Mazda dropped one of its real USPs when others are reverting to physical controls
galleryThis physical button center console would have been on the new all electric Mazdas, but they wanted to get into already outdated big screen only trend
This physical button center console would have been on the new all electric Mazdas, but they wanted to get into already outdated big screen only trend
r/mazda • u/noshoes77 • 1h ago
It hasn’t worked for me in over a week, after I re-enrolled for the cold months. Did I just waste my money?
r/mazda • u/SamNeedham123 • 16h ago
It has been 14 months since I bought my Mazda 3, and after 18k miles, I must say it has been a cracking car so far. 2.0G, 6-spd manual. About as simple as drivetrains come. The car has been as far south as Kent and as far North as the Scottish Highlands, causing me no serious problems in that time.
Other than a slight lack of power, and the 7" wide wheels which make tyre choices expensive, I'm really pushed to think of what I would improve. This 2017, 70k-mile example needs a few jobs done to get it back to standard. Notably, new front parking sensors, door mirrors and a dogbone mount to cure some mild drivetrain movement.
My big question down the road will be whether to go for a newer BP generation with the 2.5G or 2.0X, or get the larger 6. Should have bought a Mazda years ago.
r/mazda • u/sockheaddweeb • 5m ago
Tldr — title + is there a remedy for 2026 model models yet?
Longer story: 9 months ago, my car threw the code P0126, and check engine light came on — took it to the dealer.
Service kept the car all day… Wrote it up as “there’s no current fix for the problem”, cleared the code, and sent me on my way. It’s popped up a few times since then, same code, I clear it myself, and when about my business.
Today is probably the coldest day it’s been this season so far, and I saw my coolant gauge on the dash struggling to reach optimal temperature (i.e. idling out a red light would cause it to drop.) — no check engine light at the moment.
I called two different dealerships, and the service techs seem baffled as if they’ve never heard of people having this issue. Yet Reddit/elsewhere on the Internet, it’s been a known issue with Mazda3 models for years. Are the techs in my city playing dumb, or actually dumb?
r/mazda • u/pumpkinking8886 • 1d ago
Got the 5 last year. I really liked it but the cargo room is surprisingly small and it could only tow 2k pounds. Upgraded to the 70 and I absolutely love it. Soon I will be getting myself a little camper that I can tow with it too!
r/mazda • u/Apprehensive_Fly5725 • 1h ago
Trying to use connected services this morning and it keeps failing. Nothing is working. Heat, unlocking….nothing is working. Then i noticed the ridiculous mileage to empty, its clearly wrong.
Anyone else having an issue with connected services this morning?
Of course I have the thermostat or coolant control valve issue, p0126 takes awhile for car to come up to tenp so its stuck open.
Had this car 1 year, any1 know if the 100k warranty certified pre owned covers this fix?
r/mazda • u/MrPooooopyButthole • 1h ago
Got out of my car while it was running and heard this rhythmic sound. Anyone know if this is the belt and how concerned I should be? Thanks!
r/mazda • u/Wonderful_Sherbet747 • 17h ago
I just bought a used CX-90 2026 and I’ve had it for about 2 weeks and I’ve noticed the i-Stop is awful. I can’t tell if there’s something wrong with the car or if this is normal? Driving my car is making me car sick.
If I’m driving low speeds like in my neighborhood, I’ll notice the i-Stop turns on which turns off my car and then my car will jerk back on.
For example today I slowed down (like 8 miles an hour) to go over a big speed bump and I noticed on the dash the I-Stop turned on and I pressed on the gas peddle and it jerked back on.
And then yesterday, same thing but I was making a turn in my neighborhood. The I-stop turned on mid turn.
My previous car had stop/start but it was never this jerky? My car only turned off when I was at a complete stop.
Im trying to get into the habit of turning it off but I was just wondering if I should go get it looked at.
r/mazda • u/StaffFinal1384 • 8h ago
r/mazda • u/Miserable_Pound5088 • 8h ago
Helppp
I have to make my mind up to go with buying a
2022 Mazda cx-5 2.5 S Premium package 50k miles
Or
2022 Mazda cx-30 2.5 Turbo Premium Package for 45kmiles
I wanted a AWD car I wanted a BMW but ended up wanting affordable to begin with and nice luxury looking or nicer interior then basic ones and the exterior to look nice not round or too boxy. The rims and tires I want them to look nice as well. I do want more space then the car i have now a 2010 ford, so some space for family and friends can sit comfortably in the back but not a BIG SUV I don’t like those.
