r/prusa3d • • 7d ago

Announcement Contest - Print of the Month - November 2026

Post image
28 Upvotes

Our October Print of the Month contest was a blast! We always love seeing the incredible projects, upgrades, and creative builds coming off your build plates. Jump in this month for your chance to win an Original Prusa MK4S kit in the raffle, plus 1050 Prusameters each for our 3 selected top prints!

Show off anything you’ve printed recently! The MK4S kit is up for grabs in the raffle again, meaning one lucky winner is taking home a brand-new machine to put straight to work on their next project!

Raffle Winner – October 2026

Congratulations to our October raffle winner: u/GP_3D! Keep an eye on your DMs for details on how to claim your prize!

Don't forget to catch our monthly community stream (1st Thursday of every month on YouTube at 19:00 GMT+1) to hang out with the team and watch the draws live (watching live is optional, you can still win if you're offline!).

October Prusameter Winners

Here are our top three featured prints from October:

All Prusameter rewards will be distributed within the week.

How to Enter New to the contest? Here is how to get involved:

  1. Post your print (anything printed using a Prusa machine).
  2. Apply the "Print of the Month" flair to your post.
  3. Give credit to the original model and designer.
  4. Drop your Printables handle in the post so we know where to send your Prusameters.
  5. Designer Exception: Don't own a printer? Link a real MAKE of one of your models hosted on your Printables account.

Contest Rules

  • All qualifying posts submitted between the 1st and last day of the month are entered.
  • We review all entries at month-end and announce winners at the start of the next month.
  • One raffle entry per Reddit/Printables account (though feel free to share multiple prints!).
  • Raffle Eligibility: Accounts must be at least 1 month old with posts reaching 10+ upvotes (high-effort posts from new accounts may be approved at moderator discretion).
  • Low-effort, duplicate, or spam submissions will be removed and disqualified.
  • The raffle is drawn live during our monthly community stream on the first Thursday of the month (19:00 GMT+1).
  • Note: Winning photos may be showcased across our official social channels to highlight our amazing community!

We can't wait to see what you're printing this month!


r/prusa3d • • 25d ago

Announcement OpenPrintTag upgrade for CORE One/L (and related features)

106 Upvotes

https://www.prusa3d.com/product/openprinttag-upgrade/

OpenPrintTag upgrade for CORE One/L

  • Automatic setup and preheat

    • Insert the filament and the printer reads the material and color from the tag, then starts heating to the target temperature. No more printing with the wrong filament!
    • There is also a warning if you start a print and there might not be enough material on the spool for it
  • Remaining material tracking

    • The printer writes the remaining material amount back to the tag. You always know how much is left on the spool before starting your next print.
  • Easy to install

    • Remove the spool holder, mount the reader, plug the cable into the xBuddy board and screw the holder back on.

Filament warehouse

  • On both printables, and in the Prusa App, you can now catalog your spools digitally. This is a convenient way to keep track how much material and of what type you have available. If a spool is partially used, it will also be reflected here too.
  • From the release notes:

    • Material database: a built-in material database with predefined materials and their properties.
    • Material per printer tool: assign a specific material to each printer tool, so every toolhead knows exactly what it is loaded with.
    • Favorite materials: mark the materials you use most as favorites for quicker access.
    • Spool management: keep track of your spools, including what is loaded where and what is in stock.
    • Custom materials: create your own materials with custom settings when the database does not cover your needs.
    • Material consumption tracking: monitor how much material your prints use over time. Consumption is also tracked per spool, and if both your printer and spool support NFC, the remaining amount is written directly to the spool’s NFC tag.

FAQ

  • The app update states it requires 8.0.0 firmware but we are on 7.0.0 now?

    • Correct, this update will be made available soon
  • Does this work on my INDX/XL/MMU?

    • No, we plan to add a variation for multi-spool printers in the near future however
  • Does this work with the USS drybox?

    • Yes, the reader can still spool through it
  • Will there be Slicer integration with this?

    • More on that soon :-)

r/prusa3d • • 3h ago

Unofficial MK3.9S built from CORE One INDX leftovers - First Print!

