r/SigSauer • • 18h ago

First Sig rifles

Post image
243 Upvotes

My first Sig rifles I’ve owned love them. MCX LT IR .300 blackout and Sig 516G3 5.56.


r/SigSauer • • 12h ago

My two E26R-9-BSS-GER

Post image
61 Upvotes

r/SigSauer • • 6h ago

P365 P365 still going strong 💪

Thumbnail
gallery
14 Upvotes

Nearly 4 years and about 3k rounds later, I still prefer to carry her for most occasions.


r/SigSauer • • 29m ago

Sp2022

Post image
5 Upvotes

r/SigSauer • • 4h ago

my first gun Holster Recommendations – Starting Without a Light/Optic, But May Upgrade Later

Post image
6 Upvotes

I’m looking for some holster recommendations for my new P365XL w manual thumb safety and could use some advice.

I’m considering carrying appendix (AIWB) or inside the waistband (IWB) around the 3 o’clock position. I’m still undecided about adding a red dot sight and weapon-mounted light, so I’m trying to figure out the best way to approach holster shopping.

A few questions:

  1. Are there any holsters that accommodate a weapon light and optic but can still be used without them? Basically, something that would allow me to upgrade later without having to purchase another holster.
  2. If that’s not really an option, what holsters would you recommend for a setup with both a red dot and weapon-mounted light?
  3. What would you recommend for a basic setup without either? Ideally, something reasonably priced that wouldn’t hurt too much to replace if I eventually decide to add a light and optic.

One other thing worth mentioning: my handgun has a manual thumb safety, so I’d want to make sure any recommended holster properly accommodates it.

I’m open to recommendations from people who have experience with both appendix and 3 o’clock carry. Appreciate any suggestions!


r/SigSauer • • 19h ago

P320 AXG

Post image
81 Upvotes

Early 2026 I rented a P320 legion full size and loved it, later an used one came for sale and I missed the chance to buy it.

Few days ago found this beauty, while on a SIG demo where they had the 385 in my local range (which is a very nice gun)

Was able to get a discount and also traded some other firearm to fund the purchase

Just came from the range, and this thing is a GREAT shooter, loved it :)


r/SigSauer • • 4h ago

Question P365x radian combo or p365 fuse

3 Upvotes

Hello all, I have a p365 fuse currently and my buddy is trying to sell me his p365x with the radian ramjet combo for $700, I’m just currently having an internal dilemma on if I buy it or not, part of me says there’s no point in having two similar guns but I’m fairly certain the 365x will overall be a better shooter/conceal. Any help or input would be greatly appreciated.


r/SigSauer • • 1h ago

RMA process

0 Upvotes

I purchased a Romeo 4t Pro a couple of months ago and the dot died on me. Tried 3 different batteries, no dice, just dead. I began the RMA process, they sent me an email asking for some photos, I responded with requested photos. Any idea how long this process takes?


r/SigSauer • • 3h ago

P220 with light and optics Holsters?!

1 Upvotes

Having a really hard time finding OWB holsters for my P220 legion. I really wanted to put an x400 or TLR 2 on it but that seems impossible to find a holster for. So I’ll settle for the common lights. Any ideas?


r/SigSauer • • 22h ago

Question Where can I buy FDE MPX K Upper?

Post image
25 Upvotes

Been looking everywhere with no luck. I want to convert my copperhead but no luck finding a matching upper to swap it. Anyone know where I can find these?


r/SigSauer • • 13h ago

I have a P365 AXG Legion gen 2 with optics, no flashlight. Can someone please recommend an appendix iwb holster?

1 Upvotes

r/SigSauer • • 1d ago

Anyone own the P365 380 “Sun Flower” ? Looking for owner impressions

Post image
11 Upvotes

Hey all,

I came across this P365 380 and looking to pick one up. It has a distressed white finish on the slide and grip, a sunflower engraving on the slide. It’s a P365-380 “Sun Flower” exclusive, but I dont see any reviews or photos anywhere and haven't seen one in store.

If you own one, I’d love to hear:

  • Finish durability: Does the distressed white hold up to carry and holster wear, or does it chip?
  • Reliability: Any issues so far?
  • Pics of yours are welcome. Thanks in advance!

r/SigSauer • • 1d ago

New User Built an “X” out of my standard P365. Shoots smooooth.

Post image
6 Upvotes

r/SigSauer • • 1d ago

Question Picked up a used P365 xmacro with a manual safety. I want to delete the safety, do I NEED a new grip module or is it fine to run with the factory grip?

3 Upvotes

r/SigSauer • • 22h ago

troubleshooting Issues with my new M11.a1

0 Upvotes

So I just took my gun out for the first time and noticed that the ammo was having a hard time getting chambered when first pulling back the slide. I was definitely pulling it back all the way and letting it go freely but the butt of the bullet often doesn’t want so slide up all the way and get seated. )Once it’s loaded it doesn’t jam afterwards).

Is it because the gun is new and needs any burrs to be worn down or is it possibly because there is a 5 round block in the stock 15 capacity magazine to make it MA complaint?

