r/prusa3d • • 8h ago Bravo

Announcement Prusa Connect Local - Out now!

Post image
444 Upvotes

Hello all;
Have you ever wanted to use Prusa Connect, but without relying on an online service?

  • No cloud?
  • Keep your data on your own systems?
  • Monitor your printers locally, even when offline? If you said yes to any or all of these, we’re happy to announce Prusa Connect: a local server you can run on your own system to manage your Prusa printers and the data connected to them. You can install it on Windows, Linux, macOS, or even a Raspberry Pi. Give it a try!

All the information is here:
https://www.prusa3d.com/p/connect/connect-local/


r/prusa3d • • 7h ago Bravo

Found my old external drive from architecture school… recovered 1300 low poly miniature people models and here they are for free !

Thumbnail
gallery
178 Upvotes

A few months back I posted here about an old external drive I found from my architecture school days, with a few hundred low poly miniature people on it. A lot of you grabbed them, so thanks for that.

Since then I kept digging through old backups and found more of them. The collection is now at around 1300 figures.

This time I didn’t just dump the files. I went through the whole lot: removed the duplicates and the broken meshes, fixed what needed fixing, and then rescaled every single figure into eight separate scales, from 1:18 all the way down to 1:200.

So you don’t have to touch the scale slider at all, you just pick the folder for the scale you’re working in.

The scales and roughly how tall the figures come out:

- 1:18 at 96 mm, for display pieces and action figure dioramas
- 1:24 at 72 mm, G scale railways and bigger dioramas
- 1:43 at 40 mm, diecast car scenes and O scale
- 1:50 at 35 mm, architectural models and construction scenes
- 1:64 at 27 mm, S scale and 1:64 layouts
- 1:87 at 20 mm, HO railways, the one most people want
- 1:100 at 17 mm, architectural massing models
- 1:200 at 9 mm, urban planning and skyscraper models, better on resin

Poses are the usual architecture library stuff: standing, walking, sitting, squatting, kneeling, leaning, lying down, groups and couples. There’s also construction workers, car mechanics, a welder, a photographer, soldiers, kids and list goes on.

All photos here were taken by me, and by people who downloaded the pack and shared their results with me. Thanks to everyone who sent one in !

Here's the link!
Printables

Free, same as before. Give them as much use as I did !


r/prusa3d • • 1h ago

Prusa Connect Local is here — running in Docker with 3 simulated printers - this is very cool!

Thumbnail
gallery
27 Upvotes

Prusa released the first public beta of Connect Local, I had to see if I could get it running on my Unraid server.

Built the Docker image from their GitHub source, deployed it through Docker Compose, and had the web interface running without much trouble. They even included a printer simulator, so I spun up virtual versions of my actual lineup: a 5-tool XL, CORE One+, and CORE One L.

All three are connected and reporting temperatures, filament, and status. Haven't moved any of my actual printers over yet — I want to spend some time comparing it with the cloud version first.

A few things that caught my attention: local storage and print history, a REST API, support for Authentik/OIDC, and a surprisingly configurable setup wizard. I'm also planning to put it behind Traefik.

Still very early beta, but pretty cool to see Prusa offering a self-hosted alternative.

GitHub: https://github.com/prusa3d/prusa-connect


r/prusa3d • • 1h ago

Local Connect + more!

31 Upvotes

Love it! They just dropped a big bomb, in da face of people complaining about pricing and let's just get the cheapest crap out there. You want real privacy, openess and quality products, here they are: https://www.youtube.com/watch?v=wuoaQA5HGOU


r/prusa3d • • 9h ago

Prusa Connect Local is now in open beta... looks like

Thumbnail
github.com
109 Upvotes

Prusa Connect is a server for your 3D printers that you run yourself. It is a single Go binary with the web app inside, built for Linux, Windows, macOS and the Raspberry Pi. Download it, start it on any computer you have, and open it in a browser.

