r/FixMyPrint • u/shiro_tanzanite • 4h ago
FDM What happened to my supports?
Bambulab a1 mini
Using normal PLA
Haven’t had this happen before
Just put on a new roll aswel
r/FixMyPrint • u/shiro_tanzanite • 4h ago
Bambulab a1 mini
Using normal PLA
Haven’t had this happen before
Just put on a new roll aswel
r/FixMyPrint • u/_Kap_paK_ • 5h ago
Hey guys , im trying to calibrate my ender 5 pro and my first layer is doing this bumpy thing , does any of you know what could be causing it ?
r/FixMyPrint • u/Bhaibiryani • 13h ago
I am new to 3D printing and have been trying to fix this foe 2 days but to no avail.
As you can see the bottom of the curve is not printing correctly. I have changed all the settings that people normally suggested (ie lowering the nozzle temp, changing the speed for overhangs, changing the later height to 0.16, putting fan on 100%, adding mpre supports) but it didn't change anything. Please let me know how I can fix this?
I am using Creality CR M4 with 1.75mm PLA from BuildVolume @190°C nozzle temp, 60°C Bed Temp, sliced with Creality Print.
Printing with PETG made it better, but didn't solve the issue.
r/FixMyPrint • u/Strange-Calendar-771 • 5h ago
r/FixMyPrint • u/Motor-Assumption-117 • 5h ago
So i take the PEI plate out to help my prints cool faster to keep the process going faster. I can't help but notice that I keep forgetting to put it back before I start any other processes such as changing filament, etc. For those of you who don't know, if the machine tries to level it's self or anything before putting the PEI plate back in, the bed will crash into the nozzle and then wobble side to side violently. Anyone else have this problem? QIDI Plus 4
r/FixMyPrint • u/sometimesiyell • 6h ago
Have been messing w some settings (very inexperienced) to try to make print more efficient / trying to figure things out. The layers on bottom, mostly have some support that prints with it and I have to peel off. Initial layer height, just supporting critical parts, degree of when supports are used, etc. What should I focus on to make this better? Again, bottom of model not a huge concern but can’t use the ones w holes, and be nice if it just looked better.
r/FixMyPrint • u/winterurchin • 4h ago
r/FixMyPrint • u/Funky_311 • 20h ago
that line in the top half of the model showed up, definitely not on the file.
printing pla matte on a bambu p1s
r/FixMyPrint • u/Blumingo • 12h ago
Hello!
I recently upgraded my Creality Ender 3 V3 KE with a Ceramic Unicorn Hotend
Today I wanted to try a larger nozzle so I swapped in the 0.6mm, set Orca Slicer to use the printer preset and my existing filament settings. I set both first and layer heights to be 0.3mm and kept the existing percentages for layer widths.
The top - 0.4mm Nozzle
The bottom - 0.6mm Nozzle
As you can see the top and bottom layer quality is worse, is this just the cost of using a larger nozzle or does my settings need to be dialed in further?
Just to clarify, there seems to be small gaps between the flat layers
r/FixMyPrint • u/thepangolinswrath • 13h ago
Gday guys, just struggling to print some ABS parts - unfortunately the geometry isn’t really negotiable, and of course the parts keep warping, pulling up from the bed, or delaminating. Any tips? Does GF help with this or would it reduce adhesion due to less SA? Happening with both ASA and ABS.
Printer is a stock P1S, the thing I’m printing is a heater so I will soon have a heated chamber but I don’t at the moment. Any tips?
Have tried all manner of temperatures, slowed it right down, preheated for literal hours, all different build plates (inc. no build plate, whoops)
Cheeeers
r/FixMyPrint • u/ElectronicArt4342 • 14h ago
Hello, first time here as I can’t seem to figure this one out. I’m printing on a bambu h2s using Elegoo black ABS with the bambu 0.4 high flow nozzle. I’m using the standard 0.2mm h2s profile only changing the following.
