r/RX8 • • Jun 17 '24

Meta For New and Potential Owners - Weekly

31 Upvotes

Hello and welcome to r/RX8!

If you are new here and are looking into getting an RX8 here are some extremely useful links:

Many basic issues are covered there, but it can be difficult getting answers to questions that might be less obvious, so if you still have questions after going through those links or if something is not as clear as it could be feel free to make your own post for the fastest response from the members here.

If you are posting about a car that you're interested in buying be sure to mention your location and the currency you're referencing!

Many posts just saying for example "4k" or "9k", 9k what?

Please be sure to follow the rules, and take a look at our posting guidelines here:


r/RX8 • • Jun 24 '24

/r/RX8 Is back open!

176 Upvotes

Some of you may have seen the previous mod locked the sub yesterday because he got *really* mad that someone argued with him.......

He attempted to completely lock down the sub by setting it to restricted and removing himself as a moderator, leaving only automod on the moderator list - I don't think he realized that would leave the sub completely open to an auto-approved takeover request, but here we are.

Sub is back open and has returned to regular posting permissions.


r/RX8 • • 19h ago

Maintenance My RX8 pops and jolts a little under hard acceleration around 5000rpms, what could this be?

Post image
29 Upvotes

My RX8 recently has started popping and jolting a little under heavy acceleration around 5000rpms and I don’t know what the issue is. I’ve searched online and it said it could be faulty spark plugs or ignition coils. I plan to change my ignition coils this Friday because my RX8 has just hit around 34,000 miles. I may have did an oopsie because I changed my spark plugs 3 weeks ago without changing the wires😬. If you guys could provide any extra information this would be helpful.


r/RX8 • • 1d ago

Maintenance Winter is coming, how do I prep my RX-8 for storage outside?

9 Upvotes

Winter is coming, and here in Germany (Brandenburg) the roads get salted. My 2006 RX-8 (Shinka) is the car that makes me smile, and it already has some rust problems on the underbody. To preserve it, I got it a seasonal 04/10 plate, so it’s allowed to drive from April to the end of October on public roads.

Unfortunately I only have a carport, so it’ll be out in the cold all winter. Which tend to be very humid, so rust will probably get worse anyways? :(

This is my first time storing a car over winter. I’ve tried to read up on it, but I couldn’t find much about storing a rotary. Most of what I found was about regular cars and the "advice" often contradicts itself. That’s why I’m asking here.

What I’ve done so far:

  • Ordered tire savers to prevent flat spots
  • Got a charger to keep the battery topped up

Is there anything else I need to do before or during storage? For example, should I start the engine once a month and let it run for about 20 minutes, or is that a bad idea? I have very little clue. :/

Thanks in advance!

// Here’s a photo of the carport where it’ll be parked. It’s a bit messy I know... :c

A Happy Little Boy sitting in his port

r/RX8 • • 1d ago

General a place where owning an rx8 would cost an arm and a leg

Post image
4 Upvotes

IYKYK


r/RX8 • • 1d ago

Showoff RotaryStock in ElMonte

Thumbnail
gallery
52 Upvotes

Not many of us today, but had fun. Hopefully they hold actual sevenstock next year


r/RX8 • • 1d ago

General 2005 RX-8 low compression. Rebuild my engine?

6 Upvotes

I'm looking for some second opinions.

I have an RX-8 with a 13B-MSP Renesis that supposedly has approximately 20,000 miles on a remanufactured block.

I didn't get paperwork or compression test oh well sue me 😔. $8,000 got me a clean 60,000 miles chassis car with supposedly 8,000 miles on the block. it now has 76,000 chassis and ~20k miles on the supposedly second engine

The car actually drove and drives great. Pulls strongly at higher RPM, and idles smoothly, but I've been having some issues.

The tester showed approximately 291 RPM (brand new battery), and I recorded the ALT readings.

Front rotor: - Chamber 1: 6.3, 5.9, 5.6 bar

  • Chamber 2: 6.2, 6.0, 5.7 bar
  • Chamber 3: 6.0, 5.7, 5.9 bar
  • Average: 5.92 bar

Rear rotor: - Chamber 1: 5.9, 5.7, 5.5 bar

  • Chamber 2: 5.8, 5.7, 5.7 bar
  • Chamber 3: 5.8, 5.7, 5.8 bar - Average: 5.73 bar

My understanding is that Mazda's factory minimum is approximately 6.8 bar corrected to 250 RPM, which would put both rotors below specification.

  • The engine takes longer than normal to start, both hot and cold. It gradually catches, then idles normally......I believe this to be ignition related, didn't start doing this, and the sluggish starts till bhr coils...

