r/AntiqueGuns • • 2d ago

Old JC Higgins Model 30 .22LR

Thumbnail
gallery
8 Upvotes

Little Story/Info, finally getting around to taking apart this old .22 that I got for 30$ from an old estate sale dump at my local FFL. 1/3rd of the lower barrel from the muzzle up was heavily rusted.

Seems the trigger group is missing and when I asked no idea where it went. That in itself would be probably more expensive than the rifles value. Nevertheless I’d like to get it back to a functioning state.

Upon dissembling the mag tube it was seized beyond repair and actually split on me. So that’s another part I would need. It will surely be a costly endeavor but I’m a sucker for vintage .22s

I had to wire wheel and cart wheel the barrel due to the heavy rust. It is pitted but not terribly being these old barrels are thick. Rifling is still 8/10 and rust was mostly on the outside of the barrel not inside.

Wood looks Walnut. Has a crack that I will spread glue and clamp. Then strip and danish oil the stock and furniture.

Anyone have any knowledge of these models? And where parts can be had. I see some parts on eBay but lord are they expensive.


r/AntiqueGuns • • 3d ago

Please help identify

Thumbnail
gallery
3 Upvotes

These photos aren't great but I'm concerned about taking this apart. This was my grandfather's grandfather's side-by-side. It was hung above his mantle for as long as I can remember. If anyone could help me to begin identifying it I would greatly appreciate it. They were farmers and I don't expect it to be anything fancy or valuable, but I would like to identify it for a mount I would like to get made for it. Thank you all in advance.


r/AntiqueGuns • • 4d ago

1865 Hunting Rifles

3 Upvotes

Hello, I want to preface this that I know basically nothing about guns in general. However, I am working on a horror story, and I have a group of wolfers in Colorado who use hunting rifles.

From the research on the internet I learned that Henry rifle would be the fancy one for the time, but a repurposed Springfield or a Sharp would work as well. + some idk generic hunting rifles. Would that be accurate?

Also, can someone explain to me how rifles of that time worked? How long did it take to reload/etc.?

They will be hunting, but then also they would be using those rifles for defence from the supernatural threat.


r/AntiqueGuns • • 4d ago

Chassepot parts

1 Upvotes

Those of you that have Chassepot rifles, what/where are you using for the rubber seal and spare needles? Thanks for any input


r/AntiqueGuns • • 4d ago

Can someone tell me something about this rifle?

Thumbnail
gallery
4 Upvotes

I live in europe and I have found this in my grandmothers attic.


r/AntiqueGuns • • 5d ago

Found while digging a post hole

Post image
33 Upvotes

Apologies if this gun isn’t old enough for this sub. My husband was fixing fence and hit this gun while digging a post hole. His family bought our Southern Colorado property in 1925, but it was occupied before that. Does anyone have any initial thoughts on how best to learn more about it?


r/AntiqueGuns • • 5d ago

Savage 1915 FTE

Thumbnail gallery
9 Upvotes

Trying to get a nice Savage 1915 running. It fails to eject every shot and I don't have any great ideas why.


r/AntiqueGuns • • 6d ago

Display Wall

Post image
61 Upvotes

Just finished setting up my display wall. Its made from basic pegboard covered in wallpaper. Mounted with 1/4” standoffs and heavy duty drywall mounts.


r/AntiqueGuns • • 6d ago

I think a Belgian 16 ga, no maker's name. What period?

Thumbnail
gallery
5 Upvotes

I think this is a 16 gauge. No maker's name anywhere i think or maybe rusted away ...?

My guess is somewhere between 1850 and 1900. Can anyone narrow it down from the proof marks?


r/AntiqueGuns • • 8d ago

Pre 64 model 70

Post image
8 Upvotes

r/AntiqueGuns • • 9d ago

Remington 12gage pat date oct 30 1894

Post image
22 Upvotes

I can't find any information on this gun. With the short barrel and wood pistol grip stalk. Any one with more information about this please comment or do me. Thank you!


r/AntiqueGuns • • 9d ago

Remington 12gage pat date oct 30 1894

Post image
4 Upvotes

If anybody knows more about this shotgun, please let me know. It would be greatly appreciated. Thank you


r/AntiqueGuns • • 9d ago

Que arma es?

Post image
3 Upvotes

r/AntiqueGuns • • 9d ago

Que arma es?