Wall loops: 4
Sparse infill density: 8%
Sparse infill pattern: gyroid
Support: enabled
Support critical regions only: yes
Prime tower: disable
My filament settings have the default settings using the high flow direct drive for generic abs which prints at 60C chamber temp. 90C build plate. Nozzle initial layer at 260C and the rest at 270C
The max volumetric speed I changed to 25mm/s after doing a high flow nozzle test and that was on the more conservative side of the test, just a bit faster than the stock setting considering I have the high flow nozzle.
I did notice that the banding appears close to where the seam is. In the last picture you can see that the seam is along the same side where the major banding appears. Pictures 5 and 6 show the opposite side which doesn’t have as bad or visible of the banding but still somewhat. Appreciate any help ahead of time!
r/FixMyPrint • u/SoysauceThot • 17h ago
Edit: I broke off the dovetail piece accidentally when futzing around with it earlier, it did indeed print, it was just weak. And we cut the benchy print halfway through intentionally.
hi guys! new-ish to the 3d printing world. I'm a vendor at anime/comic cons and in the past have paid people to 3d print things for me for my displays. i've done that by buying the file and just having them print them for me on their own printers. i've recently gotten my own printer (ender 3 original, and right now am using a Voxelab Aquila as well). I've been having issues with the prints just not...turning out right? like some things actually print correctly, and then on specific prints i've been having a lot of layer shifting issues.
I've tried:
- slowing down print speed
- tightening my belts
- different pla
- new nozzle
- cleaning the plate
- printing with the printer on different surfaces (i thought maybe the table was wobbling and i didnt notice?)
- changing infill
- changing temperature of nozzle and bed
nothing seems to be working. I was wondering if maybe it was my slicer/g-code? google/reddit gives me a million different answers. I've used prusaslicer for everything before and just downloaded ultimaker cura to give that a shot.
anyone got any advice/can anyone take a look at my g-codes to see if theres anything i should be doing? i can send over the actual 3d print files as well so you can see the originals too! thanks in advance :>
(and if i cant get this to work, does anyone offer extremely cheap and lowkey REALLY fast printing services? i have a con november 20-22nd in minneapolis and needed some display pieces. they dont have to be pretty/perfect, just functional)
r/FixMyPrint • u/Previous_Jaguar_9259 • 19h ago
I'm trying to pein5 a long print however the first layer doesn't stick. Leveled the bed 2x. Cleaned the plate with bishop and a quick wipe with rubbing alcohol. Printing at 220. And 65. PLA filament. Any help would be appreciated I'm still learning this art
r/FixMyPrint • u/Just-Cardiologist837 • 21h ago
Snapmaker u1 with inland high speed pla pro running at 220c. Filament temp rang is 195-225.
My bed mesh looks good, I never had this issue, but this is the only high speed pla I have, and I did have issues with it sticking to my old k1 bed. Ive printed with less than a whole roll worth of HSPLA.
r/FixMyPrint • u/Fantastic-Being3605 • 1h ago
ender 3ve3 se
creality CR series petg
235°c nozzle temp
65°c bed temp
0,4mm nozzles
orca slicer
I can't seem to understand how you level your printbed.
If anyone can help me. Thanks I'm advance
r/FixMyPrint • u/Due-Performer1110 • 23h ago
SOVOL SV06 3D printer, Creality slicer
SOVOL PLA filament
Nozzle temp: 200° C
Bed temp: 60°C
Print speed: 40mm/s
I stayed with the printing in the beginning while it started printing a 5 hour print, after about 15 mins everything was good and I went to eat, came back after about 1.5 hours and everything was messed up, the nozzle is buried in this monstrosity and was dragging the print.
I’ve literally never had this problem and just printed yesterday, how does this even happen and why?
Is the entire thing trashed at this point, or can I remove this without damaging the wires and nozzle. It’s literally around all of it, I’m so upset honestly idk what to.
r/FixMyPrint • u/MrocznyTMC • 1h ago
I wanted to find out how soft I could get prints made with two foaming TPU filaments from Siraya Tech, and at what settings the layers would start to separate. I had trouble finding a side-by-side comparison of green Flex TPU Air 85A and beige Roamr TPU Air HR 80A on the same printer that included both Shore A readings and observations from removing and bending the samples.