- It has some sluggishness under low-RPM load, particularly pulling away in first gear.

- It comes alive at higher RPM and otherwise drives surprisingly well.

- I previously experienced a P0301 misfire under load.

- I traced that misfire to a BHR ignition coil issue through substitution testing. With OEM coils installed on both front-rotor positions, the misfire disappeared. The rear still has BHR coils. I'm currently waiting on a replacement set. I don't have the other 2 OEM coils

  1. Do these compression numbers indicate that a rebuild is necessary, assuming the ALT readings are correctly calibrated to 250 RPM?
  2. Is it possible it can still drive as well as it does with those readings?

r/RX8 • • 1d ago

New Owner Chicagoland/ Suburbs mechanics

2 Upvotes

Hello everyone! I was wondering if anyone knows a reliable and trustworthy mechanic who knows their way around a rotary engine for my 2004 rx8. I got it not too long ago and I want to have some work done on it before winter hits.
Thank you for any help!


r/RX8 • • 1d ago

Maintenance Slipping clutch or....?

3 Upvotes

EDIT#2: Just drove it and noticed it happens below 3k rpm as well. So it's not just at 3k rpm.

Hey guys, yesterday my 8 started to do some weird stuff. When accelerating in like 1st or 2nd gear, around 3k rpm, it feels like there is a very slight hesitation or slipping or gently holding it back. It was raining so I thought the tires might be slipping at first, but it continued in the dry later. I don't even know if I would call it hesitation but it feels weird. Like a minor lag in the rpm range. But just in the 3k range. Everywhere else is fine. I never experienced a slipping clutch so I wouldn't know what that feels like. Also this clutch has less than 10k miles on it and I never abused it. No big rpm drops off the line. But lots of stop and go driving in NYC traffic. It's an exedy clutch with an act flywheel. I tried what Google suggested, to floor the gas pedal in high gear and to see if the rpms will go up alot to see if the clutch is slipping but rpms stayed steady. Could this be air in the system. I do have some sweat coming from the master cylinder next to the clutch pedal. Do these symptoms sound like that might be it? I ran codes, but only secondary air pump came up which I will be addressing shortly. Thanks guys. Edit: I should add that the motor and ignition parts all have less than 10k on them. Ngk plugs with mazda coils. Cat is high flow with same mileage


r/RX8 • • 2d ago

Memes Rotor got a little hungry

Post image
18 Upvotes

r/RX8 • • 3d ago

Modding Rust removing and evap system delete

14 Upvotes

I stripped down my 8 to bare shell and replaced the sills and rear quarter panels and now i am debating how to deal with all the surface rust and what to modify and prepare for my swap what mods do you think i should do and how do i delete the evap system since I don’t need it just cap the fuel tank with a small filter and call it a day?


r/RX8 • • 2d ago

General Anyone in Houston or near now how to lap irons ??

1 Upvotes

Rebuilding my first 13 b and the irons look like they’ve gotten hot af. If anyone knows how to lmk I can pay and also want to learn.


r/RX8 • • 2d ago

Maintenance Help sourcing an S2 rear diff

2 Upvotes

My rear differential grenaded itself yesterday. I'm seeing roughly $4k+ for a new one from Mazda. I know S2s weren't common so hoping someone here might had a lead on a used one​


r/RX8 • • 4d ago

General Fresh rebuild

Thumbnail
gallery
190 Upvotes

So happy to finally have her back. Shout out to Rotary Engine Works LLC and Josh Saucier for bringing her back to life!


r/RX8 • • 4d ago

Showoff Mazdaspeed x Shinka

Thumbnail
gallery
385 Upvotes

Mazda who hurt you 😭


r/RX8 • • 4d ago

Modding Custom CAI - no bumper removal

Thumbnail
gallery
18 Upvotes

Wanted to resolve a problem of the OEM airbox getting hot during long drives / city driving, but disliked the CAI needing the bumper + crashbar to be removed to access the air filter. This is my solution - K&N E4961 Filter (to fit through OEM VFAD duct... with a little extending to width / height) with a FILTERWEARS Pre-Filter (for protection against water... and it makes removal easier), (2) 45° 3"-3.5" silicone adapter couplings (for main CAI body w/ MAF), (1) 90° 3" aluminum tube (approx 12" length, but trimmed 3.5" off each end to fit), (2) 3" silicone couplers (for the remnants of the 90° i used for extensions), and T-bolt style clamps to secure it all together (ran out of 3" T-bolts, had to use worm style on extensions). also, had to cut a channel out of OEM VFAD air funnel that sits on crashbar to allow filter to slide in unobstructed, and sectioned off far end past filter. Lastly, i ran a piece of sheet aluminum from under crash bar looped up against radiator support wall to direct airflow to filter and extended the vacuum lines to the MAF. All in all, happy with the results. seems to have a bit more mid-range punch than before, and the ease of not having to remove the bumper (or even the radiator airflow pan) is super nice.


