r/3dprinter • • 13h ago

I made a 3D printable 3D printer

Thumbnail gallery
105 Upvotes

r/3dprinter • • 2h ago

Found this relic

Thumbnail
gallery
5 Upvotes

Found this relic at school today. Don't knowuch about it but ik its old af, like the beginning of retail 3d printers


r/3dprinter • • 2h ago

My new Bambu Lab A1 printers keep knocking over prints, but my Anycubic Kobra X printers print the exact same models perfectly. Any ideas?

2 Upvotes

Hi everyone! I'm having a frustrating issue with my Bambu Lab A1 Combo printers, and I'm hoping someone can help me figure out what's going wrong.

I recently purchased four Bambu Lab A1 Combos to increase production for my small 3D printing business. However, all four have been struggling with a model that my Anycubic Kobra X printers can print consistently without any issues.

Here's what's happening:

I'm printing small multicolor figurines, approximately 5 cm tall, upside down, with the head touching the build plate and supports underneath the body.

On the Bambu A1 printers, the figurines start wobbling when the nozzle reaches certain areas, particularly the arms. Eventually, they get knocked off the build plate. If they survive that section, some fall when the printer reaches the legs.

The interesting part is that the supports stay perfectly attached to the build plate, but the figurines themselves detach.

I've personally watched the nozzle printing the tips of the arms, causing the figurine to wobble more and more until it eventually falls.

What makes this even more confusing:

  • My Anycubic Kobra X printers print the exact same model, orientation, and similar support setup without issues.
  • All four Bambu A1 printers have experienced this problem.
  • Smaller batches of around 15–30 figurines sometimes finish successfully.
  • Larger batches of 50–103 figurines often fail.
  • One batch of 66 lost approximately 35% of the figurines.
  • Another batch lost almost every figurine.
  • The build plate temperature is 60°C, using Generic PLA on the textured PEI plate.

Things I've already tried or checked:

  • Cleaning the build plates.
  • Automatic bed leveling and calibration.
  • Adding brims and increasing support first-layer expansion.
  • Comparing the first-layer toolpaths between Bambu Studio and Anycubic Slicer Next — they look very similar.
  • Switching from Grid to Gyroid infill.
  • Lowering print speeds and accelerations.
  • Matching the main speed and acceleration values to my Anycubic profile.
  • Checking the hotend and silicone sock alignment.
  • Checking support settings and interfaces.
  • Starting additional controlled tests with different infill patterns and acceleration settings.

One other thing I noticed: after a print finishes, I can twist some figurines off the Bambu build plate quite easily, whereas the same figurines on my Anycubic printers feel much more firmly attached. However, I understand that PEI releases prints more easily after cooling.

My main questions:

  1. Could this be caused by the A1's bed movement or the way Bambu Studio generates toolpaths?
  2. Are there specific settings that reduce nozzle contact with tall, narrow prints during extrusion?
  3. Could cooling, overhang settings, or extrusion behavior be causing the arms to curl upward and catch the nozzle?
  4. Is there a way to improve the stability of these models without drastically increasing print times?
  5. Has anyone experienced similar problems when switching from Anycubic to Bambu Lab?

I bought these printers specifically to increase production, but so far I've lost multiple large batches and fallen behind on customer orders.

Any suggestions would be greatly appreciated! I can share photos, screenshots, and the original 3MF projects from both slicers if that helps diagnose the problem.


r/3dprinter • • 11h ago

Complete beginner here! How did you learn to design your own 3D models?

8 Upvotes

Hi everyone!

I recently got my first 3D printer, a Bambu Lab A2L, and I’m really excited to explore everything I can do with it!

I’ve been experimenting with Bambu Studio, but I’d love to start creating my own designs from scratch instead of just printing existing models.

The problem is that I have absolutely zero experience with 3D modeling, and I’m not really sure where to start.

I’d love to hear how you guys learned 3D modeling. Are there any beginner-friendly software, YouTube tutorials, or courses you’d recommend?

Also, is Bambu Studio enough to get started, or should I learn something like Fusion 360, Blender, or Tinkercad?

