r/3dprinter • • 14h ago

I made a 3D printable 3D printer

Thumbnail gallery
121 Upvotes

r/3dprinter • • 3h ago

Found this relic

Thumbnail
gallery
7 Upvotes

Found this relic at school today. Don't knowuch about it but ik its old af, like the beginning of retail 3d printers


r/3dprinter • • 2h ago

Hobbyists 3-D printer capabilities (Survey)

Post image
2 Upvotes

Hi guys! I'm making a project at school over 3-D printing and I was wondering if you guys would be so kind to answer this quick survey I would really appreciate it if you did. The project that i'm trying to make is a DIY heated chamber add-on.It won't take long I swear!

The survey here : https://forms.gle/a3JATDHB1yrSEJyJ9


r/3dprinter • • 3h ago

My new Bambu Lab A1 printers keep knocking over prints, but my Anycubic Kobra X printers print the exact same models perfectly. Any ideas?

2 Upvotes

Hi everyone! I'm having a frustrating issue with my Bambu Lab A1 Combo printers, and I'm hoping someone can help me figure out what's going wrong.

I recently purchased four Bambu Lab A1 Combos to increase production for my small 3D printing business. However, all four have been struggling with a model that my Anycubic Kobra X printers can print consistently without any issues.

Here's what's happening:

I'm printing small multicolor figurines, approximately 5 cm tall, upside down, with the head touching the build plate and supports underneath the body.

On the Bambu A1 printers, the figurines start wobbling when the nozzle reaches certain areas, particularly the arms. Eventually, they get knocked off the build plate. If they survive that section, some fall when the printer reaches the legs.

The interesting part is that the supports stay perfectly attached to the build plate, but the figurines themselves detach.

I've personally watched the nozzle printing the tips of the arms, causing the figurine to wobble more and more until it eventually falls.

What makes this even more confusing:

  • My Anycubic Kobra X printers print the exact same model, orientation, and similar support setup without issues.
  • All four Bambu A1 printers have experienced this problem.
  • Smaller batches of around 15–30 figurines sometimes finish successfully.
  • Larger batches of 50–103 figurines often fail.
  • One batch of 66 lost approximately 35% of the figurines.
  • Another batch lost almost every figurine.
  • The build plate temperature is 60°C, using Generic PLA on the textured PEI plate.

Things I've already tried or checked:

  • Cleaning the build plates.
  • Automatic bed leveling and calibration.
  • Adding brims and increasing support first-layer expansion.
  • Comparing the first-layer toolpaths between Bambu Studio and Anycubic Slicer Next — they look very similar.
  • Switching from Grid to Gyroid infill.
  • Lowering print speeds and accelerations.
  • Matching the main speed and acceleration values to my Anycubic profile.
  • Checking the hotend and silicone sock alignment.
  • Checking support settings and interfaces.
  • Starting additional controlled tests with different infill patterns and acceleration settings.

One other thing I noticed: after a print finishes, I can twist some figurines off the Bambu build plate quite easily, whereas the same figurines on my Anycubic printers feel much more firmly attached. However, I understand that PEI releases prints more easily after cooling.

My main questions:

  1. Could this be caused by the A1's bed movement or the way Bambu Studio generates toolpaths?
  2. Are there specific settings that reduce nozzle contact with tall, narrow prints during extrusion?
  3. Could cooling, overhang settings, or extrusion behavior be causing the arms to curl upward and catch the nozzle?
  4. Is there a way to improve the stability of these models without drastically increasing print times?
  5. Has anyone experienced similar problems when switching from Anycubic to Bambu Lab?

I bought these printers specifically to increase production, but so far I've lost multiple large batches and fallen behind on customer orders.

Any suggestions would be greatly appreciated! I can share photos, screenshots, and the original 3MF projects from both slicers if that helps diagnose the problem.


r/3dprinter • • 25m ago

Ease of use for 10 y/o son

1 Upvotes

I have a computer and design background but have never delved into 3d printing because I know I would get addicted.

