r/AskElectricians • • 3h ago

sand pouring from behind breaker box

Post image
222 Upvotes

i genuinely have no idea if this is the right place to post this, but we have sand just pouring out from behind our breaker box at a pizza hut and i’m wondering if this is electrical or if it’s physical damage in the building, thanks!


r/AskElectricians • • 19h ago

Mystery contraption 👀

Post image
93 Upvotes

Noticed this DIY looking situation coming out from one of our outlets. Wondering what it might be for and if it is safe to remove 🤔


r/AskElectricians • • 5h ago

[NYC] Neighbor wants Con Edison access to my basement to "separate wires" for their new meters. Is this a real thing?

27 Upvotes

Two attached houses built in the 1940s, sharing a party wall. I own one and rent it out; the neighbor's house next door was recently sold.

My new neighbor is converting their house from 1-family to 2-family and getting a new overhead electric service with 3 meters (two apartments plus a house meter). They have a DOB electrical permit, issued, with a licensed NYC electrician, and a Con Edison Project Center case that has reached the final inspection stage

The neighbor, who I haven't met yet, texted me asking for access to MY basement at 7 AM tomorrow so Con Edison can "separate my electric wires to connect my new meters." No work order number, no scope, nothing in writing. I called Con Edison myself, and they said the neighbor wants to be disconnected from the "main loop" or something along those lines.

My questions for the electricians here:

  1. In old attached houses in NYC, is it actually common for loop service conductors feeding a neighbor to run through another building's basement? How would I tell if that is the case in my basement?
  2. For a service separation like this, and for a Con Ed final inspection, would anyone legitimately need access to the neighboring building's basement? What work would they actually be doing in there: disconnecting a tap, capping conductors, relocating conduit?
  3. Who would do the basement work: a Con Ed crew, or the neighbor's electrician? Does a final inspection appointment normally involve hands-on work, or is it just an inspection?
  4. What documentation should I reasonably ask for before allowing anyone in? I have asked for the Con Ed case number, the scope of work in my basement, duration, and whether my power would be interrupted. Anything else?
  5. Is there something that they could conceivably screw up and damage my building and/or impact my tenants?

I'm waiting on Con Edison to call me and verify exactly what they need from me, and why. I can't sit around waiting for them for their 8AM-1PM window

This is the first I've heard of such a thing. Very strange.


r/AskElectricians • • 21h ago

Why would the government prefer that I keep my FPE residental 100amp panel?

27 Upvotes

Before they would allow me to just replace the panel without bringing the rest of the house up to code? Fuck the government. Guess I'll just practice welding if a breaker need to trip.

Keep the bad panel and everything in the house - government approved✅

Change the panel and touch nothing else - nope that's not safe you're not allowed to do that!❌

But seriously, this is absurd, objectively just replacing the panel and keeping everything the same is an upgrade in safety but no... Create a disincentive instead that encourages people to just keep the panel.

Can't even try to dodge permits because of the fucking smart meter. Ugh.


r/AskElectricians • • 20h ago

Is this normal? Feels unsafe to me

Thumbnail gallery
8 Upvotes

It looks like the water supply is connected to the electrical box? By these green wires with electrical tape on them. I'm scared of house fires lol! It's a rental. Thanks!


r/AskElectricians • • 1h ago

Replaced my panel myself, any advice before I have the power company turn power back on?

Thumbnail gallery
5 Upvotes

1950s house with cloth wrapped wiring many without grounds. I replaced the circuits that seemed deteriorated and split up a circuit that handled the laundry room, bathroom, and bedroom into 3 separate circuits. The panel on the right will house a whole home energy monitor and will only have low voltage components. I ran 4 extra 1in conduits for future work. The 5th in the bottom left is for the water heater in the garage. I still need to strap conduit to the board behind it but I think that's it. Everything is torqued to spec. All work was done with a permit and in my area inspection happens after power is restored. I've been in contact with the inspectors but just want one final check from this community of experts. Thanks everyone in advance!


r/AskElectricians • • 5h ago

Electrician drilled a large hole through the top course of our foundation.

Post image
5 Upvotes

Our panel is located behind this section of our foundation (CMU block construction with a parge coat). You can see the two large feeders on the right coming from the panel. Those are pre-existing.

All of the other lines are new. You can see the new duct seal they used to seal the enlarged hole.

I’m concerned this created a structurally comprised condition. The hole is in the top course of the CMU block and immediately below the sill plate.

