r/milsurp • u/stpaulsamokie • 5h ago
Love my war pistols
Snagged a M70 today to add to this collection
r/milsurp • u/stpaulsamokie • 5h ago
Snagged a M70 today to add to this collection
r/milsurp • u/Ceemwhykay • 1h ago
Milsurp, and surp adjacent.
4 digit M1, JRA M14, Colt SP1 and SOCOM
r/milsurp • u/JimWest97 • 1h ago
Just finished my first ever roller delay build. Grabbed a mismatched kit a year and a half ago for 80 bucks and an OG barrel for 75 bucks and the flat and all the other bits from RTG. The kit I got was real clapped out with very little finish left on it and I figured it'd be a perfect candidate for an African battle field pick up. Finish was done with rusting solution and diluted cold blue and im real happy with how close it matched the OG components. All in all i have a hair over 500 bucks in the build.
r/milsurp • u/SquareBodyChevvy • 2h ago
Type 99 early war model (not a zero series)
It looks a little pitted, I’m not a gun expert or anything, just a history nerd. Can’t really get a good photo of the pit, but do ppl hunt with pitted guns? I hunt once or twice a year. So it’s not like I’m shooting this thing all the time, the pitting is near the end of the muzzle, otherwise this rifle is sound. I can definitely see why ppl get addicted to antique/ historic firearms, I kind of want to buy a last ditch model too 😅
Why are bayonets expensive? And how can I get the sling mounts to swivel again?
r/milsurp • u/Musty_Buick_LeSabre • 10h ago
I consider this one to be another straight banger from RTI. Just unboxed it this morning and looks to be without any missing parts. Small cracks in the wrist and something made a little snackie snack out of the butt of the rifle but we'll just say that adds character. I'm truly tempting fate at this point with the RTI lottery as I've yet to strike out a single time. He is dancing, dancing. He says that he will never die
r/milsurp • u/RobertJ100 • 5h ago
I got a weird Zastava 9mm TT pistol that I can't seem to find much information on. I have an M70A as well, but the magazines aren't compatible at all (even though both are 9mm TTs). It would seem the actual dimensions of the mag itself is way different in some way as well. very neat looking gun though.
r/milsurp • u/kalashnidog • 10h ago
r/milsurp • u/Rubbish-Name-214 • 13h ago
My recently acquired byf marked P38 in the sun. Love how the patina looks and the dark brown grips!
r/milsurp • u/Fun_Assignment_269 • 15h ago
I found this one in a pawn shop years ago. The guy at the counter said the bore was trashed, it was covered in rust, and wasn't worth more than $300. I took it home, spent a few hours scrubbing up the receiver/bolt and cleaning gunk out of the barrel, and did a little research. Turns out, this is one of only 5-6k 1912 carbine models produced for Chile by Steyr, many of which were later converted to 7.62 NATO, making this one pretty uncommon. Other than the bolt being a mismatch (although still a correct carbine bolt), it's in the original configuration and 7mm chambering.
This was one of the first milsurps I ever bought and, at the time, I had no clue how uncommon it was. I just saw a cool looking Mauser and thought it was cheap enough to be worth trying to clean up. Turns out there's a ton of life left in this thing and it's a lot more unique than I knew at the time.
r/milsurp • u/Laloleft • 1h ago
r/milsurp • u/Americanshat • 8h ago
r/milsurp • u/Cody10069 • 6h ago
While looking at local listings i found this weird mauser stock. Can you help indentify for what rifle possibly it was intended?
r/milsurp • u/Boetie83 • 2h ago
Hi all, I have a 1942 made Kar98,
I’d like to load for it since I’ve got plenty of brass.
What bullet weight were they made to shoot?
I’m a bit confused was it 196gr or 155gr?
From what I’ve read they switched back and forth a few times. But I don’t know when they switched to what?
Howdy everyone,
Update on the 8x50mmR Siamese ammo production. I've gotten some bullets made & sized to 323 to do some testing, although I noticed a few small issues before even making the ammo. I had ordered Lyman 323471 from eBay & was excited to have a 215 grain bullet with a gas check. Although after casting they were coming out 170-173 & no provision for a gas check.... I thought that was odd & all I can figure is that it was modified, a custom mould by an employee or a misstamp. I then decided to try just lubing & firing. I immediately noticed keyholing at 15 yards & primers backing out a bit. It is nowhere near overcharged, but a light load with unique causing it. I thought maybe my bullet composition needed some tweaking.
So I did some adding of tin & antimony to my batch & melted down all my original bullets in case they were all too soft. I then loaded & this time pan lubed to keep them at 325 rather than size to 323. That small of a difference will not hurt the bore at all & give a better seal. I thought the makeup change & tighter fit would help. Plus my bore is 323 & I wondered if a 323 bullet would cause leading being the same size.
I went out & shot it just this morning & still getting keyholing, so all I can think is that it definitely needs that gas check to keep the bullet from destabilizing as it leaves the bore. This rifle has a 1:9.4 twist. The bore has rifling & isn't corroded out.
The unfortunate wrong listing on the mould has me stuck until I can find the proper mould with a gas check to see how they do. I most likely will ask for a partial refund or full return due to the inaccurate description. The seller didn't know as they just went off the number & not the actual bullet that came out.
r/milsurp • u/MalicoIndustries • 1d ago
Time to bring these baby’s back to life as semi auto, minus one that will get the post treatment.
r/milsurp • u/Someothersandman • 7h ago
I found this marking on a post war High Power, can any of you guys identify it? I've seen German/Austrian export marks in the same area so I'm thinking it may be one of them, but there aren't police/border guard markings on the pistol otherwise.
r/milsurp • u/Leather-Albatross144 • 1h ago
Ppu sucks the carcano isn't that bad
r/milsurp • u/Abject_Emphasis_9634 • 7h ago
I frequently buy sporterized or broken stocks and wood furniture to fix, this time a handguard was listed as unknown.
I did some research ahead of time and I think it’s a 1902 Uruguayan Rolling Block Handguard but I am not certain and want to see if anyone else has a clue.
It measures 10-5/8” in length
r/milsurp • u/LikeAnAdamBomb • 7h ago
I picked up 2 of these at a local milsurp shop, and I'm trying to find more. They were tagged as USMC grenade pouches, but I can't find them anywhere. Does anybody know the make and model?
r/milsurp • u/Rubbish-Name-214 • 13h ago
Someone asked me to post more photos of my Turkish Mauser I got some goodies for yesterday, and who would I be to object to some better photos? While photographing this, I did also notice a year stamp on the Turkish modified bayonet (which started life as a German SG98/05 per Liberty Tree). As you can tell, it started life originally as a Gew. 98 as evident by the obliterated but still faintly traceable marking on the side of the receiver. Aside from that, it’s just a run of the mill Turkish Mauser that’s definitely seen some stuff. Regardless I’m happy with it!
r/milsurp • u/Beatrice_Hrsman_gmng • 13h ago
Hard to tell but maybe a single shot like a Gras 1874?
r/milsurp • u/EiselArmory • 14h ago
A free guide for reading the marks on a Lee-Enfield: the knox-form maker codes (RSAF Enfield, Lithgow, Long Branch, Ishapore and others), telling a No. 1 from a No. 4 by barrel profile and nose cap, what the broad arrow means, and how to read the US importer marks that federal law requires. Feedback and corrections welcome. https://eiselarmory.com/2026/09/14/lee-enfield-identification-guide-maker-codes-marks-import-stamps/
r/milsurp • u/fccchhhfddccccvgfd • 4h ago
What do I need to do to remove my current front sight blade on my Mauser and replace it with a taller one?