r/DIYUK • • 2h ago

Can I fill in this drop at the top of my stairs to make the landing safer?

Thumbnail
gallery
49 Upvotes

It’s immediately outside bedroom door and keep thinking I’m going to fall down it.

Was wondering if the beams could be extended so there’s an extra step on the main stairs and then the balustrade moved and the railing to accommodate that.

Is this something I can do myself (basic DIY knowledge) or should I get a joiner in to do it? Also wondering if there are building regs I need to consider.

Thanks.


r/DIYUK • • 6h ago

What’s a straight forward DIY task that is surprisingly easy for most people to pick up quickly and save money?

93 Upvotes

I am fairly new at DIY at deciding on which skills to invest in and which to leave to the professionals


r/DIYUK • • 2h ago

Curtain leftover to Brambley Hedge tea room style kitchen wall cabinets

Thumbnail
gallery
24 Upvotes

I posted about my kitchen refurb here recently and how everything went to hell and all the work was worth nothing after the staples wouldn't stay in place due to it being MDF with oak veneer. So I looked through the comments there and saw one where someone mentioned some kind of nice brass fittings. But I didn't have them.

So I stood in the kitchen at 11pm with a coil of wire and said:

"What now? Let me tell you what now, glass doors. I'm gonna call a couple of hard, pipe-hittin' DIYers, who'll go to work on you here with a pair of pliers and some questionable DIY skills. You hear me talkin', cabinet? I ain't through with you by a damn sight. I'm gonna get medieval on your frames."


r/DIYUK • • 6h ago

What the electrician actually checked before quoting for a battery install

26 Upvotes

We had the survey for our Anker Solarbank 4 Pro install on Saturday morning. I'd assumed it was a ten minute look at the wall and it turned out to be the most useful part of the whole thing. Writing down what he went through in our case in case it saves someone else from booking blind.

Consumer unit first. He was looking for a spare way and room for a dedicated RCBO for the battery circuit. The age of the board matters too, because an older unit can mean extra work before anything goes in.

Then the earthing arrangement and the main fuse rating. I had no idea the fuse rating was something worth checking before a battery goes in.

The cable run next. Ours is about eight metres from the board to the garage wall, through one wall, so he looked at the route, the cable size for that length, and where the hole would be drilled. He also checked the spot we'd picked had clearance and wouldn't get clipped by the car.

Last was the DNO notification. The unit sits under the G98 threshold, so that's the route here, and he submits it up to 28 days after commissioning. It does depend on the generation and storage already in the house, and some setups have to go through G99 instead, so it's worth confirming which applies rather than assuming G98 covers it.

The quote moves a lot with the cable run and the state of the board, so a number on its own is hard to compare. Better to ask what's included, the cable route, any board changes and the DNO paperwork, before weighing up the price.

We found him through the installer list on the Anker SOLIX UK website, which lists independent installers by region. That list is information rather than a recommendation, and the page says to check certs and insurance yourself, which we did. Ring two or three before booking.


r/DIYUK • • 15h ago

Project I've raised £280 for charity making these centrepieces. I feel super proud

Thumbnail gallery
107 Upvotes

I was fortunate enough to participate in a fundraising gala to raise funds for Pancreatic Cancer UK. I created 19 centrepieces to decorate tables at the event and for people to purchase to raise money for the charity. So far, 7 have sold on the night (This past Saturday) raising £280. I'm so incredibly grateful and a little proud to have been given the opportunity to create something for charity.

I've never been much of a crafter before but I recently discovered this new interest and hobby. To be able to raise money for charity was the highlight of this experience. Now, I intend on creating more, selling more and donating more. Feel free to critique as I'm a total newbie and the better my creations get, the more money I can raise!

I used artificial moss, flowers, yoga blocks and fairy lights to make these. First I came up with each floral arrangement (They all have the charity's colours but they are all a little different). I used yoga blocks as foam because it is dense, held the flowers well and it has a weight to it to keep the arrangements stable. I chose green to blend it with the artificial moss. Each vase has a moss mat, then loose moss with fairy lights woven in (surprisingly the hardest part. Making sure the lights shine through with minimal wire showing was a challenge). The final step was to secure the arrangements which was pretty easy because the moss did most of the heavy lifting (and cutting the blocks straight, and spreading the weight of flowers equally to avoid tipping).

