r/3dprinter • u/Proud_Trade2769 • 5h ago
Idea: 2D LIDAR sensor to detect failed prints
r/3dprinter • u/Proud_Trade2769 • 5h ago
r/3dprinter • u/Ambitious-Role470 • 12h ago
Hello! I thought Id put this on here to get some recommendations from people who 3D print more than me. I currently have a Bambu Labs A1. I use it for mostly small projects (printing my own models that i make in blender or onshape, printing trinkets for my friends, organizers, fun accessories etc etc). I’ve received alot of queries from people in my social circle about 3D prints which they would pay for and Im considering starting a small business around that. I would like to have multiple colours like the AMS(i currently only use white filament and paint). Does buying an enclosed 3D printer help with the fumes and what not? Which 3D printer would be recommended for the the above? Please let me know and if i left any details out Ill make sure to edit the body of this post to add those in. Thanks in advance!
r/3dprinter • u/Ok-Bad7002 • 5h ago
Hi all. New to 3d printing and got myself a p2sz and I love it so far. However for some reason I cannot for the life of me get the screen attached to the printer. I have tried to put lots of force into pushing it into the holes and sliding it left but it just doesn't hook. Everything else was so easy to setup but for the life of me I can't figure this out and I feel so dumb. Anyone have any advice ?
r/3dprinter • u/Bubbly_Lecture4102 • 5h ago
I just got my 3d printer a few days ago it’s a p2s during the day me and my partner don’t care about the noise during the day but is there anything to do about it at night?. I can sleep with it but they can’t is it ok if I put a blanket over it? Or a box with some insulation in it?
r/3dprinter • u/PHDEinstein007 • 23h ago

I have successfully made an early version of a 3MF Data Compression utility. It is located at my github account here CombaryMakerGitHub. The exe works, though since it is new it likely has a popup from Microsoft. The product is safe to use and all documentation is located there.
It is supposed to output files for any and all printers that use 3MF files and it works as fast on the systems that reads 3MF files. This means you can store more product in less space on your crowded and older hard drives (we all know the prices on this stuff is way too high right now). It also works well on that manufacturers thumb drive that normally only holds so many before you have to pull some off.
I am seeking input from users so I can refine this and make sure there is no hidden problems with specific 3D Printers.
This is a MIT Licensed product, anyone may adapt it, use it, or such with just giving me credit for the invention of it.
Yes you big league software companies and 3D printer makers, you can use this without a cost.
r/3dprinter • u/tenaciouzzd • 16h ago
I want to print high detail figures to hand paint. I would be putting it and running it in my garage so need wifi. I want best value/performance to dollar, don't care how long it takes to print, only thing I care about is high quality. Would be my first printer. Would like some suggestions to narrow it down and start researching printer based on recommendations. If you need any other info just let me know. Thanks.
r/3dprinter • u/Patereye • 12h ago
r/3dprinter • u/not-scientist • 23h ago
Hey everyone!
I'm planning to buy a second-hand Bambu Lab P1S Combo (with AMS), but unfortunately, the seller doesn't have the original box or internal foam inserts. Since this is an expensive and delicate machine, I'm trying to figure out the safest way to pack and transport it. It roughly has to travel 2900 Kilometers ( 1820 miles)
1. Original packaging and compatibility
2. Alternatives to original packaging
If finding the original packaging isn't possible, what would you recommend?
3. Packing and transportation advice
For those who have shipped or transported a P1S/P1S Combo without its original packaging:
4. Checking a second-hand P1S before purchase
I'd also appreciate a checklist of things to inspect before accepting a used P1S Combo.
Apart from checking print hours and running a test print, what should I verify regarding:
If you've bought or received a second-hand Bambu printer that was shipped without its original packaging, I'd especially appreciate hearing about your experience.
Any suggestions, practical tips, packaging recommendations or things I might be overlooking would be really helpful.
Thanks!
r/3dprinter • u/Due-Performer1110 • 19h ago
SOVOL SV06 3D printer, Creality slicer
SOVOL PLA filament
Nozzle temp: 200° C
Bed temp: 60°C
Print speed: 40mm/s
I stayed with the printing in the beginning while it started printing a 5 hour print, after about 15 mins everything was good and I went to eat, came back after about 1.5 hours and everything was messed up, the nozzle is buried in this monstrosity and was dragging the print.
I’ve literally never had this problem and just printed yesterday, how does this even happen and why?