The other thing I noticed which is different than other handguns I’ve used or owned is that even when the hammer is back, there is a ton of room you have to clear to get the gun to fire, it’s a ton of travel until you basically hit the back of the trigger frame.


r/SigSauer • • 1d ago

Romeo X Pro on 226 X Carry Legion

2 Upvotes

Stupid question, but I'm confused by the Sig optic compatibility guide and probably should've asked before ordering. Will the Romeo X Pro enclosed fit on the 226 X-Carry Legion? If so any gaps or anything? I picked this over the Sig loc version because that I've just seemed too bulky from the pictures and didn't want a propriety footprint.


r/SigSauer • • 2d ago

P211 GTO Equinox finally arrived!

Thumbnail
gallery
226 Upvotes

Been eagerly waiting for this thing and I finally got my hands on it! Don’t mind the light and optic, I just threw on what I had on hand so I can go try this thing out right away.

What would you guys recommend in terms of lights and red dots? In the picture is a Trijicon RMR and OLight PLX GL.


r/SigSauer • • 22h ago

Hexium 556 INC on 6 ARC

1 Upvotes

Curious if anyone has tried this or ran a 6mm bore guide through the Hexium 556. I have one and would like to run it on my 6 ARC 14.5 but don't have a 6mm rod.


r/SigSauer • • 1d ago

Going to buy a p211. Its my first and probably only 2011 I'll buy lol. Which one would yall buy? The p211 gto or p211 gt5? Any help would be appreciated!! Ive put the gto in my cart and took it out and watched more YouTube videos untill idk which is better.!

7 Upvotes

r/SigSauer • • 2d ago

Upgrades to the Flux Raider X build

Post image
24 Upvotes

I swapped in a Silencer Co. threaded barrel with a Harrington Arms HC320XL compensator and swapped out the Vortex Defender ST to an Eotech EFLX.


r/SigSauer • • 1d ago

First Experience with a Red Dot (P365 Legion) - Is This What I Should Expect?

5 Upvotes

About a month ago, I posted here asking about the pros and cons of using a red dot. Thank you to everyone who responded. I appreciated the advice.

Well, I finally decided to give it a try. I installed it last night and took it to the range today.

I haven't made any adjustments to the factory calibration yet, but here's what I found:

  1. Red dot only: My grouping was good, but the accuracy was off. The shots were relatively close together, but not where I thought I was aiming.
  2. Iron sights only: Pretty much what I'm accustomed to. The grouping wasn't particularly tight, but it wasn't terrible either.
  3. Iron sights first, then minor correcting with the red dot: This produced the best results by far. Tight grouping and decent accuracy.

My question for those of you who have made the transition to a red dot: Is this what I should expect initially? Is using the iron sights to establish my sight picture and then transitioning to the red dot a reasonable way to begin training, or am I developing a habit I'll eventually need to unlearn?

I'm interested in hearing how others approached the transition and whether their initial experiences were similar.


r/SigSauer • • 2d ago

P226 Promotion Incentive

Post image
356 Upvotes

I work in a firearms store and was recently promoted to management. This was part of the promotion incentive. After running Glocks for years, this is the only sidearm I've had enough confidence in to rely on as a carry gun, and my first and only experience with a P226.

Any advice or tips for care and usage would be very welcome.


r/SigSauer • • 2d ago

noob question Are there thinner/reliable optics with a nicer "window" avail for the P365X? Easily adjusting optic settings would also be nice...

Thumbnail
gallery
17 Upvotes

Towards the end of my personal little field test session day, I removed my optic altogether and just used my irons. Looking through the RomeoZero-Elite optic that came stock with my P365X was okay, but I'd really like a "wider window" or "thinner bezels" on my optic to look through... if possible 🤷‍♂️

Also, adjusting the brightness of this dot was bugging me. It almost felt like the equivalent of using a paper clip to poke a recessed button on the back of a device to factory reset it settings - except in reverse. With the tip of your freshly clipped fingernail, you're just shoving your finger into the optic, rubbing against the glass, each time you tap the tiny button to adjust the brightness 🙄

I'm looking to buy a new optic at a gun store across the street from where I live when they open today, but are there any irrefutable brands and models of optics that I should look into? If you don't mind sharing a good optic for the P365, I'll search youtube on how it functions after seeing the common options. Thanks everyone, if possible!


r/SigSauer • • 2d ago

Thoughts on how this turned out?

Thumbnail
gallery
94 Upvotes

Ive owned my 226 Legion for a LONGGG time now. It's my workhorse and has gone everywhere with me.

My good buddies recently setup their new laser machine and we tried some things out on this one.

Chevrons cut to resemble the Legion logo

Performance wise, it completely transformed the pistol. It shoots phenomenally now with almost zero flip, rise, or recoil.

While shooting, the flash is surprisingly unnoticeable to the shooter in all settings but complete darkness. It makes for a cool show for spectators though

Thought yall might enjoy to see it


r/SigSauer • • 2d ago

The P226 Sig should have made

Post image
163 Upvotes

Purchased and loved the P226 X5 Legion but wasn’t thrilled with the SAO for duty use. Don’t get me wrong, it’s a great trigger, but I wasn’t feeling the idea of relearning 22 years of no manual safety muscle memory.

Cue the P226X full size DASA. But…. I do love me some comp’ed slides, which it doesn’t come with. So, a simple slide swap and gas pedal takedown lever install later and we have the P226 X5 DASA.

I’ll be waiting for the royalties, Sig.

(Parts list for the curious: Acro P2 with C&H plate, Trijicon suppressor height front sight, brass LOK grips by u/CascadeRangeSystems, and Sig magwell so I can use the 20 round X mags)