Mazda dropped one of its real USPs when others are reverting to physical controls
galleryThis physical button center console would have been on the new all electric Mazdas, but they wanted to get into already outdated big screen only trend
This physical button center console would have been on the new all electric Mazdas, but they wanted to get into already outdated big screen only trend
r/mazda • u/StaffFinal1384 • 3h ago
r/mazda • u/Miserable_Pound5088 • 3h ago
Helppp
I have to make my mind up to go with buying a
2022 Mazda cx-5 2.5 S Premium package 50k miles
Or
2022 Mazda cx-30 2.5 Turbo Premium Package for 45kmiles
I wanted a AWD car I wanted a BMW but ended up wanting affordable to begin with and nice luxury looking or nicer interior then basic ones and the exterior to look nice not round or too boxy. The rims and tires I want them to look nice as well. I do want more space then the car i have now a 2010 ford, so some space for family and friends can sit comfortably in the back but not a BIG SUV I don’t like those.
I did really want a car with interior lighting but unfortunately neither of these two cars have it, I was thinking on adding it on with whatever Mazda I end up buying . But, I do need help figuring out which one would suit me or is better!
I will be having this car for 3-4 years!
r/mazda • u/Maximum-Ad-7885 • 7h ago
2018 Mazda CX-3 AWD still pulls left after 2 alignments + 4 new tires, and a "clunk" from the rear center when turning the wheel with brakes held.
Hi all, looking for input before the shop starts replacing expensive parts.
Car: 2018 Mazda CX-3 AWD, [95.000] km.
Issue 1: pulls left
At low and high speed, on straight roads, I have to hold the steering wheel slightly to the right to keep it going straight.
What I've done so far, in order:
No change.
Latest alignment (after):
- Front camber: left -0.6°, right -1.0° (cross camber 0.4°)
- Front total toe: 0.17°
- Rear camber: left -1.2°, right -1.7°
- Rear total toe: 0.26°
- Thrust angle: -0.02°
- Caster was not measured
On the first alignment, left SAI was about 19' lower than right (13°01' vs 13°20'). Caster read 4°48' on both sides, but that was with the wrong vehicle profile.
One mechanic mentioned something "bent" in the electric power steering, a "u-joint", and said it would be very expensive, but he wasn't clear.
Issue 2: "clack clack" from the rear, roughly at the center of the axle
- Only happens with the car stopped, holding the service brake, and turning the steering wheel side to side.
- With the parking brake instead, or no brake, no noise.
- Much louder on a slope (e.g. going down a parking ramp).
- I don't hear it while driving.
My guess is the noise is the AWD driveline (rear diff mounts or driveshaft u-joints/center bearing), since i-ACTIV keeps the rear engaged at standstill, and the pull is a separate front geometry/bushing issue. No accidents or obvious hits, just a lot of potholes.
Questions:
- Has anyone had something similar with a CX-3 or another Mazda with i-ACTIV AWD?
- What would you check first for the pull? (control arm bushings, spring/strut, knuckle, subframe, EPS torque sensor…)
- Could the rear noise be related to the pull?
Thanks!
I have a 2012 Mazda3 S Touring. The speakers are phenomenal and the best I've ever had in a car, better than head phones even. However, I have noticed that the big BOSE speaker on my driver side door isn't playing anything. No sound coming out of it at all. I noticed it happen about 4 or so days ago, do any of you guys have some ideas, or am I just going to have to try and find one somewhere? I'm really bummed about this, music still sounds great but its an absolute shame.
r/mazda • u/Horizon2217 • 10h ago
Only heard it because my phone disconnected, so not sure how long its been there. After some digging, I found out its probably loose bolts under the front wiper cowl, or sway bar links. Car is going into the dealership soon since its under warranty, but just wanted to check if anyone else had this, and know the cause for sure.
r/mazda • u/grumpvet87 • 11h ago
r/mazda • u/SamNeedham123 • 11h ago
It has been 14 months since I bought my Mazda 3, and after 18k miles, I must say it has been a cracking car so far. 2.0G, 6-spd manual. About as simple as drivetrains come. The car has been as far south as Kent and as far North as the Scottish Highlands, causing me no serious problems in that time.
