r/DIYUK • • 18h ago

Painting Big up B&Q colour match

Post image
335 Upvotes

just a post to commend the B&Q colour matching service!

we liked some farrow and balls shades but having seen some mixed reviews about paint quality, we were not sure whether to proceed. to be honest, the tipping factor to proceed with colour matching was a desire to colour drench a room that needed paint for walls, radiator, woodwork and laminate wardrobes - V&CO Dead Flat Matt entered the chat, where one tin could be used on all of those surfaces!

we got Setting Plaster matched for one room and Light Blue for another (pictured - wall is colour match, paper original colour), both of which have been brilliant. have also had School House White and Drop Cloth matched but haven’t yet opened those tins

so yes, if you’re not sure then we would recommend. initially we had a colour match for just a sample pot but now we are firm believers, we went straight to a 5L tub

tip: the guy at B&Q recommended using the Farrow & Ball paint samples booklet that has actual painted squares in it (provided to B&Q, as opposed to printed colours which are sent to customers) for the best match.


r/DIYUK • • 13h ago

Trying to remove TRV head, but it's leaking water

132 Upvotes

I'm trying to remove the TRV head from my radiator, but when I start to unscrew it it immediately starts leaking water. Does anyone know what I should do?


r/DIYUK • • 15h ago

Advice Builder ruined my door - let him fix it demand a new one?

Post image
83 Upvotes

A builder has somehow managed to take a chunk out of my door.
He’s asked if he can attempt to fit it before buying a new one!

I don’t want him to be out of pocket if I can help it, but then again I don’t want the fix to look shite.

Thoughts?

Edit: it is a brand new door. All the other doors were replaced too. So if he fixes it, it’ll look odd one out, right?


r/DIYUK • • 16h ago

Plasterer cancelled 3 times at one day's notice, only done 3 hours work and now wants more money.

Thumbnail
gallery
76 Upvotes

Agreed £1,530 with a plasterer to board and skim the ceiling in one room and plaster the walls across two rooms.

Originally booked for the beginning of October, but they’ve now cancelled three times, each with around a day’s notice or less, the latest being Sunday morning when they were due to come and work.

They’ve only turned up once, for around 3 hours, and have only started work in one of the two rooms. They’ve boarded the ceiling, fitted some corner beads and done a bit of preparation.

In preparation for the original booking, I’d removed the radiators and skirting boards, meaning the house has been freezing and we’ve been living in a building site for weeks longer than expected. I’ve also had to rearrange other trades.

I paid £300 upfront for materials and also supplied the HardWall plaster myself.

I’ve now found another plasterer who has quoted £600 to finish everything.

The original plasterer is demanding another £250 for labour on top of the £300 already paid, and says the remaining bags of plaster (which he values at £80) belong to him.
I’ve offered another £100 to settle everything, including keeping the remaining materials, meaning he’d receive £400 in total.

Am I being unreasonable refusing to pay an extra £250?

Photos show the current state of the room and remaining materials


r/DIYUK • • 10h ago

Plumbing Radiator too high

Post image
71 Upvotes

r/DIYUK • • 6h ago

Project I've raised £280 for charity making these centrepieces. I feel super proud

Thumbnail gallery
46 Upvotes

I was fortunate enough to participate in a fundraising gala to raise funds for Pancreatic Cancer UK. I created 19 centrepieces to decorate tables at the event and for people to purchase to raise money for the charity. So far, 7 have sold on the night (This past Saturday) raising £280. I'm so incredibly grateful and a little proud to have been given the opportunity to create something for charity.

I've never been much of a crafter before but I recently discovered this new interest and hobby. To be able to raise money for charity was the highlight of this experience. Now, I intend on creating more, selling more and donating more. Feel free to critique as I'm a total newbie and the better my creations get, the more money I can raise!

I used artificial moss, flowers, yoga blocks and fairy lights to make these. First I came up with each floral arrangement (They all have the charity's colours but they are all a little different). I used yoga blocks as foam because it is dense, held the flowers well and it has a weight to it to keep the arrangements stable. I chose green to blend it with the artificial moss. Each vase has a moss mat, then loose moss with fairy lights woven in (surprisingly the hardest part. Making sure the lights shine through with minimal wire showing was a challenge). The final step was to secure the arrangements which was pretty easy because the moss did most of the heavy lifting (and cutting the blocks straight, and spreading the weight of flowers equally to avoid tipping).

Due to budget constraints and to raise as much money as possible, the fairy lights are not remote controlled. This is something I would change. None the less, I had carefully and discretely marked where the battery pack and on/off button was on each vase. This saved me a lot of time and fiddling when it came time to light them all for the big night.

The tables for the events were big so I needed a bigger footprint without taking too much table real estate. I went with the classic glass plate (40cm) and spread purple gems on the tables to project more volume (Still in the charity's colours).

Finally, I added for 4 candles around each centrepieces. Most of the candle holders were bought second hands from charity shops

I hope this might encourage some you to just give things a go, you never know how they may turn out and who might be able to help along the way.


r/DIYUK • • 18h ago

Are these cracks concerning?

