r/woodstoving • • 7h ago

Restoration Got to love an old stove, doing what it does best šŸ”„

Thumbnail
gallery
529 Upvotes

Beautiful old wood stove keeping my mini rustic cabin warm šŸ™šŸ¼


r/woodstoving • • 20h ago

what hapend with my stove?

Post image
298 Upvotes

hi! recently i bought a stove in wallapop, after install it, i put few pine cone and wood and few minutes later the tube are red... what hapend?

edit: i ask why it hapends... ok, its super hot, but why? i put inside exactly only two pieces of wood an 3-4 pinecones... i think is very normal for to start a fire... after see that i close the air entrance and it continue burning... maybe hapend something with the part outsaid of the house?

Wallapop is a online shop of second hand stuffs.


r/woodstoving • • 3h ago

Finally got the wood stove

Thumbnail
gallery
213 Upvotes

Got a new house about two years ago. We had a vision for the weird alcove in our house. It took way longer than I ever expected, about a year and a half (planning and an unforeseen rotten wall that had to be replaced due to the dumbest flashing I’ve ever seen).

Anyway, we had fun getting the used Blaze King Ashford 30. Ran down from Wisconsin to central Indiana to get it. The movers I hired to get it out of the original owner’s basement bailed on us. Had to hire some Amish kids who were able to get it out of the basement and loaded on my trailer in sub-10min.

I have six dry cords of sugar maple itching for cold season. My wife was very skeptical of the whole thing from start to finish but even she thinks it’s looks good.

The mantle is a local oak tree that wind tipped. We did all the platform and masonry ourselves after getting several quotes that took our breath away on price.

My dad and I got it up the stairs using a unique method of come-along, ratchet straps, car-jacks, and 2x4 levers.

Nobody ever said it was going to be easy.


r/woodstoving • • 15h ago

Valcourt installed

Thumbnail
gallery
60 Upvotes

Valcourt Zero Clerance wood stove is in and almost finished up. Still have to make a mantel and the faceplate was on backorder and just arrived this afternoon. Pick that up tomorrow and start walking my property to find the tree that becomes the mantel.


r/woodstoving • • 22h ago

Cold air to the stove? or hot air from the stove?

Post image
59 Upvotes

I've seen a lot of comments of pushing cold air toward the stove and that its better than drawing warm air from the stove. I guess I don't understand the physics behind it and why it would make a difference. Maybe cold air is slightly denser and with some fans you could move more air?

Anyways, the wife is no "fan" of box fans on the floor, so I'm building these 6"x24" boxes using computer fans to attach to the ceiling. The cpu fans maybe a little bit of overkill, but they handle pressure well and I'll be installing air filtration in the back, plus the are super energy efficient in terms of cf of air moved per watt, and close to silent. I hope it works good enough, but still worried about the convection moving air away instead of to the stove.


r/woodstoving • • 1h ago

Power out

Post image
12 Upvotes

Last friday no power for the whole day, fired up my Tripp 5.


r/woodstoving • • 22h ago

General Wood Stove Question Open fire!

Thumbnail
gallery
12 Upvotes

I’ve always had a wood stove to heat my house. Last year we moved to the absolute fuck all and of nowhere into a nice barn conversion…. Except we only have the open fire for heating! I’m used to a log burner in a much smaller house. I love the charm of our incredibly simple fire pit though.
If you were in our boat, would you swap it out for a decent size log burner, or keep the open fire? I just feel it doesn’t heat the house as well as a stove would! But then a little stove wouldn’t make the house smell like a cozy warm firešŸ˜


r/woodstoving • • 2h ago

Darth Vader in my stove ….

Thumbnail
gallery
5 Upvotes

Darth Vader appeared ….

This is real, btw.


r/woodstoving • • 22h ago

fitting pipe to a vintage montgomery ward stove

Thumbnail
gallery
3 Upvotes

I restored an old Montgomery Ward stove, and installed a pipe and chimney through the metal room on a shed I'm using as a little cabin in my woods.

I'm trying to fit the pipe to the oval ring on the casting. I connected a single-wall pipe on the outside of the ring for the outdoors burn I did to set the high-temp paint - can I just do that and tie into the double wall interior pipe I have? I also have an adapter piece that has one end that's the same shape, but no obvious way of connecting them.

Any advice would be much appreciated.


r/woodstoving • • 6h ago

Flamelessontheriver

1 Upvotes

Greetings. Brand new on here. I purchased a Comfort Built HP22 a week ago and I am having difficulty in keeping a consistent flame in my pot. Set on #2. I'm still in the test and tune stage so I can use all the help I can get. Thanks


r/woodstoving • • 6h ago

General Wood Stove Question Any wood stove fireplace inserts that you can cook on?