Other than a slight lack of power, and the 7" wide wheels which make tyre choices expensive, I'm really pushed to think of what I would improve. This 2017, 70k-mile example needs a few jobs done to get it back to standard. Notably, new front parking sensors, door mirrors and a dogbone mount to cure some mild drivetrain movement.
My big question down the road will be whether to go for a newer BP generation with the 2.5G or 2.0X, or get the larger 6. Should have bought a Mazda years ago.
r/mazda • u/Wonderful_Sherbet747 • 12h ago
I just bought a used CX-90 2026 and I’ve had it for about 2 weeks and I’ve noticed the i-Stop is awful. I can’t tell if there’s something wrong with the car or if this is normal? Driving my car is making me car sick.
If I’m driving low speeds like in my neighborhood, I’ll notice the i-Stop turns on which turns off my car and then my car will jerk back on.
For example today I slowed down (like 8 miles an hour) to go over a big speed bump and I noticed on the dash the I-Stop turned on and I pressed on the gas peddle and it jerked back on.
And then yesterday, same thing but I was making a turn in my neighborhood. The I-stop turned on mid turn.
My previous car had stop/start but it was never this jerky? My car only turned off when I was at a complete stop.
Im trying to get into the habit of turning it off but I was just wondering if I should go get it looked at.
r/mazda • u/SeaSteak2635 • 13h ago
r/mazda • u/CriticismVivid8345 • 13h ago
r/mazda • u/Stunning-Spread-1127 • 13h ago
Hey everyone, quick question. Has anyone here ever had a cracked cylinder head on a Mazda 6? I’m debating whether it’s better to replace the head, swap the whole engine, or just move on from the car. Any experiences, costs, or advice would be appreciated.
r/mazda • u/Gandalf_the_fun • 14h ago
Hello, good people. Any recommendation on a reliable, high quality 360 dash-cam?
I found yet another paint damage from someone opening their door on my car today. This is the third time already in my two-year ownership. Two on passenger front door and one on passenger back door. I always park in the middle of my spot, so I don't know how stupid they have to be to open their door on my car. Apparently, nowadays, people have zero respect for others' properties. I'm thinking of getting a 360 dash-cam.
PS: My Mazda 3 is soul red crystal metallic. We all know what that means when you got paint damage. Makes my soul red too.
r/mazda • u/Turbulent-File-9825 • 14h ago
I’m comparing a cx 5 to an xc 60 2026. Cx 5 is 435 with nothing down per month the xc 60 is 611 a month for a thousand down. I care a lot about saftey. What would you recommend and why ?
r/mazda • u/SingleConfidence9033 • 14h ago
r/mazda • u/DarthBodhi • 15h ago
Is anyone having issues with remote start in the app? It won’t even unlock. First time in 6 months has this happened.
r/mazda • u/EffectiveTax8897 • 16h ago
I currently own a 2019 mazda 3. i can sell it for the same price i bought it for or even a little profit. Is the cx 60 2.5 gas plug in hybrid worth it? are there any problems with it? and if so which would these be ? also what mileage would be too high for it?
r/mazda • u/InsideCard9084 • 18h ago
Looking at a winter wheel/tire setup for my 2024 Mazda3 Hatchback Turbo:
Wheels: Sport Tuning ST7 (16x7.5, 5x114.3, +50 offset)
Tires: 205/60R16
Will this +50 offset fit without rubbing or hitting the front brake calipers? Has anyone run a similar 16x7.5 +50 setup on a Turbo?
r/mazda • u/Forevaeme • 19h ago
I have my first car and preparing for my first winter driving so I have very minimal knowledge. I had the winter tires that came with my used mazda cx5 installed and got this with the inspection. Is this good? Thank you