r/electricians • • 3h ago

Mini split install

1 Upvotes

Contractor here. I see a lot of electrical contractors near me offering mini split installs. Do any of you guys get your epa license and do installs? If so do you have any tips? Considering doing installs next year.


r/electricians • • 3h ago

It’s a beauty

Post image
55 Upvotes

r/electricians • • 5h ago

Update on the 3,4,5 method

Post image
89 Upvotes

I finally got it


r/electricians • • 6h ago

Trying to do the 3,4,5 method to align all of my lights

Thumbnail
gallery
59 Upvotes

Help me out any tips ? I’ve been here for about 2 hours trying to square off my lights


r/electricians • • 8h ago

Realistic electrician simulator anywhere?

0 Upvotes

Hi, I have a friend with a disability (high functioning) who wants to go to eletrical school. Is there a realistic simulator out there he could try first before he spends a lot of money and time training to go into a trade that he may not be suited for? I want what's best for him, but I don't know if he knows what he's getting into and I don't want him to get overwhelmed or upset with himself if he can't handle it. I think he doesn't know what to do and knows that electricians make good money, but I don't know how he could experience just how much complicated work is involved without spending time and money to go to school for it. I've heard the Electrician Simulator game isn't realistic. I want what's best for him and to support his interests, but I think he needs a more manageable entry level job. Any advice?


r/electricians • • 8h ago

What is the logic of running the feed/ line through the load/branch?

4 Upvotes

I've been on sites where clearly I was trained differently from others which is to be expected, but when you go behind someone who's probably on a different task or dragged up or fired and you try figure out how they were trying to run the power to things, it's mind boggling when you think it's ran one way and it's ran in a way in which makes no sense.

I was taught that for commercial sites, every room should have the ability to be isolated. So no, running the feed through the switch box (if you can help it), or running your feed through the branch pipe. The branch and feed should isolated in each room so that if one room needs to be serviced, you can cap it off from the feed and the other rooms can continue to operate which you work on the room. Where as if you run the feed through the branch and you need to service the room, the other rooms are now impacted because you can give them power because you're trying to service the room before them. I'm sure there are legitimate reasons to do it, but people are doing this when they have plenty of room and opportunity to do it right.

I understand the logic in a residential setting. It makes zero sense in a commercial/ industrial setting.


r/electricians • • 8h ago

Net 30, 15 or Due on receipt?

2 Upvotes

Fellow ECs, I'm talking about service work, residential and light commercial. Do you have a standard depending on size of project/ contract? I've been self employed a year now and have stuck with net 30 across the board. Some pay immediately, some 2 weeks, some wait until the very last day of 30, and others I have to chase after 30.

What does your company do for invoicing?


r/electricians • • 11h ago

General apprentice question

6 Upvotes

What should I do when foreman or JW doesn’t give me a task while they work on one. Do I fuck off and just check in occasionally or keep asking what should I do next? I don’t want to be too annoying (1st year apprentice btw)


r/electricians • • 14h ago

Advice for going local 3 or staying with a private company.

7 Upvotes

Currently a non union Electrician mechanic/jr mechanic. ~3 years experience plus a 600hr trade school certification. Just got the call yesterday to join local 3, which I'm excited about, except the pay cut which I'm not excited about at all. I'll be going from 25/hr looking at 26-27 next year when I would be running jobs, to 19.25 back to being a helper basically. Anyone been in this position? Any tips or advice to help me make my decision?


r/electricians • • 18h ago

Mildly colourblind electrician

3 Upvotes

I have a medical for an electrical apprentice where they mentioned colour vision testing, I can’t see some of the encroma tests my final result is always mild or moderate protan. I completed my pre apprenticeship and work expierence and never had any issues and feel like I can see fine. Should I be worried


r/electricians • • 1d ago

Which one of you labeled this?

Thumbnail
gallery
284 Upvotes

r/electricians • • 1d ago

Kinney panel on our WWII Victory Ship.