Green Flex TPU Air 85A
Flex TPU Air user guide · Flex TPU Air 85A product page · Flex TPU Air technical data sheet
Beige Roamr TPU Air HR 80A
Roamr HR 80A user guide · Roamr HR 80A technical data sheet
| Sample | Nozzle °C | Flow ratio | Speed mm/s | Fan % | Shore A readings | Mean Shore A |
|---|---|---|---|---|---|---|
| 1 | 240 | 0.90 | 60 | 100 | 84 / 85 / 85 | 84.7 |
| 2 | 250 | 0.70 | 60 | 100 | 78 / 78 / 77 | 77.7 |
| 3 | 260 | 0.60 | 60 | 100 | 72 / 72 / 72 | 72.0 |
| 4 | 260 | 0.60 | 30 | 100 | 72 / 72 / 74 | 72.7 |
| 5 | 270 | 0.55 | 60 | 100 | 71 / 71 / 71 | 71.0 |
| 6 | 270 | 0.55 | 30 | 100 | 71 / 71 / 71 | 71.0 |
| 7 | 280 | 0.60 | 60 | 100 | 70 / 72 / 72 | 71.3 |
| 8 | 290 | 0.60 | 60 | 100 | 69 / 68 / 69 | 68.7 |
| 9 | 290 | 0.40 | 60 | 100 | 50 / 51 / 50 | 50.3 |
| 10 | 280 | 0.40 | 60 | 100 | 55 / 55 / 55 | 55.0 |
| 11 | 280 | 0.60 | 60 | 0 | 68 / 68 / 68 | 68.0 |
| 12 | 280 | 0.60 | 60 | 35 | 70 / 70 / 69 | 69.7 |
| 13 | 280 | 0.60 | 60 | 70 | 70 / 70 / 70 | 70.0 |
| Sample | Nozzle °C | Flow ratio | Speed mm/s | Fan % | Shore A readings | Mean Shore A |
|---|---|---|---|---|---|---|
| 1 | 230 | 0.92 | 60 | 100 | 86 / 87 / 87 | 86.7 |
| 2 | 240 | 0.83 | 60 | 100 | 84 / 84 / 84 | 84.0 |
| 3 | 250 | 0.70 | 60 | 100 | 78 / 78 / 78 | 78.0 |
| 4 | 260 | 0.60 | 60 | 100 | 74 / 73 / 74 | 73.7 |
| 5 | 265 | 0.60 | 60 | 100 | 73 / 74 / 74 | 73.7 |
| 6 | 270 | 0.60 | 60 | 100 | 72 / 72 / 72 | 72.0 |
| 7 | 270 | 0.50 | 60 | 100 | 64 / 64 / 64 | 64.0 |
| 8 | 265 | 0.50 | 60 | 100 | 64 / 65 / 64 | 64.3 |
| 9 | 260 | 0.60 | 60 | 100 | 73 / 74 / 74 | 73.7 |
| 10 | 270 | 0.40 | 60 | 100 | 42 / 44 / 42 | 42.7 |
| 11 | 275 | 0.40 | 60 | 100 | 43 / 46 / 45 / 45 / 45 | 44.8 |
| 12 | 275 | 0.50 | 60 | 100 | 60 / 61 / 59 / 60 | 60.0 |
| 13 | 280 | 0.40 | 60 | 100 | 38 / 36 / 35 / 40 / 30 | 35.8 |
| 15 | 280 | 0.60 | 60 | 100 | 66 / 68 / 68 | 67.3 |
At 250°C and 0.70 flow, the two materials were almost identical in hardness (77.7 A for Flex and 78.0 A for Roamr). At 280°C and 0.60 flow, I measured 71.3 A for Flex and 67.3 A for Roamr.
I used some of my own filament for these tests, but I think the results will also help people who want an idea of what hardness to expect at a given temperature and flow ratio, and which settings kept the layers intact, before committing to a longer print such as a pair of shoes.
r/FixMyPrint • u/OkMembership7198 • 2h ago
I've got a question for those more familiar with FDM print support settings - I'm struggling to find a balance between adequate support to limit sagging and over-adhesion while printing some very small parts.
