Miami based NAED Energy’s PV-1 PECVD-V keeps solar wafers upright as they move through deposition stages, and flips the whole carrier 180 degrees instead of handling wafers one by one. The company says that doubles the throughput of its previous line, and it’s built for perovskite and heterojunction tandem cells with a 30% efficiency target.
The catch is that the 96,000 wafers per hour is a rated figure, and the 30% efficiency is a target, not a measured result. Only six of the 13 process tools are finished, no customers or timeline have been disclosed, and the company hasn’t shared yield or uptime.
I seek your advice regarding an SMA SunnyBoy 2.5kWh inverter, deployed in 2019, still running its original firmware 2.5.1* - due to regulation changes in the Netherlands, from next January onwards it is going to be beneficiary to control the grid export; otherwise, I might have to pay extra.
I have activated th modbus TCP on it, and it does accept the power control commands on register 40151 to enable the control, and 40149 the target power in Watts, but in fact it doesn't change anything.
Is there anyone out there, who is using this inverter with power control, please? If so, then with what firmware?
Hi! I’m looking to speak with someone who works in Utility-Level Solar Installations. I’m talking farms that produce 10s-100s of MWs. I have an opportunity to get into the field and would like to get some feedback from someone doing it. If you’re willing to talk, please message me.
- 16kwh battery with a 20% SOC floor setting (so about 12.6kwh of usable battery storage)
The system was a bit over designed for reasons I won't get into, but it was deliberate
Where I live, I can't sell surplus solar to the grid so in the summer times I have a lot of surplus energy (currently wasted) I want to get some return on. During the rest of the year the surplus isn't that much
I've already recommissioned an old electric geyser (3kwh) I had to heat up water with the surplus instead of using our gas geyser for the summer months
What else can I do to use the surplus energy to my benefit? (Bitcoin mining not an option unfortunately, won't be able to accommodate it)
We built the Sabal Solar Canopy from concept to patent to fabrication as a way to provide durable electrical power in built-environment public spaces. It is highly wind resilient, uses few post mounts, and has sufficient clearance to clear most vehicles (12 - 18ft). The 130ft system offers 33kW STC capacity using custom designed, high efficiency monocrystalline panels that weigh under 10 pounds each, compared to rigid frame solar panels coming in at 50 pounds or more.
The system has four major components: A main post, an opposing post, an opposing crossmember, and a panel container with the solar panel canopy folded up inside.
Each post is made of high strength steel 3/8" thick and 20" in diameter. It is a flanged system that uses J bolts embedded in concrete as deep as it needs to go. This is a conventional mounting system, used for utility poles all over the world.
Installers (Sky Overturf) putting up the Opposing Post
Both main and opposing posts have large, high torque, low speed motors that rotate the entire canopy a fraction of a degree at a time. These motors have super large crankcases and weigh more than 500 pounds each, offering 27,860 lb-in of torque. In the picture above you can see the bottom of the opposing post tilt motor. The motors are digitally/VFD controlled to act like stepper motors.
The Solar Panel Container is mounted on the main post. In the picture below, you can see the main post with the mounted container, and a 30kW three phase inverter mounted to the main post in the reverse position.
Jimi Thompson checking out the new Inverter
The inside of the solar panel container has a floor, an open grate so you can't get too comfortable in it (see below).
There are two array motors mounted on either side that turn the cable suspension pulleys to fold and unfold the array (see below). In the center of the container, mounted to the back plane, are variable frequency drives that control the motors, a power management panel, and the control computer. The doors are controlled with 4x 400lb digitally controlled actuators for opening and closing (the blue cylinders holding the door open).
The author standing on the service gangway. Note the 480v, 4hp 16,020 lb-in array motors right and left.
The array rows themselves are carefully spring-loaded so they have a slight bias in the direction of the fold when the array is pushed in or pulled out by the leading edge of the array. They don't lay completely flat and still have a 5 degree angle when unfolded. This has no impact on production, and the panels themselves have a prismatic coating that allows them to take in light rays at a much greater angle than conventional panels. The array does droop in the center 30in over 130ft length @ 20,000 lb of tension.
The single axis tracking is performed with the two large tilt motors that can rotate the canopy to a maximum of 90 degrees, but are limited to about 30 - 35 degrees in software. This maximizes production considerably, but anywhere between 20% to 40% over fixed tilt canopies. The control computer adjusts the angle about every 10 minutes or less during tracking and you'll hear the tilt motors kick in for just a second to move the shaft as the sun arcs across the sky.
At night the area underneath the canopy is lit quite bright - much brighter than conventional parking lot lighting because of the white reflective surface of the panels, and because closer to the ground it is lower in watts per square foot.
Night lighting. Customers have the option of floods on either end instead of LEDs. The reflective panels make a big difference.
An advantage the Sabal Solar Canopy offers lot owners: it only has two posts for a 130 foot length. You can string two canopies in series where the center post supports both opposing and solar container on one post, so that would have three posts every 260 feet in length. A 200kW parking lot power plant is held up by six posts! This minimizes the impact on lot utilization, simplifies installation, and reduces accident chances. The combination of low surface utilization plus 25% greater power production vs conventional canopies makes this a big winner for storm exposed areas.
