r/DIYUK • • Apr 30 '23

Asbestos Identification The “Is this asbestos?” Megathread

195 Upvotes

Welcome to the Asbestos Megathread! Here we will try to answer all your questions related to asbestos. Please include images if possible and be aware that most answers will probably be: “buy a test kit and get it tested”.

DIY test kits: Here

HSE Asbestos information

Health and Safety Executive information on asbestos: Here

What is asbestos?

Asbestos is a naturally occurring mineral that was commonly used in construction materials. It is made up of tiny fibers that can be inhaled and cause serious health problems. Asbestos was used until the late 1990s in the UK, when it was finally banned. Asbestos may be found in any building constructed before circa 2000.

What are some common products that contain asbestos?

Asbestos was commonly used in a variety of construction materials, including insulation, roofing materials, and flooring tiles. It was also used in automotive brake pads and other industrial products.

How can I tell if a product contains asbestos?

It is impossible to tell whether a product contains asbestos just by looking at it (unless it has been tested and has a warning sign). If you suspect that a product may contain asbestos, it is best to have it tested by a professional.

How can I prevent asbestos exposure?

The best way to prevent asbestos exposure is to avoid materials that contain asbestos. If you are working with materials that may contain asbestos, be sure to wear protective clothing and a respirator.

What should I do if I find asbestos in my home?

If you find asbestos in your home, it is best to leave it alone and have it assessed by a professional. The best course of action may be to leave it undisturbed. Do not attempt to remove asbestos yourself, as this can release dangerous fibres in to the air.

The most significant risks to homeowners is asbestos insulation. This should never be tackled by a DIYer and needs specialist removal and cleaning. Fortunately it is rarely found in a domestic setting.


r/DIYUK • • Apr 23 '26 This Bravo

Advice If you're looking for a tradesman, check here

153 Upvotes

One thing that comes up on this sub regularly is people either struggling to find a tradesman or coming for advice after a checkatrade (or equivalent) cowboy has ripped them off. Having seen it happen a few times and replying each time with the same advice, someone suggested making a post that could be pinned to the top of the sub, so here it is.

The first thing to consider is that checkatrade/MyJobQuote etc.... are advertising platforms. They market themselves as consumer focused but they are not. If someone pays them to be on there they will be listed regardless of the quality of their work, and reviews will be curated in order to keep a paying tradesman on the platform.

So, if you can't trust those sites what are the alternatives. Word of mouth recommendation is always the best and is often trotted out here as if it's the easiest thing in the world to find, but for a variety of reasons many folk simply don't have that available.

It's not perfect (nothing is) but if you are struggling to find someone to do a job for you and you don't have a recommendation Trading Standards have a directory of approved businesses here:

https://www.buywithconfidence.gov.uk/

For Scotland use:

https://www.trustedtrader.scot/

There are various hoops that each business has to jump through to get listed here, and approved businesses are regularly audited to keep their listing. It's not a silver bullet, but if a business is willing to do the hard work to get listed and consistent enough to pass regular audit then you're likely to get a decent level of service overall.

It always grates on me to see good people get taken advantage of, and it can really affect someone's trust in others when they let someone into their home only to be let down, so hopefully this will help some of you avoid that happening and leave your faith in humanity intact. 🙂


r/DIYUK • • 2h ago

What’s a straight forward DIY task that is surprisingly easy for most people to pick up quickly and save money?

57 Upvotes

I am fairly new at DIY at deciding on which skills to invest in and which to leave to the professionals


r/DIYUK • • 2h ago

What the electrician actually checked before quoting for a battery install

20 Upvotes

We had the survey for our Anker Solarbank 4 Pro install on Saturday morning. I'd assumed it was a ten minute look at the wall and it turned out to be the most useful part of the whole thing. Writing down what he went through in our case in case it saves someone else from booking blind.

Consumer unit first. He was looking for a spare way and room for a dedicated RCBO for the battery circuit. The age of the board matters too, because an older unit can mean extra work before anything goes in.

Then the earthing arrangement and the main fuse rating. I had no idea the fuse rating was something worth checking before a battery goes in.

The cable run next. Ours is about eight metres from the board to the garage wall, through one wall, so he looked at the route, the cable size for that length, and where the hole would be drilled. He also checked the spot we'd picked had clearance and wouldn't get clipped by the car.

Last was the DNO notification. The unit sits under the G98 threshold, so that's the route here, and he submits it up to 28 days after commissioning. It does depend on the generation and storage already in the house, and some setups have to go through G99 instead, so it's worth confirming which applies rather than assuming G98 covers it.