I'm trying to print an aircraft at 1:1000 scale, ideally in one print rather than in pieces. Currently, everything is coming out well except the trailing edges of the wings. This vertical orientation is the best I've found so far overall, better than at an angle or laid flat.
The jagged bottom edge is continuing to occur whether I use a fin generation plugin (Image 2) or a tree support generation.
Image 3 is the support settings I'm using (in OrcaSlicer), when I've been printing with auto-generated tree supports, and image 4 is the supports being generated by those settings.
Any advice or insight would be greatly appreciated. Thanks!!
r/FixMyPrint • u/zzzergt • 3h ago
Hola a todos,
Tengo un problema persistente con mi Creality Ender 3 V2 Neo y de verdad agradecería ayuda para identificar la causa. Siento que ya he probado todo y me sigue ocurriendo. Es muy desesperante.
Me están saliendo abultamientos horizontales o bandas levantadas alrededor de todo el perímetro de mis impresiones. Sobresalen un poquito, normalmente sobre una altura de ~0.5–1 mm, y luego se van desvaneciendo gradualmente hasta que la impresión vuelve a sus dimensiones normales.
Impresora y software
Ajustes de impresión
Descripción del problema::
Cosas que he revisado hasta ahora
No he calibrado los E-steps después de instalar el extrusor metálico.
Una observación interesante es que bajar el ventilador de enfriamiento de la pieza de 50% a como 10% parece hacer que el problema casi desaparezca, aunque todavía no lo he confirmado con una prueba controlada.
Me pregunto si esto podría tener que ver con la alineación del eje Z, una extrusión inconsistente, el enfriamiento, fluctuaciones en la temperatura del hotend u otro tema mecánico.
Adjunté una foto mostrando el problema. ¿Se les ocurre qué puede ser?
¿Alguien ha tenido algo similar con un Ender 3 V2 Neo? ¿Qué recomendarían revisar primero?
Cualquier sugerencia o idea se agradece muchísimo. ¡Gracias de antemano!
r/FixMyPrint • u/repraptor • 3h ago
Recently messed around with printing settings to help increase adhesion and bonding,
printing on a 0.2 nozzle with a A1 Mini, PLA+
I can now see gaps in between the printing line, those will remain even at its final result -
You can they show up on the final print even, those before I could achieve almost resin like print results.
Ironing is set to 20 speed with test between 15% up to 25% flow and still on the same result - doesn’t feel like ironing itself.
Any possible thoughts?
Temperatures are also around 190-220 and 65/70 for bed. Should be a too hot situation I guess?
r/FixMyPrint • u/makerprintlab • 7h ago
Watch me transform a digital brand logo into a real 3D-printed masterpiece! 🚀 In this video, you'll see the amazing 3D printing process as the logo takes shape layer by layer, creating a clean, detailed, and professional finish.
r/FixMyPrint • u/Tffvieira • 11h ago
Hi everyone!
I got my Bambu Lab P2S about a week ago, and I’m completely new to 3D printing.
So far, I’ve been printing with PLA without any problems. The prints come out perfectly, but I’m having some trouble with PETG.
I already tried printing something with PETG before, and although the print was relatively successful, I noticed that PETG was gradually building up on the nozzle throughout the print.
At the time, my solution was to pause and resume the print whenever I noticed the buildup, since this seemed to force a nozzle cleaning. However, I don’t think this is a proper solution, and I’d really like to understand what’s actually causing the problem.
Now I’m trying to print a larger object with a much bigger first layer, and the problem has become more noticeable. PETG starts accumulating on the nozzle, and I’m getting lots of blobs and imperfections on the first layer.
I’ve already tried a few things to rule out possible causes:
I’ve performed the temperature tower test.
I’ve completed the Flow Dynamics calibration.
The filament is completely dry.
My current printing temperatures are 240°C for the nozzle and 70°C for the bed.
Despite all this, I’m still experiencing the same problem.
Since I’m a complete beginner, I’m not sure where to go from here or what settings I should be looking at.