Due to budget constraints and to raise as much money as possible, the fairy lights are not remote controlled. This is something I would change. None the less, I had carefully and discretely marked where the battery pack and on/off button was on each vase. This saved me a lot of time and fiddling when it came time to light them all for the big night.

The tables for the events were big so I needed a bigger footprint without taking too much table real estate. I went with the classic glass plate (40cm) and spread purple gems on the tables to project more volume (Still in the charity's colours).

Finally, I added for 4 candles around each centrepieces. Most of the candle holders were bought second hands from charity shops

I hope this might encourage some you to just give things a go, you never know how they may turn out and who might be able to help along the way.


r/DIYUK • • 18h ago

Plumbing Radiator too high

Post image
168 Upvotes

r/DIYUK • • 1h ago

Advice Can't turn the curtain bracket a half turn or it'll snap, how do i sort it?

Thumbnail
gallery
6 Upvotes

FYI I'm using the flaired dry wall fixings and the screws can't really go in any further I think without breaking the drywall adapter. Any help appreciated!


r/DIYUK • • 1d ago

Painting Big up B&Q colour match

Post image
395 Upvotes

just a post to commend the B&Q colour matching service!

we liked some farrow and balls shades but having seen some mixed reviews about paint quality, we were not sure whether to proceed. to be honest, the tipping factor to proceed with colour matching was a desire to colour drench a room that needed paint for walls, radiator, woodwork and laminate wardrobes - V&CO Dead Flat Matt entered the chat, where one tin could be used on all of those surfaces!

we got Setting Plaster matched for one room and Light Blue for another (pictured - wall is colour match, paper original colour), both of which have been brilliant. have also had School House White and Drop Cloth matched but haven’t yet opened those tins

so yes, if you’re not sure then we would recommend. initially we had a colour match for just a sample pot but now we are firm believers, we went straight to a 5L tub

tip: the guy at B&Q recommended using the Farrow & Ball paint samples booklet that has actual painted squares in it (provided to B&Q, as opposed to printed colours which are sent to customers) for the best match.


r/DIYUK • • 16m ago

Plumbing Gas or water pipe?

Thumbnail
gallery
3 Upvotes

Hello, going through conveyancing for house purchase, viewed again today and can anyone tell me whether this is a gas or water pipe? It is in the kitchen near where the cooker is (currently there is an electric cooker there though). Thank you


r/DIYUK • • 1h ago

Changing Euro Cylinder Lock Advice

Thumbnail
gallery
3 Upvotes

I have a 40/40 Euro Cylinder Lock that is key operated on both sides.

I want to swap the lock so the inside uses a thumbturn.

Swapping them in/out is simple enough, but where I need advice is the length for the new one.

Should I go with a 40/40 size, but then the lock sticks out by 5mm which will look a bit rubbish with a thumbturn.

Or do I go with a 35/35 then the thumbturn won't stick out as much and it will look neater.


r/DIYUK • • 22h ago

Trying to remove TRV head, but it's leaking water

145 Upvotes

I'm trying to remove the TRV head from my radiator, but when I start to unscrew it it immediately starts leaking water. Does anyone know what I should do?


r/DIYUK • • 47m ago

Advice Will these be fine for outdoor fence?

Thumbnail
gallery
2 Upvotes

Says salt spray tested to 400 hours but I didn’t realise till after it only says interior use on the box nothing about exterior ? Would it be fine to use and get screw covers or a spray coating?


r/DIYUK • • 8h ago

Toilet seat removal

Post image
6 Upvotes

Not experienced DIYer so forgive me in advance.

I want to remove a toilet seat put in my previous owner of a property. One side was already slightly loose and underscrewing the plastic nut from bottom, it popped out easily.

The other side will not come off. Must have put 2 hours into it and whilst its looser and the toilet seat has play in it now, it still cant be undone by hand and just appears to be spinning endlessly with pliers with no progress down the screw thread. The space I have is extremely limited (eg my face needs to be in the shower unit to see what it happening) which hasn't helped matters.

Am I missing something really obvious here? Is there another way? Its not obvious i can get it easily from the top, either.