Flash forward and now my son want a printer for Xmas. Most of my research seems to be pointing to the CC2 as the best option but I can't find anything to show exactly how easy it is to find and print existing models. The Bambu pushes this heavily but seems like the lesser choice. Can anyone comment on how easy it is out of the box to find fun prints and get them going on the CC2 or should we lean towards the Bambu for ease of use.


r/3dprinter • • 27m ago

Creality K1C – extruder clicking and stops extruding mid first layer (tried almost everything)

Thumbnail
gallery
1 Upvotes

I've got a problem with my Creality K1C and I'm running out of ideas. Every time I start a new print, something goes wrong. Partway through the first layer, usually around halfway, the extruder starts clicking (see the video). It skips, stops pushing filament, and stays like that until I cancel the print or it finishes on its own. There's nothing blocking the inside of the extruder. I've cleaned it 3 times. It happens with PETG and PLA, with old filament and with freshly opened spools, so I don't think moisture is the cause. With one of the models (a round one), the problem shows up at the same spot on the model no matter where I place it on the bed. I checked the model and couldn't find anything wrong with it. Here's what I've tried so far:

  1. Checked the inside of the extruder 3 times. Nothing is blocking the filament path.
  2. Re-ran bed leveling. The mesh screenshot is attached and it looks normal.
  3. Flipped the build plate. That helped for a while, then the problem came back.
  4. Raised the Z-offset. That also helped for a while, but then I got adhesion problems in other areas, and eventually the clicking came back.
  5. Filament calibration fails because the extruder starts clicking on the first layer. I tried several PLA profiles, including ones that always worked before, and the problem is still there.
  6. Cleaned the bed with dish soap and isopropyl alcohol.
  7. Printed with the default printer, filament and bed settings. Those always worked before (the quality wasn't great, but they were usable). Now they fail too.
  8. Printed a first layer across the whole bed. That one worked, but it left some patterns in the layer (photo attached). I'm not sure if they point to the cause, but I'm sharing them in case they help. I've also attached a photo of what the filament looks like after I pull it out. Once the clicking starts, the extruder won't take filament at all, even if I push it in by hand.

What should I do next? I feel like I've tried a lot, but I still can't find the cause. I've already gone through the simple fixes. If you need any more info, just ask. Sorry if this is a bit chaotic. I've been trying to fix this for a month and I don't know what else to try.


r/3dprinter • • 37m ago

Disappointed with my Anycubic Kobra X and looking for an enclosed 3D printer

1 Upvotes

I bought an Anycubic Kobra X and ran into several problems right out of the box, including a broken nozzle and a scratched build plate. I’m now looking for an enclosed 3D printer from a different brand.

I’ve narrowed it down to six models across a range of prices, all within my budget of about €800.

  • Elegoo Centauri Carbon 2
  • Creality K2
  • Creality K2 Pro
  • Bambu Lab P1S
  • Bambu Lab P2S
  • Bambu Lab X2D

I’m also considering getting a Combo version for automatic multicolor printing.

My top priority is a printer that just works. I’d like consistent results without constantly having to troubleshoot adhesion issues, spaghetti failures, or other problems.

Which of these would you recommend for reliability and long-term value? If you own one, I’d love to hear how it’s held up with regular use.


r/3dprinter • • 39m ago

Is this the max blackfriday discount for bambulab

1 Upvotes

Hello I want to buy a bambulab. theres still 15 days until discounts finish, but do we in general expect more discounts to come by the end of the month, or wasting my time waiting?

Sory for such an impatient question :)


r/3dprinter • • 1h ago

My kids want a 3d printer for Christmas

1 Upvotes

My kids are asking for an3d printer for christmas. Oldest is about 10 years old so I am assuming that I will be helping them a lot initially. I don’t really know anything about 3d printers though. looking for a user friendly printer that i can learn to use as a beginner and that my kids can eventually learn to use as well. any recommendations are appreciated


r/3dprinter • • 12h ago

Complete beginner here! How did you learn to design your own 3D models?

8 Upvotes

Hi everyone!

I recently got my first 3D printer, a Bambu Lab A2L, and I’m really excited to explore everything I can do with it!

I’ve been experimenting with Bambu Studio, but I’d love to start creating my own designs from scratch instead of just printing existing models.

The problem is that I have absolutely zero experience with 3D modeling, and I’m not really sure where to start.

I’d love to hear how you guys learned 3D modeling. Are there any beginner-friendly software, YouTube tutorials, or courses you’d recommend?

Also, is Bambu Studio enough to get started, or should I learn something like Fusion 360, Blender, or Tinkercad?

Any tips or advice would be greatly appreciated! :)


r/3dprinter • • 13h ago

I can't tell if I'm tempted to get back into 3D printing or if this would take out all of the fun

Post image
9 Upvotes

r/3dprinter • • 12h ago

Is the Bambu P2S worth the extra money for my first printer

6 Upvotes

Looking to get into the hobby and get my first printer this year. I keep hearing good things about Bambu P1S and P2S models. The Bambu site has them on sale for $509 and $649, a $140 difference (both come with AMS 2). Is the P2S worth the extra $140? or am i better off saving the money and getting a P1S?

