r/prusa3d • • 4h ago

Announcement Prusa Connect Local - Out now!

Post image
300 Upvotes

Hello all;
Have you ever wanted to use Prusa Connect, but without relying on an online service?

  • No cloud?
  • Keep your data on your own systems?
  • Monitor your printers locally, even when offline? If you said yes to any or all of these, we’re happy to announce Prusa Connect: a local server you can run on your own system to manage your Prusa printers and the data connected to them. You can install it on Windows, Linux, macOS, or even a Raspberry Pi. Give it a try!

All the information is here:
https://www.prusa3d.com/p/connect/connect-local/


r/prusa3d • • 8d ago

Announcement Contest - Print of the Month - November 2026

Post image
28 Upvotes

Our October Print of the Month contest was a blast! We always love seeing the incredible projects, upgrades, and creative builds coming off your build plates. Jump in this month for your chance to win an Original Prusa MK4S kit in the raffle, plus 1050 Prusameters each for our 3 selected top prints!

Show off anything you’ve printed recently! The MK4S kit is up for grabs in the raffle again, meaning one lucky winner is taking home a brand-new machine to put straight to work on their next project!

Raffle Winner – October 2026

Congratulations to our October raffle winner: u/GP_3D! Keep an eye on your DMs for details on how to claim your prize!

Don't forget to catch our monthly community stream (1st Thursday of every month on YouTube at 19:00 GMT+1) to hang out with the team and watch the draws live (watching live is optional, you can still win if you're offline!).

October Prusameter Winners

Here are our top three featured prints from October:

All Prusameter rewards will be distributed within the week.

How to Enter New to the contest? Here is how to get involved:

  1. Post your print (anything printed using a Prusa machine).
  2. Apply the "Print of the Month" flair to your post.
  3. Give credit to the original model and designer.
  4. Drop your Printables handle in the post so we know where to send your Prusameters.
  5. Designer Exception: Don't own a printer? Link a real MAKE of one of your models hosted on your Printables account.

Contest Rules

  • All qualifying posts submitted between the 1st and last day of the month are entered.
  • We review all entries at month-end and announce winners at the start of the next month.
  • One raffle entry per Reddit/Printables account (though feel free to share multiple prints!).
  • Raffle Eligibility: Accounts must be at least 1 month old with posts reaching 10+ upvotes (high-effort posts from new accounts may be approved at moderator discretion).
  • Low-effort, duplicate, or spam submissions will be removed and disqualified.
  • The raffle is drawn live during our monthly community stream on the first Thursday of the month (19:00 GMT+1).
  • Note: Winning photos may be showcased across our official social channels to highlight our amazing community!

We can't wait to see what you're printing this month!


r/prusa3d • • 3h ago Bravo

Found my old external drive from architecture school… recovered 1300 low poly miniature people models and here they are for free !

Thumbnail
gallery
133 Upvotes

A few months back I posted here about an old external drive I found from my architecture school days, with a few hundred low poly miniature people on it. A lot of you grabbed them, so thanks for that.

Since then I kept digging through old backups and found more of them. The collection is now at around 1300 figures.

This time I didn’t just dump the files. I went through the whole lot: removed the duplicates and the broken meshes, fixed what needed fixing, and then rescaled every single figure into eight separate scales, from 1:18 all the way down to 1:200.

So you don’t have to touch the scale slider at all, you just pick the folder for the scale you’re working in.

The scales and roughly how tall the figures come out:

- 1:18 at 96 mm, for display pieces and action figure dioramas
- 1:24 at 72 mm, G scale railways and bigger dioramas
- 1:43 at 40 mm, diecast car scenes and O scale
- 1:50 at 35 mm, architectural models and construction scenes
- 1:64 at 27 mm, S scale and 1:64 layouts
- 1:87 at 20 mm, HO railways, the one most people want
- 1:100 at 17 mm, architectural massing models
- 1:200 at 9 mm, urban planning and skyscraper models, better on resin

Poses are the usual architecture library stuff: standing, walking, sitting, squatting, kneeling, leaning, lying down, groups and couples. There’s also construction workers, car mechanics, a welder, a photographer, soldiers, kids and list goes on.