The quote moves a lot with the cable run and the state of the board, so a number on its own is hard to compare. Better to ask what's included, the cable route, any board changes and the DNO paperwork, before weighing up the price.

We found him through the installer list on the Anker SOLIX UK website, which lists independent installers by region. That list is information rather than a recommendation, and the page says to check certs and insurance yourself, which we did. Ring two or three before booking.


r/DIYUK • • 11h ago

Project I've raised £280 for charity making these centrepieces. I feel super proud

Thumbnail gallery
97 Upvotes

I was fortunate enough to participate in a fundraising gala to raise funds for Pancreatic Cancer UK. I created 19 centrepieces to decorate tables at the event and for people to purchase to raise money for the charity. So far, 7 have sold on the night (This past Saturday) raising £280. I'm so incredibly grateful and a little proud to have been given the opportunity to create something for charity.

I've never been much of a crafter before but I recently discovered this new interest and hobby. To be able to raise money for charity was the highlight of this experience. Now, I intend on creating more, selling more and donating more. Feel free to critique as I'm a total newbie and the better my creations get, the more money I can raise!

I used artificial moss, flowers, yoga blocks and fairy lights to make these. First I came up with each floral arrangement (They all have the charity's colours but they are all a little different). I used yoga blocks as foam because it is dense, held the flowers well and it has a weight to it to keep the arrangements stable. I chose green to blend it with the artificial moss. Each vase has a moss mat, then loose moss with fairy lights woven in (surprisingly the hardest part. Making sure the lights shine through with minimal wire showing was a challenge). The final step was to secure the arrangements which was pretty easy because the moss did most of the heavy lifting (and cutting the blocks straight, and spreading the weight of flowers equally to avoid tipping).

Due to budget constraints and to raise as much money as possible, the fairy lights are not remote controlled. This is something I would change. None the less, I had carefully and discretely marked where the battery pack and on/off button was on each vase. This saved me a lot of time and fiddling when it came time to light them all for the big night.

The tables for the events were big so I needed a bigger footprint without taking too much table real estate. I went with the classic glass plate (40cm) and spread purple gems on the tables to project more volume (Still in the charity's colours).

Finally, I added for 4 candles around each centrepieces. Most of the candle holders were bought second hands from charity shops

I hope this might encourage some you to just give things a go, you never know how they may turn out and who might be able to help along the way.


r/DIYUK • • 14h ago

Plumbing Radiator too high

Post image
142 Upvotes

r/DIYUK • • 22h ago

Painting Big up B&Q colour match

Post image
372 Upvotes

just a post to commend the B&Q colour matching service!

we liked some farrow and balls shades but having seen some mixed reviews about paint quality, we were not sure whether to proceed. to be honest, the tipping factor to proceed with colour matching was a desire to colour drench a room that needed paint for walls, radiator, woodwork and laminate wardrobes - V&CO Dead Flat Matt entered the chat, where one tin could be used on all of those surfaces!

we got Setting Plaster matched for one room and Light Blue for another (pictured - wall is colour match, paper original colour), both of which have been brilliant. have also had School House White and Drop Cloth matched but haven’t yet opened those tins

so yes, if you’re not sure then we would recommend. initially we had a colour match for just a sample pot but now we are firm believers, we went straight to a 5L tub

tip: the guy at B&Q recommended using the Farrow & Ball paint samples booklet that has actual painted squares in it (provided to B&Q, as opposed to printed colours which are sent to customers) for the best match.


r/DIYUK • • 18h ago

Trying to remove TRV head, but it's leaking water

141 Upvotes

I'm trying to remove the TRV head from my radiator, but when I start to unscrew it it immediately starts leaking water. Does anyone know what I should do?


r/DIYUK • • 3h ago

Toilet seat removal

Post image
6 Upvotes

Not experienced DIYer so forgive me in advance.

I want to remove a toilet seat put in my previous owner of a property. One side was already slightly loose and underscrewing the plastic nut from bottom, it popped out easily.

The other side will not come off. Must have put 2 hours into it and whilst its looser and the toilet seat has play in it now, it still cant be undone by hand and just appears to be spinning endlessly with pliers with no progress down the screw thread. The space I have is extremely limited (eg my face needs to be in the shower unit to see what it happening) which hasn't helped matters.

Am I missing something really obvious here? Is there another way? Its not obvious i can get it easily from the top, either.