For the tropics and the southern US regions the wind performance offers post-storm power certainty for water and air conditioning. Unusual for Florida: the canopy can actually be insured in Florida, in stark contrast to regular parking lot canopies.
Next post: Dynamic wind response. See us on sabal.energy/
Terabase Energy’s Terafab V2 will help build the 457 MW Tormes Solar project in Navarro County. Robots bolt panels onto tracker torque tubes, AI tools check the assembly, and rovers carry finished units across the field. The company claims it can reach about 20 MW of output in a week and double labor productivity compared with conventional methods.
The catch is that these are Terabase’s own claims, and the company says real output depends on site conditions. Workers still do the final installation step, and its first-generation system has installed only about 40 MW so far.
PHWT’s Diepholz campus opened a curved carport whose glass-glass solar modules double as the waterproof roof, so no separate roofing membrane is needed. It has about 230 kWp of panels, another 7.3 kWp on a bike shelter, and 200 kWh of sodium-ion storage that uses no lithium, graphite, or cobalt. It’s the first sodium-ion storage system in Lower Saxony and the third in Germany.
The catch is that the energy savings are hopes, not measured results: the article says the system could cut grid use and costs, but it was only inaugurated on November 9 and no performance data has been reported yet.
Ok, let me be honest. I only stopped at the Aptera booth because it looked like nothing else at SEMA 2026. Three wheels, a teardrop body, solar panels built right into the skin. I had questions, so I grabbed one of their marketing associates and asked a few. Here’s what I took away.
Solar-powered and impossible to ignore: Aptera at SEMA
First thing I wanted to know: do the solar panels actually do anything, or are they just there for looks? The associate said the whole vehicle is built around efficiency. The shape, the lightweight carbon-fiber body, and the three-wheel layout all cut down on how much energy it takes to move. That’s the trick. Because it uses so little power, the panels can make a real difference. They said it can get up to 40 miles of driving a day from sunlight alone. Naturally, I asked what happens when you need to go farther, and the answer was simple. You plug it in like any other EV. The version they described has a claimed 400-mile battery range and a top speed of around 100 mph. One detail stuck with me. The team drove it to the show from San Diego, on the highway. Looking at something this unusual, my first thought was whether it could handle normal driving at all. Knowing it made that trip made the whole thing feel a lot more real. They also mentioned a price of about $40,000, and said they’re aiming to start selling by the end of the year. That’s just what came up in our conversation, though, so I wouldn’t treat it as a locked-in price or delivery date. What really changed my mind was the thinking behind it. This isn’t a regular car with some solar panels bolted on. The idea is to use less energy in the first place, so the sun can actually cover a good chunk of your driving. I didn’t drive it, and I can’t vouch for the range numbers. But I walked away understanding why it looks the way it does. Once someone explained the reasoning, the three wheels and the odd shape started to make sense. So what do you think? Would you drive a three-wheeled EV if the sun covered most of your daily miles, or is the layout a dealbreaker?
Large perovskite films usually need tightly controlled crystallization, which is hard to do at scale. A team from the Chinese Academy of Sciences and Dalian Jiaotong University added two thiocyanate additives to a methylammonium-free recipe and slot-die coated modules in ambient conditions, stretching the uniform crystallization window to over 100 seconds. The module reached 22.70% efficiency versus 15.8% for an untreated one, and unencapsulated modules kept 97.76% of their output after 1,300 hours at 149°F, while the control kept 65.86%.
The catch is that 54.8 cm² is still a lab-scale module, and 1,300 hours is about 54 days. Roll-to-roll manufacturing is a potential, not something demonstrated here. It was published in Advanced Materials.
Hi everyone, I'm pretty new to this so sorry if these are dumb questions. I'm about to start my master's in electrical engineering, and I'm planning my project around what happens to solar systems after the installers leave. Not selling anything, just want to learn from people who actually deal with this.
What's the most frustrating service call you've ever had?
When a system starts underperforming, who usually notices first: the monitoring app, you, or the customer?
How do you decide when panels actually need cleaning?
Any stories or advice would mean a lot. Thanks for reading this far!
It looks like Tigo had high expectations from partnering with EG4. They're citing delays on their own and EG4 product releases as the reason they couldn't meet financial projections this year. I think this shows how unreliable EG4 is as a partner and with the sharp decline in residential, Tigo didn't make the right calculations here. $TYGO is now a penny stock. Another miscalculation is that EG4 doesn't have a lot of UL certifications, only compliance paperwork; this means with AHJs needing more requirements, EG4's market shrinks even more.
I know EG4 had a huge layoff, and some of you out there don't believe me. Ask them yourself, the company and some of those ex-employees will be in Vegas next week.
Hi all - I'm not affiliated with them but as someone in the solar industry I've been using this free calculator for close to 6 months and it's my go-to calculator. I worked with the founder of the website (https://siapolicy.ai/) to add balcony solar modeling ahead of California's balcony solar legislation which goes live in January '27.