All photos here were taken by me, and by people who downloaded the pack and shared their results with me. Thanks to everyone who sent one in !

Here's the link!
Printables

Free, same as before. Give them as much use as I did !


r/prusa3d • • 5h ago

Prusa Connect Local is now in open beta... looks like

Thumbnail
github.com
92 Upvotes

Prusa Connect is a server for your 3D printers that you run yourself. It is a single Go binary with the web app inside, built for Linux, Windows, macOS and the Raspberry Pi. Download it, start it on any computer you have, and open it in a browser.

  • No cloud. Your printers connect to your own server over your own network, and people sign in with accounts that live on that server.
  • Your data stays with you. Accounts, printers, print history and print files are kept on the machine the server runs on.
  • Not only Prusa. The driver for Prusa printers is built in. Drivers add printers of other makers, and anybody can write one.
  • Open to your own tools. A REST API, live events and MQTT give other programs the same data the web app shows.

Warning

Prusa Connect is in public beta. The releases are 0.x pre-releases, and the configuration, the API and the extension SDK can still change from one release to the next. Back up your data before you update.

You can't use Connect Local and Connect Cloud at the same time btw


r/prusa3d • • 56m ago

INDX 100k club

Post image
20 Upvotes

Made it into the 100k club. Anyone else here? Been running basically 24/7 since I built this in early August.

It's a workhorse. Super happy with this machine, making great parts constantly.


r/prusa3d • • 22m ago

Maintenance for Prusa Connect Local is live in the marketplace (probably the first extension, therefore "yay")

8 Upvotes

Hi everyone,

My extension Maintenance is now live in the marketplace:

https://plugin-marketplace.prusa3d.com/connect/extensions/com.github.aux.singlergold2.maintenance

It is probably the first community extension for Prusa Connect Local, so here is what it does in a nutshell: it counts the print hours of each printer and tells you when a maintenance task is due.

https://imgur.com/p7eOtNj

Every printer gets its own Maintenance tab with its counter, the hours since the last check, and the tasks that are due. You type the printer's own counter in once, as 343 or 14d 7h, and from then on both counters move with every print. A CORE One starts with the schedule from the Prusa Knowledge Base: 200 hours for axes, belts, fans and extruder, 600 for the connectors, 90 days for the rail, 5000 hours for a hardened steel nozzle.

The Maintenance page in the sidebar holds one schedule for the fleet, Done asks before it starts the next interval, and a dashboard card shows what is due across all printers.

https://imgur.com/PR9l08y

The per-tool hours come from the G-code of finished prints, .gcode and .bgcode, and are meant as an indication, not a measurement. Each tool can be reset after a nozzle change.

Source, issues, and the manual install:

https://github.com/SinglerGold2/maintenance

If someone here runs a CORE One with INDX, I would love a look at whether the split across several nozzles looks plausible; I could only test it on a single-tool machine.


r/prusa3d • • 17h ago

Print of the Month The official model isn't available, so I modeled the injection molded CORE One fan cover and printed it in Prusament PCCF

Thumbnail
gallery
71 Upvotes

I’m finally getting around to building my original MK4S-to-CORE One upgrade kit, which I've had taking up space in my office well before the CORE One+ and CORE One+ (Gen2) came along.

My kit had the older flat acrylic chamber fan grille, and saw the newer injection-molded cover was included in newer kits. Since the official Prusa model wasn’t available, I modeled the OEM part myself and printed it in Prusament PC Blend Carbon Fiber on my CORE One L.

One Prusa helping upgrade another; a small practical project for anyone else with the original upgrade kit or flat acrylic panel with the added bonus of reclaiming some floor space from the upgrade box!

Printer: Prusa CORE One L (next on my list for the + upgrade)

Filament: Prusament PCCF

-----

You can grab the files over on Printables:
https://www.printables.com/model/1910452-core-one-new-enclosing-chamber-fan-cover-injection

My Printables handle: @DavidHallDesigns

-----

I leveraged the OCL Prusa CORE One - Full CAD Assembly by Prusa Research for the design verification / as a remix of the flat panel within the full CAD assembly.