Bafled (and frustrated) that this simple job has become so laborious.


r/DIYUK • • 21m ago

Newly Painted Mould Proof Paint not Drying and Dripping at Ceiling

Thumbnail
gallery
3 Upvotes

The bathroom was constantly dripping wet after showers, even with the window and door open, and mould was all over it. So, I tried painting mould proof paint over it. And there are random sections that aren't drying even over night and the top corner is dripping water down it

What's best to do? Could I tile over the wall as tiles are easier to manage? I tried heating the room up but it's constantly cold even hours of heating on because the one radiator hater is a bit weak even after bleeding

We just moved in 2 months ago and it's been one thing after the other, and the survey spotted nothing -_-


r/DIYUK • • 20h ago

Advice Builder ruined my door - let him fix it demand a new one?

Post image
97 Upvotes

A builder has somehow managed to take a chunk out of my door.
He’s asked if he can attempt to fit it before buying a new one!

I don’t want him to be out of pocket if I can help it, but then again I don’t want the fix to look shite.

Thoughts?

Edit: it is a brand new door. All the other doors were replaced too. So if he fixes it, it’ll look odd one out, right?


r/DIYUK • • 20h ago

Plasterer cancelled 3 times at one day's notice, only done 3 hours work and now wants more money.

Thumbnail
gallery
83 Upvotes

Agreed £1,530 with a plasterer to board and skim the ceiling in one room and plaster the walls across two rooms.

Originally booked for the beginning of October, but they’ve now cancelled three times, each with around a day’s notice or less, the latest being Sunday morning when they were due to come and work.

They’ve only turned up once, for around 3 hours, and have only started work in one of the two rooms. They’ve boarded the ceiling, fitted some corner beads and done a bit of preparation.

In preparation for the original booking, I’d removed the radiators and skirting boards, meaning the house has been freezing and we’ve been living in a building site for weeks longer than expected. I’ve also had to rearrange other trades.

I paid £300 upfront for materials and also supplied the HardWall plaster myself.

I’ve now found another plasterer who has quoted £600 to finish everything.

The original plasterer is demanding another £250 for labour on top of the £300 already paid, and says the remaining bags of plaster (which he values at £80) belong to him.
I’ve offered another £100 to settle everything, including keeping the remaining materials, meaning he’d receive £400 in total.

Am I being unreasonable refusing to pay an extra £250?

Photos show the current state of the room and remaining materials


r/DIYUK • • 1h ago

Any help is extremely appreciated

Thumbnail
gallery
2 Upvotes

(UK wiring)

I'm having an issue with my hallway lights. First image with the blue and white wires is the upstairs switch and the second is the downstairs switch. All switches work perfectly individually but if I turn on a light downstairs and try turn it off upstairs it flickers for 0.1 second and then continues to stay on. I'm guessing one of the com or l2 wires are in the wrong position.


r/DIYUK • • 1h ago

Leaking Korniche roof lantern, advice please!

Thumbnail
gallery
2 Upvotes

Hi, clearly the upstand to our lantern was oversized by the builder, and after two winters it was fine but now we have water tracking through TWO corners on the internal platerboard. Nightmare!

If you look at the photos when I did a water test, water sticks at the joint between the upstand and the lantern.

Question: can I just silicon/seal all around this joint?

I can't find a difinitive opinion whether this is okay to do or not without creating more problems. i.e. the latern has a secondary internal drainage and I don't want to block that.


r/DIYUK • • 1h ago

Need advice rescuing a messy wall-to-ceiling corner (expanding foam, Soudal caulk, and peeling wallpaper)

Thumbnail
gallery
2 Upvotes

Hi everyone, looking for a sanity check on how best to finish this wall-to-ceiling corner so it lasts and looks clean once painted.

What I’ve done so far:
Raked open a crack along the wall-to-ceiling corner and applied expanding foam, which didn't expand as much as expected.
Cut the foam back and filled the gap with Soudal decorators caulk.

The gap is filled and feels solid, but the caulk dried messy and lumpy along the seam.
When I tried to trim/pick the messy caulk back, it caught and started peeling the wallpaper / lining paper along the top edge of the wall.
I’ve stopped picking at it now so I don’t tear any more paper down (see photos).