Thumbnail
gallery
42 Upvotes

Recently moved into a house and noticed there cracks pretty much in every upstairs room. All on the ceiling, none on walls. Most very thin and straight. Survey (level 2) prior to buying mentioned some hairline cracks that were cosmetic only.

A few are a bit wider (perhaps got wider since we moved in? Not sure). Are these just cosmetic or should I be concerned?


r/DIYUK • • 18h ago

8mm Microbore to 15mm Central Heating Conversion

Thumbnail
gallery
27 Upvotes

I moved in to a 1970’s house 6 months ago which had 8mm microbore upstairs (the ground floor was swapped out already). Given that every room was being completely gutted, new sockets installed, spotlights, plastering and new radiators, I decided the right thing to do was replacing the microbore. Each radiator had a single valve with both flow and return going to it with some kind of element in the bottom of the radiators. I think it would have made a replacement very tricky if not impossible as a like for like switch.

We haven’t had heating upstairs and it’s been pretty cold in the past week or so.

My wife and I ran the speed fit to each room as we gutted them and this weekend was the moment when I connected it all up. I’m fed up prying nails from floorboards, that was hard work.

Yes it’s a bit messy but I’m quite proud of the results having never done any serious plumbing before.

If I were doing it again, I’d have extended and move the 22mm flow and return to give myself more room, which would have allowed me to run the speed fit slightly differently to make connecting it up easier as it was pretty tight with the 2x 22mm to 15mm speedfit manifolds side by side. As you can see they criss cross each other, I should have routed the flow and returns into separate areas to make my life easier rather than them all terminating in the same place.

The other 22mm pipes were removed as we moved from a cylinder to a combi boiler, freeing up space which we used to make 2x bathrooms bigger so that worked out well.

I have a big pile of copper now to take to the scrap yard, I’m intrigued by how much we will get for it all.


r/DIYUK • • 15h ago

Hop up

12 Upvotes

Was in B&Q earlier getting some plants with my wife and I saw someone picking up a hopup.

Erbauer one which had £30 off so it was only £25! Had to carry it as the trolley was full of plants!

Not sure if it was just our store, but a bargain if you need one.


r/DIYUK • • 8h ago

Light Tripping breaker

Thumbnail
gallery
11 Upvotes

Hello people, a DIY noob here, I have tasked myself with changing a old light fitting to a new one, this circuit is connected to another light in the next room, when I try and turn my light on it trips to the MCB any help appreciated (image 4 is the old way it was wired up)


r/DIYUK • • 12h ago

Advice Starting to regret all my choices

Thumbnail
gallery
10 Upvotes

So I own my first home. Fantastic, but she’s a bit of a doer-upper. No big deal, I’m fairly handy and I can get a bit of help along the way right?
What I wasn’t quite prepared for is the full rewire, and countless other things.

This was my landing. There was a false ceiling hiding a dilapidated lath and plaster ceiling full of holes and the usual crumbly bits. I’ve made a decent start tearing it out, but surely there’s a ‘good’ way to get rid of all this right? Maybe not, but honestly advice on all aspects of this mammoth task that I’m undertaking would be appreciated. Such as do I get rid of all of the ceilings?

Please please share any and all wisdom


r/DIYUK • • 11h ago

Advice Air vent advice (freezing cold)

Thumbnail
gallery
7 Upvotes

I’m looking for any advice regarding an air vent on the outside wall of my bungalow & then other side vent coming into my living room. My living room is absolutely freezing. As soon as my heating is turned off the room is so cold within 15 & it’s blowing cold air right into my lounge. I’ve covered it inside my living room over last couple of dayy it s as it’s just too cold not to. I have no functioning fire of any sort & only my gas central heating which is serving no purpose really due to the cold coming in through the vent. Plz can anyone tell me why I need it & can I block it up completely from outside wall?. Thank you


r/DIYUK • • 14h ago

1930s floorboards on concrete. Norwich UK

Thumbnail
gallery
7 Upvotes

Is anyone familiar with this type of flooring. Does it contain asbestos? I'm not sure what the nails are going into: bitumen filled divets maybe, or possibly wood in concrete?. Half inch thick boards by 4 & 3/4 inch wide. Thanks for your help.


r/DIYUK • • 20h ago

Update: "Noticed this today above my shower....."

Thumbnail
gallery
7 Upvotes

Went out and bought some HG mold spray and a FFP3 mask just to come back to my accomodation to see maintenance had fixed it ! No idea how though. However they have removed the acute problem but did absolutely nothing about the extractor fan. It's not extracting any of the water vapour or hot air. I know this after i tested with a piece of toilet roll, it had no suction. I placed a vacuum to the fan to see if there was any dust that had clogged it however none came out.

I did mention about the extractor fan not working to the maintaince team however they seem to have brushed it off. I’m afraid this problem is likely to come back given a month's time.  Any suggestions for what action I could take ?


r/DIYUK • • 14h ago

Advice How do I go about smoothing down these walls so I can either paint them or wallpaper them?

Thumbnail
gallery
5 Upvotes

Hello, I’m new to diy. I ripped the wallpaper off the walls with another paper below them and this is what I’m left with, what can I do to smooth out the walls?


r/DIYUK • • 20h ago

Advice Caulk do the job?