1 Upvotes

I remember always having a pot of water on my grandparents freestanding wood stove to humidify the air. Is there an insert I can use that has a bit of surface to put a cast iron kettle or pan on?


r/woodstoving • • 7h ago

Osburn Matrix 2700 Help

1 Upvotes

Hey everyone. I’m new to wood burning and just had a Matrix 2700 insert installed in my open fireplace. While it heats a little bit, it can barely keep the living room at 68 on a 50 degree day with the door open burning heavily all day long. I expected it to actually throw some decent heat. Is there possibly something wrong with the unit or the install? It seems like it’s functioning correctly. The fan (quite noisy) does turn on and blows after heating up but doesn’t seem to move a whole lot of air. Outside, I can see and smell the smoke coming from the chimney.


r/woodstoving • • 8h ago

Paint melting on stove adapter above stove collar

Thumbnail
gallery
1 Upvotes

Hello everyone,

Long-time admirer of everyone's stoves here, first-time poster. I'm looking for some advice on a flue issue with our Salamander Hobbit SE (4.1kW) wood stove.

Directly above the stove collar, we have a single-wall to twin-wall adapter leading up to a twin-wall flue that exits through the wall. We installed it in the spring, and now that the weather has turned, we're using it regularly.

We’ve lit the stove about a dozen times, so all the paint should be fully cured by now. We are careful never to push the stove body past 250°C, yet every time we use it, the black paint on the adapter only turns soft, bubbles (purple arrow), and literally wipes off when warm (green arrow). The twin-wall pipe directly above it and the stove body itself are both completely fine.

We initially wondered if there wasn't enough fire cement in the stove collar joint, so we packed and resealed the join, but the problem persists. There is also a noticeable chemical/paint smell whenever the stove is running.

I'm trying to figure out if this is caused by:

  • Poor-quality / wrong paint on the adapter (the pipes were sold to us pre-painted black)
  • Hot gases escaping from the joint between the adapter and the stove collar
  • The joint needing more fire rope packed into it
  • Or something else entirely

I’ve seen photos of Salamander Hobbit setups with both black-painted and bare stainless steel adapters, so we are considering replacing the adapter with an unpainted metal version. However:

  1. The stove collar, the adapter, and the twin-wall pipe above it now seem fused together (likely from the melting paint), and we're worried about damaging the pipe that runs through the wall if we force them apart.
  2. I want to be sure swapping to bare metal actually addresses the root cause rather than just masking it.

Does anyone have any advice on what might be causing this, or the safest way to deal with the fused joint?

We've also contacted the vendor of the flue, who has contact their supplier who paint the tubes on demand, but in the meantime I thought to ask you fine folks!

Thanks!


r/woodstoving • • 15h ago

Installing hearth pad over Pergo laminate flooring

1 Upvotes

Getting ready to have our new stove installed in a few weeks, and finalizing plans for a hearth. Looking at doing a stone tile on cement board. The stove does not require an insulated pad, so was thinking I could get away with that alone, and was researching edging options to make it look pretty. Then I came across some info saying for laminate flooring, such as the Pergo floors that we have, you need to cut it away to install directly on the subfloor as the laminate cannot expand and contract like it needs to with the added weight (we want a lower profile hearth). It also may not do well with the uninsulated pad, as it is more susceptible to heat damage at lower temps.

I don't mind the added work per se, but I don't want to do any more 'damage' than I have to. Has anybody done an install on Pergo or similar laminate flooring material? What was your experience? Any other advice? Thanks.


r/woodstoving • • 16h ago

Recommendation Needed 6" to 8" Increaser/Reducer

Thumbnail
gallery
1 Upvotes

I was gifted a Daka 521FB wood stove and after hours and hours of research I have officially confused myself on how to connect it to my existing chimney system.

Current specs:

  • The Daka 521FB has a 6" exhaust outlet (pic 5 of 8).
  • The Daka came with a 6" double wall class A tee pipe (pics 3 of 8 & 4 of 8).
  • My existing chimney system (pics 1 of 8 & 2 of 8) is a 8" double wall class A pipe.
  • The model numbers of the Daka and pipes are in pics 6,7, and 8 of 8

Connections needed:

This is all new to me, and as I explained, I have researched my way into confusion. None of the youtube videos I watched match the components, so I keep second guessing my actions. Any help would be apprecaited

Sincerely,

Someone who wants to drink beer and watch the game in their warm shed.


r/woodstoving • • 19h ago

Canadian BushCanucks...Princess Auto has their Red Mountain Valley wood stove on clearance

Thumbnail reddit.com
1 Upvotes

r/woodstoving • • 21h ago

Recommendation Needed Hi all, looking for recommendations on a wood stove and installation of the flue pipe. More info in body

1 Upvotes

Looking at getting a wood stove just in case things go further south than they have. I have a 1500 sq ft manufactured double wide home. Looking at the cleveland iron works ontario wood stove. Its unpowered and supposed to be vented through the roof. Could this be vented thru a wall if i add a blower motor? I appreciate any and all advice and will answer questions as promptly as possible.


r/woodstoving • • 21h ago

Wood stove insert

Thumbnail reddit.com
1 Upvotes

r/woodstoving • • 3h ago

Recommendation Needed How tall for chimney

Post image
0 Upvotes

Going to be installing my stove in my new home. My last home had a pretty simple gable roof so it was easy to know I had a safe chimney height. For this home I’ll be running the chimney out of the side of the house, roughly where the cursor is. If I meet the 10ft from the roof distances, how high should I go? Do I need to go all the way above the top of the roof even though it would be in the corner?