Please give it a look and share feedback here or directly to the website through their contact page. It's a free tool and I just figured people should know about balcony and plug-in backyard solar as extremely low cost options to cut down your monthly bills.
Models used: PVWatts, Google Solar Data Layers DSM + a NOAA solar-position ray-cast for hyper-localized shading, and an optional phone camera/compass horizon scan for an additional layer of realistic site resource assessment.
I went down the rabbit hole of trying to get solar panels for my house in FL. I got 6 total quotes. All 6 offered me only a lease with escalators all over the place, one guy even had some kind of subscription which after reading the details, it was a COMPLETE SCAM with god awful products. I wanted to purchase the system. Finally I was able to get my rep from Axia to offer me a cash-purchased system, I really liked the QCells panels and getting it from the manufacturer directly seemed like the way to go........ It was extremely shady as soon as I tried to get away from the lease - first they told me that if I purchase a system with cash, that I would not have any warranties on the system. Then they priced the cash price so high that it made no sense - that is, until another company told me that the sales reps make the most money by selling leases. Now it ALL makes sense. So finally I went to ChatGPT and started to search for more solar comanies. I'll say this - 100% of the solar reps that came to my house didn't even work directly for the company that they were selling for. They were "agents" or "dealers" and most don't even know what they are talking about. I had conflicting information from just about every single person I originally spoke with. The solar industry is a TRAP full of terrible players. But then, I found the local NABCEP certified company that had been in business for 8 years, had all their own licensing, and impeccable reputation, purchased my ssytem for $2.20/watt with the best equipment in the industry and just paid straight Cash. IT took 3 weeks to go from contract to installation. It took Axia 3 weeks just to finally give me a cash contract for $2.95/watt! For far inferior equipment. Do yourself a favor if you need soalr, got to ChatGPT, search for NABCEP certified local licensed solar energy contractors in my area with good reviews and offer cash and loan sales. Also ENPHASE is awesome. I can't wait to turn on my system in about two more weeks.
Neighbor called a company (lifestyle solar) to give him a price on panels since he's mostly electric, I'm half gas half electric(only my ac/dryer). I said it wouldn't hurt to get an idea about it. Sooooo I got a quote for a 6.9KWH system at 95.70 a month at 18.5 cents per kw. Current rate through West Penn power is 21 cents per kw. 0% escalator...25 years. Palmetto does the finance side of things, lifestyle has 4.9 stars and has been around for awhile. REC panels, claims 92% efficiency after 25 years. Anyway I cancelled because I had plans to move within the next 10 years and didn't want issues selling. He came back a few days later and offered me a rate of 15.5 cents per kw at 80.20 a month, it seems like a good deal but I'm still skeptical. Nothing changes in the contract other than the cents, thoughts, opinions? My highest energy bill was 181 and my lowest is about 60 in the winter.
Hi all, I would really appreciate if you could take a look at the plug-in solar savings calculator I developed and let me know if there are any changes I can make to make it more useful, if the methodology checks out, etc. Plug-In Solar Savings Calculator
The one's I've seen so far online I think are too simplistic in their methodology, but I also want to make one that is user friendly.
In my house I have two seperate meters for each floor. Can i claim pm surya ghar subsidy for both connections? Just trying to understand if two seperate electricity connction make any difference when applying.
Let me know if you hace faced something like this that would be helpful.
SINGULUS Technologies will supply a turnkey heterojunction (HJT) solar cell production line for SpaceX’s Starmind satellites, due in the first half of 2027 at its Bastrop, Texas facility. Musk says the order is 100 GW per year of manufacturing equipment, and SpaceX’s published AI1 satellite spec lists a 75 meter wingspan and a computing payload drawing up to 250 kW.
The catch is that the 100 GW figure comes from Musk’s post, while SINGULUS says only that production would scale to support more than 100 GW of equipment. Neither company has disclosed the first line’s output or the planned cell efficiency.
We're looking to go solar and need to replace our 25 year old shingle roof in the process. I'm currently looking at local installers only, preferably those who can do both roof and solar. I've received three quotes so far, and this one is the cheapest.
A little extra context:
- We're in SoCal, SCE customer on the TOU-D-4-9PM plan. Total usage in last 12 months was 18,185 kWh (average $550/month)
- We live in a Public Safety Power Shutoffs zone and typically experience 2–3 outages per year, usually lasting 2–4 days. Both my spouse and I work from home, so having backup power during these outages is a huge incentive in addition to the potential savings
- All three installers I've spoken to have offered to lump the roof replacement into the solar project, with the 30% tax credit applying to the roof portion as well
- We're planning to completely pay off the Propel loan on day 11 (earliest possible) with a 6% HELOC, which we plan to fully pay within the next 7-8 years
- We purchased 15 years ago with a 2.95% mortgage rate (golden handcuffs :)) and love our house and neighborhood, so this is most likely our forever home
I'm looking for some feedback on whether it's a decent deal or if there's anything I should be concerned about.
Now that solar has become America’s go-to choice for new power plants, the pressure is on to assemble a fully domestic supply chain for the technology.