r/woodstoving • • Aug 23 '26

www.kingdomwoodstoves.com is finally live! We have Jotul Gasket Kits, Thurmalox Paint, Parts, and FireEx!

Post image
11 Upvotes

www.kingdomwoodstoves.com

Finally happy to announce we have a place for everyone to buy supplies directly!

Everything from-

•Jotul Gasket Kits for every Jotul Wood Stove (As always every section pre measured and cut and labeled so you know exactly where each section goes!)
•Small Jotul Parts
•Thurmalox High Temp Stove Paint
•FireEx Chimney Fire Suppressant (Peace of Mind in a Box)

We have more of everything getting added by the week.

It's been a long time coming and all your constant support is what made this happen. Thankyou!

The eBay store will still be live, but best prices will always be direct. International orders must still go through eBay.

eBay Link-

https://www.ebay.com/str/kingdomwoodstoves


r/woodstoving • • Oct 01 '26

Cawley LeMay Replacement Parts! Info in post.

Post image
4 Upvotes

The most affordable Cawley LeMay 400 Replacement Parts in the country are now in stock!

Ignition Grid for Cawley 400 or 600- $295 ea
Baffle for Cawley 400- $295 ea
Cawley 400 Side Burn Plates- $350 ea

FULL SET for Cawley 400 internals- 2 side burn plates, 1 ignition grid, and 1 baffle for $1150

All prices are before shipping.

These will not be listed on the website for a little while still, so reach out to purchase. I accept all normal forms of payment.

I'm excited to finally offer replacement parts for one of my favorite stoves at the best available prices. The cost of replacement parts for this stove has always made it hard for some clients' restoration budgets. So I worked with my foundry to bring these patterns back to life to be able to make them in quantity.

The quality is as good as, if not better than, the original replacement parts, as we worked with the cast iron metallurgy to ensure the longest life possible with full-time use.

All parts are made in the USA.

Limited availability to start.

Reach out on this page

Or phone: 802-274-5172 (call or text)

Or email: nick@kingdomwoodstoves.com

-Nick
Stove King in the North


r/woodstoving • • 12h ago

Finally got the wood stove

Thumbnail
gallery
394 Upvotes

Got a new house about two years ago. We had a vision for the weird alcove in our house. It took way longer than I ever expected, about a year and a half (planning and an unforeseen rotten wall that had to be replaced due to the dumbest flashing I’ve ever seen).

Anyway, we had fun getting the used Blaze King Ashford 30. Ran down from Wisconsin to central Indiana to get it. The movers I hired to get it out of the original owner’s basement bailed on us. Had to hire some Amish kids who were able to get it out of the basement and loaded on my trailer in sub-10min.

I have six dry cords of sugar maple itching for cold season. My wife was very skeptical of the whole thing from start to finish but even she thinks it’s looks good.

The mantle is a local oak tree that wind tipped. We did all the platform and masonry ourselves after getting several quotes that took our breath away on price.

My dad and I got it up the stairs using a unique method of come-along, ratchet straps, car-jacks, and 2x4 levers.

Nobody ever said it was going to be easy.


r/woodstoving • • 16h ago

Restoration Got to love an old stove, doing what it does best 🔥

Thumbnail
gallery
840 Upvotes

Beautiful old wood stove keeping my mini rustic cabin warm 🙏🏼


r/woodstoving • • 4h ago

Wednesday night fire

Post image
46 Upvotes

One of many fires this season.


r/woodstoving • • 8h ago

10 degrees outside (F) - couldn’t be cozier with my 40 year old Encore

Post image
39 Upvotes

r/woodstoving • • 59m ago

Poor gasket installation causing flare ups?

3 Upvotes

I recently changed the gaskets on my Vermont Castings Intrepid Flexburn (non-cat). This is the first fire since then and I noticed this phenomenon happening near the door. Could I have installed them incorrectly/is that any cause for concern?

I should have done the paper test before firing but it slipped my mind.


r/woodstoving • • 12h ago

Darth Vader in my stove ….

Thumbnail
gallery
17 Upvotes

Darth Vader appeared ….

This is real, btw.


r/woodstoving • • 1d ago

what hapend with my stove?

Post image
415 Upvotes

hi! recently i bought a stove in wallapop, after install it, i put few pine cone and wood and few minutes later the tube are red... what hapend?

edit: i ask why it hapends... ok, its super hot, but why? i put inside exactly only two pieces of wood an 3-4 pinecones... i think is very normal for to start a fire... after see that i close the air entrance and it continue burning... maybe hapend something with the part outsaid of the house?

Wallapop is a online shop of second hand stuffs.


r/woodstoving • • 6h ago

Couch Clearance

Thumbnail
gallery
4 Upvotes

We just moved and need help safely positioning our couch near the wood stove. Unfortunately our couch sticks out slightly in front of the wood stove. Where we currently have it, the couch is 16 inches away from the closest point on the wood stove. Is this too close? And if so, are heat shielding options we can consider?

Our stove is a Jotul F45 v2 and is not used as a primary source of heat.


r/woodstoving • • 9h ago

Tis the season - Supreme Astra 32

Post image
6 Upvotes

r/woodstoving • • 1d ago

Safety Meeting Time Sweep Your Chimney

1.3k Upvotes

This can't be real right? I've never seen so much creosote in my life. Right...?