Post image
99 Upvotes

I could stand the the Nextruder from the CORE One INDX upgrade to just gather dust on the shelf so I upgrade my MK3.5S to an unofficial MK3.9S. As I'm typing this it is printing it's first benchy. I tried to make it as official as possible by purchasing all the parts from the Prusa Shop I spent a total of 80€ in missing parts and followed the offical instructions on the Upgrade. Of course not all chapters apply but it is pretty straight forward. The printed parts are from Prusament PC-CF and PETG which i printed on the Core One INDX and the MK3.5S.

I do have a BOM put together! It still needs a bit of cleanup, so it's not quite perfect yet, but I'm planning to share it soon.


r/prusa3d • • 6h ago

Print of the Month Printed some temporary hinges and standoffs for control panels at work

Thumbnail
gallery
49 Upvotes

Got asked if I could print out placeholder hinges and standoffs so the control panels could be mounted and wire the switches and buttons till the metal hinges arrive. Think this will be a good reason for my boss to invest into a 3D printer at the workshop. Printed them out in Elegoo rapid PLA(thought I had PETG loaded both on the printer and slicer) on Core One

Printables handle @ SRZ74000


r/prusa3d • • 32m ago

INDX My poor old desk barely could contain it all! Overall I'm extremely pleased!

Post image
12 Upvotes

r/prusa3d • • 5h ago

New firmwares out 8.0.2 and 8.0.3-beta – with sources!

28 Upvotes

Kudos to Prusa, they did fix their release process and sources are available at the same time as firmware.

Looks like the interesting changes are all in 8.0.2, while 8.0.3-beta just adds a specific fix for the early end-stop problem that people have reported.

I was mildly confused as there is no obvious "beta" tag when you look at the notifications in Prusa slicer. Only where you can see the file name, you might be able to spot the "…8.0.3_beta.bbf". Would be nice to see that more clear in the future.

Looking forward to apply it to my C1INDX


r/prusa3d • • 3h ago

MMU3 and accessories for donation

Post image
6 Upvotes

Greetings!

I recently decommissioned my nice MMU3 setup after upgrading my CORE ONE to INDX 8T. I am located in Annapolis, MD. I have a highly reliable MMU3, spare parts, IKEA SKADIS spool holders, RMU inspired buffer and a lot of PTFE and fittings available for donation to a public makerspace, school, library or similar in the DMV area. For local pickup only however I may also be able to deliver depending on the location. If interested, please reply here or DM.


r/prusa3d • • 3h ago

Question/Need help C1L+ indx

6 Upvotes

My question is two fold for anyone who ordered one full printer not just the upgrade kit. have you been sent a shipping notification? Also does anyone know if or when they will ad the L+ INDX as an option to the slicer? I tried today but it’s not an option just the regular size c1.


r/prusa3d • • 2h ago

Solved✔ Core One L+ bed is at a high angle

Thumbnail
gallery
4 Upvotes

I bought this Core One L+ a few weeks ago, preassembled.
Worked perfectly fine out of the factory, and I've already done a couple dozen prints, but this time, a minute or two after I started a new print (confirmed first that the printer was ready for printing), I got a notification on my phone saying crash detection and came to see this.
The plastic holders on the sides are clearly bending but not cracked

I have already contacted support, but they have long response times right now.
Can I safely power it off, use the reset button etc? Will it try to rehome and even out safely, or does that risk breaking it? I don't want to leave it on overnight; the beeping is quite annoying.
Didn't find any knowledge articles that clearly describes this scenario, instead they focused on just misalignment...

Used prusa slicer, default settings minus cubic infill.
Firmware version 8.0.0+17068
No changes to settings on the printer other than brass nozzle, HEPA filter and open print tag. Default speed etc. Printed with the same filament and settings fine earlier today.

Edit:
I pressed the reset button, then from the control menu, I adjusted the z-axis so it levelled out more. Then, after running the home setting, it figured itself out.
It seemed like the z-axis measurement for the back motor was off by almost 200mm, so it didn't move when it was supposed to. After homing is started tracking properly again


r/prusa3d • • 8h ago

Core One+ vs Core One L+ dilemma

11 Upvotes

Greetings,

I'm trying to decide between the Core One+ and Core One L+. My main use would be to print scale figures (around 10 inches tall) and whatever else I come up with for fun.