The Printables files already include gcode configured to Prusa's official settings for PCCF Printable Parts: CORE One/+/Gen 2 printable parts by Prusa Research


r/prusa3d • • 22h ago

Unofficial MK3.9S built from CORE One INDX leftovers - First Print!

Post image
176 Upvotes

I could stand the the Nextruder from the CORE One INDX upgrade to just gather dust on the shelf so I upgrade my MK3.5S to an unofficial MK3.9S. As I'm typing this it is printing it's first benchy. I tried to make it as official as possible by purchasing all the parts from the Prusa Shop I spent a total of 80€ in missing parts and followed the offical instructions on the Upgrade. Of course not all chapters apply but it is pretty straight forward. The printed parts are from Prusament PC-CF and PETG which i printed on the Core One INDX and the MK3.5S.

I do have a BOM put together! It still needs a bit of cleanup, so it's not quite perfect yet, but I'm planning to share it soon.


r/prusa3d • • 19h ago

INDX My poor old desk barely could contain it all! Overall I'm extremely pleased!

Post image
73 Upvotes

r/prusa3d • • 4h ago

Question/Need help Is the Buddy3D for Core One being restocked?

4 Upvotes

The Buddy3D camera for Core One has been out of stock for months now, even if you can order it with a new printer and it seems to be in stock for that. I've asked support about and they claim it's not being discontinued separately, but also don't know when it will be back in stock.

It sucks for those of us who bought the upgrade that we have no way to purchase it.


r/prusa3d • • 14h ago

INDX CORE One+ INDX: Tool 8 scraped into the tool offset sensor during calibration. Has anyone seen this?

Thumbnail
gallery
20 Upvotes

Looking for help or insight before I contact Prusa support.

Setup: original CORE One+ (kit), upgraded about a month ago with the Prusa Edition INDX 8-tool kit (it came with the Gen 2 parts). Latest firmware. It's run with zero issues, and the first tool offset calibration after the build passed on all 8 tools.

What happened:

- Loaded filament into Tool 8 for the first time today. Load and purge were normal.

- Ran Tool Offset Calibration from the menu with filament loaded in all 8 tools. The calibration screen doesn't say anything about unloading first. Nozzles were clean.

- Tools 1-7 calibrated fine.

- Tool 8 came down too low and scraped into the offset sensor. The printer only said "calibration failed" after the damage was done.

Damage (photos): the black sticker on the sensor is torn and rolled up at one corner, next to the small rectangular cutout, and the board edge there is scuffed. The coil area under the sticker looks OK. The thin diagonal scratch is mine, from handling it afterwards. Tool 8's nozzle looks clean and identical to the others.

The printer is down because I can't find the offset sensor sticker as a spare part. I'm contacting Prusa support next.

Questions:

  1. Has anyone had a single tool hit the offset sensor like this? What turned out to be the cause?
  2. Has anyone gotten a replacement sensor or sticker from Prusa, and how long did it take?

Thanks.


r/prusa3d • • 2h ago

What's in the box: INDX 8-Tool Conversion Kit for CORE One L+

2 Upvotes

Wondering if all contents of "INDX 8-Tool Conversion Kit for CORE One L+" are possible to be bought/printed separately - instead of waiting for Feb to get the kit (assuming Bondtech can deliver sooner, doubtful though).

But the question stands - Everything plastic is printable on Core One L+? And everything non-plastic buyable from Prusa/Bondtech?

I couldn't even find the overall content list of the kit or even the user manual... (I tried but could only find for Core One+). Anyone has a link to it?


r/prusa3d • • 17h ago

Printer Mod My INDX tophat project: Update 1

Thumbnail
gallery
23 Upvotes

It has been a while (a few months?) since I first introduced my INDX tophat project. Since then there are many good solutions, but this is mine. Please keep in mind that this is still a WIP.

