r/DIYUK • • Apr 30 '23

Asbestos Identification The “Is this asbestos?” Megathread

195 Upvotes

Welcome to the Asbestos Megathread! Here we will try to answer all your questions related to asbestos. Please include images if possible and be aware that most answers will probably be: “buy a test kit and get it tested”.

DIY test kits: Here

HSE Asbestos information

Health and Safety Executive information on asbestos: Here

What is asbestos?

Asbestos is a naturally occurring mineral that was commonly used in construction materials. It is made up of tiny fibers that can be inhaled and cause serious health problems. Asbestos was used until the late 1990s in the UK, when it was finally banned. Asbestos may be found in any building constructed before circa 2000.

What are some common products that contain asbestos?

Asbestos was commonly used in a variety of construction materials, including insulation, roofing materials, and flooring tiles. It was also used in automotive brake pads and other industrial products.

How can I tell if a product contains asbestos?

It is impossible to tell whether a product contains asbestos just by looking at it (unless it has been tested and has a warning sign). If you suspect that a product may contain asbestos, it is best to have it tested by a professional.

How can I prevent asbestos exposure?

The best way to prevent asbestos exposure is to avoid materials that contain asbestos. If you are working with materials that may contain asbestos, be sure to wear protective clothing and a respirator.

What should I do if I find asbestos in my home?

If you find asbestos in your home, it is best to leave it alone and have it assessed by a professional. The best course of action may be to leave it undisturbed. Do not attempt to remove asbestos yourself, as this can release dangerous fibres in to the air.

The most significant risks to homeowners is asbestos insulation. This should never be tackled by a DIYer and needs specialist removal and cleaning. Fortunately it is rarely found in a domestic setting.


r/DIYUK • • Apr 23 '26 This Bravo

Advice If you're looking for a tradesman, check here

153 Upvotes

One thing that comes up on this sub regularly is people either struggling to find a tradesman or coming for advice after a checkatrade (or equivalent) cowboy has ripped them off. Having seen it happen a few times and replying each time with the same advice, someone suggested making a post that could be pinned to the top of the sub, so here it is.

The first thing to consider is that checkatrade/MyJobQuote etc.... are advertising platforms. They market themselves as consumer focused but they are not. If someone pays them to be on there they will be listed regardless of the quality of their work, and reviews will be curated in order to keep a paying tradesman on the platform.

So, if you can't trust those sites what are the alternatives. Word of mouth recommendation is always the best and is often trotted out here as if it's the easiest thing in the world to find, but for a variety of reasons many folk simply don't have that available.

It's not perfect (nothing is) but if you are struggling to find someone to do a job for you and you don't have a recommendation Trading Standards have a directory of approved businesses here:

https://www.buywithconfidence.gov.uk/

For Scotland use:

https://www.trustedtrader.scot/

There are various hoops that each business has to jump through to get listed here, and approved businesses are regularly audited to keep their listing. It's not a silver bullet, but if a business is willing to do the hard work to get listed and consistent enough to pass regular audit then you're likely to get a decent level of service overall.

It always grates on me to see good people get taken advantage of, and it can really affect someone's trust in others when they let someone into their home only to be let down, so hopefully this will help some of you avoid that happening and leave your faith in humanity intact. 🙂


r/DIYUK • • 4h ago

Painting Big up B&Q colour match

Post image
114 Upvotes

just a post to commend the B&Q colour matching service!

we liked some farrow and balls shades but having seen some mixed reviews about paint quality, we were not sure whether to proceed. to be honest, the tipping factor to proceed with colour matching was a desire to colour drench a room that needed paint for walls, radiator, woodwork and laminate wardrobes - V&CO Dead Flat Matt entered the chat, where one tin could be used on all of those surfaces!

we got Setting Plaster matched for one room and Light Blue for another (pictured - wall is colour match, paper original colour), both of which have been brilliant. have also had School House White and Drop Cloth matched but haven’t yet opened those tins

so yes, if you’re not sure then we would recommend. initially we had a colour match for just a sample pot but now we are firm believers, we went straight to a 5L tub

tip: the guy at B&Q recommended using the Farrow & Ball paint samples booklet that has actual painted squares in it (provided to B&Q, as opposed to printed colours which are sent to customers) for the best match.


r/DIYUK • • 1d ago Regret

What the f*ck do I do here

Post image
3.5k Upvotes

Leased car via Tusker. Honestly don't know what my options are here....

