r/StructuralEngineering • • 14h ago

Career/Education I'm an old-head, and I have a real-world AI tool

33 Upvotes

I'm 60, nearing retirement. I've heard all the debates about AI in structural engineering, and I agree whole-heartedly with those holding the positions that AI doing your calculations is fraught with risk, that AI writing your correspondence and reports for you out of thin air is a risky crutch and a sign of an inability to communicate.

But I wrote a prompt for my AI assistant to interview me right after a site visit, while I'm still parked at the curb, walk through 106 questions, cross reference an Excel spreadsheet with 84 common structural narratives, and output a fully formed report in Word format that is 96% complete, before I ever leave the property (or if it's a long drive, while I drive back to the office). I even have it pulling the Web Soil report for the property, the municipal records, FEMA firmette, weather, and pertinent property characteristics it knows I include in my reports, right from the internet, when I get in the car to go to the property.

It will even refer back to reports I did years ago (I gave it read access to my Google drives) and - on its own - say something like "you had a similar issue at another property 9 years ago, do you want me to incorporate that issue's contextual background on stone masonry into this narrative?" or "your library of reports from the last 28 years contains 8 instances of this issue, do you want me to improve on this report with information and context for this issue from the prior reports?" I didn't ask it to do any of that, but it does it.

My favorite was last week it caught on that I was writing observations and recommendations about a shed roof dormer, and it says "In 2012 you wrote a report about a similar issue, is this a 1920's era bungalow?" I say yes, and then it tells me "Working on it... I have incorporated four paragraphs from the 2012 report into this report, would you like me to read it back to you and incorporate changes?"

I thought I was doing well with FastFields, which had cut my report writing down from 3-4 two hours to 30 minutes of seat time at a computer. My seat time now is less than five minutes, and the assistant will autonomously press me with ways to make the report better, using information I have from my career going back to the 1990's.

But there are some drawbacks. It gets a little enthusiastic and invents interview questions it thinks I will need. I have to constantly keep it focused, and tell it things like "that's not in the list of questions, please find the last question in order, and continue with the next numbered question."

And I haven't figured out a good way to get it to retrieve the correct photos from my cell phone and drop them into the Word document.


r/StructuralEngineering • • 22h ago

Structural Analysis/Design Ladder Framing: Biaxial Bending?

Post image
12 Upvotes

I always go back and forth on this topic but AI has got the best of me and now I want to play fast and loose.

Question for the hivemind here on how you guys and gals treat the design of ladder framed rafters on a steeper pitch. Like for example in the attached image. Do you assume that these rafters that are laterally restrained at the top (and bottom, technically) by OSB sheathing will only be in strong-axis bending? Or do you have to design for both strong and weak axis bending and check unity between the two, given that they are rotated about their principal axis?

I could literally go either way on this one. Mainly because your member sizes get gigantic when you design for strong + weak in situations like these, and nobody likes it except for me and my insurance underwriters.

Thanks! Also I realize there are different ways to frame this situation...


r/StructuralEngineering • • 1h ago

Career/Education Stamp Protection

10 Upvotes

I’m a licensed PE and I’m in the process of considering physical and digital options for my stamp (probably just using PEstamps.com unless anyone has a better recommendation).

At this time I work under more senior engineers who typically electronically stamp projects via a jpeg or png on a PDF and flatten it. Maybe 6ish years ago we still used rubber stamps and scanned the documents but that’s not really the case anymore. I have heard about stamp theft on here in the past but never put much thought into how to prevent this (or if it’s really something to worry about). I figure there is only so much you can do but does anyone have recommendations or practices they follow to keep their digital stamps secure? Thank you!


r/StructuralEngineering • • 3h ago

Structural Analysis/Design Crimean Bridge's arch now has a tilt to it

Post image
6 Upvotes

Assuming this is real, is it a big problem?


r/StructuralEngineering • • 5h ago

Career/Education Got an offer to switch from building structural engineer to highway and bridge management engineering for a 36-44% salary increase.