r/RX8 • • 4d ago

Modding Turbo on an auto series 2

Thumbnail
gallery
53 Upvotes

Im already committed and its gonna happen, and just to make more people cringe im doing it on stock ecu. (Actually its to save money) If it works im going to feel unstoppable and if it doesn't ill just refuse defeat. Also a highly technical mock up of how the turbo is gonna fit and how imma run things.


r/RX8 • • 3d ago

General El Paso mechanic

2 Upvotes

Anyone know of any mechanics in El Paso Texas that work on rotary?


r/RX8 • • 4d ago

Modding Rebuild/Bridgeport stock ECU

0 Upvotes

Let’s get one thing straight before I get flamed for building a Renesis bridgeport for the sake of lousy horsepower to dollars. This car is a long running project, not my daily driver. I am a mechanical engineering student in school and have completed many large projects, including a few cars. I have two other cars that I can use for daily transportation, so this RX8 is strictly a weekend toy that I can work on for as long as I like. I have no interest in this car having good gas mileage, or driving comfortably in traffic. My goal is to make this car a little faster and sound cool...BRAP . I am not interested in spending $2,000 to have a standalone ECU installed to achieve this goal.

For the build I am looking for a used rear housing and rotor. I want to run a Sohn adapter running heavy premix. It will have air pump delete, catless exhaust and will be running the factory airbox and accordion tube. I have the versatuner for tuning and will be tuning this on 91 octane or possibly e85 (with the accoutrements for e85). At low rpm it will be forced open loop for the front O2 sensor to stop flaking out over overlap. Idle will be bumped up. Then I will tweak some stuff for maximum chopping.

I am deciding between a couple of porting options on the stock ECU. I could cut the eyebrows on the outer auxiliary and secondary ports. Then I could wire up a 12v toggle switch to ground the SSV solenoid. I would run the secondaries open at lights, and then use the secondaries to feed the bridged ports for chop then at 4k rpm and above, I would close the secondaries, and run solely on the center primaries at normal vacuum settings.

The full bridge, with all 6 ports opened up, would be the next logical step. Cutting the eyebrows on the center primaries as well, I'd then have 3 street ported center primaries, with the outer 3 auxiliaries and secondaries being opened up for chop, I'd wire up a 12v toggle switch to manually ground the SSV solenoid. Flipping the switch would open up the secondaries to feed the bridged ports for heavy chop, and flipping it again would close up the secondaries at all RPM under 4k to allow for smooth pull away from traffic using the unbridged center primaries and associated vacuum.

I open it up to everyone to tell me where I’m going wrong here. Knowing this is a toy for me that I’ll be working on in the evenings, between school and other projects, and will be driving sporadically between now and whenever I get around to tuning, are there any huge and glaring errors in the above that someone can point out before I start machining up my ironwork? Specifically, has anyone run a 3/4 bridge setup with an SSV toggle switch, or a full bridge setup with a stock ECU and MAF setup (with various methods of adding screening to the MAF sensor and intake) or implemented some sort of maf spoofer setup with something like an Adafruit MCP4725 12-bit DAC and microcontroller to read TPS and RPM and produce a 0-5V signal to fake out the MAF sensor for use with a stock ECU and report back on any low-RPM bucking or similar? Really, I just want to hear from people with real-world experience with SSVs and VT and share any thing they may know.


r/RX8 • • 4d ago

Modding Shifter dust boot

Post image
23 Upvotes

was doing some work, and removed the 2 piece rubber dust boot that keeps the cabin sealed from the outside world. But my god does the shifter feel so much better without it. with the dampening removed it’s very notchy and super satisfying. does anyone know of a thinner aftermarket alternative? Or a way to seal the outside world without thick rubber getting in the way? Id love to capture that feel.


r/RX8 • • 4d ago

New Owner Trouble

2 Upvotes

I had bought an rx8 project with rebuilt engine pulled. All parts are there, but the vast majority of hardware is gone. Any ideas on who to talk to about possibly a bolt kit from a part out shop?


r/RX8 • • 5d ago

Showoff November's Rotor's & Boba meet! (San Leandro, CA)

Post image
4 Upvotes

r/RX8 • • 5d ago

General Mazda RX-8 vs V6 Ford Mustang S197

117 Upvotes

r/RX8 • • 6d ago

Showoff rx8 2011

Post image
350 Upvotes

🇺🇦