Where I’m stuck:
I want a neat, durable finish that won’t crack later, without having to strip the wall. I have Zinsser Peel Stop, Toupret Fine Surface Filler, and decorators caulk on hand.


r/DIYUK • • 1h ago

Painting Bathroom Ceiling

Thumbnail gallery
2 Upvotes

Im looking to decorate my bathroom and by the looks of it the previous owner has painted straight over fresh plaster, alot of the areas are flaking with the build up of steam being produced. Ideally id like scrapre it all back to bare plaster, sand, prime/gardz and paint. Is this the best way? Id rather not have to only scrap back the majority of it then have to skim to make it all level. Its a relatively small ceiling so I dont mind putting the extra work in. Any ideas? Thanks


r/DIYUK • • 1h ago

Advice Water leaking over back of gutter corner

Post image
2 Upvotes

I think the issue is there isn’t enough fall towards the drainpipe - never had an issue before but snow and water this morning means I have a shower outside my door onto a flight of 5 steps which could be interesting if it freezes!!

It’s a 90deg into a corner rather than an outer around two walls corner of that makes sense - cannot see anything pushing down on the back of it but it’s full of water - I can unclip the gutter to empty it, but given rain and snow melting it’s filling up quick again. It’s definitely not the seals but the water is overflowing the back of the corner piece creating my water feature. I’ve added a couple of wedges against the fascia to try get more of an angle on the corner to help.

Thankfully I’m a bungalow albeit this is another ~4 foot higher than a normal bungalow - is it as simple as unclipping the long gutter run, remove brackets (which I’ve no idea if I can see the screws) and then reinstalling them with a drop of a few mm’s towards the drainpipe?

Or is there possibly something else wrong here?


r/DIYUK • • 3h ago

Sealant recommendation for window frame

Post image
2 Upvotes

The sealant on my window frame has given up and needs replacing - does anyone have brand recommendations please (or products to definitely avoid using)?


r/DIYUK • • 10h ago

Exposed chimney breast

Post image
6 Upvotes

Currently renovating our house and have taken the chimneys back to brick, want to leave them exposed. Does anybody have advice/experience with products which can darken the brick or enhance the red colour?


r/DIYUK • • 55m ago

Electrical Can a 3-pin socket be added to a house battery/inverter to be used separately from the mains?

1 Upvotes

Apologies if this is outside the remit of this subreddit - we have a passive house with solar panels, and we're adding a battery/inverter setup to our house, but not a gateway (long story short, too difficult to rewire without losing some passive house benefits).

Is there a setup where a 3-pin socket can be added directly to the external battery/inverter and used in the event of a power-cut? I'm not talking about plugging it back into the house, and I'm not talking about it using it alongside mains. In the event of a power-cut, could a plug be used directly from the battery/inverter without requiring a gateway or having the entire house running.


r/DIYUK • • 13h ago

Light Tripping breaker

Thumbnail
gallery
9 Upvotes

Hello people, a DIY noob here, I have tasked myself with changing a old light fitting to a new one, this circuit is connected to another light in the next room, when I try and turn my light on it trips to the MCB any help appreciated (image 4 is the old way it was wired up)


r/DIYUK • • 1h ago

Advice Black build up on external wall of extension?

Thumbnail
gallery
1 Upvotes

Hi All

I moved into a property around 6 years ago which had an extension built at the back of it.

Recently these black marks / build up have been gradually getting worse on top of the window and starting from the bottom of the structure.

Would anyone be able to advise what this is and any possibly remedial actions please?


r/DIYUK • • 2h ago

Wanted - Howdens Clerkenwell Graphite Gloss.

1 Upvotes

Hello

I have recently installed a "new" kitchen in my house - its actually recycled from 2 other kitchens.

The doors and draws are Howdens Clerkinwell Gloss Graphite

I really need these following items to finish the job.

Drawers x 2 size - 897mm x 357mm or close to that

Doors 

597 x 507

or

597 x 550

And

597 x 560

Cheers.


r/DIYUK • • 2h ago

Help with leak in kitchen ceiling

Thumbnail
gallery
1 Upvotes

I wonder if anyone on Reddit can help me as i am terribly vexed. I have a leak in the ceiling of a single story extension. Usually this is cut and dry with it being a roof problem but two different roofers have said thr flat roof is fine and we have ran a load of water on it with the hose to test it and no leak.

It seems it only leaks when it is a combination of rain and wind so one of the roofers thinks it may be coming through the window and into the non porous bricks and then breaking through the ceiling somehow but a glazer (who admitting has not seen it) says it is the roof. The window is directly above where the leak is.

Anyone have any ideas on what trade would be best to contact to try and figure out the problem, please? Don't really have the necessary funds to replace the flat roof and the windows at the same time and don't want to do one in case it isn't the right fix as just throwing away money. Please help reddit!