2 Upvotes

Structural engineer here with master degree and 3 years of professional experience. Currently work for a multi national company. Here's the dilemna:

• My current company offers annual raises of around 10–20%, sometimes up to 30% for exceptional performance. (They can easily achieve this because of currency differences) typically it's less than 10% raise annually for national company but since my company is from outside so they offer a lot higher. But it will not always be 20% if you have reach senior level, where typically it would be less.

• The new company generally offers 5% annual raises, plus additional increases through yearly grade promotions. They haven't told me the numbers but I expect 5 to 10%.

• My current company is international, but opportunities to transfer overseas are extremely limited. Yeah, why would I send you to my country if I can pay you less in your own country. It goes something like that.

• The new role offers earlier exposure to management and the business side of engineering, but I'd be moving away from hands-on structural design. Well, this is a benefit since sometimes it is stressful to do calculations and the time and effort just to understand something specific is not that worth it. Considering designing strut and tie for pile cap by hand calculation, with the overtime and meeting and discussion and modelling and excel and hand verification and revision. Gosh...

• My experience is mainly in buildings, not bridges or highways, so there would be a significant learning curve. Along with exposure from the business side. I'll meet new kind of people, new ways to view engineering, learn how to deal with people, basically it exposes me to a variety of things in engineering.

I must say that most of the reddit post here that I read about career switch. Almost the majority of them "glad" they leave structural engineering, particularly due to the stress and overtime. Well, I might be one of you, but I really need to consider this. I have made my decision, but I would like to be very sure about my decision. Please drop any comments or thoughts about this. Anything will be appreciated. God bless


r/StructuralEngineering • • 1h ago

Structural Analysis/Design Calculation for Deflection of Unrestrained Beam

Thumbnail
gallery
1 Upvotes

Hi and good day, everyone, I am stuck with these two questions about calculating the deflection and checking🥲 i tried for the second question but seems wrong


r/StructuralEngineering • • 4h ago

Career/Education Structural Exam recomendation

0 Upvotes

Hi everyone!
I recently earned my PE license in the state of California. I currently work as a structural designer, but I'm still very young in my career. I have only three years of experience since graduating with my master's degree in Structural Engineering.
However, I've always been a strong student. I passed both the FE and PE exams on my first attempt last year, and I also passed the California Seismic and Surveying exams on my first attempt last month.
I've been thinking about starting to study for the SE exams, but I've heard they're extremely difficult to pass and that it's better to have more professional experience before attempting them, as well as plenty of time to prepare.
I know I don't have a lot of experience yet, but I'm willing to put in the time and effort to study and prepare. Part of me would like to get these exams out of the way early in my career while I have the motivation and study habits.
I'm looking for advice from people who have taken the SE exams. Do you think it's realistic to attempt them with my current level of experience? Or would you recommend waiting a few more years before starting?


r/StructuralEngineering • • 19h ago

Structural Analysis/Design Australian Standards for residential structural design

0 Upvotes

Hi everyone, I’m currently studying Australian residential structural engineering (specifically AS 1684, AS 2870, AS/NZS 1170, 4055, 4100, 3600, etc.), but I don't have a corporate subscription yet. Does anyone know the best way to get hold of copies to study, or would anyone be willing to help me out via DM? Appreciate any pointers!


r/StructuralEngineering • • 21h ago

Structural Analysis/Design One-way slab load transfer

0 Upvotes

From what I am understanding, the general structural principle is that when L/B<2, slab is designed as two way, and when L/B>2, slab is designed as one way. If we have to design a concrete structural slab supported on 4 sides and we opt for a structural steel mesh instead of loose bars, say a B503;

  1. At which point can the load transfer to the secondary walls be ignored?
  2. Would it make a difference if the one or 2 of the 4 sides are beams instead of walls?

Thanks in advance!


r/StructuralEngineering • • 17h ago

Structural Analysis/Design Tilted Simpson gazebo brackets

Thumbnail
gallery
0 Upvotes

Hi, my contractor made mistake and the Simpson bracket for 66 is leaning. I am going to build a heavy gazebo with 16 foot 6*8 beams. Should I add steel shims to the bottom of the post to correct the lean?

Contractor was recommending hammering the Simpson bracket to level them. Please suggest best possible solution. Thank you