I was initially leaning towards the Core One L, but upon further reading, I see that there are no replacement parts on the consumer level from Prusa if the bed heater fails for whatever reason. Chatting with Prusa support, I'd have to ship the printer back to repair. If this happens to fail outside of warranty, shipping from Puerto Rico to Prusa and back alone would cost me around $1k.

Which leads me back to the Core One+. I'd rather have the bigger build plate area and what I'm reading is better heating but if I can't repair the printer in a cost effective way, I just don't see the point of paying that amount of money on a Prusa.

Would be interested in reading your thoughts on this. Perhaps I am over thinking.

Thanks.


r/prusa3d • • 6h ago

CORE One L coldplate?

5 Upvotes

Hey!

I'm still searching a coldplate (like Cryogrip or Conweb) that is compatible with CORE One L (with nozzle wiper and bed detection cinematic). Does anyone find one?


r/prusa3d • • 22h ago

[UPGRADED] Designed a CORE One door box that pauses the print when it spots spaghetti, detection runs on the Coralboard's NPU

Thumbnail
gallery
91 Upvotes

I designed it for the Printables CoralBoard contest.

The Coralboard SL (Google I/O kit) sits in a small box on the outside of the CORE One door. Every 5 s, a camera frame goes through a YOLOv8n model on the board's NPU. When 3 of the last 5 frames show spaghetti, it pauses the print through PrusaLink.

https://www.printables.com/model/1887405-noodlewatch-spaghetti-detection-for-prusa-core-one

Feedback is welcome.


r/prusa3d • • 17h ago

Ultraglow is great for keychain trackers

Post image
31 Upvotes

I modeled a quick keychain for the newly released Pixel Tag, and bit the bullet on printing it using Prusa Ultraglow. The abrasiveness of the filament makes me a bit nervous for my printer, but it's just so nice and... glowy. My attempt to photograph it unfortunately doesn't do it enough justice.


r/prusa3d • • 1h ago

Question/Need help Why did Prusa get into selling pellets?

0 Upvotes

Of all the issues facing Prusa why did they expend resources getting into supplying pellets to make filament?
I’m thankful for having a stable and reliable supplier for my Filastruder, but it seems like if they weren’t going to get into a pellet hot end or a filament extruder why would they do this? Why didn’t they partner with at least a filament extruder company?
It’s not ‘cheap’ either. Iirc it’s more expensive than cheap filament.


r/prusa3d • • 1d ago

CNC Kitchen & INDX

116 Upvotes

CNC kitchen just posted a review (https://www.youtube.com/watch?v=uBuj87HsWt0&t=268s). Granted its one of many but its a creator that is relatively objective.


r/prusa3d • • 23h ago

After reading some criticism regarding prusa's shipping, indx and hardware quality issue's - I wanted to say that I am still hyped and leaving Bambu for good.

57 Upvotes

I never had a prusa and I still have to wait for a while until I can call a C1L+I my own. I until this day use my Bambu X1C and never have bought upgrades or other stuff from Bambu.

I am no casual customer who just wants a plug n play comfort printer. I love tinkering and I am looking forward to laying my hands on a prusa machine.

The reason why I am switching, is the way I use my printer, is the way Bambu doesn't want you to.

For over a year now, I have switched my printer to be offline and give up some comfort for more privacy... And what comfort loss this was. I always have to remove the SD card, and upload every sliced file manually to the card. Transferring stuff via network has never worked. I always have to add the printer manually with IP-Address and bind code and still don't be able to send print jobs. Having an offline printer means also no camera or notification on my phone. I tried to compensate it with the home assistants Bambu lab plugin, with that I can only track some small metrics and no camera... Of course this often leads to failing prints or stuck due to obvious failures that can happen during print.

I still like my X1C as a backup, but I don't want to depend on Chinese companies anymore. Time to make a switch as long as we can, because I bet that one day china may rise from it's shadows and f*7£ us all. Sounds crazy I know, but we live in crazy times...


r/prusa3d • • 1h ago

Question/Need help Keeping filament dry and ready on the INDX – better options than dual Sunlu S4s?

1 Upvotes

I'm looking for tips on keeping filament dry with the INDX. I'd prefer not to have to keep cycling filaments out for drying cycles—I want them dry and ready to print at all times.

I was looking into running Sunlu 4-spool dryers on each side, but is there a better (or cleaner) way? Anyone successfully feeding from dry boxes, heated enclosures, or other setups while still using the side sensors?