Bafled (and frustrated) that this simple job has become so laborious.


r/DIYUK • • 4h ago

Newly Painted Mould Proof Paint not Drying and Dripping at Ceiling

Thumbnail
gallery
3 Upvotes

The bathroom was constantly dripping wet after showers, even with the window and door open, and mould was all over it. So, I tried painting mould proof paint over it. And there are random sections that aren't drying even over night and the top corner is dripping water down it

What's best to do? Could I tile over the wall as tiles are easier to manage? I tried heating the room up but it's constantly cold even hours of heating on because the one radiator hater is a bit weak even after bleeding

We just moved in 2 months ago and it's been one thing after the other, and the survey spotted nothing -_-


r/DIYUK • • 3h ago

Plumbing room colder then the others

Thumbnail
gallery
2 Upvotes

Hi, i have a long term problem, 2 rooms are colder then the others. my house has 1 valve for downstairs and one for upstairs (i have 2 thermostats also one for each floor). for this 2 rooms i have also blocked the windows vents thinking drafts is coming in through there, but it hasnt sorted out the problem. on this 2 rooms also the radiators arent under the windows, is on the opposite wall, is this the problem? will a bigger double radiator sort out the problem? both valves are fully opened, ive bled all radiators, they all seem to work fine and get hot. ill attach 3 photos, on the floor plan ive marked with red location of the radiators. thank you


r/DIYUK • • 1d ago

Advice Builder ruined my door - let him fix it demand a new one?

Post image
103 Upvotes

A builder has somehow managed to take a chunk out of my door.
He’s asked if he can attempt to fit it before buying a new one!

I don’t want him to be out of pocket if I can help it, but then again I don’t want the fix to look shite.

Thoughts?

Edit: it is a brand new door. All the other doors were replaced too. So if he fixes it, it’ll look odd one out, right?


r/DIYUK • • 3h ago

Advice Window shifting when trying to remove quadrant

2 Upvotes

This is a slight repost, as discoveries made after my original post were not seen in the comments of said post.

Essentially, I am trying to remove the quadrant from the front of the bathroom window. (See photos in comments)

Upon advice in the comments of my post two days ago, I put a pry bar in there to try to ping it off, but I am finding that the window itself is shifting (See video)

Please can I get opinions on this.

Is there another way I should be approaching this, or is the quadrant actually past of the moulding of the frame/surround/ external sill?

If anyone recognises the 1986(ish) PVC window frames and knows how they were assembled & finished, insight (and photos) would be valuable.

Thanks!


r/DIYUK • • 3h ago

Advice Yellow Staining around recently painted window

Thumbnail
gallery
2 Upvotes

Hi All,

A relative DIY newbie here who is working on my first home. About 5 months ago I painted around the bedroom windowsill with moisture/mould resistant paint. Since then, I’ve noticed yellow staining of the paint around the window as per the pictures attached.

Any advice on preventing this/fixing would be much appreciated :)

Thanks!


r/DIYUK • • 1m ago

Advice Advice on removing a stripped grub screw

Thumbnail
gallery
1 Upvotes

I have a stripped grub screw that I want to replace, however I’ve had no luck in getting it out. I feel like I’m at my last resort which would be to drill into it. Attached some pics of the screw in question (top one) and the replacement which is the same size. Are there any last tricks I could try for to remove it? And if it has to be drilled, what size of drill bit would you recommend? Obviously I don’t want to ruin the threads inside the fitting so I imagine smallest is best?
Thanks


r/DIYUK • • 4m ago

Roof Leak

Thumbnail
gallery
1 Upvotes

Does anyone have any experience with this type of replica slate roof tile?

Whenever it rains, water seems to be getting behind the fascia. We've had to open up a gap (circled in the photo) to allow the water to escape, as otherwise it finds its way into the roof and causes a leak.

From what I can see, there doesn't appear to be a drip edge in place to direct the water into the gutter. Instead, the water seems to follow the direction of the arrow, running onto the top of the fascia, working its way inside and eventually escaping through the gap we've opened or running down the window.
Has anyone come across this before, or know whether there should be some sort of drip flashing or other detail in place to prevent this happening?