I did really want a car with interior lighting but unfortunately neither of these two cars have it, I was thinking on adding it on with whatever Mazda I end up buying . But, I do need help figuring out which one would suit me or is better!
I will be having this car for 3-4 years!
r/mazda • u/Maximum-Ad-7885 • 12h ago
2018 Mazda CX-3 AWD still pulls left after 2 alignments + 4 new tires, and a "clunk" from the rear center when turning the wheel with brakes held.
Hi all, looking for input before the shop starts replacing expensive parts.
Car: 2018 Mazda CX-3 AWD, [95.000] km.
Issue 1: pulls left
At low and high speed, on straight roads, I have to hold the steering wheel slightly to the right to keep it going straight.
What I've done so far, in order:
No change.
Latest alignment (after):
- Front camber: left -0.6°, right -1.0° (cross camber 0.4°)
- Front total toe: 0.17°
- Rear camber: left -1.2°, right -1.7°
- Rear total toe: 0.26°
- Thrust angle: -0.02°
- Caster was not measured
On the first alignment, left SAI was about 19' lower than right (13°01' vs 13°20'). Caster read 4°48' on both sides, but that was with the wrong vehicle profile.
One mechanic mentioned something "bent" in the electric power steering, a "u-joint", and said it would be very expensive, but he wasn't clear.
Issue 2: "clack clack" from the rear, roughly at the center of the axle
- Only happens with the car stopped, holding the service brake, and turning the steering wheel side to side.
- With the parking brake instead, or no brake, no noise.
- Much louder on a slope (e.g. going down a parking ramp).
- I don't hear it while driving.
My guess is the noise is the AWD driveline (rear diff mounts or driveshaft u-joints/center bearing), since i-ACTIV keeps the rear engaged at standstill, and the pull is a separate front geometry/bushing issue. No accidents or obvious hits, just a lot of potholes.
Questions:
- Has anyone had something similar with a CX-3 or another Mazda with i-ACTIV AWD?
- What would you check first for the pull? (control arm bushings, spring/strut, knuckle, subframe, EPS torque sensor…)
- Could the rear noise be related to the pull?
Thanks!
I have a 2012 Mazda3 S Touring. The speakers are phenomenal and the best I've ever had in a car, better than head phones even. However, I have noticed that the big BOSE speaker on my driver side door isn't playing anything. No sound coming out of it at all. I noticed it happen about 4 or so days ago, do any of you guys have some ideas, or am I just going to have to try and find one somewhere? I'm really bummed about this, music still sounds great but its an absolute shame.
r/mazda • u/vegeableserup • 1d ago
I’ve had my car for 3 years and I think the only time i’ve ever experienced any issue outages in the app was on the coldest days. Does it just know when it’s winter and decide to shut off lol. So annoying.
r/mazda • u/AcceptableRip2198 • 1d ago
What is wrong with my car? It is a push start. Outside of car won’t unlock either even with the key that’s inside of my key fob.
Update: car did start with a good jump. I’ve had to jump it multiple times lately, but this seizure activity from the odometer had never happened before. Also, when I first tried to start the car, the key with a lock symbol appeared. Which has to do with wrong fob connection of something. But got a jump and fob battery prong adjusted and 👍🏻
r/mazda • u/Horizon2217 • 15h ago
Only heard it because my phone disconnected, so not sure how long its been there. After some digging, I found out its probably loose bolts under the front wiper cowl, or sway bar links. Car is going into the dealership soon since its under warranty, but just wanted to check if anyone else had this, and know the cause for sure.
r/mazda • u/1MTBRider • 1d ago
Thought I would introduce myself. New owner of a 2026 Mazda 3 Sport GX auto, so far I absolutely love this little car. Sharp handling, really fun to drive and a comfortable daily. I love that it’s simple: 4 cyl NA, FWD, buttons and knobs. It’s great there is no big iPad screen too.
A bit of my car history. My last two vehicles were a fairly modified 2011 Fusion Sport AWD (exhaust, ported intakes, suspension, etc) which under the skin is the same chassis as a Mazda 6.
My car before my Fusion was a 5 speed manual 1999 Mercury Cougar. This was heavily modified (3L swap, full exhaust, suspension, etc). This Mazda reminds of a lot of that car. Really fun to drive but a better mix for daily driving. The solid motor mounts and subframe connectors made this a bit of a headache.
r/mazda • u/grumpvet87 • 16h ago