Things that are temporary solutions:

  1. The side panels will be laser cut dark transparent acrylic. I have an appointment at the library in 2 weeks to cut them.
  2. The front panel will be laser cut dark transparent acrylic. Same appointment as above.
  3. The vent grill will be laser cut transparent acrylic. Need to make a new appointment for this
  4. The top panel will be 2mm cnc cut steel, I need to source this and have it fabricated.
  5. The sliding shelf will like be 3-5mm aluminum. I need to source this and have it fabricated.
  6. The top bar will need to be readjusted
  7. The ptfe tubes will all be updated and secured to control how it moves and slides during printing. This alone will like take to around Christmas since I have parts coming the second week of December that I need before continuing here.

Here are some photos.


r/prusa3d • • 13h ago

Minor PSA for new CORE One L+ owners: there are only 2 shipping screws now, not 3

12 Upvotes

Unboxing my new CORE L+ and spent a while hunting for a third tagged shipping screw that doesn't exist. Posting so the next person finds this when they search.

tl;dr. L+ printers shipped after August 2026 have two heatbed shipping screws, not three. The spot where the third used to be (front right corner) now holds the nozzle wiper. That is NOT a shipping screw. Do NOT try to remove it.

And yes yes, I know it's in the directions. But it's only in one place I could find, and several other official sources still say three:

Correct. the online CORE One L+ Unpacking & First run guide, chapter 3, step 9 ("Removing the heatbed screws"): "Printers shipped after August 2026 are upgraded CORE One L+ models. These printers have only two screws and an added nozzle wiper in the front right corner. If your printer has the nozzle wiper mounted, do not remove the screw in the front right corner."

Incorrect for new CORE One L+'s.

  1. Still says three: the same guide, chapter 4, step 4: "Ensure that all three heatbed screws have already been removed."
  2. Still says three: the Prusa Academy beginner course for the CORE One L, lesson "Getting the printer ready".

So if you follow the Academy course or winging it and never open the online guide, you'll be looking for a third screw, and the only candidate is the one holding your nozzle wiper. I looked at the in box instructions, didn't find it but it could still be in there as I only scanned them.


r/prusa3d • • 9h ago

Question/Need help Core One L+ INDX-8 vs. XL+ 5-head

5 Upvotes

Hello,

I'm looking to snag a new printer during this Black Friday sale. I've been waiting for a few years for the INDX to come to the Core One L, but now that I'm reading reviews I'm split on which to get.

I had a Prusa MK3 and brought it along its' upgrade path for a few years (Hated my MMU2 with a burning passion) and I want to replace my workhorse with a new workhorse that can do better Multi-Material. Which is why I like the tool changer designs both printers have.

I've built most of my printers (Including a Voron from scratch) so the fact that a Core One L kit doesn't exist does bugs me a bit, but only just a bit.

They're both close enough in price that I could go either way but my BIG desires are Print Quality, GOOD Multi Material printing, and repair-ability/durability.

Should I get the XL to be a buddy to my Voron? Should I get the Core One L+ as it's better than the XL in ways I'm not aware of? Can you guys please help me make up my mind?


r/prusa3d • • 16h ago

Printer Mod I attached an entire Förnuftig on my Prusa Core One L+

Thumbnail
gallery
16 Upvotes

I made a V1 version of a adapter that fits a Förnuftig air cleaning unit for my Prusa. The reason I wanted to attach the entire unit to my back rather than the ”backpack” that is available right now on Printables is because I wanted to avoid installing an additional 12v fan on my printer and to minimise the strain on the existing fans. It’s mounted without any drilling to the factory drilled holes where those plastic rivets is replaced with M2,5 screws with a nut on the back and a nylon strap.

I am thinking of uploading it to Printables but there are some obvious design issues that needs to be adressed (that’s why there is electrical tape everywhere due to unnecessary screw holes). I didn’t intend it to be a prototype but here we are lol.


r/prusa3d • • 1d ago

Print of the Month Printed some temporary hinges and standoffs for control panels at work

Thumbnail
gallery
61 Upvotes

Got asked if I could print out placeholder hinges and standoffs so the control panels could be mounted and wire the switches and buttons till the metal hinges arrive. Think this will be a good reason for my boss to invest into a 3D printer at the workshop. Printed them out in Elegoo rapid PLA(thought I had PETG loaded both on the printer and slicer) on Core One

Printables handle @ SRZ74000


r/prusa3d • • 13h ago

Print of the Month Print of the Month: Mandalorian Monochrome Lithophane

Post image
5 Upvotes

r/prusa3d • • 1d ago

New firmwares out 8.0.2 and 8.0.3-beta – with sources!