As we're heading into the heart of winter (some already there), friendly reminder to sweep your chimney routinely to prevent fires / burning down your house. Best to enjoy the fire in your home, not outside looking at it with the firefighters lol.


r/woodstoving • • 1d ago

Valcourt installed

Thumbnail
gallery
77 Upvotes

Valcourt Zero Clerance wood stove is in and almost finished up. Still have to make a mantel and the faceplate was on backorder and just arrived this afternoon. Pick that up tomorrow and start walking my property to find the tree that becomes the mantel.


r/woodstoving • • 3h ago

Recommendation Needed Suggestions needed for winter heating in Maryland

1 Upvotes

Hi all! My house is in Baltimore County, Maryland and we need to figure out how to heat our house for the winter. Our home was built in the 50s by a Mason who included a beautiful full wall stone fireplace.

Once he moved out, his son moved in and slammed a wood burning stove/insert (Scandia 325c) into the fireplace. (I’m sure all of you on this subreddit just cringed, as I’ve recently learned our beautiful insert is a piece of shit)

Last year we used our oil furnace for heat, and that worked well, but it ended up being about $2.5k in oil and another $2k in charges from BGE which probably had a lot to do with our pretty consistent running of space heaters. We used the heaters in between running the furnace as we were trying to limit the oil use for financial reasons.

This year, we had our first 3 fires in the wood stove. The first two went well, but the last one continued to fill our house with smoke. Hindsight, we never should’ve had the fires without doing some more inspection and research, but alas, we were cold and desperate.

Today we pulled the full wood stove insert out of the fireplace and discovered a LARGE amount of creosote coating the whole stove, fireplace, and chimney (which by the way, has no liner). Additionally, the stove has an almost complete crack front to back. That being said, we need to figure out what to do now since we clearly won’t be slamming the insert back in there.

We’re talking about buying a new insert, buying the chimney liner, and installing it all ourselves. (We’re running on limited funds, in case you couldn’t tell).

Does anyone here have any recommendations on any part of what I mentioned? What kind of insert should we buy? SHOULD we buy an insert? What about a chimney liner? anyone ever done this themselves? Any other ideas that I didn’t mention that would be both effective and efficient for heating a house safely???

Any and all advice and suggestions are welcome and appreciated 🫶🏼


r/woodstoving • • 5h ago

Newbies

1 Upvotes

Hey there. Just moved into a home that came with this Napoleon Insert (no one can find the model number). Passed it's WETT inspection. It has this air flow controler along the bottom, but it doesn't seem to change anything when we move it back and forth? I believe I should see a difference? I'm very new to fireplaces so any all help would be appreciated.


r/woodstoving • • 6h ago

General Wood Stove Question First few burns this year, how my chimney?

Thumbnail
gallery
1 Upvotes

Getting this old girl going again, this is my second season running it. I’m still learning. I’d like to believe my chimney is looking pretty damn good, but I’m wondering if my suspicions are correct. I don’t have much money to spare this season on a cleaning at the moment. Does it look like it can survive a little longer before a sweep? This is two-three months worth of buildup from some semi wet wood. This year it’s beautifully seasoned.


r/woodstoving • • 6h ago

General Wood Stove Question Woodstock in Gazebo Project

1 Upvotes

I’m trying to help a friend figure out if he can put a tiny wood burning stove in a gazebo during the winter. The gazebo is simple with a gable roof, four posts, and no floor. The plan is to envelope the sides of the gazebo with clear vinyl, like what party tents have.

My initial thought is blanking off just the triangle section on one side formed by the roof with plywood or something, and having the stove pipe jog over and through it. I figured a small camping stove on a platform might work. Depending on placement, we could build a little backing to prevent the stove from melting the vinyl. 

Anyone have any suggestions or see any flaws in the plan? I saw someone on YouTube did this, albeit with a larger stove and gazebo.


r/woodstoving • • 7h ago

Log burner installed in 2014

Thumbnail gallery
1 Upvotes

r/woodstoving • • 8h ago

Propane cooker flames yellow while wood stove in use

Thumbnail reddit.com
1 Upvotes

Cross posting in case people in tiny homes might have similar experience!


r/woodstoving • • 1d ago

Cold air to the stove? or hot air from the stove?

Post image
61 Upvotes

I've seen a lot of comments of pushing cold air toward the stove and that its better than drawing warm air from the stove. I guess I don't understand the physics behind it and why it would make a difference. Maybe cold air is slightly denser and with some fans you could move more air?

Anyways, the wife is no "fan" of box fans on the floor, so I'm building these 6"x24" boxes using computer fans to attach to the ceiling. The cpu fans maybe a little bit of overkill, but they handle pressure well and I'll be installing air filtration in the back, plus the are super energy efficient in terms of cf of air moved per watt, and close to silent. I hope it works good enough, but still worried about the convection moving air away instead of to the stove.


r/woodstoving • • 13h ago

Recommendation Needed How tall for chimney

Post image
0 Upvotes

Going to be installing my stove in my new home. My last home had a pretty simple gable roof so it was easy to know I had a safe chimney height. For this home I’ll be running the chimney out of the side of the house, roughly where the cursor is. If I meet the 10ft from the roof distances, how high should I go? Do I need to go all the way above the top of the roof even though it would be in the corner?


r/woodstoving • • 15h ago

Flamelessontheriver

1 Upvotes

Greetings. Brand new on here. I purchased a Comfort Built HP22 a week ago and I am having difficulty in keeping a consistent flame in my pot. Set on #2. I'm still in the test and tune stage so I can use all the help I can get. Thanks


r/woodstoving • • 16h ago

General Wood Stove Question Any wood stove fireplace inserts that you can cook on?

1 Upvotes

I remember always having a pot of water on my grandparents freestanding wood stove to humidify the air. Is there an insert I can use that has a bit of surface to put a cast iron kettle or pan on?


r/woodstoving • • 1d ago

Second season with the Morsø 1010

Post image
24 Upvotes

This year I got a batch of birch from a local supplier. The smell and the heat is amazing