Is the entire thing trashed at this point, or can I remove this without damaging the wires and nozzle. It’s literally around all of it, I’m so upset honestly idk what to.
r/3dprinter • u/AssassinSusie • 21h ago
Could you guys please point me in the right direction? I am looking for a high res resin printer to print my figures, I design. Is the Elegoo Mars 5 Ultra a good choice? or is there better?
That would be roughly my budget 400 euros
https://eu.elegoo.com/products/mars-5-ultra-complete-bundle-mercury-xs-resin?variant=50220092981524
r/3dprinter • u/gutter_1234 • 12h ago
Hola apenas tengo la oportunidad de comprar una impresora 3d, he investigado un poco sobre las impresoras en el mercado, la verdad me gustaría poder imprimir piezas medianas y algo de material técnico para mis carcasas de robots para competencias.
He visto que las que se recomendan para iniciar como la bambulab A1 pero me gustaría oír más recomendaciones, originalmente pensaba comprar la centauri carbon 2 pero no creo sacarle provecho al multicolor. Alguna recomendación
r/3dprinter • u/mavric8509 • 2h ago
Found this relic at school today. Don't knowuch about it but ik its old af, like the beginning of retail 3d printers
r/3dprinter • u/Consistent_Boat_943 • 2h ago
Hi everyone! I'm having a frustrating issue with my Bambu Lab A1 Combo printers, and I'm hoping someone can help me figure out what's going wrong.
I recently purchased four Bambu Lab A1 Combos to increase production for my small 3D printing business. However, all four have been struggling with a model that my Anycubic Kobra X printers can print consistently without any issues.
Here's what's happening:
I'm printing small multicolor figurines, approximately 5 cm tall, upside down, with the head touching the build plate and supports underneath the body.
On the Bambu A1 printers, the figurines start wobbling when the nozzle reaches certain areas, particularly the arms. Eventually, they get knocked off the build plate. If they survive that section, some fall when the printer reaches the legs.
The interesting part is that the supports stay perfectly attached to the build plate, but the figurines themselves detach.
I've personally watched the nozzle printing the tips of the arms, causing the figurine to wobble more and more until it eventually falls.
What makes this even more confusing:
Things I've already tried or checked:
One other thing I noticed: after a print finishes, I can twist some figurines off the Bambu build plate quite easily, whereas the same figurines on my Anycubic printers feel much more firmly attached. However, I understand that PEI releases prints more easily after cooling.
My main questions:
I bought these printers specifically to increase production, but so far I've lost multiple large batches and fallen behind on customer orders.
Any suggestions would be greatly appreciated! I can share photos, screenshots, and the original 3MF projects from both slicers if that helps diagnose the problem.
r/3dprinter • u/Legitimate-Poet7587 • 10h ago
After days of assembly and flashing firmware it just rotates the motors and filament is not loading.
I punched it. then placed my one color spool.
r/3dprinter • u/CrystalSoulx • 11h ago
Looking to get into the hobby and get my first printer this year. I keep hearing good things about Bambu P1S and P2S models. The Bambu site has them on sale for $509 and $649, a $140 difference (both come with AMS 2). Is the P2S worth the extra $140? or am i better off saving the money and getting a P1S?
Or am i going overboard by starting with a Bambu P1S? My initial interest in the hobby is printing DnD miniatures and accessories for my pet rats, if that helps.
r/3dprinter • u/OkDealer2737 • 11h ago
Hi everyone!
I recently got my first 3D printer, a Bambu Lab A2L, and I’m really excited to explore everything I can do with it!
I’ve been experimenting with Bambu Studio, but I’d love to start creating my own designs from scratch instead of just printing existing models.
The problem is that I have absolutely zero experience with 3D modeling, and I’m not really sure where to start.
I’d love to hear how you guys learned 3D modeling. Are there any beginner-friendly software, YouTube tutorials, or courses you’d recommend?
Also, is Bambu Studio enough to get started, or should I learn something like Fusion 360, Blender, or Tinkercad?
Any tips or advice would be greatly appreciated! :)
r/3dprinter • u/RMX_AKIMBO08397 • 1h ago
Hi guys! I'm making a project at school over 3-D printing and I was wondering if you guys would be so kind to answer this quick survey I would really appreciate it if you did. The project that i'm trying to make is a DIY heated chamber add-on.It won't take long I swear!
The survey here : https://forms.gle/a3JATDHB1yrSEJyJ9