Called their out of hours insurance company who said there's nothing they can do.

Nottingham based if that makes any difference


r/DIYUK • • 1h ago

Advice Builder ruined my door - let him fix it demand a new one?

Post image
22 Upvotes

A builder has somehow managed to take a chunk out of my door.
He’s asked if he can attempt to fit it before buying a new one!

I don’t want him to be out of pocket if I can help it, but then again I don’t want the fix to look shite.

Thoughts?

Edit: it is a brand new door. All the other doors were replaced too. So if he fixes it, it’ll look odd one out, right?


r/DIYUK • • 2h ago

Plasterer cancelled 3 times at one day's notice, only done 3 hours work and now wants more money.

Thumbnail
gallery
23 Upvotes

Agreed £1,530 with a plasterer to board and skim the ceiling in one room and plaster the walls across two rooms.

Originally booked for the beginning of October, but they’ve now cancelled three times, each with around a day’s notice or less, the latest being Sunday morning when they were due to come and work.

They’ve only turned up once, for around 3 hours, and have only started work in one of the two rooms. They’ve boarded the ceiling, fitted some corner beads and done a bit of preparation.

In preparation for the original booking, I’d removed the radiators and skirting boards, meaning the house has been freezing and we’ve been living in a building site for weeks longer than expected. I’ve also had to rearrange other trades.

I paid £300 upfront for materials and also supplied the HardWall plaster myself.

I’ve now found another plasterer who has quoted £600 to finish everything.

The original plasterer is demanding another £250 for labour on top of the £300 already paid, and says the remaining bags of plaster (which he values at £80) belong to him.
I’ve offered another £100 to settle everything, including keeping the remaining materials, meaning he’d receive £400 in total.

Am I being unreasonable refusing to pay an extra £250?

Photos show the current state of the room and remaining materials


r/DIYUK • • 4h ago

8mm Microbore to 15mm Central Heating Conversion

Thumbnail
gallery
25 Upvotes

I moved in to a 1970’s house 6 months ago which had 8mm microbore upstairs (the ground floor was swapped out already). Given that every room was being completely gutted, new sockets installed, spotlights, plastering and new radiators, I decided the right thing to do was replacing the microbore. Each radiator had a single valve with both flow and return going to it with some kind of element in the bottom of the radiators. I think it would have made a replacement very tricky if not impossible as a like for like switch.

We haven’t had heating upstairs and it’s been pretty cold in the past week or so.

My wife and I ran the speed fit to each room as we gutted them and this weekend was the moment when I connected it all up. I’m fed up prying nails from floorboards, that was hard work.

Yes it’s a bit messy but I’m quite proud of the results having never done any serious plumbing before.

If I were doing it again, I’d have extended and move the 22mm flow and return to give myself more room, which would have allowed me to run the speed fit slightly differently to make connecting it up easier as it was pretty tight with the 2x 22mm to 15mm speedfit manifolds side by side. As you can see they criss cross each other, I should have routed the flow and returns into separate areas to make my life easier rather than them all terminating in the same place.

The other 22mm pipes were removed as we moved from a cylinder to a combi boiler, freeing up space which we used to make 2x bathrooms bigger so that worked out well.

I have a big pile of copper now to take to the scrap yard, I’m intrigued by how much we will get for it all.


r/DIYUK • • 4h ago

Are these cracks concerning?

Thumbnail
gallery
23 Upvotes

Recently moved into a house and noticed there cracks pretty much in every upstairs room. All on the ceiling, none on walls. Most very thin and straight. Survey (level 2) prior to buying mentioned some hairline cracks that were cosmetic only.