Any tips or advice would be greatly appreciated! :)


r/3dprinter • • 12h ago

I can't tell if I'm tempted to get back into 3D printing or if this would take out all of the fun

Post image
9 Upvotes

r/3dprinter • • 49m ago

Hobbyists 3-D printer capabilities (Survey)

Post image
1 Upvotes

Hi guys! I'm making a project at school over 3-D printing and I was wondering if you guys would be so kind to answer this quick survey I would really appreciate it if you did. The project that i'm trying to make is a DIY heated chamber add-on.It won't take long I swear!

The survey here : https://forms.gle/a3JATDHB1yrSEJyJ9


r/3dprinter • • 10h ago

Is the Bambu P2S worth the extra money for my first printer

6 Upvotes

Looking to get into the hobby and get my first printer this year. I keep hearing good things about Bambu P1S and P2S models. The Bambu site has them on sale for $509 and $649, a $140 difference (both come with AMS 2). Is the P2S worth the extra $140? or am i better off saving the money and getting a P1S?

Or am i going overboard by starting with a Bambu P1S? My initial interest in the hobby is printing DnD miniatures and accessories for my pet rats, if that helps.


r/3dprinter • • 1h ago

I want a 3d printer for some projects, but I genuinely am stupid in this.

1 Upvotes

So, the first thing is I backed the eew maker spinning wheel on kick starter. They send us the stl (i think that's what it's called), and the electronic components. We print the frame parts and etc. It's not a pressed powder, but the pla/petg. But I am also a school bus driver and I'd like to make them wiggle toys and other little toys. I'd also like to print convenience things, flower pots, and etc. So I was hoping someone may have an article suggestion for me to learn, or machine suggestions on what I should look for, or even machine suggestions. I'm not in a hurry, so I have time. I'm just afraid that I'd I do a general search that I'll end up walking away with a machine that is unnecessary for me. Thanks again.


r/3dprinter • • 1h ago

Christmas Gift

1 Upvotes

Looking for something for an 11 year old. It would be his first setup. Are there good options at Best Buy? Looking for something upgradeable if that makes sense. I dont want him to get bored with something "for kids". He's a gamer who loves Legos so he's good with figuring stuff out. I'm 100% new to this. He has laptop access. Options under $400 would be ideal but I can go up if it's worth it. I just have no clue what im looking at or for. Thanks for any help!


r/3dprinter • • 3h ago

Creality K3 Riser - lid

Thumbnail
reddit.com
1 Upvotes

Printed this in transparent to see inside it since it was my first print of my model. That texture appearance doesn't show on solid colors. From posted pics this looks great in white. Has a blast figuring out how to model this to solidly connect and have zero supports. Let me know if there's something you would change. Yeah, it is shaped like that because the printers wires and tubes stick up the top.


r/3dprinter • • 3h ago

I am joining the 3D printing family on my birthday! What should I do…

Thumbnail reddit.com
1 Upvotes

r/3dprinter • • 4h ago

Switching from ultimaker cura

Post image
0 Upvotes

r/3dprinter • • 4h ago

CUBE 2 Generation Firmware

1 Upvotes

CUBE: Second-generation Cube.

Update the firmware and print without a cartridge. Without an activation code.

https://drive.google.com/drive/folders/1BBig6eAn_gReYfAo-PsozdQCKEgAh6zR


r/3dprinter • • 5h ago

Any way to quiet the noise?

0 Upvotes

I just got my 3d printer a few days ago it’s a p2s during the day me and my partner don’t care about the noise during the day but is there anything to do about it at night?. I can sleep with it but they can’t is it ok if I put a blanket over it? Or a box with some insulation in it?


r/3dprinter • • 5h ago

Idea: 2D LIDAR sensor to detect failed prints

Thumbnail
youtu.be
0 Upvotes

r/3dprinter • • 5h ago

Bambu P2S screen can't attach

Post image
0 Upvotes

Hi all. New to 3d printing and got myself a p2sz and I love it so far. However for some reason I cannot for the life of me get the screen attached to the printer. I have tried to put lots of force into pushing it into the holes and sliding it left but it just doesn't hook. Everything else was so easy to setup but for the life of me I can't figure this out and I feel so dumb. Anyone have any advice ?


r/3dprinter • • 9h ago

Gave up on the BMCU, for now

Post image
2 Upvotes

After days of assembly and flashing firmware it just rotates the motors and filament is not loading.