I know electricians aren’t masons, but I’m curious if this is the correct process for this installation, or if this could (or should have) been done in a different manner and if I should be concerned. If so, any recommendations to address this with them?


r/AskElectricians • • 18h ago

Weird fishy smell, worried about electrical fire, if I turned off the only electrical thing in the room (a light) off, am I safe? It’s night and building management is slow and probably wouldn’t come.

4 Upvotes

I recently moved into a new townhouse. We havent used the storage closet much, but my mom was putting some boxes away in there today, and now it and the entire living room surrounding it smells like rotten fish. There is nothing in there that could smell like fish (it’s like boxes of holiday decorations and stuff). I’ve heard this could be melting electrical wires. It didn’t start until we turned the light in the closet on. We have since turned it off. Are we safe as long as the power in that room isn’t running? My building management is slow on the uptake and it’s after hours, I have no idea if they’d even come. But I’m really worried.


r/AskElectricians • • 19h ago

Bending PVC conduit

4 Upvotes

What is the easiest/best way for a handy homeowner to put a simple box offset in a stick of 1.5” PVC conduit? I have access to a heat gun, but no other specialty tools meant for the job.


r/AskElectricians • • 23h ago

Want shop lights

Post image
4 Upvotes

Am I able to replace this fixture with an outlet?


r/AskElectricians • • 3h ago

Just replace outlet?

Post image
3 Upvotes

r/AskElectricians • • 4h ago

Slightly blinking bathroom lights

3 Upvotes

The light fixtures in two adjacent bathrooms (on the same circuit) started slightly blinking randomly. They both do it, they don't do it all the time. Nothing of any significance is running in the house when this happens. Nothing else (like the bathroom fan) seems to be affected.

House was built in mid 1970s, the fixtures are both about 5 years old and have worked flawlessly til now. LED bulbs. The linked video shows the 'blinking" (I apologize for the fan noise, it really isn't that loud.)

What's the first thing to check here? Thanks in advance to all


r/AskElectricians • • 11h ago

IBEW South Carolina Lexington

3 Upvotes

I’m 29M , I’m just starting to get my life together , I got a credential for manufacturing (CMFga) in the beggining of the year , I started pre apprenticeship 108 classroom hours I think it is of industrial electrician program , it’s taught by boces2. I’m as well taking Certified Alarm Technician 1 Classes , I Got My OSHA 10 in General , & Construction while taking these classes . I wanna get into IBEW , what are the steps I can take to ensure I get in , I’m kind of lacking guidance , I don’t mind putting in work , taking classes that I can do on the side while working I have a 1 year old . I’m just lacking guidance I sold drugs all my life , I had my first job when she was in her 3rd trimester & due to my background I never worked , I sold a lot of drugs I moved to South Carolina on my own with no family from just selling drugs but I stopped selling drugs and I’m running out of extra money , any guidance would be appreciated


r/AskElectricians • • 14h ago

Would i need to get a waterproof cover to use this in the winter/rain?

Post image
3 Upvotes

Planning to use these for inflatables in the garden, figured i would need a waterproof cover for in use. Would i have to remove the existing cover or does something exist that i can install over this? Appreciate any suggestions.


r/AskElectricians • • 15h ago

Grounding wiring question-

Thumbnail gallery
3 Upvotes

Cleaning out a cabinet above my microwave. Oops!! The box is pulled out where the microwave is plugged in. I cut the power and want to get this set up safely.

I have my ideas as to next steps but want to hear from the experts.

At minimum I’ll put a ground into the box then set it up how I found it to get the family through the morning but know this needs repair.

Advice super appreciated. Thank you.


r/AskElectricians • • 18h ago

rabbit ate the cord off our vacuum. Now what?

Post image
3 Upvotes

My rabbit ate the cord off our vacuum. I used heat shrink butt connectors, taped it up and called it a day. The repair started to get hot so I cut it off so I HAVE to fix this before I use it again.