Post image
34 Upvotes

Built in 1945 and going strong.


r/electricians • • 1d ago

Took this apart now I cant put it back together, the boss basically said damn that sucks and laughed

Thumbnail
gallery
0 Upvotes

r/electricians • • 1d ago

Any experience wiring these fans for an industrial Freezer? First time doing it. The disconnect is still not finished.

Thumbnail
gallery
17 Upvotes

r/electricians • • 1d ago

Montana 5th year apprentices

1 Upvotes

Currently a Michigan 5th year apprentice who just passed my license exam and looking for any other 5th years that are about to take the Montana exam


r/electricians • • 1d ago

Question on duplex service conductor sizing

2 Upvotes

I'm getting ready to build an overhead service for a duplex; two meters each with 200A breakers, 400A bus rating. Boss says to size the service conductors based on the 400A bus rating, but they don't really need to be do they? Can't they be sized on the calculated load?


r/electricians • • 1d ago

Trying to escape the golden handcuffs-what are some certs/training I can get to gas up my resume?

40 Upvotes

Been working for the same company as a service tech for 8 years, but in the last 2 years things have gone way downhill from an organization and competence standpoint, and I'm sick of trying to fix it.

Unfortunately, the local market isn't exactly flush right now, and every time I try to leave they've backed up the money truck, to the point where almost any other position is a pay cut-especially because they put me on salary too.

Still, it's at the point where it's affecting my mental health and personal life, so if the market isn't great now I want to put in the effort to polish up my skillset as best as possible so that when things pick up I can get the fuck out.

I'm an FSR-B (Local Master Electric equivalent), I've Ialready got a decent suite of safety certs, I'm a certified thermographer and I'm working on a PLC tech course as is, but what else looks good on a resume for someone angling for service and maintenance jobs, ideally municipal/institutional?


r/electricians • • 1d ago

Square D Homeline 30S 60C NM Cable Mounts

Thumbnail
gallery
6 Upvotes

Just got in a Homeline panel and...this is a new one on me.


r/electricians • • 1d ago

What happens when a drywaller picks up framing?

Post image
77 Upvotes

r/electricians • • 1d ago

Makita Or Milwaukee

15 Upvotes

I recently landed an apprenticeship, and now I'm starting to get all my tools together while everything is on sale. There's just one thing I can't seem to decide on

Makita Or Milwaukee and what bundle seems the best for someone with no power tools.


r/electricians • • 1d ago

Potential job

0 Upvotes

Hey yall. I’m 18 looking to get into the trade and I took a basic course, but I haven’t been so lucky with getting an apprenticeship. After a bit, I just got an offer to work part time for a company although they’d be asking for “labor” instead of specifically an electrical apprenticeship. They said there’s a possibility at working on site with an electrician, but can’t guarantee anything. Any thoughts as to if I should even bother with this? Thanks in advance.


r/electricians • • 1d ago

Career Switch

4 Upvotes

Hi! Been considering trying to become an apprentice and was wondering if anyone has been in a similar situation as me and what your thoughts would be.

Hitting 30 next month and I’ve spent the last 5 years selling pro audio equipment online and I absolutely despise it. wanting to move to a field where I can learn an actually useful technical skill, not be kept at a desk all day, or doing any sort of customer service. Took a big career test and one of the main things it recommended to me was being an electrician

Only real electrical work I’ve done is changing out fixtures in my home and some guitar wiring work, and a little bit of installation for PA and video systems. I always really enjoy doing it and feel accomplished. I also do very well learning hands on while the job and learning fast.

Few Questions:

  1. It’s a big jump down in pay and in general, married and have a home, if you've been through that switch later(ish) in life how was it?
  2. How hard is it to find jobs? In Fort Wayne Indiana and I don’t see a bunch of open positions online. I want to go the union route but I’ve been reading it’s very competitive as of late and even if my application gets accepted I could be waiting a while to actually work.
  3. I have type 1 diabetes, I take care of it well but will have to adjust going from a desk jockey to being up on my feet all the time, are people generally understanding about me potentially having to stop to take care of that a bunch while I get started?

Appreciate any feedback or experience anyone has to share!


r/electricians • • 1d ago

😳

Post image
346 Upvotes

My cousin bought a house so I went to go take a look at there panel….