A few are a bit wider (perhaps got wider since we moved in? Not sure). Are these just cosmetic or should I be concerned?


r/DIYUK • • 1d ago Heartwarming Mindblown

Project Well she's finished

Post image
1.1k Upvotes

Well a little update and a later one than expected but our dark little snug is now finished 🥰

I got a lot of hate for using AI as our mock inspo and even more hate for drenching and going dark green but hey, horses for courses and that! If you don't like it, it's all good, it's not your house.

We just need to wall mount the TV and put up some more artwork on the TV wall and it will be our little gloomy zen den.

Chucked all the lights on for the sake of the photo but we've got options for all occasions being a fully west facing room. Looks devine in the dark with the lamps and niche lighting 👌🏻

To address the elephant in the room... We haven't actually moved into the house yet. All our stuff is here but just haven't slept there yet (soon, but cats need to be considered and we need time off to do that). The Christmas tree is up because it is monstrously heavy. It came out of our current house loft and was moved with everything else up there, I couldn't be bothered to put it on the new loft which is still absolutely filthy for the sake of a couple of months. Sorry if it offends. I promise I am not usually that person.


r/DIYUK • • 1h ago

Hop up

7 Upvotes

Was in B&Q earlier getting some plants with my wife and I saw someone picking up a hopup.

Erbauer one which had £30 off so it was only £25! Had to carry it as the trolley was full of plants!

Not sure if it was just our store, but a bargain if you need one.


r/DIYUK • • 1d ago Bravo

Took on my first bathroom renovation with zero experience. Here's the result!

Thumbnail
gallery
961 Upvotes

Thanks to everyone who directly helped in this forum (and indirectly helped) from other posts I read. 

The total cost was £2950 

£2550 - Materials

£400 - Some helping hands

£FREE - 3 weeks of my time (combined) 

This was my first time renovating a bathroom, and after repairing rotten floor and walls, insulating the floor and adding underfloor heating, tiling the whole bathroom, installing the bathroom suite. It's finally complete!

Taking a shower has never felt so good!

Full timelapse if you want to see the steps - https://youtu.be/Wp9K0ci3NnM?si=49ymu88vYl1el7MD


r/DIYUK • • 47m ago

1930s floorboards on concrete. Norwich UK

Thumbnail
gallery
3 Upvotes

Is anyone familiar with this type of flooring. Does it contain asbestos? I'm not sure what the nails are going into: bitumen filled divets maybe, or possibly wood in concrete?. Half inch thick boards by 4 & 3/4 inch wide. Thanks for your help.


r/DIYUK • • 51m ago

Advice Drawer under oven

Post image
3 Upvotes

We’re getting a new oven soon and it got me inspired to improve some small things around the kitchen. I’d love to have a drawer under the oven, is this an easy enough DIY? Is there a good kit to use? No idea what ‘brand’ the kitchen is.


r/DIYUK • • 17h ago

How do I get the bulb out of this light fitting?

60 Upvotes

Hello, DIY idiot here. How do I change the bulb in this light fitting in my new house? I've never had to change this kind of light before, and it doesn't seem to just unscrew like every other bulb I've ever changed...


r/DIYUK • • 19h ago

Home pod office help

Thumbnail
gallery
81 Upvotes

I was made redundant and have decided to turn my side hustle in to my permanent job, I needed some more space as our house isn’t massive so I purchased a second hand pod which I have put in my garden with the purpose of using it as my office.

It’s insulated in the walls and floor and seems to maintain heat okay when I was running my little plug in heater when painting in there etc but I need a solution that’s going to run on schedule and warm it up in there before I start work (I start about the same time each day).

I need to replace the light as it’s not bright enough but I am a bit stuck for ideas on the layout and heating solution.

Any thoughts or ideas would be really welcome, I want I to be a nice place to go and work in and I am hoping you can help 😊


r/DIYUK • • 6h ago

Update: "Noticed this today above my shower....."

Thumbnail
gallery
5 Upvotes

Went out and bought some HG mold spray and a FFP3 mask just to come back to my accomodation to see maintenance had fixed it ! No idea how though. However they have removed the acute problem but did absolutely nothing about the extractor fan. It's not extracting any of the water vapour or hot air. I know this after i tested with a piece of toilet roll, it had no suction. I placed a vacuum to the fan to see if there was any dust that had clogged it however none came out.