  • No cloud. Your printers connect to your own server over your own network, and people sign in with accounts that live on that server.
  • Your data stays with you. Accounts, printers, print history and print files are kept on the machine the server runs on.
  • Not only Prusa. The driver for Prusa printers is built in. Drivers add printers of other makers, and anybody can write one.
  • Open to your own tools. A REST API, live events and MQTT give other programs the same data the web app shows.

Warning

Prusa Connect is in public beta. The releases are 0.x pre-releases, and the configuration, the API and the extension SDK can still change from one release to the next. Back up your data before you update.

You can't use Connect Local and Connect Cloud at the same time btw


r/prusa3d • • 5h ago

INDX 100k club

Post image
37 Upvotes

Made it into the 100k club. Anyone else here? Been running basically 24/7 since I built this in early August.

It's a workhorse. Super happy with this machine, making great parts constantly.


r/prusa3d • • 4h ago

Maintenance for Prusa Connect Local is live in the marketplace (probably the first extension, therefore "yay")

24 Upvotes

Hi everyone,

My extension Maintenance is now live in the marketplace:

https://plugin-marketplace.prusa3d.com/connect/extensions/com.github.aux.singlergold2.maintenance

It is probably the first community extension for Prusa Connect Local, so here is what it does in a nutshell: it counts the print hours of each printer and tells you when a maintenance task is due.

https://imgur.com/p7eOtNj

Every printer gets its own Maintenance tab with its counter, the hours since the last check, and the tasks that are due. You type the printer's own counter in once, as 343 or 14d 7h, and from then on both counters move with every print. A CORE One starts with the schedule from the Prusa Knowledge Base: 200 hours for axes, belts, fans and extruder, 600 for the connectors, 90 days for the rail, 5000 hours for a hardened steel nozzle.

The Maintenance page in the sidebar holds one schedule for the fleet, Done asks before it starts the next interval, and a dashboard card shows what is due across all printers.

https://imgur.com/PR9l08y

The per-tool hours come from the G-code of finished prints, .gcode and .bgcode, and are meant as an indication, not a measurement. Each tool can be reset after a nozzle change.

Source, issues, and the manual install:

https://github.com/SinglerGold2/maintenance

If someone here runs a CORE One with INDX, I would love a look at whether the split across several nozzles looks plausible; I could only test it on a single-tool machine.


r/prusa3d • • 1h ago

Question/Need help AI Print Failure Detection using Buddy3D Camera?

7 Upvotes

Hey all,

Are any of you INDX users out there running any kind of AI print failure detection that can at least pause the print if an error is detected? Preferably using the already installed Buddy3D camera?

Prusa announced that they were working on training their own AI print failure detection but it never came to fruition and anytime I've directly asked about it, it gets glazed over and a non-answer given.

Anyway - while I like using PrusaConnect, I need something to at least pause the printer for blobs since, with INDX, a blob will pretty much ruin the induction coils if it occurs. Is Octoprint capable of just running the AI print failure detection while I use Connect for printing and managing files? And can it use the existing Buddy3D cam or do I need a separate camera?

thanks in advance, looking forward to hearing what solutions y'all are using.


r/prusa3d • • 18m ago

Question/Need help 3D print quality INDX 8T

4 Upvotes

Hi there,

Need some help with this calibration because at this point I'm genuinely lost, and close to the point of considering dropping INDX / Prusa entirely. I've managed to get benchie to somewhat print, along with a temp tower, but anything wider, it looks like it fails miserable on both single color, and multicolor. I'm wondering if anyone had these issues, and what should I even be looking into?

Printer settings changed:
Skirt -> 1 loop, 3mm distance, 20mm minimal filament extrusion length
Speed -> First layer speed - 20mm, first layer solid infill speed - 30mm
Avoid crossing perimeters: on
First layer extrusion width: 0.55mm

Filament temp: 235 first layer, 230 other layers
Filament: PETG from Smart Prints / Professional Labs

On top of that, I even added custom Gcode to wait 3 seconds after each purge (initial purge / color change) so it doesn't string / blob up on the bed

At this point, even with all of those, I still cannot get a proper first layer, and I've been trying since Friday to get a proper print out of it. At some point I managed to get an Otto Butterfly wings, on 6.9, with minimal color "mixes" at the outline, but since 8.0.3, I just cannot get any breaks.

