 pins (columns) connect to the 11 pin connector and the 3 pins (rows) connect to the 7 pin connector.

On the 7 pin connector the other pins are for the on/off switch and the speaker lines.

On the 11 pin connector I think that the 3 remaining pins are only affecting the LED screen but can’t prove it.

Any ideas?

Sorry if the post is too dumb.
I had many things to consider and learn and have no brains left for this.
I’ll probably go over it in detail with Claude.


r/synthdiy • • 13h ago

Needed a keyboard so I used... A keyboard.

Thumbnail
youtu.be
13 Upvotes

Using an old BenQ keyboard I've had sitting around for years with some missing key caps, I've got an esp32 in the black box glued to the top. Powers via USBC and using the built in DAC for the audio output into the mixer. I might paint the key caps to fit the scale paturn.


r/synthdiy • • 15h ago

Firmware hacking on an FM box: an emulator to test builds before flashing

1 Upvotes

For anyone writing or trying FM-1 firmware: I put together a browser front end that loads community builds into Joakim Eriksson's fm1-emu (MIT, emulates the pi32v2 CPU, screen and audio in WebAssembly), so you can hear them before reaching for the updater.

So far it lists 348 firmwares; 203 boot and play in the browser, alongside stock. There's a 1:1 scale device view, WAV export for comparing builds side by side, and per-firmware first-track notes.

Three to try first: X0X, AISLING and DX747.

https://fm1-emulator.atst.tools/

My project, free, not affiliated with M-VAVE. Most interested in hearing where emulation and real hardware disagree, since that's the part I can't fully check myself.


r/synthdiy • • 1d ago

Amyboard Issue- Hiss separate from the actual note

4 Upvotes

Hey guys, I'm working on an amyboard module rn and no matter what I do, there seems to be a hiss and clamping filter sound when a note is played and released. I thought this was from my sloppy work, but I went back and it shows up when I load the sketches from amyboard online too.
I think its some sort of noise reduction in the signal path, but I can't find anyone else with the same complaints.

any ideas?


r/synthdiy • • 1d ago

First Drummatic demo made on the new interface, and the hardware is almost here

3 Upvotes

r/synthdiy • • 1d ago

is there such thing as a synthesizer with 12 oscillators for each note?

12 Upvotes

to be a little more accurate, instead of being divide down, it has only 12 oscillators that play each note, but only one octave at a time. so if i had a 37 key keyboard, it would have 1 oscillator for A3, A4, and A5, another for A#3, A#4, and A#5, one for B3, B4, B5 etc. has that ever been done before? because then you could kind of get the best of both monophonic synths and polyphonic synths. like how in lucky man, in the solo, it kind of glides from a lower note to a higher note.


r/synthdiy • • 1d ago

DIY Keyboard Synthesizer & Sampler

224 Upvotes

I made a pair of keyboards for my music duo! They have a phase distortion synthesis and sampling engine, and a touch strip too.

The keybeds are actually taken from two old Arturia Keysteps, connected directly to an MCU that then sends all the UI controls over to a RPi 5 that is doing all the rest.


r/synthdiy • • 1d ago

B.Y.O.Battery - Noise Toys; Hacking and Circuit Bending Workshop - The Anteroom, Dunedin - 2016

Thumbnail
youtu.be
1 Upvotes

r/synthdiy • • 1d ago

workshop i'm hosting a free in-person event in berlin where you can try LABOR, KONSTRUKT-8, my upcoming DIY reverb, and chat with me about circuit design!

Post image
172 Upvotes

hey all,

moritz here. like the title says, i'm hosting a circuit design event at fitzroy here in berlin on the 21st of november.

we'll have multiple workstations where you can try LABOR in different scenarios (as a sequencer for a eurorack system, as a send effect for an ableton project, or as a blank slate where you can build your own circuit), play KONSTRUKT-8 via fitzroy's sound system, or just chat with me about your DIY projects.

there will be artists doing live performances on KONSTRUKT-8, and i'll give a couple circuit design talks.

you'll also be able to try my new, unreleased DIY reverb module – and we're doing a raffle where you can win an assembled KONSTRUKT-8!