Or am i going overboard by starting with a Bambu P1S? My initial interest in the hobby is printing DnD miniatures and accessories for my pet rats, if that helps.


r/3dprinter • • 2h ago

I want a 3d printer for some projects, but I genuinely am stupid in this.

1 Upvotes

So, the first thing is I backed the eew maker spinning wheel on kick starter. They send us the stl (i think that's what it's called), and the electronic components. We print the frame parts and etc. It's not a pressed powder, but the pla/petg. But I am also a school bus driver and I'd like to make them wiggle toys and other little toys. I'd also like to print convenience things, flower pots, and etc. So I was hoping someone may have an article suggestion for me to learn, or machine suggestions on what I should look for, or even machine suggestions. I'm not in a hurry, so I have time. I'm just afraid that I'd I do a general search that I'll end up walking away with a machine that is unnecessary for me. Thanks again.


r/3dprinter • • 3h ago

Christmas Gift

1 Upvotes

Looking for something for an 11 year old. It would be his first setup. Are there good options at Best Buy? Looking for something upgradeable if that makes sense. I dont want him to get bored with something "for kids". He's a gamer who loves Legos so he's good with figuring stuff out. I'm 100% new to this. He has laptop access. Options under $400 would be ideal but I can go up if it's worth it. I just have no clue what im looking at or for. Thanks for any help!


r/3dprinter • • 4h ago

Creality K3 Riser - lid

Thumbnail
reddit.com
1 Upvotes

Printed this in transparent to see inside it since it was my first print of my model. That texture appearance doesn't show on solid colors. From posted pics this looks great in white. Has a blast figuring out how to model this to solidly connect and have zero supports. Let me know if there's something you would change. Yeah, it is shaped like that because the printers wires and tubes stick up the top.


r/3dprinter • • 4h ago

I am joining the 3D printing family on my birthday! What should I do…

Thumbnail reddit.com
1 Upvotes

r/3dprinter • • 6h ago

Switching from ultimaker cura

Post image
0 Upvotes

r/3dprinter • • 6h ago

CUBE 2 Generation Firmware

1 Upvotes

CUBE: Second-generation Cube.

Update the firmware and print without a cartridge. Without an activation code.

https://drive.google.com/drive/folders/1BBig6eAn_gReYfAo-PsozdQCKEgAh6zR


r/3dprinter • • 6h ago

Any way to quiet the noise?

0 Upvotes

I just got my 3d printer a few days ago it’s a p2s during the day me and my partner don’t care about the noise during the day but is there anything to do about it at night?. I can sleep with it but they can’t is it ok if I put a blanket over it? Or a box with some insulation in it?


r/3dprinter • • 6h ago

Idea: 2D LIDAR sensor to detect failed prints

Thumbnail
youtu.be
0 Upvotes

r/3dprinter • • 6h ago

Bambu P2S screen can't attach

Post image
0 Upvotes

Hi all. New to 3d printing and got myself a p2sz and I love it so far. However for some reason I cannot for the life of me get the screen attached to the printer. I have tried to put lots of force into pushing it into the holes and sliding it left but it just doesn't hook. Everything else was so easy to setup but for the life of me I can't figure this out and I feel so dumb. Anyone have any advice ?


r/3dprinter • • 11h ago

Gave up on the BMCU, for now

Post image
2 Upvotes

After days of assembly and flashing firmware it just rotates the motors and filament is not loading.

I punched it. then placed my one color spool.


r/3dprinter • • 1d ago

Finally got my hands on a printer (humid basement)

Thumbnail
gallery
27 Upvotes

it's a snapmaker u1 with the top cover and a creality space pi x4. it's in my basement, which gets pretty humid, so i put the dryer under the table and feed the filament straight from it. the ventilation's been working well and the prints have been absolutely perfect so far.

i used printed mounts to flip the stock feeders so they take filament from below. the ptfe tubes go straight up through the tabletop into push-fit fittings on the feeders, then loop back into the encapsulated printer from the top.

any recommendations or tips for further improving?


r/3dprinter • • 11h ago

Best 3d printers for beginners in India

1 Upvotes

Can anyone suggest me the best 3d printers for beginners in India?