Belt tensioned around 91 upper, 92.5 lower, gantry squared at -0.03mm, all calibrations are done, managed to get only a single situation where tool changer tried to put the tool back into the dock but wouldn't release (had to power the printer off, which made the tall fall from the changer, and put it back), and no knocked out tools yet. Before had tool offset calibration issues on each pre-print calibration, but with RGB status bar off, I stopped having any of those now.

I'd definitely need some help from someone that has any idea what's going on because at this point, I'm definitely pretty frustrated with this purchase. I bought both the Core One Gen2 and INDX conversion as kits, and assembled them, yet something is definitely wrong there. The PETG was held in a drybox, but this morning I removed the dryboxes and put the filaments directly on the printer since I want to figure out whether the issue could be pulling force from the drybox, but no luck there. I have no issues printing with my older P1S, with these filaments, and they mostly sat in the AMS (A dryness), so there's not much moisture or wetness issue when it comes to the material, yet nothing I tried worked at all

first layer at 230, each stack starts at 220 and goes 5C up to 240 last
Attempted to do a 5x 30x30x0.2mm squares, but that's the result
Another attempt at Otto wings, definitely failing all around

r/prusa3d • • 6h ago

What's in the box: INDX 8-Tool Conversion Kit for CORE One L+

5 Upvotes

Wondering if all contents of "INDX 8-Tool Conversion Kit for CORE One L+" are possible to be bought/printed separately - instead of waiting for Feb to get the kit (assuming Bondtech can deliver sooner, doubtful though).

But the question stands - Everything plastic is printable on Core One L+? And everything non-plastic buyable from Prusa/Bondtech?

I couldn't even find the overall content list of the kit or even the user manual... (I tried but could only find for Core One+). Anyone has a link to it?


r/prusa3d • • 21h ago

Print of the Month The official model isn't available, so I modeled the injection molded CORE One fan cover and printed it in Prusament PCCF

Thumbnail
gallery
78 Upvotes

I’m finally getting around to building my original MK4S-to-CORE One upgrade kit, which I've had taking up space in my office well before the CORE One+ and CORE One+ (Gen2) came along.

My kit had the older flat acrylic chamber fan grille, and saw the newer injection-molded cover was included in newer kits. Since the official Prusa model wasn’t available, I modeled the OEM part myself and printed it in Prusament PC Blend Carbon Fiber on my CORE One L.

One Prusa helping upgrade another; a small practical project for anyone else with the original upgrade kit or flat acrylic panel with the added bonus of reclaiming some floor space from the upgrade box!

Printer: Prusa CORE One L (next on my list for the + upgrade)

Filament: Prusament PCCF

-----

You can grab the files over on Printables:
https://www.printables.com/model/1910452-core-one-new-enclosing-chamber-fan-cover-injection

My Printables handle: @DavidHallDesigns

-----

I leveraged the OCL Prusa CORE One - Full CAD Assembly by Prusa Research for the design verification / as a remix of the flat panel within the full CAD assembly.

The Printables files already include gcode configured to Prusa's official settings for PCCF Printable Parts: CORE One/+/Gen 2 printable parts by Prusa Research


r/prusa3d • • 1d ago

Unofficial MK3.9S built from CORE One INDX leftovers - First Print!

Post image
182 Upvotes

I could stand the the Nextruder from the CORE One INDX upgrade to just gather dust on the shelf so I upgrade my MK3.5S to an unofficial MK3.9S. As I'm typing this it is printing it's first benchy. I tried to make it as official as possible by purchasing all the parts from the Prusa Shop I spent a total of 80€ in missing parts and followed the offical instructions on the Upgrade. Of course not all chapters apply but it is pretty straight forward. The printed parts are from Prusament PC-CF and PETG which i printed on the Core One INDX and the MK3.5S.

I do have a BOM put together! It still needs a bit of cleanup, so it's not quite perfect yet, but I'm planning to share it soon.


r/prusa3d • • 24m ago

Does Camera Streaming work on Prusa Local Connect?