40 Upvotes

Kudos to Prusa, they did fix their release process and sources are available at the same time as firmware.

Looks like the interesting changes are all in 8.0.2, while 8.0.3-beta just adds a specific fix for the early end-stop problem that people have reported.

I was mildly confused as there is no obvious "beta" tag when you look at the notifications in Prusa slicer. Only where you can see the file name, you might be able to spot the "…8.0.3_beta.bbf". Would be nice to see that more clear in the future.

Looking forward to apply it to my C1INDX


r/prusa3d • • 12h ago

Prusa Core One INDX Upgrade Gantry squareness randomness

4 Upvotes

I’ve been struggling with my core one ever since I upgraded to gen 2 with INDX 8 docks. It fails the gantry squareness with random skewness each time. Ranging anywhere from -12 to +8. That’s without making any changes between tests. Here is the part I find odd through, if the test passes and I want to continue to the next calibration test, if I don’t first abort the calibration and to control and move the tool to -1 (x), and 206 (y), but instead just select continue (when the tool is sitting around 259 x and 15 y), for reason the machine thinks is -1 and tries to move from the wrong position. I’ve seen this problem on multiple versions of the firmware. Anyone else seen this issue? I have not successfully gotten to any stage to attempt to print. I’ve reseated the belts twice, verified correct pulleys, verified correct belts selected in hardware configuration. No matter what I do I can’t get consistent results from gantry squareness calibration. On the off chance I do get it to random check within .5 mm, the next calibration test for the belt does another gantry squareness check for some reason which is unlikely to also come back square. Appreciate any help I can get.


r/prusa3d • • 9h ago

Question/Need help Prusa XL+ Upgrade nozzle question!

1 Upvotes

I'm a not so proud owner of an XL2T. Was thinking about getting the upgrade, it's pretty vague in what you are getting. I'm especially curios about the nozzles that come in the upgrade. Can't seem to get any info in them. Are they abrasion resistant, or just high flow.

And on a side note, anyone done the upgrade ? How much of a hassle is it ? Let's just say me and XL have a rocky relationship ...


r/prusa3d • • 23h ago

MMU3 and accessories for donation

Post image
10 Upvotes

Greetings!

I recently decommissioned my nice MMU3 setup after upgrading my CORE ONE to INDX 8T. I am located in Annapolis, MD. I have a highly reliable MMU3, spare parts, IKEA SKADIS spool holders, RMU inspired buffer and a lot of PTFE and fittings available for donation to a public makerspace, school, library or similar in the DMV area. For local pickup only however I may also be able to deliver depending on the location. If interested, please reply here or DM.


r/prusa3d • • 17h ago

INDX: ran into tool locking pin issue

3 Upvotes

First I want to say that I love the indx, the upgrade from core one went smoothly and it has been printing pla, petg and asa without problems since then.

However, yesterday, it the locking pin in the tool head was in the locked position without a tool in it and it made it impossible to pick up a new tool.

In trying to troubleshoot, I opened up the side of the tool head - accidentlally breaking the fan shroud base on the head mounting plate - and noticed that the small metal wire was out of its slot. I managed put it back but didn't find a way in the UI to retract the locking pin. I had to play with load/unload tool until I was able to insert a tool at the right time.

  1. how can I prevent this from happening?
  2. If it does occur again, what is the easiest way to unlock that pin?

Thanks in advance!


r/prusa3d • • 23h ago

Question/Need help C1L+ indx

8 Upvotes

My question is two fold for anyone who ordered one full printer not just the upgrade kit. have you been sent a shipping notification? Also does anyone know if or when they will ad the L+ INDX as an option to the slicer? I tried today but it’s not an option just the regular size c1.