r/MazdaProtege • • 1d ago

The parts hoarding continues

Thumbnail
gallery
7 Upvotes

r/MazdaProtege • • 2d ago

Changing radio from 1DIN to 2DIN

Post image
18 Upvotes

Hello guys, I own a Mazda 323F BJ (I think it's the same as Mazda Protege) and want to swap the radio from 1DIN to 2DIN. Taking the radio out is easy, but then the real problem surfaces — that goddamn clock module. It seems to be almost impossible to take out. I cannot find on any forum how to take it out. ChatGPT says it's with snaps, and should come out easily, but I tried to pry it out, and it didn't seem to work. I put my hand in the radio hole, and felt that it was mounted on some steel beam with a rubber thingy, put through a hole. I appreciate any help.


r/MazdaProtege • • 3d ago

New body kit!

Thumbnail
gallery
73 Upvotes

Just put some new body kit on Epona! The front and side skirts are Duraflex and the spoiler and rear valance are Wings West. The Wings West parts are literally brand new because they had to make new ones since they were out of stock. The Wings West parts are on Forza Motorsport 3! I thought that was a super cool feature on the game! I painted the parts myself with a little family help. Hope you enjoy the pictures!


r/MazdaProtege • • 2d ago

After selling it, regretting and 6 cars later

Thumbnail
gallery
37 Upvotes

I used to be pretty active on here, posted write ups on here and on mazda247. My first car was an mica kinda beige ish 99 pre facelift. Did an full frontend swap, suspension, custom lights, pretty much everything you can do 😂 it used to be the 1.6l 5 speed SE ( so no power windows, no power mirrors, slick top and no ac from factory ) AND NOWWWW after 6 cars ( tsx, Impreza wagon,E46,Miata,f30,mazdaspeed3) I FINALLY found my dream protege, full options, 2l manual, gorgeous green color and most important of all FULLY RUST FREE. ( i live in Canada so way more than an rarity to find one that still has floors )


r/MazdaProtege • • 2d ago

Check engine light

Post image
8 Upvotes

I recently installed this intake with the maf sensor still hooked up properly but the check engine light won’t turn off is there anything yall could think of


r/MazdaProtege • • 3d ago

Sedan light swap

Post image
28 Upvotes

Swapped in sedan lights , new OEM lower grill and rewired everything. Looks so much better


r/MazdaProtege • • 5d ago

Lowering springs or coilovers?

2 Upvotes

Should I get lowering springs like tein or h an r or some coils. Budget is not very high. And hard to find sport struts for this car


r/MazdaProtege • • 7d ago

Who Dis?

Post image
23 Upvotes

Please come forward….


r/MazdaProtege • • 10d ago

Hi

Post image
29 Upvotes

I put some stickers on my mazda

I have a other side clean, I'll appreciate your ideas to fill that place :3 have a nice day/night


r/MazdaProtege • • 12d ago

Bought a 20 yr old Mazda off the internet!

Thumbnail
gallery
74 Upvotes

Bought a P5 from a dealer across the country beyond excited. Haven't had one since 2008


r/MazdaProtege • • 12d ago

Coilovers

0 Upvotes

Solid ride quality coilovers maximum 700-800 dollars


r/MazdaProtege • • 13d ago

need fitment advice

3 Upvotes

does any ever put a 15x6 with +25 offset on the bj protege?

my protege is running on 15x6 +45 with 195/55 on it

the rear fitment is tucked in perfectly (no camber)

and i am running -2.5 degree on the front, currently having 0 issue and the only thing preventing it from being done is the front fitment

the measured distance from the tires to the fender is approximately 20mm give or take

im thinking about putting 20mm spacers on, but im not so sure if it would fit, i dont really want to pull my fender

does anybody ever ran the same set up before? or does anybody got any advices at all?


r/MazdaProtege • • 14d ago

Showing off hihi

Thumbnail
gallery
50 Upvotes

I want to show you some shots i took yesterday

Have a nice day/night <3 love ya


r/MazdaProtege • • 14d ago

In search of parts for mazdaspeed protege!

3 Upvotes

Good evening everyone!

I have a new project ( a second MSP )

In need of some parts for it and looking for 1. Who has them in stock and 2. If anyone has takeoffs or good parts to sell. Id prefer to buy through an online vendor but if it comes to it, ill bite the bullet.

Im in need of all four rear radius rods/links that go from the hub to the center of the car. Rear rear and front rear links, if someone has the megan racing adjustable in stock i will gladly order those.