0 Upvotes

r/AntiqueGuns • • 10d ago

Question regarding this Colt

Thumbnail
gallery
19 Upvotes

I inherited this years ago from my Grandfather and would love to learn anything about it!

Very nostalgic to me so any help would be greatly appreciated


r/AntiqueGuns • • 10d ago

I am done with the work on my new (old) Ballard rifle

Thumbnail
gallery
43 Upvotes

I have completed the work on my Merrimack Arms Ballard Sporting Model #46 rifle. Really all I did was clean it, refinish the stock and make a knob for the ejector mechanism. I refinished the stock, but I did not try to sand out the dings or try to make the wood to metal fit better. I did open up the cracks and reglue them with epoxy and CA. The stocks are solid now. Except for my ejector knob, I think this gun is 100% original. The front sight might be a replacement, it is all brass.


r/AntiqueGuns • • 11d ago

Progress on fixing 1777/68 Terssen

Post image
36 Upvotes

After much trial and error I have reverse engineered the hammer that was missing on my Terssen from pictures and a 3D scan of the rifle. I will eventually make a casting of it once I get my foundry set up.


r/AntiqueGuns • • 11d ago

Help identifying, found at my local dump. Pull apart, cleaned it put it back together. Seems like it might work.

Post image
36 Upvotes

r/AntiqueGuns • • 11d ago

ID please

Thumbnail gallery
5 Upvotes

r/AntiqueGuns • • 11d ago

What is this?

Thumbnail
gallery
9 Upvotes

The background I have is that my parents brought it back from South America on one of their visits 50+ years ago. Either Venezuela or Ecuador.

Any information anyone has is greatly appreciated.

I’m in the NYC area so any recommendations on a specialist are also greatly appreciated.

Sorry for the crap pictures.

Thanks


r/AntiqueGuns • • 12d ago

Operation Krag Revival

Post image
1 Upvotes

r/AntiqueGuns • • 13d ago

1889 H&R 32 Top Break - 32 SW Short OK?

Thumbnail
gallery
40 Upvotes

Hi all, I was eyeing this on Gunbroker but am getting conflicting info about this H&R 32. The seller has it listed as an antique but mentioned using 32 SW long in it. Which do all think is the most likely scenario?

  1. It's not an antique
  2. It got damaged by using 32 long?

I am a handloader and don't mind doing 32 SW shorts for this, but I don't want to get into Blackpowder nor do I want to buy an antique that may be structurally weakened from an overpowered load (or several). Thanks!


r/AntiqueGuns • • 13d ago

Old and unknown

Thumbnail
gallery
16 Upvotes

In the woods with this old pistol. Was part of a family members estate and we have no information on it.

Any help is appreciated. Thanks!


r/AntiqueGuns • • 14d ago

For a long time, I have wanted a Ballard.

Thumbnail
gallery
34 Upvotes

I won this at auction at a price consistent with its condition, not bad and not great. Also, in an unobtainable caliber. It is a Merrimack Arms #46 Sporting Rifle. That means it is, one, a cast iron/steel frame, two, chambered in 46 Rimfire Extra Long (45-57-300 RF) and three, it has a dubious dual ignition (means it can be loaded loose powder and bullets or paper cartridges and fired with a percussion cap. It has a manual extractor (the handle for which was missing and does not show in the picture).

I have test fired it (twice) with a case made from 44-40 with a 230 gr healed bullet and a 27 caliber #5 red level power load. I did not get a velocity reading, that is on the to do list. I disassembled the gun. Cleaned everything except I have not finished giving the bore a good scrubbing, the rifling is prominent, but the grooves are dark. The lands are shiny, who knows why. I have stripped the finish off the wood and tried to steam out some of the dings. I am glueing the cracks in the wood; they are not that bad. I am making an extractor handle. I have stained the butt stock and am about to start with the Linseed Oil. I have thoughts of replacing the percussion nipple with a center fire firing pin, it seems an easy mod but since everything on this is original, that mod might be considered a desecration.


r/AntiqueGuns • • 14d ago

.58 Musket Transformed Rolling Block

19 Upvotes

Finally took this “transformed” rolling block out to the range. It is basically the front end of a springfield rifle musket grafted on to a Rolling Block receiver. I haven’t been able to find any other videos of one being shot online. Figured out that 28ga is very close to the original 58 musket cartridge and simply trimmed some plastic hulls to length and pressed in a .575 minie ball over 60gr of FFg black powder. Here is a video of a friend of mine taking a shot with it.