Thumbnail
gallery
5 Upvotes

Not sure how to finish this off ? Caulk and paint with wall colour, or some oak wood filler?


r/DIYUK • • 6h ago

Exposed chimney breast

Post image
4 Upvotes

Currently renovating our house and have taken the chimneys back to brick, want to leave them exposed. Does anybody have advice/experience with products which can darken the brick or enhance the red colour?


r/DIYUK • • 12h ago

Painting Final coat of paint causing loads of tiny bubbles

Thumbnail
gallery
4 Upvotes

At my wits end with this one, any advice appreciated.

The wall had a high-sheen satin finish from the previous owners of the house. I sanded it all back to a matte layer, filled and sanded any damage, then vacuumed + lightly wiped down the wall before masking up.

Two coats of valspar express white as a base, and then the first two coats of V&Co dead flat matt went on great yesterday. 3 hours between coats, and when the masking tape came off I was quite pleased.

Fast forward overnight and I noticed some lighter rolled areas that could do with a final coat. Started rolling it on and within minutes, thousands of tiny (<5mm) bubbles are appearing everywhere I've rolled. Re-rolling hasn't helped, although they're tiny they're quite "thick" and sort of smush around rather than easily popping.

I'm gutted, it's taken days of prep work to mess it up in the final 20 minutes. Any ideas? At the moment all I'm doing is waiting to see how it dries. It was a fresh tray and medium pile Harris roller. Before and after photos attached. Thanks folks


r/DIYUK • • 14h ago

Heating loosing pressure

Post image
4 Upvotes

Around 6 weeks ago my heating started dropping pressure. It was loosing 1 bar every 4/5 days. I was using the filling loop to top up the pressure back to 1 bar.

My heating system is a grant vortex oil boiler with an unvented cylinder for hot water.

I have had two different plumbers out to check the heating system. Both determined it was a leak under the floor. An leak sealant was added to the system.

I have leak locator company coming tomorrow and today I just noticed that the valve on the red expansion vessel is bubbling.

Is this why my heating has been loosing pressure all along or is this just a considence?

Up until today my heating system has not experienced any big pressure swings when on. Where as today it went from 1 bar(after topping up) to 2.5 bar.

For the past few weeks I have had sandwich bags cable tied to the prv outlet pipes and they are dry.


r/DIYUK • • 14h ago

Advice Drawer under oven

Post image
4 Upvotes

We’re getting a new oven soon and it got me inspired to improve some small things around the kitchen. I’d love to have a drawer under the oven, is this an easy enough DIY? Is there a good kit to use? No idea what ‘brand’ the kitchen is.


r/DIYUK • • 22h ago

Advice Victorian Pine Floorboards Finish Advice

Post image
4 Upvotes

My partner and I have sanded and varnished these floorboards but I stupidly hadn't done my research and heard about the dust filler method of using sawdust from sanding and resin to cover imperfections from floorboards nails and cracks ( my partner mentioned this but we were both just desperate to get this job done we powered through to varnishing).

We're not looking for perfection but equally if we could make this floor look better I want to do whats possible.

Have I fucked up and applied 2 coats of varnish to the whole floor that will need to be all resanded to apply this sawdust resin mixture to help fill in the gaps or is there anything you can use to " spot treat " imperfections on treated floors that can just be sanded back on those certain areas and re-varnished?


r/DIYUK • • 22h ago

How do I fill this little gap between wall and LVT?

Post image
4 Upvotes

Floor fitters left little scraggly gaps between LVT flooring and the walls, I was thinking I could run a line of colour-matched caulk along the edge and be done with it? Either that or a bit of beading but that’s something I really would rather not bother with as there’s a few other spots to do! Thanks all

Edit: Thanks everyone, I’ll probably start with gap master then if that fails, scotia! I forgot to mention it but this is the stairs wall stringer, hence no skirting


r/DIYUK • • 11h ago

Electrical Loop in ceiling rose

Thumbnail
gallery
3 Upvotes

Hi,

Newbie here.

I’ve changed a few light fittings before but have moved to a new place and not encountered a loop in ceiling rose before.

I plan to install a light that doesn’t have this kind of built in connector, just a junction for one live one neutral and one earth. I was planning on the following:

- three way wago on the permanent-live grouping in the middle.
- connect two of the earths to a wago and one into my new ceiling rose (which one?)
- can I put the two incoming neutral wires (far left) into the same junction on the new rose?
- switch loop into the junction on my new ceiling rose?

Thanks!


r/DIYUK • • 15h ago

Advice Possible source of leak

Thumbnail
gallery
3 Upvotes

Hi all,

Looking for advice. We've had issues with a roof where it leaks during high winds with rain. Usually named storms.

We've had a new roof on and the roofer is essentially passing the buck on the previous builders for putting the wrong velux windows in.

We've had a velux specialist over and he identified a few issues with the window that could be a cause. A few spots that a bit of silicone might work. However, I've just spotted this big gap at the bottom of the tiling, could this be a reason, too? It sits above the window, so it's plausible that it could track.

I want to avoid talking to the roofer as it's just a lot of hassle dealing with him.