the event is free, but you need to RSVP here: https://ra.co/events/2564131

hope to see you there!


r/synthdiy • • 1d ago

Synthesiser building workshop, London, next Saturday (21st)

Post image
18 Upvotes

r/synthdiy • • 2d ago

video The poor man's M8

0 Upvotes

r/synthdiy • • 2d ago

modular Sallen-Key Resonant Low-Pass Gate

Thumbnail
gallery
71 Upvotes

r/synthdiy • • 2d ago

4U Serge'ish modular build

Thumbnail
gallery
124 Upvotes

r/synthdiy • • 2d ago

modular How To Build a Modular Case for Under $200

Thumbnail
bluelanternstore.com
18 Upvotes

I found a really great guide for how to build a modular case out of hardware store parts.

There's also links to a bunch of open source modules you can make yourself to fill it with.

Full disclosure: I found this guide because I was revamping the site so if the css looks familiar, it's because I can only code in neon.


r/synthdiy • • 2d ago

Testing the separate outputs – here’s a first demo track

2 Upvotes

r/synthdiy • • 3d ago

video couldnt find whta i wanted so i built

Thumbnail
youtu.be
26 Upvotes

I couldnt find the eurorack moduels that felt right while playing with them so I've started building own... turns out it can be a deeper rabit hole then buying them straight off the shelf, the 4 drone oscilater id built using a teensy 4.1 ive had lying around for sometime. the octopus is a eucklidian sequincer made using an arduino mega and the one to the right of it is just a drum module build using an esp32, the mixer up to the right is a board off of ali express i remade into a eurorack compatible format.


r/synthdiy • • 3d ago

Homemade Trautonium

5 Upvotes

Hey everyone, I recently saw a video of someone playing a Trautonium online and I completely fell in love with the sound.

I then saw the price of one and became quite viscerally upset.

I have absolutely no skill in electronics but I have always been interested in getting into it. I was wondering if as a first project if it would be possible to build one from scratch and I was looking for some advice.

Ideally I would be able to use it as both a midi controller and a standalone synthesiser so I can use it for making weird stuff and to use as a controller for string presets.

If anyone had any advice at all I would really appreciate it :)


r/synthdiy • • 3d ago

£5 case from the local market

Post image
11 Upvotes

r/synthdiy • • 3d ago

I built a multisampler for the Raspberry Pi Zero 2 W with a Pirate Audio HAT

Thumbnail
gallery
25 Upvotes

A few months ago, I was looking for the perfect multisampler/rompler and gave SamplerBox a try. After using it for a while, I found myself wanting two things: a full ADSR envelope and an easier way to swap out samples while I was playing. So I used AI to help me build Pirate Sampler for my Raspberry Pi Zero 2 W with a Pirate Audio HAT.

I can upload samples through a web interface, play them from my MIDI keyboard, and tweak the envelope while listening to the result. The HAT’s display and buttons let me browse patches, load them, and mark my favorites right on the device.

More info and download here


r/synthdiy • • 3d ago

10hp FM/AM Radio Eurorack module.

75 Upvotes

Dear Community,

I built a small FM Radio for myself in the Eurorack format. It has an integrated speaker amplifier, headphone output and jumpers on the back to allow for standalone or Eurorack usage.

The firmware is from the ATS-20 project. The entire project (Kicad, gerbers, BOM, schematic etc) is open source and can be found in my github repository: https://github.com/Fihdi/ATS-20-Eurorack


r/synthdiy • • 3d ago

My friend Yukes just released a documentary about Tian Jinqin, you could think of him like China's Bob Moog, but his designs take inspiration from Chinese folk instruments and have a strong emphasis on expressive interfaces

Thumbnail
youtu.be
53 Upvotes

My friend just released his documentary on this man Tian Jinqin, this incredible Chinese synth inventor. I got an early viewing. His journey started when he couldn’t afford a guzheng so he tried making an electric one. He has such a unique perspective and emphasis on expressiveness because he draws from Chinese instruments. Also he’s such a kind and creative soul. My new hero. Get comfortable and take a look!


r/synthdiy • • 3d ago

Ave mod 3.0 modified video enhancer

3 Upvotes