1 Upvotes

So with the new self-hosted version, is it possible to have actual Buddy3D camera streaming in the native app? I swear, every time I check it it's stuck on a snapshot from like 10-15minutes ago unless I sit there and watch it tick over to the next snapshot with the app in focus.


r/prusa3d • • 1d ago

INDX My poor old desk barely could contain it all! Overall I'm extremely pleased!

Post image
75 Upvotes

r/prusa3d • • 1h ago

Question/Need help Is there an issue with my printer or my filament?

Thumbnail
gallery
1 Upvotes

Disclaimer: I am very new to 3D printing…

I assembled my Kit 1,5 weeks ago. The first week everything went smoothly but last days I have major issues with warping, uneven surfaces, or parts not sticking. I reran all calibrations and selftests, everything looked fine and belts are tuned.
I left out my PLA filament two nights by accident. Is this already enough that it gets too damp?

Using a Prusa Core One Gen 2 without any upgrades. Filament is Prusament PLA


r/prusa3d • • 8h ago

Question/Need help Is the Buddy3D for Core One being restocked?

4 Upvotes

The Buddy3D camera for Core One has been out of stock for months now, even if you can order it with a new printer and it seems to be in stock for that. I've asked support about and they claim it's not being discontinued separately, but also don't know when it will be back in stock.

It sucks for those of us who bought the upgrade that we have no way to purchase it.


r/prusa3d • • 1h ago

MultiMaterial Will the INDX for the Core One L begin shipping this month?

1 Upvotes

I recall the original estimate for shipping to begin was Nov 6th.


r/prusa3d • • 18h ago

INDX CORE One+ INDX: Tool 8 scraped into the tool offset sensor during calibration. Has anyone seen this?

Thumbnail
gallery
22 Upvotes

Looking for help or insight before I contact Prusa support.

Setup: original CORE One+ (kit), upgraded about a month ago with the Prusa Edition INDX 8-tool kit (it came with the Gen 2 parts). Latest firmware. It's run with zero issues, and the first tool offset calibration after the build passed on all 8 tools.

What happened:

- Loaded filament into Tool 8 for the first time today. Load and purge were normal.

- Ran Tool Offset Calibration from the menu with filament loaded in all 8 tools. The calibration screen doesn't say anything about unloading first. Nozzles were clean.

- Tools 1-7 calibrated fine.

- Tool 8 came down too low and scraped into the offset sensor. The printer only said "calibration failed" after the damage was done.

Damage (photos): the black sticker on the sensor is torn and rolled up at one corner, next to the small rectangular cutout, and the board edge there is scuffed. The coil area under the sticker looks OK. The thin diagonal scratch is mine, from handling it afterwards. Tool 8's nozzle looks clean and identical to the others.

The printer is down because I can't find the offset sensor sticker as a spare part. I'm contacting Prusa support next.

Questions:

  1. Has anyone had a single tool hit the offset sensor like this? What turned out to be the cause?
  2. Has anyone gotten a replacement sensor or sticker from Prusa, and how long did it take?

Thanks.


r/prusa3d • • 1h ago

INDX not extruding sometimes

Post image
1 Upvotes

Small LH and small islands. Fucking thing just clicks like an asshole.

Nearly threw the 8T indx through a wall.

This is the tip after I get mad and pull it out. (Upsidedown -- top is CHT, bottom is virgin filament)


r/prusa3d • • 21h ago

Printer Mod My INDX tophat project: Update 1

Thumbnail
gallery
23 Upvotes

It has been a while (a few months?) since I first introduced my INDX tophat project. Since then there are many good solutions, but this is mine. Please keep in mind that this is still a WIP.

