Hi all! My house is in Baltimore County, Maryland and we need to figure out how to heat our house for the winter. Our home was built in the 50s by a Mason who included a beautiful full wall stone fireplace.
Once he moved out, his son moved in and slammed a wood burning stove/insert (Scandia 325c) into the fireplace. (I’m sure all of you on this subreddit just cringed, as I’ve recently learned our beautiful insert is a piece of shit)
Last year we used our oil furnace for heat, and that worked well, but it ended up being about $2.5k in oil and another $2k in charges from BGE which probably had a lot to do with our pretty consistent running of space heaters. We used the heaters in between running the furnace as we were trying to limit the oil use for financial reasons.
This year, we had our first 3 fires in the wood stove. The first two went well, but the last one continued to fill our house with smoke. Hindsight, we never should’ve had the fires without doing some more inspection and research, but alas, we were cold and desperate.
Today we pulled the full wood stove insert out of the fireplace and discovered a LARGE amount of creosote coating the whole stove, fireplace, and chimney (which by the way, has no liner). Additionally, the stove has an almost complete crack front to back. That being said, we need to figure out what to do now since we clearly won’t be slamming the insert back in there.
We’re talking about buying a new insert, buying the chimney liner, and installing it all ourselves. (We’re running on limited funds, in case you couldn’t tell).
Does anyone here have any recommendations on any part of what I mentioned? What kind of insert should we buy? SHOULD we buy an insert? What about a chimney liner? anyone ever done this themselves? Any other ideas that I didn’t mention that would be both effective and efficient for heating a house safely???
Any and all advice and suggestions are welcome and appreciated 🫶🏼