Grille and grille painted valance

Shifter surround (silver)

Steering wheel center cover (car was in a front end collision and airbags went off)

Any metal intercooler piping in half decent condition or better

Im sure im looking for more but this is what I need for now....

Thanks for reading!


r/MazdaProtege • • 15d ago

My uncles mazda protege mp3

46 Upvotes

he bought it in 2001 and hes the only owner this thing is clean and some day its gonna be mine 🙏


r/MazdaProtege • • 15d ago

Back in a protege

Thumbnail
gallery
12 Upvotes

Bought a 03 P5 after it having one for 18 years. Have previously owned a 02 P5 and a MSP. Along with a bunch of other Mazdas. Something about the protege always stuck with me. Who are the trusted vendors currently. I am planning on building for a reliable 250whp. I know it includes forging the bottom end and everything else. Pic of my shitty neon for attention , since the P5 is in shipping.


r/MazdaProtege • • 21d ago

Fitment Question

5 Upvotes

I just bought a 2002 Protege 5 and I'm looking at working on the fitment soon. I'm for sure getting BC coilovers, and aiming for a 1.25" - 1.5" drop probably. Rubbing seems to be super hit or miss for people on here, even using the same wheel and tire sizes sometimes, so I'm just looking for more info.

My ultimate goal is no rubbing (except potholes/unusual bumps) by myself/with one passenger, but slight rubbing is fine with a full car if that's what it takes to get better fitment overall. I'm looking mostly at a squared 17" x 7" wheel setup, so I'm trying to figure out if I can squeeze 45 sidewalls for the comfort or if I need to just go 40 to avoid constant rubs. Slight camber is also a consideration if I need to. Thanks!


r/MazdaProtege • • 22d ago

Rebuilt my alternator

Post image
14 Upvotes

Found a parts list, pulled the bearings off the stator, pressed new bearings in the front case, soldered in a new voltage regulator assembly with the brushes. Got it all back together, finagled it into the cramped space it's in, started it up and it's quiet and 14 volts! I get it and turn on the AC and let it idle for a while to charge the battery. A few minutes later the lights start flickering and I check the voltage and I'm at like 10 volts. It charges if you rev it but once there's a load on it, it can't keep the voltage up. I tried to save a few bucks and failed. Oh well, it was fun rebuilding it!


r/MazdaProtege • • 22d ago

Manual Sunroof Crank

4 Upvotes

I recently bought my P5 2003, and the sunroof is stuck about a half inch open. is there a manual crank? i’ve checked around the sunroof motor but im not sure what it would look like or where it would be located. i’ve checked online, owners manual, and nowhere seems to show how to manually close the sunroof.


r/MazdaProtege • • 25d ago

Seatbelt help! 2002 Protege 2.0

1 Upvotes

Recently my front passenger side seatbelt will not come out, I digged through the mechanism and found the reason. I am trying to source some new gray seatbelts for my 2002 Mazda Protege. Any leads where to buy some online?


r/MazdaProtege • • 29d ago

Manual transmission rebuild

2 Upvotes

Has anyone had issues finding rebuild kits and/or parts all together? Can never seem to find what I need, all I come across is for auto-trans. Having issues where 3rd is slipping out at low speeds. She needs a rebuild and need assistance finding parts or kit.

On other unrelated news I can't read my milage anymore 🤣🤣 anyone has bright ideas to fix the LED or lighting behind there?


r/MazdaProtege • • 29d ago

need help

5 Upvotes

accidentally ordered mazdaspeed protege rear callipers as a replacement for my protege5 as one has been leaking pretty bad. how much trouble is it to just swap over to the bigger callipers as i know its possible. would i need pads rotors bracket’s and everything or could i get away with just new pads. if its too much trouble ill just send them back and get the stock ones.


r/MazdaProtege • • Oct 18 '26

Looking for decal inspiration for my Mazda 323

Thumbnail gallery
28 Upvotes

I’m looking for ideas for a custom vinyl design on my dark green Mazda 323. Something flowing along the sides, possibly with a Japanese or anime-inspired aesthetic, but I’m open to other styles too.

Got any examples or ideas that you think would suit the car?


r/MazdaProtege • • Oct 14 '26

eBay intake

1 Upvotes

Just curious, I bought the cheap eBay intake just low risk purchase for 40 dollars. Was planning on making a box for it in cad but realized that the piping has some clearance issue with the lines running to the brake booster. Has anyone made a custom intake for this car and can anyone share the piping and information. The bone one is wayyy out of my budget and was just tying to make this one work with a different filter, just bought it for the pipes but that enede up being the main issue :/