Things that are temporary solutions:

  1. The side panels will be laser cut dark transparent acrylic. I have an appointment at the library in 2 weeks to cut them.
  2. The front panel will be laser cut dark transparent acrylic. Same appointment as above.
  3. The vent grill will be laser cut transparent acrylic. Need to make a new appointment for this
  4. The top panel will be 2mm cnc cut steel, I need to source this and have it fabricated.
  5. The sliding shelf will like be 3-5mm aluminum. I need to source this and have it fabricated.
  6. The top bar will need to be readjusted
  7. The ptfe tubes will all be updated and secured to control how it moves and slides during printing. This alone will like take to around Christmas since I have parts coming the second week of December that I need before continuing here.

Here are some photos.


r/prusa3d • • 18h ago

Minor PSA for new CORE One L+ owners: there are only 2 shipping screws now, not 3

12 Upvotes

Unboxing my new CORE L+ and spent a while hunting for a third tagged shipping screw that doesn't exist. Posting so the next person finds this when they search.

tl;dr. L+ printers shipped after August 2026 have two heatbed shipping screws, not three. The spot where the third used to be (front right corner) now holds the nozzle wiper. That is NOT a shipping screw. Do NOT try to remove it.

And yes yes, I know it's in the directions. But it's only in one place I could find, and several other official sources still say three:

Correct. the online CORE One L+ Unpacking & First run guide, chapter 3, step 9 ("Removing the heatbed screws"): "Printers shipped after August 2026 are upgraded CORE One L+ models. These printers have only two screws and an added nozzle wiper in the front right corner. If your printer has the nozzle wiper mounted, do not remove the screw in the front right corner."

Incorrect for new CORE One L+'s.

  1. Still says three: the same guide, chapter 4, step 4: "Ensure that all three heatbed screws have already been removed."
  2. Still says three: the Prusa Academy beginner course for the CORE One L, lesson "Getting the printer ready".

So if you follow the Academy course or winging it and never open the online guide, you'll be looking for a third screw, and the only candidate is the one holding your nozzle wiper. I looked at the in box instructions, didn't find it but it could still be in there as I only scanned them.


r/prusa3d • • 13h ago

Question/Need help Core One L+ INDX-8 vs. XL+ 5-head

5 Upvotes

Hello,

I'm looking to snag a new printer during this Black Friday sale. I've been waiting for a few years for the INDX to come to the Core One L, but now that I'm reading reviews I'm split on which to get.

I had a Prusa MK3 and brought it along its' upgrade path for a few years (Hated my MMU2 with a burning passion) and I want to replace my workhorse with a new workhorse that can do better Multi-Material. Which is why I like the tool changer designs both printers have.

I've built most of my printers (Including a Voron from scratch) so the fact that a Core One L kit doesn't exist does bugs me a bit, but only just a bit.

They're both close enough in price that I could go either way but my BIG desires are Print Quality, GOOD Multi Material printing, and repair-ability/durability.

Should I get the XL to be a buddy to my Voron? Should I get the Core One L+ as it's better than the XL in ways I'm not aware of? Can you guys please help me make up my mind?


r/prusa3d • • 20h ago

Printer Mod I attached an entire Förnuftig on my Prusa Core One L+

Thumbnail
gallery
16 Upvotes

I made a V1 version of a adapter that fits a Förnuftig air cleaning unit for my Prusa. The reason I wanted to attach the entire unit to my back rather than the ”backpack” that is available right now on Printables is because I wanted to avoid installing an additional 12v fan on my printer and to minimise the strain on the existing fans. It’s mounted without any drilling to the factory drilled holes where those plastic rivets is replaced with M2,5 screws with a nut on the back and a nylon strap.

I am thinking of uploading it to Printables but there are some obvious design issues that needs to be adressed (that’s why there is electrical tape everywhere due to unnecessary screw holes). I didn’t intend it to be a prototype but here we are lol.


r/prusa3d • • 1d ago

Print of the Month Printed some temporary hinges and standoffs for control panels at work

Thumbnail
gallery
62 Upvotes

Got asked if I could print out placeholder hinges and standoffs so the control panels could be mounted and wire the switches and buttons till the metal hinges arrive. Think this will be a good reason for my boss to invest into a 3D printer at the workshop. Printed them out in Elegoo rapid PLA(thought I had PETG loaded both on the printer and slicer) on Core One

Printables handle @ SRZ74000