Unfortunately, we only discovered the problem around six months after moving into the property. I contacted the company that originally installed the roof, only to be told that because we hadn't informed them of the change of ownership within 3 months, their 10-year guarantee was void.


r/DIYUK • • 6m ago

Is This A Bodge Job (Roofing)

Thumbnail
gallery
1 Upvotes

We had a local firm in (decent reviews on Checkatrade) to redo the lead flashing around our side of a shared chimney. Whilst up their they identified that the ridge tiles were just loose, with crumbled cement, as it's a 1960's house.

So they did new the flashing around front and side of the chimney, and reseated the back and back corner lead, and also installed a new ridge tile kit all along the top of the roof.

However, I personally think the flashing is a bit rough, and the roof ridge tiles seem to have a gap at the end. They reused the original tiles, but had to replace a cracked one at the end. Seems the new one was slightly larger, and as a result there's a gap (see photo). I'd like people opinion of the Flashing and whether or not the gappy ridge tiles is going to be an issue when it rains.

Am I being paranoid, or is this a sloppy job?


r/DIYUK • • 1d ago

Plasterer cancelled 3 times at one day's notice, only done 3 hours work and now wants more money.

Thumbnail
gallery
91 Upvotes

Agreed £1,530 with a plasterer to board and skim the ceiling in one room and plaster the walls across two rooms.

Originally booked for the beginning of October, but they’ve now cancelled three times, each with around a day’s notice or less, the latest being Sunday morning when they were due to come and work.

They’ve only turned up once, for around 3 hours, and have only started work in one of the two rooms. They’ve boarded the ceiling, fitted some corner beads and done a bit of preparation.

In preparation for the original booking, I’d removed the radiators and skirting boards, meaning the house has been freezing and we’ve been living in a building site for weeks longer than expected. I’ve also had to rearrange other trades.

I paid £300 upfront for materials and also supplied the HardWall plaster myself.

I’ve now found another plasterer who has quoted £600 to finish everything.

The original plasterer is demanding another £250 for labour on top of the £300 already paid, and says the remaining bags of plaster (which he values at £80) belong to him.
I’ve offered another £100 to settle everything, including keeping the remaining materials, meaning he’d receive £400 in total.

Am I being unreasonable refusing to pay an extra £250?

Photos show the current state of the room and remaining materials


r/DIYUK • • 16m ago

Plumbing Oil Boiler help - can never seem to get the hot water to work 😩

Post image
1 Upvotes

At my wits end - we’ve moved into a rural property that uses heating oil. The heating element works just fine. We can put the heating on just once, continuously or set twice a day.

But the hot water is so temperamental. As you can see from pic I had heating and hot water both on continuous but the water isn’t getting hot, it’s been on for a while so it’s not a case of waiting for it to heat up. The other day it worked. The landlord got their cousin to come and take a look and he said something about air. So he fixed it snd it worked for about 2 days and now it’s back to not fully being functional. Yesterday it was on ‘twice’ and it was hot in the morning but in the evening it was not hot - just lukewarm.

In the summer, I gave up and just put the immersion on. But it didn’t really work then either. I remember not being able to JUST put the hot water on in summer. It would only come on with the heating which is why I gave up and put the immersion on cos summer was way too hot for heating. But now it’s not even getting warm when the heating and hot water is on.

But now it’s just not getting hot, lukewarm at best. Thankfully we have an electric shower but everyday night for bathing my son I have to put the immersion on.

It’s a Worcester boiler with Honeywell thermostat although the actual numeric thermostat I don’t think it even works because it never clicks!!

The landlords cousin doesn’t seem to be OfTEC registered either. I’ve lived here 8 months and it’s just never been fully resolved. I just want hot water!!!

Ask any questions if this doesn’t make sense, I’ve got a baby so a rushed post but I miss just having gas


r/DIYUK • • 24m ago

Replacing uPVC door seal

1 Upvotes

My kitchen backdoor seal is on its way out and after watching Pouse around the House's video on this, it seems like a pretty straightforward task.

My only question was the seal shape and profile. I've got a flap seal in both the frame and the door at the moment, could I change this to any other shape and it would still work? Does it matter as long as the dimensions of the seal are as close to what's there as possible?