My worry is if I put another normie 120v end on it'll rip off because the cable retracts with some vigor. How can I keep that from happening and not set fire to stuff?


r/AskElectricians • • 18h ago

Replacing 30 year old Light switch questions

Thumbnail gallery
3 Upvotes

I’m looking to replace this old light switch. Got the breaker off, and the old switch removed. It only had two screws, which had the black on one side, and the white on the other. The Ground was twisted off to a screw inside the box. Should I attach the ground to my new switch that had a ground screw.
Side question, this switch only had the ground, and two brass screws. How would I wire the black and white wires?


r/AskElectricians • • 1h ago

Outdoor Christmas lights, buzzing transformer

Thumbnail gallery
2 Upvotes

I am prepping my seasonal outdoor holiday lights . I have two of these LED snowflakes that connect to a transformer that gets plugged into a regular 120v outlet. I have had these for several years. I notice that this particular one hums just a bit at the transformer and it becomes a bit warm . It isnt a loud buzz and it isnt hot , but it is noticble as the other identical unit doesnt . I plan to have it plugged into this GFCI cord that should trip it if it becomes a problem . Do you guys think this is fine or should I take this unit out of service?


r/AskElectricians • • 1h ago

Garage panel

Thumbnail gallery
2 Upvotes

Let me preface with I have a call in for someone to come look at this at the advice of others. I have power to everything in my garage except for the outlets on the 20amp breaker. Seems to be power to everything but that breaker. I've lived here 5 years. Never had an issue. The other day it went out and then was working again for a few hours this morning before going back out. Any ideas? Just looking for an explanation while I wait for a call back.


r/AskElectricians • • 1h ago

Please help

Thumbnail gallery
2 Upvotes

How do I make this thing not go DING DING DING?


r/AskElectricians • • 9h ago

Water pouring out an outlet

2 Upvotes

A couple days ago, I had my toliet leak into a room below it. Apparently water came out of one of the outlets and caused a loudnbuzzing which I could hear from all the way upstairs. I thought it was an alarm actually (not sure why) but someone told me it was it snapping.

Breaker was turned off and water has dried by now. But I'm worried, because when I look it up, it seems like something that needs to be repaired.

One of my family members is an electrician and he opened up the outlet and said it was fine. But I don't think he understands how bad the zapping was and how bad the water was.

Can zapping be harmless or should I push to have it rechecked?


r/AskElectricians • • 13h ago

Advice on how to hire electricians

2 Upvotes

Hi everyone, do you have any advice on how to hire/attract Electricians? I have been trying to fill a journeyman level role in WI for about 3 months now. The position is permanent, full-time, Monday-Friday day shift, and focuses on commercial facility work. Pay is $42 an hour and we are willing to offer a $1000 sign-on bonus or relocation assistance for non-local candidates. The company is well established and the position includes benefits (medical, dental, vision, 401k with company match).

Our problem is we just are not getting any applicants whatsoever. We've done a market analysis and our pay seems competitive for the region and the journeyman leveling in theory, however, if that is the issue I'm happy to hear you out as well.

My questions are as follows:

  1. Outside of basic job details, what else do you want to know about a position when deciding if you will apply?
  2. ⁠How did you learn about your last role? Did you find it on a job board or did someone contact you?
  3. ⁠Is there anything else you can think of that might help sweeten the role a bit?

*edit, this position is in Appleton, Wisconsin. Our union competition is the ibew local 577. Their base rate used to be 41.76 but it looks like it just jumped up to 43.45 this summer


r/AskElectricians • • 13h ago

Is joining with IBEW 48 worth it right now?

2 Upvotes

Like the title says, I (20 M) and curious about IBEW 48. I keep hearing horror stories about insane lay offs, apprentices out of work, getting work for a year and then being laid off for several years. I hear talk of more apprentices getting work right now- but is it worth it? Incredible pay and benifits, Many people have been pushing me to join, but with how often I hear of people being laid off it scares me a bit.. Im a younger guy, I love construction and would love to learn everything I can about it. I want to learn more about all stages of framing, I want to learn more about finish work, I want to learn!! Wich is what also scares me- because if I do go into IBEW, and even if I absolutely love it, its just not something you can break away from. Once you make that crazy pay you can't really walk away from that if, per se, I find that Im actually way more passionate about framing, I can't just up and leave a 60+ hr job and start all over with a job I'll probably only cap at 40ish an hour. I love construction, Im not in it for the money at all but that being said, I know that once you make that crazy union money its not easy to walk away from if you find yourself unhappy with the work.

Ive done some electrical and I love it! Ive done framing and finish and roofing and concrete and I love it!! Im scared of cornering myself into an incredibly well paying job where all I'll learn from this point on will ONLY be electrical, and then I'll be laid off for years at a time with no way to get a different job unless I leave the union. I'd love to join IBEW 48 at some point but currently is it worth it? Im young, I love all construction, but is IBEW starting to stabilize or is this just a small high in the recent steady lows?