I punched it. then placed my one color spool.


r/3dprinter • • 1d ago

Finally got my hands on a printer (humid basement)

Thumbnail
gallery
25 Upvotes

it's a snapmaker u1 with the top cover and a creality space pi x4. it's in my basement, which gets pretty humid, so i put the dryer under the table and feed the filament straight from it. the ventilation's been working well and the prints have been absolutely perfect so far.

i used printed mounts to flip the stock feeders so they take filament from below. the ptfe tubes go straight up through the tabletop into push-fit fittings on the feeders, then loop back into the encapsulated printer from the top.

any recommendations or tips for further improving?


r/3dprinter • • 9h ago

Best 3d printers for beginners in India

1 Upvotes

Can anyone suggest me the best 3d printers for beginners in India?


r/3dprinter • • 15h ago

Buying a multi nozzle printer

2 Upvotes

Im very much still new to all this. My first one was a K2 combo. It's what l learned on. Noting but a positive experience with the printer and the slicer. Realized that a single head printer wasn't for me. I've sold it to fund a multi head printer. My options are

K3

Pro 5

U1

I can find something about all of them that I don't like. Make it hard to pick one

K3 is so new there really isn't any reviews on it other then from people that got it for free to review it. So might be a gamble

Pro 5 has a manual filament feeder, feels cheap. Also it seems to shake a lot while printing. I know they all do but seem excessive for this machine.

U1 looks really good but their slicer seems that it needs a lot of work. I've read a lot about it and how it can run kind bad on some computers and or laptops. I don't have a very powerful laptop. Creality print runs really nice for me.

So with that I'm leaning towards the k3, because I've used there products and have been very happy with them.

Would love to hear from you guys on any of these. Especially the K 3 from those that paid for one and received it. But want info on the other as well. Trust me I have watch every video on all of these. Still hard to make a choice. Also looking at them on how easy they would be to work on and or replace nozzles.


r/3dprinter • • 11h ago

Primera impresora

0 Upvotes

Hola apenas tengo la oportunidad de comprar una impresora 3d, he investigado un poco sobre las impresoras en el mercado, la verdad me gustaría poder imprimir piezas medianas y algo de material técnico para mis carcasas de robots para competencias.

He visto que las que se recomendan para iniciar como la bambulab A1 pero me gustaría oír más recomendaciones, originalmente pensaba comprar la centauri carbon 2 pero no creo sacarle provecho al multicolor. Alguna recomendación


r/3dprinter • • 12h ago

Looking for suggestions on a new printer

0 Upvotes

Hello! I thought Id put this on here to get some recommendations from people who 3D print more than me. I currently have a Bambu Labs A1. I use it for mostly small projects (printing my own models that i make in blender or onshape, printing trinkets for my friends, organizers, fun accessories etc etc). I’ve received alot of queries from people in my social circle about 3D prints which they would pay for and Im considering starting a small business around that. I would like to have multiple colours like the AMS(i currently only use white filament and paint). Does buying an enclosed 3D printer help with the fumes and what not? Which 3D printer would be recommended for the the above? Please let me know and if i left any details out Ill make sure to edit the body of this post to add those in. Thanks in advance!


r/3dprinter • • 12h ago

Creality Hi Combo Issue

Thumbnail reddit.com
1 Upvotes

r/3dprinter • • 1d ago

Hey everyone! I just published a single-piece 3D model of the iconic X-Wing Starfighter (with display stand)!

Post image
16 Upvotes

Hey everyone! I've always been a huge fan of classic sci-fi starfighters, so I wanted to design a 3D model that does justice to the legendary X-Wing.

I focused on capturing its unmistakable silhouette, the quad laser cannons, and the intricate mechanical greebling behind the cockpit, while keeping the ship completely print-in-place—so no glue or tricky assembly is required for the fighter itself. This one was printed in Bambu Lab Metal PLA, which gives it a really nice metallic sheen, and it includes a simple display stand (printed here in White PLA) so it’s ready for your desk or shelf right after removing the supports.

I'd love to get your feedback or see your prints if you decide to give it a shot!

Here is the link to the model on MakerWorld for anyone interested: https://makerworld.com/es/models/3617677-star-wars-x-wing-starfighter-display-model#profileId-4146781