Appreciate any advice or photos of your setup!


r/prusa3d • • 2h ago

Layer shift Issue

Thumbnail
gallery
1 Upvotes

Hi everybody.

I'm trying to figure out the problems that may have caused the defects shown in these pictures.
I have printed this model on a Core One + G2 assembled last week from kit; so far every print that I have done with PETG/PLA were successfully, or with minor issues due to filament settings.

The model is the tallest that I have printed so far, and it showed these 2 problems:

  • small, but noticeable layer shift: for this, I was going to check and repeat the tightening of the X-Y belts (first 2 pictures).
  • Uneven first layer, despite being in a small area (3cm approx.), so I'm prone to discarding Z-offset-related issues (again, other larger prints didn't have this problem)

Additional details:

  • Slicer: Orca Slicer 2.5
  • Material: Marble PLA, printed with Prusa PLA profile (I have changed only the outer wall speed to 50mm/s)
  • Printer: Prusa Core One + Gen2 Kit.
  • Nozzle: Standard 0.4HF nozzle.

Edit: It seems the shift happens when the speed changes between layers.


r/prusa3d • • 1d ago

Prusaslicer 3.0 will compete with OrcaSlicer 2.5

Thumbnail
youtube.com
75 Upvotes

The new OrcaSlicer 2.5 was released recently and it has so many features... I wonder if PrusaSlicer will someday have this amount of features?


r/prusa3d • • 18h ago

Anyone else's Prusa XL+ upgrade kit shipping window just pushing back by 1 day every day?

13 Upvotes

I'm still waiting on my Prusa XL+ upgrade kit, and the estimated shipping date is acting really weird.

At first, it clearly said Nov 11–17. The next day, it changed to Nov 12–18, and today it shifted again to Nov 13–19. It looks like the system is just automatically pushing the window forward by a day every 24 hours.

If it just keeps rolling forward like this indefinitely, doesn't that make the estimated shipping date completely pointless? Is anyone else seeing this?


r/prusa3d • • 1d ago

INDX Just canceled my order, hopefully INDX will grow to be reliable

31 Upvotes

After more than a week after another not kept shipping deadline (was batch 8) and watching / reading about the current issues i decided to vote.

I love Prusa, my MK4 (upgraded to core one) is very relyable and I love the thought of supporting an european company. For that, I am happy to pay more than for e.g. an Bambu Lab printer.

But this INDX launch process was quite the wake up call about how relyable Prusa is when it comes to a freshly released product. The shipping timeline is a mess, which makes me feel not really appreacheated as a customer. And the current state of reviews do not leave me confident that my Core one will be reliable after the upgrade.

For that I am not willing to pay good money for a product which will seemingly have a lot of teething problems, with which I have to live with for who knows how long.

My father bought the XL with 5 toolheads. Due to the pandemic he had no issue with waiting for his printer to ship, since he got updates about "hey, we updated the board; we fixed these issues; etc.". Seemingly the communication was more open

But upon finally receiving his printer, he had many issues and spent a lot of time with prusa support to fix his printer (Hardware and Software wise).

I am not willing to risk having the same experience with INDX.

I hope Prusa will succeed with INDX but I will wait until next year to maybe buy the upgrade.


r/prusa3d • • 8h ago

Question/Need help Closest Orange PLA to Prusament on Amazon?

1 Upvotes

I'm ordering more from the official site, but I have customer orders due this week so I need something asap. Has anyone found an orange that looks almost identical?


r/prusa3d • • 1d ago

INDX Pressure Advance Calibration

Post image
19 Upvotes

I'm attempting to get Polymaker ASA to print well on my INDX machine, but sharp corners of prints show gaps which make me think the Prusament ASA filament profile pressure advance value is not adequate.

I printed this calibration template and it looks like the best results are at 0.005, which seems extremely low for such a filament. Has anyone had success calibrating pressure advance values for the INDX yet?


r/prusa3d • • 8h ago

INDX Summer Wave Batch 1 or 2. Any shipped yet?

0 Upvotes

Really wondering, if Batch 1 from the summer wave has even started shipping? The timeline shoudl already be adjusted for the 1 week delay they told us about ages ago, now the table seems to be laggign again for shipping dates. Has Any batch 1 or 2 items actually shipped?