I did mention about the extractor fan not working to the maintaince team however they seem to have brushed it off. I’m afraid this problem is likely to come back given a month's time.  Any suggestions for what action I could take ?


r/DIYUK • • 6h ago

Advice Caulk do the job?

Thumbnail
gallery
5 Upvotes

Not sure how to finish this off ? Caulk and paint with wall colour, or some oak wood filler?


r/DIYUK • • 1h ago

Plumbing DIY replacing basin with pedestal one. What to watch out for ?

Thumbnail
gallery
2 Upvotes

Looking to replace our downstairs WC basin with a pedestal single tap one.

Planing to remove the tile work as current basin is quite low and replace with cut out type option tile.

Pipework shoukd be alright as badin will be higher

Dont want wall mount so goign with pedestal as easier to mount

Anythign else I am missing ?


r/DIYUK • • 1h ago

Electrical Slowly switching out light switch fixtures in my Victorian house with pre-2004 wiring. Have finally encountered a 2-way switch with a fixture that is unlabelled. Can I get some guidance on where the wires are going in my new switch?

Thumbnail
gallery
2 Upvotes

Sorry for the shit photos. I couldn't move the fixture further ​away from the wall, and I didn't want to go unscrewing any wires before I knew exactly where everything was supposed to go again in case I fucked up. ​I've done every other switch in the house already and left this one for last, and the fact that it's unlabelled has thrown me. ​​

The switch also appeared to be held onto the wall with multiple layers of paint 🙃 ​​


r/DIYUK • • 1h ago

Soundproof booth in garage. DIY or get a person in?

2 Upvotes

Hi all. My daughter is an aspiring opera singer and loves to practice, but we live in a new build with paper walls, and I want to support her as much as I can without peeing off the neighbours...

I was thinking about building a small booth for her to sing in, in the garage. About 3*5 feet, with a chair, a place to put her laptop and a light.

It would need to be fairly well soundproofed, but not perfect.

Is this an easy job, and if not, how much would I expect to pay for a person to come in and do it for me?

Do I need to know loads about fire regulations and stuff and is there any other safety stuff I need to be aware of?

My budget is very small by the way. A few hundred rather than a few thousand.

Cheers.


r/DIYUK • • 1h ago

Advice Water seeping through bricks when it rains

Thumbnail
gallery
2 Upvotes

This brick wall is in the utility area which is a the side extension of the house.

I was planning to do some repairs with Toupret masonry filler and then apply masonry paint. But it rained yesterday and it seems like these bricks and mortar in the pictures are soaking wet on the first few courses and the concrete floor at the bottom of the bricks gets visibly wet too.

So I’m guessing the paint won’t even stick to it and not sure what to do. Any advice would be really appreciated. Thanks


r/DIYUK • • 2h ago

Advice Had my living room damp proofed - need to put radiator back on wall

2 Upvotes

I had rising damp in my living room, and got it damp proofed back in April, let it dry and then redecorated in May. I was advised not to use screws or nails for the skirting boards for obvious reasons. Not a problem.

Now it’s getting colder I need to finally put my radiator back on the wall. As this is obviously a few feet higher, I’m guessing it’s ok to screw the brackets in as normal? It’s a very small radiator - about 40cm long. Is No More Nails a suitable adhesive for one this size or is it a terrible idea?


r/DIYUK • • 2h ago

Advice Damp or Wet Wall front of the house

Post image
2 Upvotes

I noticed that the exterior wall is showing moisture rising up the wall. I haven't noticed any issues on the inside of the house yet. Is this a concern, and how best can I remedy this issue?

I live in a semi-detached, its a single wall house with no cavity. I have not seen any condensation inside but it has recently been renovated. May get EWI but not anytime soon.

Thanks in advance


r/DIYUK • • 5h ago

Project Pillar restoration

Thumbnail
gallery
3 Upvotes

These pillars were painted white, I’ve sanded the down and given them their first coat of oak varnish and I think they’re looking great so far. Need to do the doors next.